"Healthy" out of 'crsctl check crs' Cluster but not healthy?
CRS version: 11.1.0.7Platform: Solaris 10
Hi volunteers,.
Due to a hardware problem, image of our entire cluster of the CARS had to be taken and replicated on different machines (node 2 CARS)
In the new host.
crsctl check crs showing all be healthy.
$ crsctl check crs
Cluster Synchronization Services appears healthy
Cluster Ready Services appears healthy
Event Manager appears healthy
But none of the resources were in an online state in the output of crs_stat.The local file system hosting the ORACLE_HOME and CRS_HOME were showered themselves mysteriously. 2 to 3 GB in 1-2 minutes!
I remember to remove core files dump, .aud, ASM, the CRS and RDBMS directories .trc files.
When I tried to start ASM using sqlplus or using srvctl, I got the below error
srvctl start asm -n brcfrac214
PRKS-1009 : Failed to start ASM instance "+ASM1" on node "brcfrac214", [PRKS-1009 : Failed to start ASM instance "+ASM1" on node "brcfrac214",
[CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.brcfrac214.ASM1.asm' has placement error.]]
Later Solaris Admin discovered that the hostname (for node1) has been configured incorrectly (misspelled in a config file!)Go back to correct the host name more reboot fixed the problem.
1.
Why "crsctl check crs' output showed everything to be in good health despite a serious question?
2.
What would be the first few things that you would look for when no resources in crs_stat are online?
3.
Should I find any irregularities in the ps output ef below?
ps -ef | grep "init\."
4.Would be the first sign of a major problem of cluster is not forthcoming ASM?
Thank you.
1. healthy for check crsctl crs simply means that the processes are running. It does not check that the resources are offline.
2. you must check clusterware newspapers; http://docs.Oracle.com/CD/B28359_01/RAC.111/b28255/troubleshoot.htm#BEHGFGFJ first and second http://docs.oracle.com/cd/B28359_01/rac.111/b28255/troubleshoot.htm#CHDFJIEG
Edited by: P. Forstmann March 6 2012 18:56
Tags: Database
Similar Questions
-
Hi all
I have an instance RAC 11 GR 2 with 2 nodes running 11.2.0.3 on OEL 5 day 8 64-bit environment
After a physical reboot of the node1 the cluster on node 1 will not start
When I try to run the command on node 1 below
$GRID_HOME/bin/crsctl check crs
the following error appears
CRS-4638: Oracle high availability Services is online
CRS-4535: cannot communicate with Cluster Ready Services
CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
CRS-4534: can not communicate with the event Manager
Cluster node 2 and db instance on node 2 is running.
When I try to run the command on node 1 below
# ps - ef | grep d.bin
root 7548 1 0 19:58? 00:00:05 /oracle/app/11.2.0/grid/bin/cssdmonitor
root 9295 1 0 17:06? 00:01:03 /oracle/app/11.2.0/grid/bin/ohasd.bin restart
Oracle 10085 1 0 17:07? 00:00:08 /oracle/app/11.2.0/grid/bin/oraagent.bin
Oracle 10097 1 0 17:07? 00:00:00 /oracle/app/11.2.0/grid/bin/mdnsd.bin
Oracle 10107 1 0 17:07? 00:00:08 /oracle/app/11.2.0/grid/bin/gpnpd.bin
root 10118 1 0 17:07? 00:00:04 /oracle/app/11.2.0/grid/bin/orarootagent.bin
Oracle 10121 1 0 17:07? 00:00:34 /oracle/app/11.2.0/grid/bin/gipcd.bin
root 10135 1 6 17:07? 00:13:10 /oracle/app/11.2.0/grid/bin/osysmond.bin
root 10327 1 0 17:07? 00:00:52 /oracle/app/11.2.0/grid/bin/ologgerd - M d /oracle/app/11.2.0/grid/crf/db/srv-bioradb1
root of 11917 10052 0 20:32 pts/1 00:00:00 grep d.bin
looking forward to doc or recommendation how to start clusterware on node1
Thanks and greetings
SoniHello
Offering to see metalink doc below.
Top 5 Grid Infrastructure startup problems [ID 1368382.1]
Thank you
-
I bought lightroom and need to register my student ID, how do I do that the trial has run out, I have the product code but not the serial number?
If you have purchased a package, then you should have instructions in the box on how to present your credentials. If you have purchased Adobe online, then you should have received instructions in an email. But here is a link that might help you. There is a link under step 2 which will lead you to a place where you can enter the information, I think.
Adobe - Adobe Education Store: proof of academic identification
-
Check for Wifi but not connected
Hello
I try to detect the State when the wifi is enabled but not connected to a wireless network:
if(RadioInfo.getSignalLevel(RadioInfo.WAF_WLAN)==RadioInfo.LEVEL_NO_COVERAGE){
but it does not work. What is the correct way to do this?
Check the radioinfo to be connected, but not being coverageinfo is not on the level of correct coverage.
-
CRS starts does not after reboot
Hello
I just installed RAC in a test environment using vmware server 2. I have Oracle Enterprise Linux 5 and used oracle 11g (11.2.0.1). I have not yet installed the software database and the oracle grid infrastructure has just installed.
When I restart the node and deliver 'crsctl check crs', I see after release.
[root@rac2 ~] # crsctl check crs
CRS-4638: Oracle high availability Services is online
CRS-4535: cannot communicate with Cluster Ready Services
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
Now, "crs_stat t" does not work unless I manually start the crs daemon by using the command "crsd start." Why the crs daemon starts not automatic unlike 10 g RAC. Is this a normal behavior and what is a good way to make this daemon to auto-start.
SalmanI guess you run crsctl check crs immediately after the restart. It doesn't take long for the crs start and you don't have to start it manually. By default, crs is started automatically and if for any reason any you disabled, you can enable it using 'crsctl enable the crs '.
You can also check the status of different services using the:
# crsctl check crsd -
Difference between crsctl start crs and crsctl start cluster
Hello
What is the difference between 'crsctl start crs' and new setting on 11.2 "crsctl start cluster" both have the same result?
BytesHello
'crsctl start crs' and new setting on 11.2 "crsctl start cluster" both have the same result?
We can say not having the same result.
crsctl power crs - manage start/stop the entire stack of Oracle Clusterware on one node, including the OHASD process, this command should be used only on the local node.
crsctl power cluster - managing start/stop battery Oracle Clusterware on the local node if you do not specify either - all or n and the remote nodes if option-n or - all be specified, NOT including the OHASD process. You cannot start and stop clusterware stack without running OHASD process.
Despite crsctl power crs manage all Oracle Clusterware stack on the local node crsctl power crs not allow you to manage the remote nodes, unlike crsctl power cluster which allows to manage all nodes, but if the process of KARINE is runing.
To manage Oracle Clusterware battery on remote nodes, the ohasd (Oracle high availability Services Daemon) should run on all managed nodes. (ie using crsctl start cluster - n
, ) So, if you try use crsctl start cluster node1 - n, node2 and node1 your local node and node1 or node2 OHASD don't not running this command will be fails.
Kind regards
Levi Pereira -
I have a lot of trouble recently with the release of the color range in Photoshop CC. The software is updated. I used to the Datacolor years to calibrate the system, and it worked well always. But now I noticed that I have a lot more images with out-of-gamut colors, and it prints wrong. Is this a problem with Adobe? The rest of my equipment is the same. Any help? I'd appreciate comments. Thank you, Emilio.
First, the range warning applies to the proof profile that you put in place, under test format. If this is not the profile that you want to print with, there is no relevance.
Second, range warning is a very large and imprecise indication, and I would just turn off. It shows what is out of range, but not how much. There are better ways, like proofing (even once, test format, toggle with ctrl + Y).
You can also convert a copy of the file to print your profile and look at the histogram. If you have severe cuts, you can adjust the file accordingly.
Third, there are people who feel the effect of threshold is best handled by the profile. In other words, doing nothing, just convert and done. I'm not one of them, just thought I would mention it.
------------------
Just to put us all on the same page, here are the basics:
There are three different color profiles here. The document profile, the profile of the monitor and the printer/paper/ink profile. If all of these profiles are good, the results will be consistent and predictable.
So to start with the document profile. These are important parameters in the PS color settings dialog box:
It can't be Adobe RGB, but there must be a standard color space (sRGB, Adobe RGB or ProPhoto).
Then the monitor profile. The Spyder software everything for you, and Photoshop uses this profile to display the file. You don't need to do anything once the software ran - it is all set up automatically.
You can check in Windows color management has the right profile is configured by default:
Thirdly, the profile of the printer. It's one that refers to the book as "Xxx of Epson Premium glossy", or all that apply. You choose this profile in the dialog box print in Photoshop, and then you go in the printer driver ("settings") and ensure that color management is turned off it. You don't want a double color management.
If it withdraws, and it still does not seem good, get back with more details.
Oh, by the way - have you got your NEC monitor with Spectraview calibration software included? If you did, it is greatly preferable to the Spyder software for reasons more than I have space to list here. You can still use the Spyder probe, at least if it's generation 3, 4 or 5. Earlier versions are notoriously few reliable and also not designed for wide gamut displays.
-
Send button is grayed out when I create a new message, but not when I answer.
Send button and the spell check button is grayed out - as are the format and insert menus - when I create a new message. When I reply to a message, all the buttons and menus work. If I start to answer, but change the beneficiary, subject to line and insert a completely new message, I can send it.
TBird worm 31.4.0 (installed recently. The question could have started with this installation, but I'm not sure.)
Windows 7 Pro, Version 6.1, Service Pack 1
Gmail configured according to the instructions from google.and the Send button becomes active when you actually address your mail (you can not send mail without address)
The spell check button has no content to check, so it does not work until you start to type in the body of the mail.
Even with the insertion, and menu format if you insertion point is not in the body of the email that they do not have a destination to work with.
-
Desperately need help. I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games. So I thought that I do the big thing non-technical MOM and start cleaning up the programs! Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer! I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
"your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand. Not technically minded, to take me on as a challenge! Thanks bunch :) Sarah
Desperately need help. I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games. So I thought that I do the big thing non-technical MOM and start cleaning up the programs! Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer! I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
"your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand. Not technically minded, to take me on as a challenge! Thanks bunch :) Sarah
Here is the tutorial to solve this problem. It is very involving. Please read the step by step.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlt-4-2
-
Import the button is dimmed and all photos are checked for import, but they are a different color too.
Hi kinziegirl,
This happens if you try to import images are already imported.
See a similar detailed thread Re: cannot import Images grayed out -
Kind regards
Assani
-
Hello
crsctl stop crs
This command stops only the cluster of it running? OR is it stops all the clusters of nodes?
Thanks for help.user2634108 wrote:
Hellocrsctl stop crs
This command stops only the cluster of it running? OR is it stops all the clusters of nodes?
Thanks for help.
Stop only CRS (cluster) and its related resources on that node you run it
http://download.Oracle.com/docs/CD/B19306_01/RAC.102/b14197/AppSupport.htm#BEHDCJHH
-
Hi all
I am trying to install the CRS (ORACLE RAC 11 g). installation went well. run root.sh also went well on three nodes. When I run root.sh on the last node, it is a failure.
I debugged and found that "crsctl check boot" is a failure. It gives following error message
Has no 3 to bind the endpoint listens: (ADDRESS = (PROTOCOL = tcp) (HOST = lower-priv)
I checked the file/etc/hosts. entry for bass-priv is present. in fact all the nodes have the same file/etc/hosts. bottom-priv is to ping requests form all nodes.
Please let me know what the problem is.
Thank yous ' Please check ping bottom-priv
$ ping bottom-priv
indicate which ip address
-check the /etc/nsswitch.conf dns server and then/etc/hosts:
$ grep hosts\: /etc/nsswitch.conf
hosts: files dnsIf show:
hosts: dns file
This has changed as he looked to/etc/hosts first,
hosts: dns file
Good luck
-
Fails pre-check Clusterware (11g), but where is the error?
Hello
I try to install 11g clusterware but when I run the cluster check seems to indicate an error.
How can I get more information on what is the error?-bash-3.2$ ./runcluvfy.sh stage -pre crsinst -n optest01,optest02 -verbose Performing pre-checks for cluster services setup Checking node reachability... Check: Node reachability from node "optest01" Destination Node Reachable? ------------------------------------ ------------------------ optest01 yes optest02 yes Result: Node reachability check passed from node "optest01". Checking user equivalence... Check: User equivalence for user "oracle" Node Name Comment ------------------------------------ ------------------------ optest02 passed optest01 passed Result: User equivalence check passed for user "oracle". Pre-check for cluster services setup was unsuccessful on all the nodes. -bash-3.2$ ./runcluvfy.sh comp admprv -n optest01,optest02 -verbose -o user_equiv Verifying administrative privileges Checking user equivalence... Check: User equivalence for user "oracle" Node Name Comment ------------------------------------ ------------------------ optest02 passed optest01 passed Result: User equivalence check passed for user "oracle". Verification of administrative privileges was successful. -bash-3.2$ ./runcluvfy.sh comp admprv -n optest01,optest02 -verbose -o crs_inst -orainv oinstall Verifying administrative privileges Checking user equivalence... Check: User equivalence for user "oracle" Node Name Comment ------------------------------------ ------------------------ optest02 passed optest01 passed Result: User equivalence check passed for user "oracle". Verification of administrative privileges was unsuccessful on all the nodes.
Thank you
Steve
Published by: steve_baldwin on November 24, 2008 20:46Steve,
Check the Note: 734095.1
This problem is resolved in CVU (cluvfy) available in 11.1 which can be a minimum of
http://www.Oracle.com/technology/products/database/clustering/CVU/cvu_download_homepage.htmlAlso check the Note 300548.1 for RSA and DSA
Use standard ssh if your third-party ssh product has problems.
Kind regards
Rodrigo Mufalani
-
I just bought the latest iPad and now I have restored from a backup, it has been deleted and the songs at random out of my playlists for example a playlist, used to have 534 songs (I know because they are always on my ipod) and now he has 137. Why he did I have no idea. The songs are on my Itunes yet, but not playlists which is why I think it must be some sort of bug. Help, please.
p.s. Ideally I'd like just use my ipod as a backup (can I do that?) but I can't connect to the risk to delete playlists.
See the empty/corrupted after upgrade/crash iTunes library.
TT2
-
In the menu Options Javascript is checked as active, but it is not (it has been) so I can't do certain things on certain Internet sites. I have the latest version of Firefox.I use NoScript to make the Internet open faster, does it hit?
I would turn off this add-on NoScript (and any other add-0ns you think can be done this) and see if Javascript works as it should. If it performs as it should then it would be reasonable to assume that NoScript is causing the problems you are having. If you want to continue using this module, or you can leave the add-on disabled, I would visit the Add-ons site for additional support for this problem.
Maybe you are looking for
-
What is an add-on safe to download youtube audio, something of virus and malware free.
I want to download youtube audio but very afraid of Add-ons Firefox because of viruses and malware. All of the recommendations that are safe? Thank you.
-
Hello I have a Tablet turn 810 that worked perfectly, but recently, I used the softpaq Download Manager and updated all of the hp software to the latest available versions. I also updated the bios with the latest version (Canada.47 I think). However,
-
The TOSHIBA for Bluetooth ACPI driver update failed
Hi all I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't. When I tried to download the latest version of the driver it says that I have the latest version of the driver.He also says that the device is functioning prop
-
Problems of deployment OR after Windows Update
After completing an update of Windows, all my installers of studio project of measurement (using the configuration and deployment of VS 2010 project) stopped including the VC merge modules ++. Long story short, the update improved my Microsoft_VC100_
-
Help! I have linux redhat 5 and installed the last base of nor-daq drivers 3.4.0f2. I see my Board from national instruments pci-6070e running lspci: 07:04.0 class ff00: National Instruments PCI-MIO-16-1 But when I run lsdaq, I he found nothing: