Help! Cannot open a file created on CS8.2 with CC
Hi everyone, Please HELP!
I get this msg:
I am running:
Try to run the cleanup tool before you start the download. For installation problems CS cleanup tool | CCM, CS6, CS5.5, CS5, CS4, CS3
Tags: InDesign
Similar Questions
-
I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got the error message cannot open output file.
The file can be uploaded incorrectly. Could you it redownload again from http://getfirefox.com?
-
Disk defrag cannot open a file(system32\dfrg.msc) to run
This message appears when I click to open the defragmentation program:
MMC cannot open the file c:\WINDOWS\system32\dfrg.msc.
This file does not exist, is not an MMC console, or was created by a later version of MMC.Then what should I do? I looked around and I still have the file on the computer but I can't open it to all. My computer needs to defragment very badly. It there a way to get a new file or program? Or can I replace this question?
Help
Hi Highhopespf,
Thank you for using Microsoft Answers!I have seen that the installation of Service Pack 3 can sometimes fix this.The following link should help you get installed: http://support.microsoft.com/kb/322389Let me know if that helps!Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I get a message saying "Windows cannot open the file...". »
I had a lot of problems with infections, so I was running many scanning programs.
After getting my computer almost completely cleaned, I ran the Super Anti-Spyware program. We find 3 infections, which I'd delete (I don't have no way of knowing that I removed).
Since then, whenever I try to open a program, or even Windows Update, etc., I get a message saying:
"Windows cannot open the file. To open this file, Windows needs to know what kind of program has created. Windows can go online to search automatically, or you can manually select from a list of programs.
When I go on the web, I get a lot of options, which are almost free scans that then charge for fixing. I am also very scared that I can also get another infection from these sites.
I hope someone can help me solve this problem.
StanEp
Yes, each method is a set of measures to try and then go ahead and try each one separate.
2 method will reset the executable (.exe) extension that will allow you to open programs. It is not clear what exactly you are trying to open so that it can have no effect.
Keep in mind that the damage caused by malware can be irreversible, in the case of relocations are necessary.
-
Can help please I want to play freecell and solitaire that came with my pc but I get this error message... Why would he do that? How can I solve this problem?
original title: windows cannot open this file: free cell.exe.mui.Hello
1. don't you make changes to the computer?
These can help you:
Method 1: Perform a system restore
To get the procedure perform system restore, open the site mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
Method 2: Clean boot
For the procedure to place the computer in a clean boot, open the site mentioned below
http://support.microsoft.com/kb/929135.
Note: To set the computer back to start normally, use the step 7 in the same link.
Method 3: Check the new user account
Open the site mentioned below for steps to create a new user account
http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account.
I hope this helps.
-
Original title:
MS Info
I need to send a file Ms Info to Wb tech support so that they can help me with the game on steam download. Whenever they open the file it says it gives the following message "information MS cannot open this file. The file may be corrupt or incompatible with this version of the information system. "I tried to open it too and had the same error message how can I send a file not corrupted for them?
Information MS cannot open this file.
They should use Notepad to open the file when it is a txt file.
Another way to create a portable system information file is to select the hotkey Win + R, type msinfo32 , and press ENTER . Click file, Save and name the file. This method creates a file with an extension of nfo file. Perhaps the recipient expects the file in this format.
-
I have create a new Plugin.
But happen error LNK1181: cannot open input file "... \..." \.. \build\win\objR\PMRuntime.lib'
Why?
I looked at the project and have it fixed with success, but unfortunately I can't send that overall because of the way the project was sent initially. Most absolute paths are the paths used in the project file and that's your project needs changes to much space when focused on a new machine. I'll give you advice on how to solve your problem and how to improve the project is configured for better portability.
How to solve your problem.
- Remove $(MODEL_PLUGIN_LINKLIST) from the list and it will work well for you. The wrong way is written in the sdk file attachments that are included in your file accessories
- After taking the first point, you will again have a binding error, to solve, it adds ASLSupport.lib to the additional dependencies in the section of the linker.
How to set up a project in a more portable way
- You should avoid using absolute in several locations paths, because when you move the project to another machine, you will need to change the paths to all these places
- Even using relative paths does not solve the issue properly, because in this case you must place the project from a location on each computer so that it works correctly. This is the reason why it was not $(MODEL_PLUGIN_LINKLIST) for you. The Adobe sdk samples use relative paths, so move the project so that by using their configuration fails if the relativeness of the road is not maintained
- In order to be totally portable, we should make use of macros and define them in one place. So that when you move the project, change the paths in this single file solves everything. An example of this is how you set the id_sdk_dir macro in your file attachments.
Hope these points help you to solve your problem and put in place the project in a better way.
-Manan
-
Click on the link-get "Windows cannot open the file" select a program?
After clicking on link get "Windows cannot open this file" have to manually "selecta program programs installed" Firefox appears as a choice and I double-click. How can I solve this problem / eliminate these extra steps
? Thank you Joe
I am running Windows XP, MS office Outlook 2007Is it a link in an e-mail message in Outlook? This problem arises from time to time.
While Firefox can usually set himself as the proper application to open the URL, you click in other programs, settings are sometimes blur or do not take. This article has tips to solve this problem: setting Firefox as the default browser does not work - what to do. Anything there help?
If the problem persists, is there something special about how you start Firefox? For example, you have this launch in a security 'sandbox' or virtual machine? You have all the command-line options set to allow several simultaneous sessions of Firefox, or call the Profile Manager? If none of this sounds familiar to you, the answer is probably not.
-
Word 2011 will not open docx file created under Windows
Word 2011 will not open docx file created under Windows sent me by mail after I installed El captain.
No problem when I create a new file and re-open it. Can anyone help?
I don't know that someone on the Microsoft forums can give you some useful tips.
-
When I start my computer, I get this error message:
Windows cannot open this file: GLBD4EA.tmp
To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.
What do you do?
-Use the web service to find the appropriate program
-Select a program from a list of installed programsNo selection works for me. I don't know what concerns the .tmp file, or why I need to open it.
Please help :)
Hello
Perform the following steps to remove the file from the registry.a: type regedit into the search box start and click on enter.b: Search now to the following keyHLKM\SOFTWARE\Microsoft\windows\currentversion\runthen delete the following key53E412B3-9907-4F9E-A6DC-D0106D1D72CImportant: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:Hope this information helps. -
Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:
MMC cannot open the file:C:\Windows\system32\ServerManager.mscIt is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.PMHello
Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.
http://social.technet.Microsoft.com/forums/en/category/WindowsServer
-
Cannot open .exe files.
I can't open files type .exe on my system. When I try to open it, Windows Meadia player open type .exe file and an error message that Windows Media player cannot open this file. This problem is about of any programs like Internet explorer, Microsoft Security Essentials etc. What should do? Please help me. Answer me to * address email is removed from the privacy *.
Hello
1. what operating system do you use?
2 did you change on your computer?
I suggest you follow the link and check.
If you use windows XP, see the link.
http://support.Microsoft.com/kb/555067
If you use windows 7 see the link and check.
When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
-
I can't even go to open, ' Change / Remove Programs "Control Panel. Same shortcuts on my desktop are not open without WMP trying to open the first file. Why is it in the middle of everything? How can I disable WMP or stop trying to open all files, media files that are not same? There version of WMP 9, but when I try to download a newer version, it won't work because WMP keeps popping up, saying: it cannot open the file.
Hello
Were there any changes (hardware or software) to the computer before the show?
Perform the steps in the article mentioned below and check if the problem persists.
Windows Media Player invalid file Error Message Format
Hope this information helps.
-
Cannot open any file, start the system restore or use my original XP pro CD
original title: no CAN NOT OPEN ALL the FILES ON MY OS, I can't START the SYSTEM RESTORE, I can't EVEN USE MY XP PROFESSIONAL ORIGINAL CD... HELP PLEASE!
I HAVE A DELL INSPIRON / B130 LAPTOP WITH XP PROFESSIONAL OPERATING SYSTEM. I GOT HOME THE OTHER DAY TO FIND MY ROOMMATE ON MY LAPTOP, AFTER THE LECTURES OF THE PERSON TO KEEP YOUR HANDS OFF. I OPENS AND DISCOVERS WHAT HAS HAPPENED. THE PERSON DOWNLOAD FREE DOWNLOADERS VIDEO 4 X, AS WELL AS FILMS AND OTHER JUNK ON MY COMPUTER... ETC I WENT TOO ADD REMOVE PROGRAMS AND DELETED PROGRAMS THAT KEPT DUPLICATE ITSELF. I SHUT DOWN MY COMPUTER, TO THE REBOOT. NOW I GET THESE MESSAGES... "WINDOWS CANNOT OPEN THIS FILE", EXE, FILES,. INK AND WELL BASICALLY ALL THE FILES FILES. I CAN'T OPEN THE SYSTEM RESTORE, ENTER ADMINISTRATOR, I CAN'T EVEN USE MY WINDOWS XP PROFESSIONAL CD ORINGINAL, IT SAYS: ERROR. 3514 LINE, I DON'T KNOW WHAT ELSE TOO CAN YOU PLEASE HELP ME? Thank you
Hi Colleen,
Please take a look at the following suggestions for a possible solution:
-
When I run the defrag I get a message that says "MMC cannot open the file c:\WINDOWS\system\dfrg.msc. It is perhaps because the file does not exist, is not the MMC, or was created by a later version of MMC.
Hello
I tried the steps before I posted my question, but it did not work. However, I downloaded SP3 again and it seems to work now.
Thank you
Maybe you are looking for
-
My Iphone OS app store won't load does not correctly. The 'top charts', 'expore' and 'Search' options load permanently with the circle of rotation. Nothing is displayed. The "Star" and "updates" appears, however. I checked to see if I needed software
-
I want just all my emails on the page (from top to bottom) like it was yesterday. I'm not sure I did something to cause the bottom of the page to display a light blue box saying welcome to Thunderbird. I need it to go. Thank you for your help. J
-
How do I find what version of BIOS is on my Satellite Pro 4340
I was looking at the part of download Toshiba Utilities of the Web site and did a search for updates which could be downloaded for my Satellite Pro 4340 and noticed that a BIOS update is available. How can question - I find out what version of BIOS i
-
How to find iPhone I have?
How to find iPhone (#) I have?
-
CDAQ-9178 or CDAQ-9481 on windows 7. I have a sub vi who still works and who will write in the relay module. Is memory management, better to erase a digital writing each time it executes in the sub vi, or wait until the program ends and disable the t