$GRID_HOME/bin/crsctl check crs fails with CRS-4535: cannot communicate wit

Similar Questions

• BECAUSE 11g Installation fails, saying "$GRID_HOME/bin/crsctl: no such file or directory".

  Hi all

  I have the problem mentioned below.

  Some time ago, I installed Oracle 11 g RAC. As long as this installation failed, I removed at home of the grid and home of the database using 'rm', rather than uninstalling as uninstall failed during execution. Now, when I do a new installation of Oracle 11 g RAC, I get the response below when running from $GRID_HOME/root.sh:

  [code]

  [root@racnode2 oracle] # /u02/app/11.2.0/grid/root.sh

  Run the script root.sh from Oracle 11 g...

  The following environment variables are defined as:

  ORACLE_OWNER = grid

  ORACLE_HOME = /u02/app/11.2.0/grid

  Enter the full path of the local bin directory: [/ usr/local/bin]:

  The 'dbhome' file already exists in the usr.  Overwrite it? (y/n)

  [n]: y

  Copying dbhome to usr...

  The 'oraenv' file already exists in the usr.  Overwrite it? (y/n)

  [n]: y

  Copying oraenv to usr...

  The 'coraenv' file already exists in the usr.  Overwrite it? (y/n)

  [n]: y

  Copying coraenv to usr...

  Entries will be added to the/etc/oratab file according to the needs of

  Assistant configuration database when a database is created

  Finished to turn the generic part of the root.sh script.

  Now root product-specific actions will be performed.

  2013-08-28 00:15:36: analyzing the host name

  2013-08-28 00:15:36: verification of superuser privileges

  2013-08-28 00:15:36: user has superuser privileges

  The file of configuration settings using: /u02/app/11.2.0/grid/crs/install/crsconfig_params

  Create the trace directory

  A bad configuration Oracle Clusterware found on this host

  Unconfigure the existing cluster configuration before you start

  to configure a new Clusterware

  Run "/u02/app/11.2.0/grid/crs/install/rootcrs.pl - deconfig".

  to configure the configuration has failed, then repeat the root.sh

  [code]

  I ran "/u02/app/11.2.0/grid/crs/install/rootcrs.pl - deconfig", but I have the errors below:

  [code]

  [root@racnode2 oracle] # /u02/app/11.2.0/grid/crs/install/rootcrs.pl - deconfig

  2013-08-28 00:17:19: analyzing the host name

  2013-08-28 00:17:19: verification of superuser privileges

  2013-08-28 00:17:19: user has superuser privileges

  The file of configuration settings using: /u02/app/11.2.0/grid/crs/install/crsconfig_params

  Default: no such file or directory /u02/app/11.2.0/grid/bin/crsctl order check the cluster racnode2 - n

  Default: no such file or directory /u02/app/11.2.0/grid/bin/crsctl order check the cluster racnode2 - n

  Oracle Clusterware stack is not active on this node

  Restart the clusterware stack (use /u02/app/11.2.0/grid/bin/crsctl start crs) and try again

  Impossible to check resources

  [root@racnode2 oracle] # /u02/app/11.2.0/grid/bin/crsctl start crs

  -bash: /u02/app/11.2.0/grid/bin/crsctl: no such file or directory

  [code]

  In fact, there is no "crsctl" under GRID_HOME/bin.

  OS: Linux

  If anyone can help. I am willing to provide any information.

  Thank you

  ...

  Hi snowflake, '

  Since u removed directories using the "rm" command, it removes only the installed files. There are some entries will be in/etc/oracle, / etc/inittab and some symlinks in /etc/rc.d (1,2,3,4,5,6) files. You must manually but carefully remove these entries, then force kill any crs, jar css process and reboot the machine. so no crs, css he's start at the start of the process. And then repeat the fresh install.

  Kind regards

  Pradeep. V

• "Healthy" out of 'crsctl check crs' Cluster but not healthy?

  CRS version: 11.1.0.7
  Platform: Solaris 10
  
  Hi volunteers,.
  
  Due to a hardware problem, image of our entire cluster of the CARS had to be taken and replicated on different machines (node 2 CARS)
  
  
  In the new host.
  crsctl check crs showing all be healthy.

  $ crsctl check crs
  Cluster Synchronization Services appears healthy
  Cluster Ready Services appears healthy
  Event Manager appears healthy

  But none of the resources were in an online state in the output of crs_stat.
  The local file system hosting the ORACLE_HOME and CRS_HOME were showered themselves mysteriously. 2 to 3 GB in 1-2 minutes!
  
  I remember to remove core files dump, .aud, ASM, the CRS and RDBMS directories .trc files.
  
  When I tried to start ASM using sqlplus or using srvctl, I got the below error

  srvctl start asm -n brcfrac214
  PRKS-1009 : Failed to start ASM instance "+ASM1" on node "brcfrac214", [PRKS-1009 : Failed to start ASM instance "+ASM1" on node "brcfrac214", 
  [CRS-1028: Dependency analysis failed because of:
  CRS-0223: Resource 'ora.brcfrac214.ASM1.asm' has placement error.]]

  Later Solaris Admin discovered that the hostname (for node1) has been configured incorrectly (misspelled in a config file!)
  Go back to correct the host name more reboot fixed the problem.
  
  1.
  Why "crsctl check crs' output showed everything to be in good health despite a serious question?
  
  
  2.
  What would be the first few things that you would look for when no resources in crs_stat are online?
  
  3.
  Should I find any irregularities in the ps output ef below?
  

  ps -ef | grep "init\." 

  4.
  Would be the first sign of a major problem of cluster is not forthcoming ASM?
  
  
  Thank you.

  1. healthy for check crsctl crs simply means that the processes are running. It does not check that the resources are offline.
  2. you must check clusterware newspapers; http://docs.Oracle.com/CD/B28359_01/RAC.111/b28255/troubleshoot.htm#BEHGFGFJ first and second http://docs.oracle.com/cd/B28359_01/rac.111/b28255/troubleshoot.htm#CHDFJIEG

  Edited by: P. Forstmann March 6 2012 18:56

• After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  What can I do?

  Have you tried what he says in the link I provided?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

  Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

  Hi Rachel,

  I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?

  • Using a cable or a wireless Internet connection?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  I suggest you to follow the methods in this article and check if it helps.
  http://support.Microsoft.com/kb/2779064/en-us

  Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

• crsctl check startup fails

  Hi all
  I am trying to install the CRS (ORACLE RAC 11 g). installation went well. run root.sh also went well on three nodes. When I run root.sh on the last node, it is a failure.
  
  I debugged and found that "crsctl check boot" is a failure. It gives following error message
  
  Has no 3 to bind the endpoint listens: (ADDRESS = (PROTOCOL = tcp) (HOST = lower-priv)
  
  I checked the file/etc/hosts. entry for bass-priv is present. in fact all the nodes have the same file/etc/hosts. bottom-priv is to ping requests form all nodes.
  
  Please let me know what the problem is.
  
  Thank you

  s ' Please check ping bottom-priv

  $ ping bottom-priv

  indicate which ip address

  -check the /etc/nsswitch.conf dns server and then/etc/hosts:

  $ grep hosts\: /etc/nsswitch.conf
  hosts: files dns

  If show:

  hosts: dns file

  This has changed as he looked to/etc/hosts first,

  hosts: dns file

  Good luck

• ECM data collection failed with the error «Cannot run the pre-load...» »

  Hey all,.
  
  I'm meeting a very strange question. I code a metric ECM for my plugin to mongo database. After he has deployed to EM, even if the data collection was all right (Agent browser check and download folder on the server agent) and the GCED table was created after the expanded plugin, data were load into the ECM table failed.
  
  Here is the definition of XML.
  -targetType

    <Metric NAME="CheckServiceConf" TYPE="RAW" CONFIG="TRUE">
      <Display>
        <Label NLSID="omd_ecm_checkserviceconf">CheckServiceConf</Label>
      </Display>
      <TableDescriptor TABLE_NAME="MGMT_EMX_MONGO_SERVICE_CONF">
        <ColumnDescriptor NAME="Host_Name" COLUMN_NAME="HOST_NAME" TYPE="STRING" IS_KEY="TRUE" />
        <ColumnDescriptor NAME="Port" COLUMN_NAME="PORT" TYPE="NUMBER" IS_KEY="TRUE" />
        <ColumnDescriptor NAME="Config_File" COLUMN_NAME="CONFIG_FILE" TYPE="STRING" IS_KEY="FALSE" />
        <ColumnDescriptor NAME="Data_Path" COLUMN_NAME="DATA_PATH" TYPE="STRING" IS_KEY="FALSE" />
        <ColumnDescriptor NAME="Log_File" COLUMN_NAME="LOG_FILE" TYPE="STRING" IS_KEY="FALSE" />
        <ColumnDescriptor NAME="Is_Sharding_Server" COLUMN_NAME="IS_SHARDING_SERVER" TYPE="STRING" IS_KEY="FALSE" />
        <ColumnDescriptor NAME="Replication_Set_Name" COLUMN_NAME="REPLICATION_SET_NAME" TYPE="STRING" IS_KEY="FALSE" />
        <ColumnDescriptor NAME="Is_Config_Server" COLUMN_NAME="IS_CONFIG_SERVER" TYPE="STRING" IS_KEY="FALSE" />
        <ColumnDescriptor NAME="List_of_Config_Servers" COLUMN_NAME="LIST_OF_CONFIG_SERVERS" TYPE="STRING" IS_KEY="FALSE" />
        <ColumnDescriptor NAME="Max_Connections" COLUMN_NAME="MAX_CONNECTIONS" TYPE="NUMBER" IS_KEY="FALSE" />
        <ColumnDescriptor NAME="Oplog_Size" COLUMN_NAME="OPLOG_SIZE" TYPE="NUMBER" IS_KEY="FALSE" />
        <ColumnDescriptor NAME="Instance_Version" COLUMN_NAME="INSTANCE_VERSION" TYPE="STRING" IS_KEY="FALSE" />
        <ColumnDescriptor NAME="OS_Process" COLUMN_NAME="OS_PROCESS" TYPE="STRING" IS_KEY="FALSE" />
        <ColumnDescriptor NAME="OS_Process_ID" COLUMN_NAME="OS_PROCESS_ID" TYPE="NUMBER" IS_KEY="FALSE" />
      </TableDescriptor>
      <QueryDescriptor FETCHLET_ID="OSLineToken">
        <Property NAME="emdRoot" SCOPE="SYSTEMGLOBAL">emdRoot</Property>
        <Property NAME="scriptsDir" SCOPE="SYSTEMGLOBAL">scriptsDir</Property>
        <Property NAME="perlBin" SCOPE="SYSTEMGLOBAL">perlBin</Property>
        <Property NAME="host" SCOPE="INSTANCE" OPTIONAL="TRUE">host</Property>
        <Property NAME="port" SCOPE="INSTANCE" OPTIONAL="TRUE">port</Property>
        <Property NAME="uname" SCOPE="INSTANCE" OPTIONAL="TRUE">uname</Property>
        <Property NAME="pass" SCOPE="INSTANCE" OPTIONAL="TRUE">pass</Property>
  
        <Property NAME="mydelimiter" SCOPE="INSTANCE">mydelimiter</Property>
        <Property NAME="command" SCOPE="GLOBAL">"/usr/bin/perl" -I "%scriptsDir%/emx/%TYPE%" "%scriptsDir%/emx/%TYPE%/CheckServiceConf.pl" "%host%" "%port%" "%uname%" "%pass%" "%mydelimiter%"</Property>
        <Property NAME="delimiter" SCOPE="GLOBAL">%mydelimiter%</Property>
        <Property NAME="startsWith" SCOPE="GLOBAL">em_result=</Property>
        <Property NAME="errStartsWith" SCOPE="GLOBAL">em_error=</Property>
        <Property NAME="em_metric_timeout" SCOPE="GLOBAL">300</Property>
      </QueryDescriptor>
    </Metric>

  -collection metadata

    <CollectionItem NAME="CheckServiceConf" UPLOAD_ON_FETCH="TRUE" CONFIG="TRUE">
      <Schedule OFFSET_TYPE="INCREMENTAL">
        <IntervalSchedule INTERVAL="12" TIME_UNIT="Hr" />
      </Schedule>
      <MetricColl NAME="CheckServiceConf" />
    </CollectionItem>

  -snapshot type metadata

  <METADATAS>
    <METADATA SNAP_TYPE="CHECK_SERVICE_CONF" TARGET_TYPE="mongo_database" VER="1" COMPARE_IGNORE="N" COMPARE_UI_IGNORE="N" HISTORY_IGNORE="N" HISTORY_UI_IGNORE="N" UI_IGNORE="N" DROP_EXISTING_DATA="Y">
      <METADATA_UI_NAME>CheckServiceConf</METADATA_UI_NAME>
      <TABLE NAME="MGMT_EMX_MONGO_SERVICE_CONF">
      <UI_NAME>CheckServiceConf</UI_NAME>
        <COLUMN NAME="HOST_NAME" TYPE="STRING" TYPE_FORMAT="512" IS_KEY="Y" >HOST_NAME</COLUMN>
        <COLUMN NAME="PORT" TYPE="NUMBER" IS_KEY="Y" >PORT</COLUMN>
        <COLUMN NAME="CONFIG_FILE" TYPE="STRING" TYPE_FORMAT="512" IS_KEY="N" >CONFIG_FILE</COLUMN>
        <COLUMN NAME="DATA_PATH" TYPE="STRING" TYPE_FORMAT="512" IS_KEY="N" >DATA_PATH</COLUMN>
        <COLUMN NAME="LOG_FILE" TYPE="STRING" TYPE_FORMAT="512" IS_KEY="N" >LOG_FILE</COLUMN>
        <COLUMN NAME="IS_SHARDING_SERVER" TYPE="STRING" TYPE_FORMAT="64" IS_KEY="N" >IS_SHARDING_SERVER</COLUMN>
        <COLUMN NAME="REPLICATION_SET_NAME" TYPE="STRING" TYPE_FORMAT="64" IS_KEY="N" >REPLICATION_SET_NAME</COLUMN>
        <COLUMN NAME="IS_CONFIG_SERVER" TYPE="STRING" TYPE_FORMAT="64" IS_KEY="N" >IS_CONFIG_SERVER</COLUMN>
        <COLUMN NAME="LIST_OF_CONFIG_SERVERS" TYPE="STRING" TYPE_FORMAT="64" IS_KEY="N" >LIST_OF_CONFIG_SERVERS</COLUMN>
        <COLUMN NAME="MAX_CONNECTIONS" TYPE="NUMBER" IS_KEY="N" >MAX_CONNECTIONS</COLUMN>
        <COLUMN NAME="OPLOG_SIZE" TYPE="NUMBER" IS_KEY="N" >OPLOG_SIZE</COLUMN>
        <COLUMN NAME="INSTANCE_VERSION" TYPE="STRING" TYPE_FORMAT="64" IS_KEY="N" >INSTANCE_VERSION</COLUMN>
        <COLUMN NAME="OS_PROCESS" TYPE="STRING" TYPE_FORMAT="64" IS_KEY="N" >OS_PROCESS</COLUMN>
        <COLUMN NAME="OS_PROCESS_ID" TYPE="NUMBER" IS_KEY="N" >OS_PROCESS_ID</COLUMN>
      </TABLE>
    </METADATA>
  
  </METADATAS>

  After you add target to em, the errors appeared in emoms_pbs.log on the SGD server

  2012-11-09 16:08:13,114 [GCLoader[uploadonfetch] - https://ph-10-10-59-224.cp.no.sohu.com:3872/emd/main/] ERROR
   gcloader.CallbackInterface logp.251 - Failed to execute pre-load for: 
  Target Id       :CDE026FD2C446D2AE043E19D0B0AA2B6
  Collection Name :CheckServiceConf
  Agent Url       :https://ph-10-10-59-224.cp.no.sohu.com:3872/emd/main/
  version         :1.0
  metadata version:2.0
  oracle.sysman.eml.ecm.track.RepositoryOperationException: executePreLoad: Config metadata not found: 
  collectionName   : CheckServiceConf
  targetGuid       : CDE026FD2C446D2AE043E19D0B0AA2B6
          at oracle.sysman.eml.ecm.track.EcmConfigData.executePreLoad(EcmConfigData.java:344)
          at oracle.sysman.core.pbs.gcloader.CallbackInterface.executePreLoad(CallbackInterface.java:245)
          at oracle.sysman.core.pbs.gcloader.DataLoader.executePreLoad(DataLoader.java:1185)
          at oracle.sysman.core.pbs.gcloader.DataLoader.loadDataImpl(DataLoader.java:920)
          at oracle.sysman.core.pbs.gcloader.XMLDocumentDataParser.endElement(XMLDocumentDataParser.java:400)
          at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1359)
          at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:376)
          at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:322)
          at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
          at oracle.sysman.core.pbs.gcloader.XMLDocumentDataParser.split(XMLDocumentDataParser.java:148)
          at oracle.sysman.core.pbs.gcloader.DataLoader.loadDataCollection(DataLoader.java:439)
          at oracle.sysman.core.pbs.gcloader.RequestMapper.processDataCollection(RequestMapper.java:200)
          at oracle.sysman.core.pbs.gcloader.RequestMapper.processAll(RequestMapper.java:154)
          at oracle.sysman.core.pbs.gcloader.Receiver.processFile(Receiver.java:1487)
          at oracle.sysman.core.pbs.gcloader.Receiver.doPost(Receiver.java:1309)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
          at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
          at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
          at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
          at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
          at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
          at oracle.sysman.core.pbs.app.ContextInitFilter.doFilter(ContextInitFilter.java:113)
          at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
          at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
          at java.security.AccessController.doPrivileged(Native Method)
          at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
          at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
          at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
          at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
          at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
          at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
          at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
          at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
          at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
          at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
          at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.
  java:3715)
          at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java
  :3681)
          at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
          at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
          at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
          at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
          at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
          at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
          at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  I am really confused with the error message and have no idea how to fix this.
  Could someone give advice? Thank you in advance!
  
  Best wishes
  Satine

  Satine,
  The name of the collection item)

  Thank you...

  Pinaki-

• vifp addserver fails with the error cannot add the user

  This my first post on this forum that I couldn't find an answer via Google search. If I do not use correct terminology or fail to provide comprehensive information, please forgive me. I'm not an expert on VMWare, just a passionate curious tech. I found VMWare to be a very exciting and easy to use product. The VMWare knowledge base is excellent and so is the community of users.

  I have install VMWare ESXi 6.0 free House on servers Dell T420 and T110 II. I recently tested vMA 5 by installing it as a virtual machine on one of the servers. I watched the tutorial Youtube how to use vifp to add servers. I have network etc. on vMA installation and it works fine. Automatic update worked. I issue the command sudo vifp addserver 192.168.250.96, I am prompted for the password. When I enter the password, I get an error error: cannot add users. I checked the log file in /var/opt/vmware/vma/vifpd.log and the more descriptive message is:

  addServer: error occurred when adding users for 192.168.250.96... roll back. An error occurred during the creation of users on 192.168.250.96

  Then I noticed that since I'm on the console vMA to run these commands, as soon as the error occurs, I see that in the lower part, under recent tasks, I see an error: General system error: weak password. The details of the error says:

  

  Weak password: not quite different characters or classes.

  Now my password is strong enough. I can't post it here but I'll post a similar password:

  4518Gabdhjg #01

  It is 14 characters and has the numbers, letter uppercase, lowercase letters and special characters. I read the VMWare documentation on passwords and for me, the password seems very well. Any help will be appreciated.

  Thank you

  Arun Gupta

  My bad. I didn't know that vMA 6.0 is available. I just downloaded and configured vMA 6.0 and the problem is solved. Sorry for disturbing everyone.

• vCAC6 IaaS installation fails with configuration wizard - cannot run SQL Create User command

  Kia Ora.

  Put together the first poc vCAC6. The devices are in place and works fine, now up to IaaS Win2k8r2 with local SQL Express and this install fails. Pre-Reqs work. Installed and patched .NET 4.5 (not 4.5.1) as well.

  I installed as a local administrator on the server arrived at the field of IaaS. Installation running. EXE using run as administrator.

  The installation creates the database in SQL Express premises. I slowly raised privileges to solve the problems, but the same lines are written to the LOG file and there is an installation failed.

  News: 2014-01-15 09 49 58 588 h: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB Target.

  News: 2014-01-15 09 49 58 604 h: build succeeded.

  News: 2014-01-15 09 49 58 604 hours: 0 warning (s)

  News: 2014-01-15 09 49 58 604 h: error (s) 0

  News: 2014-01-15 09 49 58 620 hours: time 00:03:35.12

  News: 2014-01-15 09 49 58 667 hours: CREATE USER [serverName\Administrator] to [NVCACIAAS\Administrator] CONNECT

  News: 2014-01-15 09 49 58 682 hours: EXEC sp_addrolemember 'db_owner', 'serverName\Administrator. "

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\admin] FOR LOGIN [serverName\Administrator] command.

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\Administrator] FOR LOGIN [serverName\Administrator] command.

  Is not not a SQL guru, I tried to elevation of privileges and exchanged between using SQL and Microsoft connection. tried to hook up with a new SQL and AD security with rights to MSDB db_owner account. Also as a 'Microsoft authenticated. " each re - run provides the same statements without worrying if the localMachine\Administrator account exists or not.

  Any help much appreciated.

  Thank you and happy new 2014!

  Hi there.

  I added the administrator account of the local computer in the security of SQL Express to the sysadmin role and installation is complete. ?!? Although I tried to use the SA account to install and the same messages of error and success in this file as well newspapers runs.

  Now these lines look like this;

  News: 2014-01-15 10 21 50 978 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  News: 2014-01-15 10 21 50 994 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  If it is installed, but I don't know why I need to raise the local Sysadmin role administrator account so he could complete or why to create the user account wrong localMachine\Administrator in installation because there was.

  I've rolled back to a previous snapshot and was able to repeat the failure until I added this user account to the Sysadmin role.

  Her go configuration and usage vCAC now. I'll repeat the installation at a later stage.

  see you soon

• DAC 11.1.1.6.4 fails with the error cannot get columns: ORA-01403: no data found

  Hello

  We strive to run a full charge in DAC, but it is a failure.

  The S_ASSET table is empty and therefore, we get the error

  Could not get column: ORA-01403: no data found

  We were not facing this error in DAC 10 g but after upgrade to DCA 11 g, this task has no place if the array is empty. How remove this restriction and DAC will work perfectly even if the tables are empty to full charge?

  CAD DETAILS

  Console Administration Oracle BI DW

  CAD build a 11.1.1.6.4.20121119.2022 Build date: November 19, 2012

  Management Console to install, configure, and administer the Warehouse Analytics of Oracle Business

  Schema version - 47, Index version - 36, repository version - 6, data version Seed - 16

  INFORMATICA - VERSION9.0.1 HF2

  
  

  Here's the log of IMG_BUILD - S_ASSET when this task was running in DAC 10 g. The task facing any problem when S_ASSET table was empty.

  [code]

  2013-12-23 15:34:29.644 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET began.

  the number of days of prunes: 4

  After change data capture: 2013-12-19 12:23:19.332 in full Mode.

  2013-12-23 15:34:29.69 - execution:

  TRUNCATE TABLE S_ETL_I_IMG_6

  2013-12-23 15:34:29.89 - executed successfully.

  2013-12-23 15:34:29.9 - execution:

  TRUNCATE TABLE S_ETL_R_IMG_6

  2013-12-23 15:34:30.145 - executed successfully.

  2013-12-23 15:34:30.16 - execution:

  TRUNCATE TABLE S_ETL_D_IMG_6

  2013-12-23 15:34:30.198 - executed successfully.

  2013-12-23 15:34:30.236 - execution:

  INSERT / * + APPEND * / INTO S_ETL_R_IMG_6

  (ROW_ID, MODIFICATION_NUM, LAST_UPD)

  SELECT

  ROW_ID

  MODIFICATION_NUM

  LAST_UPD

  Of

  S_ASSET

  WHERE

  LAST_UPD > TO_DATE ('2013-12-19 12:23:19 ',' ' YYYY-MM-DD HH24:MI:SS)

  2013-12-23 15:34:30.968 - executed successfully.

  2013 12-23 15:34:30.989 - execution of deleting duplicates rowid.

  2013-12-23 15:34:31.01 - successfully deleting duplicates rowid.

  2013-12-23 15:34:31.27 - execution:

  DROP VIEW V_ASSET

  2013-12-23 15:34:31.566 - executed successfully.

  2013-12-23 15:34:31.569 - execution:

  CREATE VIEW V_ASSET AS

  SELECT

  *

  Of

  S_ASSET

  2013-12-23 15:34:31.743 - executed successfully.

  2013-12-23 15:34:31.78 - execution:

  SELECT COUNT (*) IN S_ASSET

  The County is: 0

  Executed successfully: CHANGE CAPTURE: IMG_BUILD - internal S_ASSET

  (Number of attempts: 1).

  Executed orders:

  IMG_BUILD - internal

  2013-12-23 15:34:31.851 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET has finished running with the completed state.

  The same task, IMG_BUILD - S_ASSET fails when it is running in DAC 11 g, because the table is empty. Here is the log for the failure of the task to 11g.

  [code]

  2013-12-27 21:21:47.497 acquisition of resources

  2013-12-27 21:22:20.33 acquired resources

  2013-12-27 21:22:20.787 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET began.

  the number of days of plum: 5760

  After change data capture: 2013-12-23 21:19:19.233 in full Mode.

  21:22:21.211 2013-12-27 - execution:

  TRUNCATE TABLE S_ETL_I_IMG_6

  2013-12-27 21:22:22.384 - executed successfully.

  21:22:22.389 2013-12-27 - execution:

  TRUNCATE TABLE S_ETL_R_IMG_6

  2013-12-27 21:22:22.532 - executed successfully.

  21:22:22.534 2013-12-27 - execution:

  TRUNCATE TABLE S_ETL_D_IMG_6

  2013-12-27 21:22:22.546 - executed successfully.

  21:22:22.55 2013-12-27 - execution:

  INSERT / * + APPEND * / INTO S_ETL_R_IMG_6

  (ROW_ID, MODIFICATION_NUM, LAST_UPD)

  SELECT

  ROW_ID

  MODIFICATION_NUM

  LAST_UPD

  Of

  S_ASSET

  WHERE

  LAST_UPD > TO_DATE ('2013-12-23 21:19:19 ',' ' YYYY-MM-DD HH24:MI:SS)

  2013-12-27 21:22:22.614 - executed successfully.

  2013 12-27 21:22:22.616 - execution of deleting duplicates rowid.

  2013-12-27 21:22:24.72 - successfully deleting duplicates rowid.

  Could not get column: ORA-01403: no data found

  FAULT INFO: Error executing: CHANGE CAPTURE: IMG_BUILD - internal S_ASSET

  MESSAGE: com. Siebel.Analytics.etl.Execution.exceptions.ChangeCaptureTaskFailedException: Change Capture failed.

  EXCEPTION CLASS: java.lang.RuntimeException

  com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:536)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)

  com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)

  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  java.util.concurrent.FutureTask.run(FutureTask.java:138)

  java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)

  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  java.util.concurrent.FutureTask.run(FutureTask.java:138)

  java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  java.lang.Thread.run(Thread.java:619)

  : CAUSE:

  MESSAGE: change Capture failed.

  EXCEPTION CLASS: com.siebel.analytics.etl.execution.exceptions.ChangeCaptureTaskFailedException

  com.siebel.analytics.etl.etltask.ChangeCaptureTask.executeChangeCapture(ChangeCaptureTask.java:93)

  com.siebel.analytics.etl.etltask.ChangeCaptureTask.doExecute(ChangeCaptureTask.java:46)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)

  com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)

  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  java.util.concurrent.FutureTask.run(FutureTask.java:138)

  java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)

  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  java.util.concurrent.FutureTask.run(FutureTask.java:138)

  java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  java.lang.Thread.run(Thread.java:619)

  (Number of attempts: 1).

  IMG_BUILD - internal

  2013-12-27 21:22:31.526 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET has finished running with the Failed state.

  [[code

  
  

  The CREATE VIEW privilege was missing from the CAD database user, therefore, was not to create the step. I have granted CREATE VIEW and all is well.

• The L7590 software installation fails with 'the system cannot find the file specified. " WIN/7

  I have an L7590 attached to my wireless router, ethernet cable that My HP Pavillion is also connected to the router via a cable. Solution Center has stopped working properly after that a power failure brought me to restart everything.  Everything works fine for all devices and software with the exception of the solution Center.

  I uninstalled solution Center, run the uninstall-L3 batch and reinstalled the printer.  I can print to the printer.  I can't Solution Center to install.

  I need ability to this printer as a scanner and the ability to fax from my computer.

  I scanned the forums and have not yet found a solution.  Any help is GREATLY appreciated!

  I solved my problem, at least for me.  I have 4 computers that are sharing the printer so I got it via a cable to connect to my router.  He is sitting close to my first computer Clubhouse so I changed the connection of a USB connection to this computer.  I have downloaded and run the L4 which takes everything on my desk, associated with the All in One printer Uninstall.  I then downloaded the latest version of the software for printer myL7590 and stotred to a directory on my hard drive.  Then, I went in this directory and run the Setup program.  This time everything worked perfectly.  Of course I'm sharing now the printer in my office.

• Virtual PC installation fails with "Windows Update cannot be installed because of the error 2149842967"

  I have two laptops Lenovo X 201.  An installed Virtual PC/Win XP fine mode, the other gives the following when installing Virtual PC update. ;     (I made the hardware, virtualization and the Windows XP mode prereqs)

  (1) throws a dialog box titled saying "stand-alone installation of Windows Update": "update is not applicable to your computer."

  (2) in the event viewer, you see this message:

  Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\Windows\system32\wusa.exe" "D:\Downloads\Windows6.1-KB958559-x64-RefreshPkg.msu" ")

  (3) check in the registry for the following paths is identical between the two computers and recommended values

  HKEY_USERS\. DEFAULT\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  (4) emptied the folder "C:\Users\user\AppData\Local\Temp".

  (5) I do not receive the following symptoms

  (a) the low 'Register of space' error, sets the size of "unlimited" registry: so no need to change the registry setting

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
  Key: RegistrySizeLimit

  Other thoughts?   What does error code 2149842967 mean?

  Thank you

  Hello

  Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated. Feel free to post your request here on the Forums of Windows, we would be happy to help you.

  Thank you.

• From JDeveloper fails with an error "cannot find a J2SE SDK installed to the path... »

  I just downloaded 11.1.1.7 Setup for JDev. After installation, I try to configure the JAVA_HOME path.

  However, when I start JDev I wonder "Please specify the path to the JDK Java House... »

  If I (C:\Program Files (x86)\Java\jre7\bin\java.exe - Java 7, version 51) I get an error message "could not find a J2SE SDK installed in the path c:\Program Files (x 86) \Java\jre7." and JDev ends.)

  What can I do to fix this? Thank you.

  The specified path seems to be a path of a Java JRE but not a path to a Java SDK. JDeveloper needs a complete Java SDK (e.g. JDK) but not only a JRE.

  Dimitar

• : Cannot communicate with the Cluster ready Services

  Hi all
  We have a two-node cluster for our QA environment. Version database 11.2.0.2. UNIX people upgraded the kernel version and we relinked binaries. After the restoration of the links, the CRSD is not coming, and therefore the RAC database is DOWN.
  
  Here are some checks:
  

  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>./crsctl start cluster
  CRS-2672: Attempting to start 'ora.crsd' on 'argalephdbqa1'
  CRS-2676: Start of 'ora.crsd' on 'argalephdbqa1' succeeded
  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>./crsctl start has
  CRS-4640: Oracle High Availability Services is already active
  CRS-4000: Command Start failed, or completed with errors.
  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>id
  uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel)
  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>./crsctl status resource -t
  CRS-4535: Cannot communicate with Cluster Ready Services
  CRS-4000: Command Status failed, or completed with errors.
  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>./crsctl start crs
  CRS-4640: Oracle High Availability Services is already active
  CRS-4000: Command Start failed, or completed with errors.
  
  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>sqlplus '/as sysasm'
  
  SQL*Plus: Release 11.2.0.2.0 Production on Thu Dec 13 22:30:08 2012
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
  With the Real Application Clusters and Automatic Storage Management options
  
  SQL> select name, state from v$asm_diskgroup;
  
  NAME                           STATE
  ------------------------------ -----------
  DATA1                          MOUNTED
  FLASH                          MOUNTED
  QUORUM                         MOUNTED
  
  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>./crsctl stat res -t -init
  --------------------------------------------------------------------------------
  NAME           TARGET  STATE        SERVER                   STATE_DETAILS
  --------------------------------------------------------------------------------
  Cluster Resources
  --------------------------------------------------------------------------------
  ora.asm
        1        ONLINE  ONLINE       argalephdbqa1            Started
  ora.cluster_interconnect.haip
        1        ONLINE  ONLINE       argalephdbqa1
  ora.crf
        1        ONLINE  ONLINE       argalephdbqa1
  ora.crsd
        1        ONLINE  OFFLINE
  ora.cssd
        1        ONLINE  ONLINE       argalephdbqa1
  ora.cssdmonitor
        1        ONLINE  ONLINE       argalephdbqa1
  ora.ctssd
        1        ONLINE  ONLINE       argalephdbqa1            OBSERVER
  ora.diskmon
        1        ONLINE  ONLINE       argalephdbqa1
  ora.drivers.acfs
        1        ONLINE  ONLINE       argalephdbqa1
  ora.evmd
        1        ONLINE  INTERMEDIATE argalephdbqa1
  ora.gipcd
        1        ONLINE  ONLINE       argalephdbqa1
  ora.gpnpd
        1        ONLINE  ONLINE       argalephdbqa1
  ora.mdnsd
        1        ONLINE  ONLINE       argalephdbqa1
  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>crsctl stat res -t
  CRS-4535: Cannot communicate with Cluster Ready Services
  CRS-4000: Command Status failed, or completed with errors.
  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>crsctl query css votedisk
  ##  STATE    File Universal Id                File Name Disk group
  --  -----    -----------------                --------- ---------
   1. ONLINE   8faab9ebb1514f7fbf2360c9cbd32b77 (ORCL:QUORUM_DISK1_1) [QUORUM]
   2. ONLINE   18ce8b4afc2f4f8fbf908de3848d893e (ORCL:QUORUM_DISK1_2) [QUORUM]
   3. ONLINE   89822108feb64f06bfa324d5d8ea4928 (ORCL:QUORUM_DISK2_1) [QUORUM]
  Located 3 voting disk(s).
  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>ocrcheck
  PROT-602: Failed to retrieve data from the cluster registry
  PROC-26: Error while accessing the physical storage
  ORA-27300: OS system dependent operation:open failed with status: 13
  ORA-27301: OS failure message: Permission denied
  ORA-27302: failure occurred at: sskgmsmr_7

  The entrances to some of the papers are:
  
  /U01/app/oragrid/11.2.0.2/log/argalephdbqa1/alertargalephdbqa1.log:
  

  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/log/argalephdbqa1>tail -10 alertargalephdbqa1.log
  2012-12-13 22:24:54.733
  [ohasd(10136)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
  2012-12-13 22:54:02.426
  [client(24168)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/oragrid/11.2.0.2/log/argalephdbqa1/client/ocrcheck_24168.log.
  2012-12-13 22:57:23.301
  [client(24312)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/oragrid/11.2.0.2/log/argalephdbqa1/client/crsctl_oracle.log.
  2012-12-13 22:57:30.575
  [client(24341)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/oragrid/11.2.0.2/log/argalephdbqa1/client/crsctl_oracle.log.
  2012-12-13 22:57:40.981
  [client(24531)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/oragrid/11.2.0.2/log/argalephdbqa1/client/crsctl_oracle.log.

  /U01/app/oragrid/11.2.0.2/log/argalephdbqa1/CSSD/ocssd.log:
  

  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/log/argalephdbqa1/cssd>tail -10 ocssd.log
  2012-12-13 23:09:01.671: [    CSSD][1116453184]clssnmSendingThread: sending status msg to all nodes
  2012-12-13 23:09:01.671: [    CSSD][1116453184]clssnmSendingThread: sent 4 status msgs to all nodes
  2012-12-13 23:09:05.679: [    CSSD][1116453184]clssnmSendingThread: sending status msg to all nodes
  2012-12-13 23:09:05.679: [    CSSD][1116453184]clssnmSendingThread: sent 4 status msgs to all nodes
  2012-12-13 23:09:09.687: [    CSSD][1116453184]clssnmSendingThread: sending status msg to all nodes
  2012-12-13 23:09:09.687: [    CSSD][1116453184]clssnmSendingThread: sent 4 status msgs to all nodes
  2012-12-13 23:09:14.697: [    CSSD][1116453184]clssnmSendingThread: sending status msg to all nodes
  2012-12-13 23:09:14.697: [    CSSD][1116453184]clssnmSendingThread: sent 5 status msgs to all nodes
  2012-12-13 23:09:19.707: [    CSSD][1116453184]clssnmSendingThread: sending status msg to all nodes
  2012-12-13 23:09:19.707: [    CSSD][1116453184]clssnmSendingThread: sent 5 status msgs to all nodes

  /U01/app/oragrid/11.2.0.2/log/argalephdbqa1/crsd/crsd.log:
  

  +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/log/argalephdbqa1/crsd>tail -15 crsd.log
  
  2012-12-13 22:24:48.899: [  OCRRAW][3322856016]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
  2012-12-13 22:24:48.901: [  OCRRAW][3322856016]proprioo: Failed to auto repair the OCR configuration.
  2012-12-13 22:24:48.901: [  OCRRAW][3322856016]proprinit: Could not open raw device
  2012-12-13 22:24:48.901: [  OCRASM][3322856016]proprasmcl: asmhandle is NULL
  2012-12-13 22:24:48.903: [  OCRAPI][3322856016]a_init:16!: Backend init unsuccessful : [26]
  2012-12-13 22:24:48.903: [  CRSOCR][3322856016] OCR context init failure.  Error: PROC-26: Error while accessing the physical storage
  ORA-01031: insufficient privileges
  
  2012-12-13 22:24:48.904: [ CRSMAIN][3322856016] Created alert : (:CRSD00111:) :  Could not init OCR, error: PROC-26: Error while accessing the physical storage
  ORA-01031: insufficient privileges
  
  2012-12-13 22:24:48.904: [    CRSD][3322856016][PANIC] CRSD exiting: Could not init OCR, code: 26
  2012-12-13 22:24:48.904: [    CRSD][3322856016] Done.

  Any suggestion on how to continue?

  Martin.morono wrote:

  Any suggestion on how to continue?

  Filing of an SR (service request) with the support of the Oracle would be the prudent thing to do.

• Difference between crsctl start crs and crsctl start cluster

  Hello
  What is the difference between 'crsctl start crs' and new setting on 11.2 "crsctl start cluster" both have the same result?
  
  Bytes

  Hello

  'crsctl start crs' and new setting on 11.2 "crsctl start cluster" both have the same result?

  We can say not having the same result.

  crsctl power crs - manage start/stop the entire stack of Oracle Clusterware on one node, including the OHASD process, this command should be used only on the local node.

  crsctl power cluster - managing start/stop battery Oracle Clusterware on the local node if you do not specify either - all or n and the remote nodes if option-n or - all be specified, NOT including the OHASD process. You cannot start and stop clusterware stack without running OHASD process.

  Despite crsctl power crs manage all Oracle Clusterware stack on the local node crsctl power crs not allow you to manage the remote nodes, unlike crsctl power cluster which allows to manage all nodes, but if the process of KARINE is runing.

  To manage Oracle Clusterware battery on remote nodes, the ohasd (Oracle high availability Services Daemon) should run on all managed nodes. (ie using crsctl start cluster - n , )

  So, if you try use crsctl start cluster node1 - n, node2 and node1 your local node and node1 or node2 OHASD don't not running this command will be fails.

  Kind regards
  Levi Pereira