Hello! How to change the page templates in Business Catalyst?

Similar Questions

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• How to set the page template for a page in app

  I've been looking for a way to re - assign a specific page to a different page template, and I must be blind. I did it with the regions and reports, but never a whole page. The closest I can find is how to set the default page for an application model template. What I have is a printable form that they want in a specific format. I was able to code the whole thing into a region of PL/SQL, but I was hoping that I could take an existing page template and modify the model to different regions in the areas I would like to.
  
  Can someone help me find this? I have already created a copy of the page template I want to twist.

  If you are in the tree view, double-click the entry of title of page (top); If you are in the component view, simply click the edit button in the page area. Either way will take you to the screen of the Page change. in the display attributes section, you will see a Page Model drop-down list.

  -David

• How to change the default template in the page with the Captcha verification failure message?

  Hello

  I created a blog in British Colombia that has image Captcha verification in the form of submission of comments.

  Each comment is submitted with incorrect captcha text, a system of notification error page like this--

  

  The problem here is the default template that is associated with this message is not the only one to be used. Instead, I would like to associate this with my own different model. I already did it for the 'Page of Confirmation page comments "which is translates correctly for comment presentations successful system. However, I am unable to locate the page system (for changes to the model) for the above error message. All tips/pointers?

  Thank you!

  It's the emergency system page, on which you have no control. The thing is, you really shouldn't see as a user. You see that you are missing the component javascript form that alerts the user when the captcha is not correct.

• limit the width by changing the page template

  Hi all

  I'm trying to get my site looks like http://www.plsqlchallenge.com

  so I tried to limit the width of the content page by changing the default page template as follows:

  go to the components shared = > models

  Theme: 7 Blue modern

  Type: page

  Choose the default template: No. Tabs - right Sidebar (optional / based on a table)

  just before #FORM_OPEN # I added this:

  < div id = "DΘmarrer" style = "width: 970;" height: 100%; box-shadow: 0 0 20px #333333; border-radius: 10px 10px 10px 10px; background-color: #00FFFF; ">

  and just after I added #FORM_CLOSE #.

  < / div >

  I also played a little with the other divs (changed colours)

  I can't seem to get the right result

  Help, please

  KR

  Martin

  Martijnke wrote:

  Hi all

  I'm trying to get my site looks like http://www.plsqlchallenge.com

  so I tried to limit the width of the content page by changing the default page template as follows:

  go to the components shared-online models

  Theme: 7 Blue modern

  Type: page

  Choose the default template: No. Tabs - right Sidebar (optional / based on a table)

  just before #FORM_OPEN # I added this:

  and just after I added #FORM_CLOSE #.

  In CSS units must always be specified for dimensions (except if the value of the dimension is 0). This means that width: 970 is not a property is valid and it is ignored by the browser. You must use width: 970px; to the rule.

• How to configure the Page template to read brought beans

  Hello
  
  I really don't understand why my Page template cannot read the data of an extended session bean.
  

  <af:pageTemplateDef var="attrs">
      <af:xmlContent>
      <af:panelStretchLayout>
        <f:facet name="center">
          <af:panelHeader> 
            <af:panelStretchLayout >
              <f:facet name="top">
                <af:panelGroupLayout>
                  <af:outputText value="#{sessionScope.myBean.title}" id="pt_ot1"/>
                </af:panelGroupLayout>
              </f:facet>
              <f:facet name="center">
                <af:facetRef facetName="content"/>
              </f:facet>
              
            </af:panelStretchLayout>
          </af:panelHeader>
        </f:facet>
      </af:panelStretchLayout>
    </af:pageTemplateDef>

  I specified my grain of session scope

  <?xml version="1.0" encoding="windows-1252" ?>
  <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <managed-bean id="__6">
      <managed-bean-name id="__5">myBean</managed-bean-name>
      <managed-bean-class id="__8">MyBean</managed-bean-class>
      <managed-bean-scope id="__7">session</managed-bean-scope>
    </managed-bean>
  </adfc-config>

  .. .and my bean simply defines a simple fact...
  

  public class MyBean{
       public String getTitle(){
            return "This is the title";
       }
  }

  Now when I create a page that extends this model, I can't see the title in my page?
  
  I missed something? Or its not possible really to call beans spread in a page template?
  
  Help, please... Thank you

  Hello

  the source of the problem is a rookie mistake typical

  What does this do? In fact the component output text tries to find the extent of session for the myBean object and then call getTitle. However, JSf only creates an instance of a bean (and then stores it in the memory defined scope) if the call is
  

  So this application, session and application scope does not have a scope in the EL prefix if it is a managed bean. Controlled beans are instantiated automatically by the JSF framework if the managed bean is addressed like this

  "#{bean.attribute}".

  Exception for this in the ADF are pageFlowScope, viewScope, and backingBeanScope, which are prefixed in the instruction of EL. Why in this case a prefix works it is because these are managed by the ADF and ADF controller is configured to monitor the pageFlowScope prefixes, viewScope, and backingBeanScope

  Frank

• How to change the pages look one at 100% to 90%

  All my pages can load on 90% - my husband added a printer wireless to my laptop and now the pages are loading in 100% - I want to return to the 90% load - HOW?

  If you are referring to IE, try this:

  In your status bar, bottom-right, Point on the Zoom, click the menu drop down > click Custom > set it to 90% >, click OK.

  HTH

• How to change the page that appears when I open the page new tab using the sign + on the tab bar?

  every time I open a new tab using + sign on the tabs bar, a Web site appears, which I was not aware. I want just the old rear setting. It must be my fault of friends. Help, please.

  You can do this on the topic: config page by resetting the pref browser.newtab.url via the context menu.

  See this article on the page tab (topic: newtab):

  • https://support.Mozilla.org/KB/new-tab-page-show-hide-and-customize-top-sites

• How to transfer the Site Muse on Business Catalyst to the new account of Catalyst Business

  I have a client who needs to move their site from a former supplier that uses Business Catalyst and Muse for their Web site and CMS.  The previous service provider is not very useful, that's why we want to give detailed instructions to move the site to a new account Business Catalyst and then manage the DNS once the site is transferred.  Any idea or the input is greatly appreciated.

  Online Support request to move the site to your new account. Support will probably escalate it and need to audit, the two parties want to do this etc... Ultimately, the site will appear in its new portal partner and they can manage the site as another.

• How to change the page number

  

  by using this object.

  Thank you.

  I got the answer.

  app.activeDocument.documentPreferences.startPageNumber = 15;

  Thank you interesting.

• How to identify the locale in the development of the Page template

  Hello.
  
  While building the page template, I need a way to identify in what I m local work. Some files is on the Complutense University of MADRID (in a segregation of the structure of language).
  
  For example: the English file will be in an address and the same (but in Portuguese) in another (address) - one and its referenced by the Page template. So, I need a flag on which local (idiom) is the current - use the right file for the right idiom.
  
  There is an implicit variable Webcenter give us with the current language?
  
  Way to do that?
  
  Thank you.

  You must use the Expression langauge

  #{view.locale}

  Outside of your condition, you can mix jstl and use it more productively.

  as

  
  content of the Complutense University of Madrid
  

  content of the Complutense University of Madrid
  

  Hope this helps you.

  Kind regards
  Hoque

• How to change overall several templates chapter in a book?

  I'm working on a new edition of an existing building; the new edition will be a new trim size.  I have the 40 chapters or more, and I want to change the master page to all the chapters and the positions of the part of the book.  For about five years I did anything on the FM band, so I'm having a hard time finding how to change the page and run the size of all the chapters of the book.  Is it possible to do in the world?  Alternatively, for to a chapter and copy and paste the templates to all the other chapters?

  Thank you!

  John

  www.controlgeek.NET

  See the recent thread (on the same question for the Variables).

  Mounting of several chapters at a time.

  Even technical, just specify only the Page layouts.

  And you'll probably want to chapter1.fm the control instance, rather than cover.fm
  

• How to change the SGA and PGA in 10g r2 RAC

  Hello
  
  How to change the SGA and PGA in 10g r2 RAC, its Linux.

  Hello

  Here's the way I followed to change the SGA and PGA in CARS.
  --------------------------------------------------------------------------------
  Action plan to change the parameter memory in the environment(5/21/2010) of production

  Note:
  =====
  Practice must be done in the DEV/TST environment before going to Production.
  Although the procedure can be applied in the testing environment the evolution of values
  used in the test environment should be amended since number of RAM are not the
  even between the production and test servers.

  1 changes to these two parameters in one of
  the prod instance, e.g. PROD1
  ====================================================
  Connect as sysdba on sqlplus
  --------------------------

  Change:

  ALTER system set sga_target = 28G scope = spfile sid ='* ';

  Change:

  ALTER system set pga_aggregate_target = 4G scope = spfile sid ='* ';

  SQL > alter system set pga_aggregate_target = 4G scope = both;
  SQL > show parameter pga_aggregate_target;
  -should see the number altered on both instances

  Change:

  SQL > alter system set sga_max_size = 28G scope = spfile sid ='* ';

  SQL > alter system set sga_max_size = 28G scope = spfile;

  SQL > alter system set sga_target = 28G scope = spfile;

  3 stop PROD database (two instances must stop)

  $> srvctl stop database d PROD
  $>. / $ ORA_CRS_HOME/bin/crs_stat - to check the status of the database

  4. establish the PROD database (two Forum should be high)

  $> srvctl START database-d PROD
  $>. / $ ORA_CRS_HOME/bin/crs_stat - to check the status of the database

  connection in both cases as sysdba to check
  --------------------------------------------

  SQL > show parameter pga_aggregate_target
            
  SQL > show parameter sga_max_size
  -should see the number of change always there in both cases
  -According to step 1

  -After confirmation above two parameters are changed on both instances.
  -then make the syntax below in a case

  (5) check that everything is ok

• How to change the background color dynamically on the page of the ofa

  How to change the background color dynamically on the page of the ofa

  Hello

  Can you please let me know the dynamic conditions to change the background color?

  Thank you

  Vincent

• How to change the size of the page Adobe Acrobat XI Pro and Adobe PDF printer?

  We have a problem with incorrect page size in Adobe Acrobat Pro XI. It is installed in our Citrix environment on the terminal Server in Windows 2008 R2 servers.

  By default, the page size is set to 'letter' in Adobe Acrobat format and the Adobe PDF printer and we need to change it to "A4".

  

  Where are these registered setting and how can I change it? Is there a registry key or something else?

  I discovered, that it is possible to edit the template files ".joboptions" under "C:\ProgramData\Adobe\Adobe PDF\Settings" to change the page size for the Adobe Acrobat. What is the only way to do it?

  

  But how can I change the settings in the Adobe PDF printer?

  

  And what do we hurt that the page size is set to "letter"?

  OK, I found a solution.

  I exported the correct Adobe PDF Printer settings with rundll32.exe, PrintUIEntry... and imported on all servers with PsExec.

  ".Joboptions" files, I changed to the good size of the Page and then copied on all servers.