Hello please help me

Similar Questions

• Hello, please help me. I use a power keyboard for my laptop. I see in the new keyboard is equipped with a num lock key is turned on. I can't use on it please help me disable it. I do not use a NumLock on. Thank you

  Hello, please help me. I use a power keyboard for my laptop. I see in the new keyboard is equipped with a num lock key is turned on. I can't use on it please help me disable it. I do not use a NumLock on. Thank you

  You say that when you press the NUM LOCK key, the Numlock State does not change (if enabled to disabled and vice versa)?  Have you tried to unplug the keyboard and by ensuring that the keyboard of the laptop does not have enabled Numlock?  If so, turn it off on the laptop keyboard and reinsert the another keyboard and see if the problem is resolved.

  If you do not need the Numlock key, it can be disabled at startup with the following procedure:http://www.technipages.com/enabledisable-numlock-at-login-or-startup.html. Once this is done, I don't think he's going to turn on or off and that they the keyboard will start in the off position.  You will not be able to use the key yourself or another, but maybe the problem she is on (which is worse than it to be impossible to be turned on) will be resolved and I hope it will be enough for you.

  If the key does not work and you want to be able to use it, the keyboard may be defective.  Try the keyboard on another computer and see if you have the same problem.  If so, the keyboard is defective and must be replaced.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hello, please help, my pc crashes due to a problem with 0X0000000D1

  the files that appear in the windows help log are next
  BCCode: d1
  BCP1: 0000000000000038
  BCP2: 0000000000000002
  BCP3: 0000000000000000
  BCP4: FFFFF88001509F08

  Here is the link to the dump files:
  https://onedrive.live.com/redir?RESID=C85A646FF9D5C737! 265 & authkey =! ADsbTHQ6p0RmhLM & ithint = the file % 2czip

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to run the System File Checker tool to repair missing or corrupted system files.

  Please visit the following link to run the file system Checker:

  https://support.Microsoft.com/en-us/KB/929833

  You can also check out the link below:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Sincerely,

  Ankit Rajput

• Hello please help me I want to the closed mailbox

  Summary of the issue
  Other issues of Windows Live family safety

  What version of Windows Live Family Safety do you use?
  Other
  Choose your operating system version:
  Other

  Additional details
  How to do you service if allowed Eacha?

  I forgot my email and I can't allow the father to access the Inbox

  I want to remove the Sifata family

  Of this email

  [email protected]

  Thank you for tracking problems

  Hi saq..,.

  We've finished our investigation on the reported problem. I am pleased to inform you that the problem should be solved, and you should now be able to use your account correctly.

  In addition, we recommend that you uninstall Windows Live family safety on your computer to completely remove the relationship on your account and also to avoid the reconnection of account to the parent account.

  Thank you

  Joseph L.

• Please help me to write the plsql code

  Hello
  
  Please help me to write a program to retrieve the empno in plsql table and update the salary up 10% to help "for all" and handle exceptions using predefined '% bulk_exception' attribute. I asked today by the interviewer. Please help me
  
  Name of the table: emp
  
  emp_no ename sal
  100 John 5000
  101 3000 miller
  102 roy 3500
  104 tom 2000
  
  Published by: Anill Sep 8, 2012 22:17

  Anill says:
  Hi Biju,

  I agree what you say to the workout. Please do not treat it as laziness. I have no knowledge on 'for all' and bulk_exception attributes. So, I asked help to learn and gain some knowledge.

  Published by: Anill Sep 8, 2012 22:39

  This?

  declare
  type test is table of varchar2(2000);
  v_array test;
  l_err_cnt number;
  l_errors exception;
  pragma exception_init(l_errors,-25000);
  begin
  select empno bulk collect into v_array
  from emp;
  forall i in v_array.first..v_array.last save exceptions
  update emp set sal=sal+((sal/100)*10)
  where empno=v_array(i);
  exception
  when l_errors then
  l_err_cnt := sql%bulk_exceptions.count;
  for i in 1..l_err_cnt loop
  dbms_output.put_line('error: ' || i ||  --Handle Proper Error log table
  ' array index: ' || sql%bulk_exceptions(i).error_index ||
  ' message: ' || sqlerrm(-sql%bulk_exceptions(i).error_code));
  end loop;
  end;
  

  Talk to interview if we use in bulk collect, it consumes more memory PGA. then say do it in pure SQL.
  If they want to manage the DML ERRORS and then tell them that I will use DBMS_ERRLOG. CREATE_ERROR_LOG ('table_name')

• Oracle10g - please help me!

  Hello
  
  Please help me about the following doubts regarding oracle 10 g
  
  (1) why SNA is updated even if there is no transaction?
  (2) even after the removal of the DBF, its display of data, how?
  (3) why it takes time when going from newspapers n/b... and sometimes its beeing fast and taking in time sometimes...?

  user10526853 wrote:
  Hello

  Please help me about the following doubts regarding oracle 10 g

  (1) why SNA is updated even if there is no transaction?

  Well, you need to understand something first that SNA does not simply increase with the transaction being present. CPN is average Oracle to put implementation of the time and is still increasing. If in this way, YVERT also increases as well. In Oracle. each reading must be consistent if every statement, either, whether you should check that its reading of the consistency of the data only. So, with each reading too, you issue a request for the latest RCS and it is also one of the reasons that you would find that even with the statements too, its increase. The other reason, which Navneet mentioned. There is always something going on, so that would be called again for the CPN increaes.

  (2) even after the removal of the DBF, its display of data, how?

  Its good to mention the o/s when you ask the question like that. What you say is not possible on nix systems based on windows but only on .  The reason is that sometimes, in nix systems, even if the file is given for a deletion. the process does not release the inode of the file and Oracle always assumes that its there. The other reason might be that the data that you select is in the cache and remove a file from the IO/s empty its cache data. It may happen that you have found data selected from the cache.

  (3) why it takes time when going from newspapers n/b... and sometimes its beeing fast and taking in time sometimes...?

  A few times we arrive office early and a few times we get traffic jams, can you tell when what happens? You start the office early, no traffic is here. Get to the office early. You woke up late (thanks to the part of late night), and now you start on rush hour, you would get more delayed. It goes same for switching part too. The log again, on which you spend must be empty before you switch on him and it would be empty once the script to check its data by DBWR. The more the data, would take the dbwr more time. Or faster, you try to get back to the file due to the small size of it, before you ask for the file and even get delay in gettnig file might still get controlled.

  HTH
  Aman...

• Hello... I use iphone4 which is ios7.1.2. Now, want an update of ios 9 or high. Please help me

  Hello... I use iphone4 which is ios7.1.2. Now, want an update of ios 9 or high. Please help me

  Not possible, an iPhone 4 cannot run any version of greater IOS 7.1.2. You will need it to buy a new phone for what anyone higher than that.

• Hello, I forgot my security questions, I want to change but the need for an aid station. And I do not add a post before rescue. How can I add now? Please help me. TNX.

  Hello, I forgot my security questions, I want to change but the need for an aid station. And I do not add a post before rescue. How can I add now? Please help me. TNX.

  You can not and need to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (137646)

• Hello, I can not locate my files or my email. Please help me find these. Thank you!

  Hello

  All my email box are visible, but not my emails or folders that I had put in place. Please help.

  Thank you!

  So should guess us what email program you use?

• Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem.

  Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem?

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Hello, I bought a monthly license paid for indesign last night and I do not understand how to play with it? When I opened the window of creative cloud, they suggested me to buy indesign (but I bought it already...) Please, help me... It's easy to al amend

  Hello, I bought a monthly license paid for indesign last night and I do not understand how to play with it? When I opened the window of creative cloud, they suggested me to buy indesign (but I bought it already...) Please, help me... This is our easy to understand for beginners like me at all

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  https://forums.Adobe.com/thread/1962238

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• Hello. I have this loose "a page need valid if we´re seen hiddeen BP. I had finished my work and went past it wrong! Please help me. Thank you very much

  Hello. I have this loose "a page need valid if we´re seen hiddeen BP. I had finished my work and went past it wrong! Please help me. Thank you very much!!!

  You have successfully updated to the 2015.1.2 Muse, published earlier this week? To force the update go to "help > updates...". »

• Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks.

  Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks. This is what im seeing.

  

  See my response in audition 3 error with installation

• Hello, I would like to cancel the membership: the photographers creative cloud Plan (annual plan).  Please help Caroline

  Hello, I would like to cancel the membership: the photographers creative cloud Plan (annual plan).  Please help Caroline

  https://helpx.Adobe.com/creative-cloud/help/cancel-membership.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb ership_stillNeedHelp

• Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Why are publish you again? You must first answer the question I ask in your original thread.