Help: Can I use the Combo Adapter REF 41N8480 with my X61s.

Similar Questions

• Can I use the library of creative cloud with Illustrator CS5

  Can I use the library of creative cloud with Illustrator CS5

  Hi Ilys Ravel,

  No, CC libraries function is available in version CC 20141 sur-quartiers.

  Sanjay...

• Can I use the car adapter More4You PX1189E-1NPO with Satellite A100?

  Hello
  I have the car more4you PX1189E-1NPO adapter and the Satellite A100-169 power supply 15V witch.
  Adapter and this laptop work together?
  (On the car adapter it is written: 'Use with all portable Toshiba up to 19V dc 6.3Amps').
  And Toshiba.eu says:
  UTES & OPTION_ID = 98981 http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/individualOptions.do?service=EU&action=SHOW_ATTRIB & tab = 1 #1
  "The adapter adjusts, conditions and regulates the power of entry to the correct voltage required for your notebook."
  On the Site of Toshiba Switzerland they even say it regulates to 15V.
  If I can use it with my laptop 15V, isn't?
  BR
  Phil

  Hello

  Jordan is right, he wasn't. I have the same card and the card is really just for the machines of 19V. It s easy to find, just look at the site of the compatible machines and you will be
  mention that each of these machines is a 19V machine.

  I think that that s a mistake of misunderstanding of the administrator of the site or who designed the site, then believe me, buy another, which is 15V and not to 19V.
  And Don t manual work on something that has been built and certified for this and for this machine. Believe me, this connector is already the right one for the machines according to,.
  Thus, if your machine is broken because you have modified the original equipment, then your warranty will be revocated and your machine has disappeared.

  Welcome them

• Can I use the Windows Vista I had with my Toshiba laptop on virtual machine?

  Hey all

  I have changed Microsoft for Macintosh, but installed on a virtual machine (oracle vm virtual machine) my Windows Vista I got with my Toshiba Satellite A350D Notebook previous. I installed Vista with the recovery disk. Now he asks me the Windows Vista product key. The sticker on the back of my laptop is more readable. I run the Belarc Advisor to get the product key in this way. But right now, he said: "it's the product key installed at the factory by the manufacturer rather than yours. You can change this to your product key here for Windows http://go.microsoft.com/fwlink/?LinkId=45668"

  My question: am I not allowed to use windows vista legally, I had with my computer toshiba laptop on other devices? I won't use the Thoshiba laptop. Do I have to delete the record from the Thoshiba laptop? Where can I get a new product key?

  Maybe someone can help me here. Thank you in advance for taking your time to read this.

  Betty

  Recovery disk or recovery image is designed for some cell phone only and is not a kind of universal image that can be used on other devices. It comes with the laptop.

  You can use the Microsoft Windows disk with valid license on each device. Recovery image is not only BONES. This is the package that contains the drivers and tools specific to Toshiba and utilities.
  As you also know recovery image when you install it on your laptop must be turned on not so the license code downstairs just proves you have purchased a valid license with your laptop.
  > Should I remove the record of the Toshiba laptop?
  Not why do this?
  > Where can I get a new product key?
  You cannot get it because you need when you use the recovery image on your Satellite A300D. I think even you will hear of Toshiba.

• Can I use the program creator-CD came with my laptop on the job?

  Hello!

  I have a Compaq 6530 b with XP Proffesional.

  I've had this laptop through my work about 4 years ago. CD-Creator program that followed is called 'Creator Business DVD' and is Roxio/Sonic. I've used this program in my work, but when I read today the license agreement, it says that there are three types of licenses, and I wonder who the license that accompanies my computer and how do I know?

  Because if I only have a license "singleuser", it seems that I can only use it for personal and non-commercial use.

  I would be very grateful if someone could help me find it.

  Creator Business v10 DVD
  Versjon: 10.1.048

  The software is certainly correct to use for your job. Especially in cases where it is simply to facilitate your work. I, of course, am not a lawyer, but my understanding of the license agreements, you are in the clear. As long the software is not used to make personal financial gains copied/redistributed, or can be used by other people that you shouldn't have to worry about what. The software is designed as a tool to help you finish your work, but never as a means for direct profit; that is create/copy software, music discs, DVD, etc... For absolute certainty are trying to contact Roxio on this issue because I can honestly say I don't have a full understanding of their terms and conditions, but also if you register the product you should be able to get more information on their Web site.

• Can I use the Bluetooth Dongle that came with my Kit with a different wireless keyboard HP wireless?

  Hello world! I am brand new here and although I did some research on this subject I couldn't find it - forgive me (and point me in the right direction!) If this has already been covered.

  I just bought a HP Pavilion, a touchscreen all-in-one. It came with a wireless (dongle, keyboard and mouse) keyboard kit. I don't like the keyboard at all, lol and would lke to use another keyboard wireless I have (a GE Board), BUT I do not have a bluetooth usb dongle - I have that the dongle supplied with the kit of HP wireless.

  I tried to get this dongle to talk to my new keyboard, but it does not work. I can't tell if it's user error or if she will NEVER speak to him, lol.

  Can I use it? Or do I have to buy one separately bluetooth dongle which is compatible with the computer and GE keyboard?

  Thank you for ANY idea - I'm going crazy here!

  Ali

  Hello

  Based on the following specifications, your machines don't have a Bluetooth:

  http://support.HP.com/us-en/document/c03791255

  GE keyboard is a BT device, you can use something like one of the followind dongle:

  http://www.latestbuy.com.au/Bluetooth-USB-dongle.html

  The dongle that comes with your computer may look the same, BUT it uses a different technology.

  Kind regards.

• Can I use the recorder DVD SD-R6572M with my Satellite A80-117?

  Hello

  Can someone let me know if I can replace the DVD drive on my Satellite A80-117 with a SD-R6572M.

  Basically I'm looking for any information ragarding the compatibility, before buying the disc.

  Pointers are appreciated.

  Kind regards

  Hello

  I found information that these drives are compatible with your device:

  Read-only Drives
  Ext. Slim Line 24 x CD-ROM Drive PX1052E-1NMD
  External DVD - ROM Drive PA3401U-1DVD

  Writable discs
  CD-RW/DVD Rom Drive PA3438U - 1 external CD 2
  External DVD Super Multi Drive PA3402E-1DV2
  External DVD Super Multi Drive PA3454U-1DV2

  Unfortunately, I put t know if the SD-R6572M is compatible with the Satellite A80-11

  Good bye

• can I use the latest version of MAX with labview 6.0?

  Description of the problem:
  We have an old system running LabView 6.0 and MAX4.5 with NOR-DAQmx 8.7 and
  NI-VISA 4.4.
  We had a hard disk problem that fixed us and now MAX 4.5 with NOR-DAQmx 8.7
  will be important is no longer the configdata.nce file.
  The error message is:
  The following products can not copy the destination system:
  NOR-DAQmx 8.7: error code 0x80004005 (no description of the available error)
  Continue?
  OK, cancel

  What can I do to overcome this? Can I load the latest MAX and NOR-DAQmx and
  expect it to work?

  Thank you
  Chris

  Software of NEITHER: LabVIEW version 6.0
  Materials: Select one if your problem is related to the hardware device
  Driver version:
  OS: Windows XP

  Perhaps the. NCE file was created with an earlier version of max, while the version has been installed after?

  If NEITHER responds, you might be able to send the file to look at.

• Can I use the old sndrec32.exe (comes with XP) in Windows 7 and Vista?

  SNDREC32.exe was demand for Sound Recorder in XP and it changed to SoundRecorder.exe in Vistra and Windows 7.

  The new version will allow to record more than one minute of audio, but (as with most things in life when something is given something is removed). The new version cannot be used in Word to easily enter audio commentaries that are built into Word.

  Anyone copy the old SNDREC32. EXE from XP to use in Windows 7 or XP and were there any problems?

  Peter Evans

  http://emarkingassistant.com

  I don't think you can do it, certainly not in the 64-bit version of W7.

  Have you read this article? That is what you want to achieve?

  http://Office.Microsoft.com/en-us/Word-Help/insert-a-sound-HP005257344.aspx

  Try to use Audacity to record your comments as mp3, then their incorporation in your Word document works for me.

  See you soon,.

  Jerry

• I can't use the scroll on my touchpad with Firefox feature

  Computer is Gateway NV52 series with a touch pad working under Windows 7 64-bit multi-geste. Try using Mozilla Firefox 26

  Try to change the pref ui.trackpoint_hack.enabled on the topic: page default config-1 to 0 or 1 to see if that makes the touch pad work better.

  Close and restart Firefox after changing the ui.trackpoint_hack.enabled preferably.

  • UI.trackpoint_hack. Enabled (-1)(-1:autodetect;0:off;1:on)
  • http://KB.mozillazine.org/about:config

• R7000: Smartphones connect to WiFi and can navigate using the browsers, but not Internet with applications

  Hi all,

  I just installed my new router WiFi R7000 and I feel some strange problems.

  My WiFi configuration consists of two WiFi networks, one on the 2.4 GHz frequency and the other on the frequency of 5 GHz.

  I have connected my two smartphones successfully to these two networks. The strange thing is that if I use all browsers, I am able to navigate, while if I run the application apps such as Google, Facebook, and LinkedIn, they are unable to get access to the Internet.

  I have the latest firmware installed (V1.0.6.28_1.1.83) and tried a hard reset and reconfiguration.

  This thing happened to someone?

  Thanks in advance

  I found the solution here http://forum.xda-developers.com/showthread.php?t=2177378

  I had to reduce the MTU to 1300 and now all seems fine

• Can I use the labview runtime engine 2010 with my LV 2012 program?

  Hi all

  I get the new Labview Developer Suite 2012 DS2 in a few days and

  I wonder if it is possible to run LV2012 programs on the LV 2010 runtime or is it necessary to update all my customers to the 2010 to 2012 runtime?

  It is essential to have the runtime for the LV version in which the code is developed.

  If you plan to distribute the new code stored in LV2012, you must also LV2012 engine run.

• Can I use the supplied remote Commander RMT-835 with the 18-200 on NEX-VG30 powerzoom?

  The NEX VG30 comes with the SALT-PZ18200, which has an electronic zoom that can be controlled by a lever on the lens and the camera. The camera also comes with the IR remote control RMT-835, which has a zoom button (which works on the other handycam to control the zoom). Now can I use the RMT-835 to zoom with the SALT-P18200 on the VG30 NEX? Can someone try that already has the VG30?

  Thank you

  Michael

  I tested the SELP-18200 on NEX-VG30 zoom control, and the RMT-835 zoom buttons can control the motorized zoom.

  By default, the remote control and the camera body zoom controls activate digital zoom. You must go on [MENU] - [camera/mic] - [Zoom lever] and select [Power Zoom] so that you can control the power via the remote control zoom and the camera body.

  If my post answered your question, please mark it as "accept as a Solution.

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• I use iphone 5 s updated to 9.2, but I can not use the network and call :( Please help me

  I use iphone 5 s updated to 9.2, but I can't use the network and call someone help me please

  What happens when you try to use the network?