Help Blue Screen of Death

Similar Questions

• More recent Microsoft Update caused 'blue screen of death '. screenshots included, HELP Please!

  Hi, I am running Vista on an Acer Aspire M3641 and I had no problem since buying it there, until the other day, it's about 8 months.
  2/3 days ago I updated my computer with the latest Microsoft Update before closing down, went to my friends house, came back, the machine and my computer crashed at turn on. The blue screen of death appears literally for a second or 2:
  http://img69.imageshack.us/img69/6483/100220101146.jpg
  Then, a message called error recovery Windows appears, he gives me the possibility of either start Windows normally (which comes to restart the computer) or launch a startup repair.
  Upon the choice of startup, waiting a few minutes ago the repair, then the messege "Startup Repair cannot repair this computer automatically" and he asked then whether or not he wants me to send information about the problem or not that he won't let me not do anyway, but it allows me to open a window called the details of the problem :
  http://img28.imageshack.us/img28/4053/120220101171.jpg
  AND:
  http://img230.imageshack.us/img230/9734/120220101172.jpg
  After that I have no other choice other than to click on finish, and stop the pc.
  I also tried to tap f8 to start the computer in safe mode, but it is not as
  work, I don't know what to do, if someone could help me that would be greatly appreiciated!
  Thank you in anticipation

  If you are able to get in Mode safe mode with command prompt then try the items listed in this article.  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• need help with the blue screen of death!

  Hey, I recently got two usus strix 980ti and since then iv been doing the blue screen of death when I try to restart my pc and turn off it crashed randomly one or two times as well.

  blue screen:

  Check with your hardware vendor for updates to the bios. Disable the bios memory options such as implementing caching or shading. If you need to use safe mode to remove...

  technical information.

  Stop: 0x0000007e (0xffffffffc0000005, 0xfffff8800554368c, 0xfffff88003938158, 0xfffff880039379b0)

  isub3xhc.sys - address fffff8800554368c base at fffff880054f5000, datastamp 560555f0

  then he dumps memory and reboots.

  any help would be full use thank you.

  Hello

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (look for the BIOS and driver
  updates.)

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on
  your system. For each driver in the list, additional useful information is displayed:
  load address of the driver, description, version, name of the product, the company that
  created the pilot and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - Device Manager - Display Adapter - write it down
  and complete the model of your video - double click - tab of the driver card-
  Note the version information. Now click on UPdate Driver (this can do nothing
  that MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it
  will update the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible
  even for the Poles that seem identical) and when the faster memory is placed
  in the system behind the slower memory. So it is best to also swap sticks in and out
  to check for those even if all the tests of memory are not a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For Vista/Windows 7 memory diagnostics tool

  Start - type in the search-> memory box - find top Memory Diagnostics tool
  -Right click - RUN AS follows ADMIN instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista
  Memory Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 Blue Screen Of Death after HDD Turnt off automatically. ;-; Help?

  So, I had a break from my computer for 30 minutes and then I went back and when I moved my mouse to wake it up. He did all the normal sounds and I was about to click on Cinema 4 d but then the blue screen of death that happened. This isn't the first time. The last time I lost some of my files :(

  Help, please.

  MEMORY. DMP: https://www.mediafire.com/?282vd0lmebffc8w

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• Inspiron 6000 - won't start Windows - Blue Screen of Death - the hard drive is Toast! Help me!

  I have a Dell Inspiron 6000 2-1/2 years, with XP Media Center.  Last night at the start, he went to the Blue Screen of Death.  I tried to restart about 10 times, each time by selecting a variety such as 'use last known good Configuration, Safe Mode, Etc.' nothing works.  Get to the point where the windows flag is waving in the wind (may be waving goodbye?) and then hangs at Blue Screen of Death.

  To make matters worse, this is the only hard drive, I have not saved for a few months and I can't seem to find my recovery/boot drive... I swear to you that I made a copy when you are prompted 2-1/2 years ago?

  in any case, I started press F12 and got to the dell diagnostic interface.  I ran the tests in the Section of the blue screen, and almost all categories of hard drives contained errors.  I tried Googling some of them and almost all of the shots indicate disk hard death is imminent.

  So, anyone have any ideas how I can:

  1 retrieve the data

  2. get Windows transferred to another hard drive (without having to buy a whole new copy)

  Any help is appreciated deeply... only 3 weeks until final and just lost a huge amount of assignments for my grad. school...

  Thank you

  Aaron

  
  

• Help in installing Windows 7 - blue screen of death error

  Hi all.

  I bought my new laptop yesterday and I tried to install Windows 7 Ultimate on it, installation is fine, but when it comes to the "Complete the Installation" part, the screen flashes once and I see the blue screen of death. I know that there are no hardware issues or disc problems.

  The laptop that I bought is a Toshiba Satelittle L50 - B - 11 c and the version of the BiOS is 1.40 if necessary.

  Is it preloaded with an existing version of Windows already?

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer. If there is no native driver, you will need to consider returning the machine and buying a machine preloaded with Windows 8 Pro with downgrade rights to Windows 7 Professional. Or look through the catalogue of manufacturers for systems already preloaded with Windows 7, usually the business sector will have these options.

  Resources:

  http://support.Microsoft.com/kb/2832566

  Return the laptop if it came preloaded with Windows 8 and purchase one already preloaded with Windows 7, they are always available:

  http://www.ZDNet.com/where-can-you-find-a-PC-running-Windows-7-7000013418/

  How downgrade:

  http://www.PCMag.com/Article2/0, 2817,2417359,00.asp

  Backup before reinstalling Windows 7:

  http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

  Follow step 1 to 5 in this tutorial:
  Downgrade from Windows 8 for Windows 7

  That follow this tutorial: (uEFI-mode Setup).
  Installation of the Dual Boot - Windows 8 and Windows 7 or Vista

• Blue screen of death WITHOUT Flash Player!

  When I try to watch video on YouTube I have Blue Screen Of Death. Sometimes after 1 min and sometimes after 10 min. I have installed Adobe Flash Player because it is not necessary to watch videos on YouTube. I checked disable "enable hardware acceleration and I always get BSOD.» I am running Windows 8.1 with all the updates, and also I've always updated Firefox when there is a new update. I tried to install Flash Player and tried all the solutions I found on the internet but non of them work so I uninstalled Flash Player. On Google Chrome, everything works normally, but I don't want to switch to him whenever I want to watch some videos in the fear of having BSOD. Please if anyone has a solution or an idea, it would be very useful. Thanks in advance!

  Hmm, since you have already disabled the main hardware acceleration, it could be a problem with the video (or audio) decoding. For video decoding, you can try these setting changes:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste media and make a pause so that the list is filtered

  (3) double-click the preference media.directshow.enabled to true to false

  (4) double click on the media.mediasource.mp4.enabled preference from true to false

  (5) double-click the preference media.mediasource.webm.enabled to false to true

  (6) double-click the preference media.windows - media - foundation.enabled from true to false

  The effect of everything that should be blocking MP4/h.264 decoding and place you in the latest format WebM (VP9) YouTube. You can check the result on this page, but that might not show up after leaving Firefox and start it again:

  https://www.YouTube.com/HTML5 (the two h.264 should be red)

  It's not so convenient for other video sites, but I'm curious to know if it helps on YouTube or has the same problems.

• Blue Screen of Death... Urgent!

  Hey all. It's a little urgent, so any help is appreciated. So the story:

  It all started last Saturday in the fourth. I plugged my 5s 32 GB iPhone in car charger and it blue screened, what frightens me. I quickly unplugged and and soft restarted as soon as I saw him, and everything was fine.

  Since then, so three days later, I had to restart about 50 + times. So today I got sick of this blue screen, and I decided that I would try to fix it. I looked around solutions, and many say that it happens shortly after a solution when you remove the screen, but I've had my phone for four months and have never had to remove from the screen.

  The next solution was to restore factory default, so I decided to try it, after that I backed up in iTunes which is

  Finally, I was getting it restored, when all of a sudden, BAM. projected again blue.

  Since then, happened across this restore Middle blue screen of death, and it's practically a piece of metal shit now. I can't do anything. I can't force the restart it you a blue screen. Can someone give me advice? I have some upcoming vacation and need my phone. Can anyone help?

  Try recovery Mode

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  You may need to do the above, more than once as recovery mode is difficult to enter.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

  If the steps above do not help, you tested it on an Apple Store.

• Satellite L450D - 13 X - black screen of death/Blue Screen of Death

  Hello everyone.

  I have a Toshiba Satellite L450D - 13 X for children, and for the price it's a good laptop. Have had no problems with it until two weeks ago, when the screen froze for boys while playing a game and downloading a program on the net. Had to make a stop of force and since then, we have a BSoD on each startup. That's what we tried:

  On "Starting Windows", we are given the option to either 'Launch Startup Repair' that ends as BSoD or "Start Windows normally" who returns to the list of option "starting Windows."
  Any attempt enter 'Safe Mode' BSOD results.
  Attempt to boot an ISO of the disk recovery Windows on a USB key (we did put highlight and make promotion up) results in BSoD. Borrowing a correct installation of Windows 7 DVD and highlighting what an option cause BSoD.

  In fact, the only option that we used who threw something different has been using advanced startup options. On one of these options, we've got the Blue Screen of Death with the following information:

  Unmountable_Boot_Volume
  Disable memory the Bios Options such as cache/occultation

  Technical info

  Stop: 0x000000ED (0xFFFFFA80023C2CDO 0xFFFFFFFFC0000185 0000000000000000 0 x 0 x 0000000000000000)

  I don't mind erase the hard drive and leave, there's nothing on what is essential. Very, very well, I'd appreciate a steer on it. Checked the Web for things and nothing seems to help for other options. I'm not particularly tech literate but can follow directions.

  Thanks in advance.

  It is really possible that the HARD drive is faulty.
  If possible try to get another same HDD used for test purposes and install OS using the Toshiba recovery image.

  A friend of mine had a similar problem and after Exchange of HARD drive, everything went well again.

• Portege R100 - Random Blue Screen of Death (IRQL not less or equivalent)

  Hello

  I've been making 'Blue Screen of Death' screens random in the last few weeks. The error is "IRQL not less or equal ' and it performs a memory dump each time. If I get the error and try to restart the phone after, I usually get the same screen of "Blue Screen of Death" when starting.

  I have not installed new hardware lately. Last update about a year; upgrade memory. I tried to replace the RAM with a spare that I had and I was still getting the same error.
  I have not installed new software in the last weeks, which would coincide with this error.

  I am tracking the temperature of the processor and I'm higher than 48 degrees Celsius.
  I'm not an expert, but I guess it's purely a hardware problem? As I rarely hear the CPU fan, I thought it might be overheating of the CPU.

  But even after that make the CPU fan to operate at 100% using a free software called "Fan speed" I always got the same random screen of 'Blue Screen of Death'.

  I would really appreciate any feedback and assistance. Really, I love my R100 and want to fix it.

  Select this option.

  Hey,.

  > If it's the memory controller can it be replaced?
  No, you can only replace the motherboard together. The memory controller is a part of it and it of not possible to replace the memory controller only.

  Theoretically, it could be the motherboard (memory controller) to malfunction if Memtest86 errors even you have replaced the RAM already.

  But 100% sure answer you can get a service provider approved because they have professional diagnostic tools.
  Then get in touch with the guy and ask for help. They can also order a new card of mother if she needs to be replaced.

• Qosmio G25: blue screen of death in the course of watching TV

  I also get the blue screen of death (Qosmio G25) and without apparent reason. I just watch a HD channel for an hour and it just hangs at random while the TV was going on. His crashed a few times before that too. But the strange thing is that I never changed anything, I just watched TV and went to the blue screen with the code everywhere.

  Does anyone else have this problem?

  Kind regards
  Stephen

  Hello

  AFAIK the Qosmio G25 was designed for the American market.
  All laptops that end in 5 are for the U.S. market.
  However, it is not easy to say why it happens.
  I assume you are using the image of Toshiba's own operating system.
  I checked the driver Toshiba U.S. page and found a few drivers.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp?

  You can check that you have installed driver TV tuner driver and BIOS versions.
  Maybe a BIOS update will help you.

  But the blue screen of death is usually due to the fault of hardware or software serious dysfunction.

• Blue Screen of death - now cannot load Windows (even in safe mode)

  Laptop last night (Satellite L500-19Z;) Win 7 64 bit) crashed while playing CIV4. Had a blue screen of death. before I had the chance to read one of the error messages about the computer restarted.

  It loaded windows in SafeMode very well then and informed me that he had loaded OK the problem safe mode will be linked to some recently installed software and I should uninstall programs I had installed until it loads normally. As it was late last night I closed and thought I would sort the morning (with the benefit of hindsight it may have been a mistake...).

  Today, when the computer tries to start, it tries a startup repair; Unfortunately it does not work every time and it says "Startup Repair tried several times but still cannot determine the cause of the problem"

  I looked at the paper it produces, but it passes all of the individual tests.

  I can't access also advanced recovery options system & support, that appears in the Startup Repair dialog box as it requires that I be connected, which apparently I am not (probably the machine never got to the windows screen connection before attempting repair system). The error message reads "you must be logged to access system recovery options. If you encounter problems to connect, please contact your computer administrator for help. Please click OK to restart the computer. »

  I had a go at the start in the advanced options (safe mode, safe mode with command etc., but the result is the same).

  I also tried the repair of your computer to the screen option options advanced boot, but after the screen where it asks you to choose the language and keyboard, I get the same error of connection mentioned above.

  Is it possible to repair or even run windows based hard drive recovery (do not have the DVD of recovery with me as I'm away from home for a few weeks) without connecting to windows? I expected here, but have not yet find a way to do it.

  (there is no disc in the disc drive, no other devices connected to the laptop - I tried with power outlet and the battery and have not noticed differences)

  Thank you
  James

  Hello

  Pitty, you cannot retrieve the HEXADECIMAL code
  On this side, I think that your HD or registry is damaged and you have to reinstall the entire system

  Good luck

  Post edited by: Praepositus

• Installed the network updated drivers hp support page now I get the blue screen of death

  Installed the network updated drivers for my laptop hp support page and now I get the blue screen of death a few minutes of Internet usage.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5171...

  I can reboot the computer, but it only works for a little bit before again becoming the blue screen.

  I tried to download and reinstall the hp 8 drivers network twice now. (Product number: QJ793AV-#ABA)

  I am running windows 7 (x 64) and downloaded all the updates as well.

  Any help would be greatly appreciated.

  I made an another windows update and seems to be ok for now

• Satellite A65-S126 - blue screen of death UNMOUNTABLE BOOT VOLUME

  Hello

  I have starting problems in windows. He is stuck in a cycle without end start. Pressing F8 helped me freezing the blue screen of death, he said: "a problem has been detected and windows has been shotdown to avoid damaging your computer. UNMOUNTABLE BOOT VOLUME. "The end

  Technical information:
  Stop: 0x000000ED (0x89B789E0, 0x00000000, 0xC000009C, 0x00000000)

  I bought my laptop with the OS XP Home Edition already installed.

  Thank you and I hope you could help me solve this issue.

  Saul

  Post edited by: saviar01

  You can enter OS in safe mode?

• Lenovo z50-70 used power up after the blue screen of death on windows 10

  Hello Sir/mam,.

  My laptop wouldn't boot / lights up once the blue screen of death appeared this morning.

  I am browsing and suddenly the blue screen appeared and I remember in the written form 'system error' and the laptop will restart. something like that. I can not really remembered the exact error. But I'm sure it's the BSOD.

  When I tried the laptop powered, the power light was for about 1-2 sec even with the fan, and then they continue or let's just say that it will not feed. I've done several times, but the result is the same.

  I also tried the solution on what I read here in the forum. "Press and hold the power down for about 30 seconds."

  I tried too many times but it won't work.

  Please help me to LENOVO.

  Thank you

  Thanks for the reply. I already solve the problem. I already did what you said so many times, but did not work.

  I just discovered that one of the ram is not working. That's all /... case closed