Hello everyone [problem installation and activation of Lightroom 6]

Similar Questions

• During the installation and activation of google chrome, I lost my taskbar

  Original title: Google Chrome

  during the installation and activation of google chrome, I lost my taskbar. How can I reinstall my taskbar?

  Hi Frank,.

  1. do you receive any error messages?

  2. have you restarted the computer once installed google chrome?

  3. not this problem occurs when you run a specific program or out of order?

  This problem can occur for the following reasons:

  • Auto-hide the taskbar has been selected for the taskbar and Start Menu Properties.
  • Your user account settings are corrupt.

  Method 1: Make sure that the hide option automatically is not selected for the taskbar

  To determine if the hide option automatically is not enabled for the taskbar and Start Menu properties, follow these steps:

  a. press CTRL + ESC.

  b. If the Start menu is displayed, click on the Start menu and then click Properties.

  c. click on the task bar , clear the Auto-hide the taskbar option and then click OK.

  If the problem persists, you can proceed to method 2.

  2 method: Recycle Explorer.exe

  Try to recycle Explorer.exe by opening the Task Manager (you can use Ctrl + Shift + Esc), selecting explorer.exe in the list and choosing end process.

  Now go to the file menu, choose new task and type in Explorer in the Open box. Press on enter and explore should restart itself.

  Check whether the taskbar is visible now.

  Hope this information helps. Provide more information so that we can help you.

• Again - the EULA allows to keep Windows XP after the installation and activation of a retail upgrade to Windows 7

  The EULA allows to keep Windows XP after installation and activation of a retail upgrade to Windows 7?
  I understand that the EULA (EULA) prohibits the USE of the operating system upgraded - must also be removed from the system?

  I intend to upgrade a pre-installed Windows Media Center 2006 on a Gateway computer to a level of detail to Windows 7 Pro 64 - bit.  I am adding a new hard drive, as this case nears end of life... and plan to install the operating system upgraded to the new HD - because I have XP 32 bit to Win7-64 bit... and a "custom" installation is necessary, anyway.

  This will result in an operating system XP on the old hard drive and the new OS Win7 Pro 64 - bit on the new drive.  There have been suggestions that the answer to this question is simply to remove the "old" operating system, after activating the 'new' Windows 7.  However - I see that any installation (or REINSTALLATION) of the operating system upgraded to Win 7 requires the previous XP to be "present on the computer.

  QUESTION: as long as I don't 'USE' the BONE replaced/implemented to date, I am in compliance with the EULA?  Alternatively, do I install "over" this Windows Media Player OS - on the old, due to lack of hard drive?

  The Media Center EULA States: «...» "15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of. ... ', but is silent (as far as I can find by reading the EULA on the question of if software upgrade HAVE to be 'destroyed'.)

  (See: http://download.microsoft.com/Documents/UseTerms/Windows%207_Professional_English_7bb89e9f-20ea-4555-892f-394539ec1090.pdf "")

  Thanks for your review (a reference to the appropriate Microsoft documentation would be nice too)
  John

  You said above, «...» "You will be able to upgrade to Windows XP, it is a qualification license... »

  And I assume you are talking about my software Windows XP Media Center Edition (currently installed), as being a "qualification licence".

  That is right.

  Are we in agreement that a copy preinstalled OEM of Windows XP Media Center Edition IS extendable with a 'detail' update the license for Windows 7?

  His qualification, but you can't make a real room upgrade, you can do a custom installation. See the previous post on how to migrate from Windows XP to Windows 7. An upgrade maintains the personal files, settings and installed applications.

  I understand the ban on using the OEM OS software OR the upgrade replacement software on one computer other than the one on which it was originally installed by the OEM.

  I also understand that I cannot use the "improved" XP Media Center software, once the upgrade of Windows 7 has occurred.

  The rest to determine if it NEEDS to be deleted or replaced... you have no guidance on this issue?

  Well, when you perform a custom installation, in essence, it is deleted or replaced. Then, it is part of the upgrade license. It's like it becomes a mind is more tangible, but always there as a base to which the upgrade license may exist on your system.
  ------------------------------------------------------------------------------------------------
  On the original thread, Stuart W J replied 10 September 2012-
  "....

  "New - the EULA allows you keep Windows XP after the installation and activation of a retail upgrade to Windows 7?

  "..... No it does not preserve / using XP after the upgrade... »
  -----------------------------------------------------------------------------------------------
  Although I can't find the ban against the "continued" it any where in the EULA.

  Thanks again,
  John

• Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window appears A Pro XI upstairs and Pro XI is insta

  Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window A Pro XI upstairs and Pro XI is installed. And is NOT in the drop-down list to select a Pro XI product.  What is going on?

  The product 'calling' is your old Acrobat - 9 or X. You need the serial number of this old version.

• I have real problems, installation and update of adobe programs on my mac (OSX 10.8.4)

  Here are the problems.

  Have the new Imac 27 "with 3 TB of fusion drive.

  Have CS6 LR etc, but having real problems, installation and update of program ADOBE EVERYTHING including Flash. CS6 it got to the point where I went through the Adobe representative on the online chat and we ended up having to put in place a new log-in which allowed in part but CS6 last updated has not been updated. I took my apple Mac which did a software and check HD and all is well!

  Now I signed CC Adobe for photoshop and I can't install Photoshop CC and get the following error message. This isn't what I expect from the combination of Apple and Adobe! Can pls someone advise.

  ERROR: DS001: impossible to mount the disk image Volumes/Adobe Photoshop CC/Adobe Photoshop CC/payloads/AdobePDFSettings10-mul/AdobePDFSettings10-mul.dmg. Please check that the disk image is not altered.

  Hi NinoRMann,

  The download seems to be incomplete, and that's why your Mac can not mount the image. Please try to download it again.

  Kind regards

  Abhijit

• FSX doe to not work after installation and activation on xp 64

  • problems with fsx deluxe
  • Windows xp prof 64 bit
  • tried to reinstall software
  • When you click on the shortcut on the office splash screen appears the landscape of loads of objects then disappears
  • did have problems in first installation with activation key after 2nd install called from new activation, installed and active fsx ok code but does not start a short cut
  • should I try a disc format hard costs re - install of xp64 and fsx installation costs

  Hello

  Have you installed any 3^rd party application (aircraft) and/or you are running one of the game Add-ons.

  You can also check if DirectX update allows you to play the game.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en

  Also make sure that all drivers are updated to your computer.

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems installation and update, get the error 641

  I have installation and update problems to continue to receive code 641 please help

  Hi ByrdyRidgley,

  Follow the troubleshooting steps in this thread with the same error code 641.

  Let us know if that helps.

• indicator problem ListView and activity

  Hi, I was playing around with the sample application address book so that I have included a button to re-populate the list view. It takes a few seconds, that's why I've included an indicator of activity runs while the list view is being filled.

  The activity indicator is supposed to start when the button is pressed and stop when the display of the list has been entered.

  Now, my problem is that the activity indicator seems to start when the display of the list has been populated (it just starts and stops in a Flash). I have also included a header which changes the onbuttonclicked text to check if that was the problem-indicator of activity but same thing happening (text only changes after listview is filled). The list view appears to stop all operations until it was settled.

  What is the cause and how can I solve this problem? Thank you.

  onButtonClicked {}
  change the header text
  start the activity indicator
  fill listview
  }

  Then in c ++ after m_model-> insert (map) I emit a stop to the activity indicator signal.

  Indicator text and header activity does not change until the listview has been briefed.

  as the list of all the opinions of the population occurs on the event thread indicator gets no time to do things.
  If you would like to fill in the asynchronous list, it should work as expected.

  as a sidenote: have a look to refresh the headers, they are often used to reload a list.

• Problem installation and launch

  I recently downloaded and installed the creative cloud for my pc and it was working fine. However, after a day or two, when I try to open the creative application of cloud on my desk, he wasn't going to start. There is no error messages, firewall or network connectivity problems. It would not just run. on a troubleshooting page, he suggested to uninstall the application and reinstall. so I tried it and now it won't download and install at all. Sometimes the message indicating that "creative cloud is damaged or not installed" appears. None of the troubleshooting topics have helped so far.

  You must perform a clean installation by deleting some files that have been created according to the directives of previous installation and contradictory new installation process.

  Temporarily disable the firewall.

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove? Rename it to Adobe Creative Cloud centenarians.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  Step 4:

  ' ' Make sure that Adobe Creative Cloud is not listed in Control Panel > program and features list of . ""

  Click on the link below and download Adobe Application manager and install the same:

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager10.0_all.exe

  Once the installation is complete, look for the icon of Adobe Application Manager launch on desktop and double-click it.

  It will start the update process.

  Once finished, he shud launch creative Cloud app.

• Problem with the installation and activation of Autodesk Autocad 2011

  I'm having a problem with the Autodesk Autocad 2011 activation. After I download and install the software, there should I active and a window opens to activation. The problem is the window is empty and I tried closing and reopending the program. I tried to uninstall and reinstall the program several times and get the same result. I checked the site Autodesk solutions and tried what they suggested, but without success. Help, please.

  Thank you

  Matt

  Hello

  You can activate AutoCAD, through activation and the recording interface, you can activate your product 24 hours a day, seven days a week, through the Internet or by e-mail. Or the other option takes only a few steps to complete and requires your product serial number and registration information.

  http://images.Autodesk.com/ADSK/files/autocad_2011_faq_us.PDF

  Also try the suggestion in the given below link and check if this is useful to solve the problem.

  http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10244471&LinkId=9240617

  http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10243884&LinkId=9240617

  If this does not help, you must contact the support of AutoCAD to help you activate the product.

  http://USA.Autodesk.com/ADSK/servlet/PS/index?siteid=123112&ID=2714854&LinkId=9240617

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

  Hello HP assistants.

  I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

  Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

  As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

  Thanks in advance.

  Hello

  As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Question related to installation and activation of Windows 7 on laptop

  Hello

  I have a laptop DELL E6420 with Windows 7 sticker on it, she a business laptop.

  My Department business IT install Genuine Windows 7 on this version for professional use.

  After the period of time, the laptop is rented for me.

  Can I install a genuine version of Windows on it according to the sticker on it (I understand that this sticker means that an authentic version is sold with the laptop).

  If so, how can I get the Activation Code

  Concerning

  The sticker is likely related to the installation of Windows 7 that was using your company.

  You need a new installation code, none of your business.

• Problems installation and subsequently error codes...

  So this morning on my computer that I was going to Watch youtube videos, and it pops up saying that my adobe flash player has been exceeded.

  Fine and everything, I went to put up-to-date, and when I launched the .exe download is finished and the program installation of Adobe Flash Player, popped up and his was empty, did nothing.

  I did some research autour and found that a way around this downloads Setup offline, including one member of this jury to posted links very often. But every time I tried by following these links he gave me a 404 error, so I did some research autour, ended up a Download Center Adobe Flash Player - downloads and downloaded this one: download the debugger contained Windows Flash Player Plugin from 15 (for Netscape compatible browsers) (EXE, 16.84 MB)

  It installed just fine, my videos and new .swf files.

  But now I encountered another problem, when I load a youtube video, I get some error codes, they are here

  Error #2044: Unmanaged by the IOErrorEvent:. Text = Error #2036: finished loading never.

  Now I have google these errors and looked at the help section on this website, and these two have nothing to do with the question that I have, they apparently pop for no reason, when I hit all reject or continue the video plays very well. But I really do not have to deal with this popping up every time I'm going to watch a video.

  I don't know if it has something to do with the plugins that I use or the browser, I'll do some tests in the meantime but I will list what Im running below:

  Windows 7 Ultimate 64 bit

  Using the Opera Web browser

  The only extension that I think might be causing a problem, is Center of Youtube, but the only thing that really changes is the way in which the video load, I'll try to disable it and see if that changes it, but I am confident is not the issue here.

  If someone could help me with this I would really appreciate it.

  useduser wrote:

  Error #2044: Unmanaged by the IOErrorEvent:. Text = Error #2036: finished loading never.

  You get what you have installed the debug player.  Uninstall and install the standard of players

  • Flash Player ActiveX (Internet Explorer)
  • Flash Player plug-in (all other browsers)

• Silent installation and activation of the 50 copies of PhotoShop elements 12 TLP x

  I'm deploying licensed TLP of 50 users of PSE12 to 50 PCs without having to visit each PC, as was possible with previous versions.

  I have the installation in silent mode completed without error, but the product is not activated and has needed me to connect with one on each PC Adobe ID. Even once by the PC, it is not acceptable for a network installation.

  I also note that end users can disconnect from the Adobe ID so deactivatingthe software for all users of the computer, until I have revisit and sign in again. And no, we are not going to give users all Adobe ID credentials. Even before the events of the past week

  PSE12 Setup logs shows "there is no alternative files. Replace the value of substitution dir to be an empty string"- this is not find application.xml.override, even if the file is certainly available in the right places and is in UTF-8 format.

  (In addition, therefore, updates are not deleted.)

  My hunch is that the mechanism of application.xml.override was removed from PSE12 because of the new Adobe ID sign-in requirement?

  I am aware that AMEE is not request for the deployment of PSE.

  I would appreciate help on this.

  Concerning

  William

  Hi HMwkr,

  Please try the steps mentioned to serialize the items below:

  1 generate usng prov.xml the command:

  adobe_prtk.exe - tool = VolumeSerialize - generate - series => - leid = V7 {PhotoshopElements-EMT12-Win-GM - regsuppress = ss

  2 serialize using the command:

  adobe_prtk - tool = VolumeSerialize - provfile = 'absolute path to prov.xml.

  Please let us know if it worked.

  Kind regards

  Romit Sinha

• Question about own WXP installation and activation key code

  Hello

  I recently received this laptop computer 2nd hand and I want to do a clean install on it, but I had not given a disc o/s.
  Can I use the disk to my other pc, and use the code located on the back of it to install? or do I have to buy a new copy of xp?

  I hope someone can help.

  Cordially ak

  Hello

  As far as I know, that you can not use the key on the sticker code. This key code belongs to the original restore for this model of laptop CD. You must install OS with clean code. After doing this, you can download and install all necessary drivers, tools and utilities. Each of them you can find on Toshiba download page under http://eu.computers.toshiba-europe.com

  Good bye