Help carry a flash coder flash file in cs4 first.

Similar Questions

• Need help with my Flash file

  My continuous flash file in a loop at the end of my stop ignoring and defer orders.

  It works perfectly until the last frame/command. I want it loop to the first image, and for this, but then the movie will not properly there after. Is there anyone who can help me with this file, please?

  Thanks for your time.

  Here's what the file looks like

  http://safarianimals.freeiz.com/2010_FHNRZ_Header.html

  Here is the swf file

  http://safarianimals.freeiz.com/2010_FHNRZ_Header.swf

  Here you can download the original FLA file

  http://CID-04caffbb2769932f.SkyDrive.live.com/self.aspx/Flash%20HELP/2010 ^ _FHNRZ ^ _Header.f the

  Thanks for the help

  Here ya go Linda.  This has proved to be a little more work than I anticipated, but not too bad.  This is because I thought I was just able to enter and change what you had, but I didn't understand how you did, or really know anything on the as2, so I just redid it.  Images are resized and I think it does what you want.  Take a peek.  Everything is controlled by AS3, there is nothing on the stage of the timeline.

  I did a lot of comments, but let me know if you need any help to understand the logic and flow to tweak it for your own use.

  Here is the HTML link:

  http://www.GTCC.edu/distance/learning_objects/Flash/test/Linda/2010_FHNRZ_HeaderCS3_IQ.htm l

  The SWF file:

  http://www.GTCC.edu/distance/learning_objects/Flash/test/Linda/2010_FHNRZ_HeaderCS3_IQ.swf

  The CS3 fla file:

  http://www.GTCC.edu/distance/learning_objects/Flash/test/Linda/2010_FHNRZ_HeaderCS3_IQ.fla

• need help: enter the flash file in Dreamweaver site with dark background

  Hello
  I entered a SWF in a site dreamweaver with a dark blue background. When you view the site in a browser, there is a white square (the size of the flash file) which flashes for one second before the file begins to load. It is rather ugly and I was wondering if anyone knew how to avoid this white square of flashing to the top.
  I tried already to make the bottom of dark blue table and adding a dark blue square as a background image, but that didn't make a difference.
  If you do not want to see what he does, it is a link to a page: www.billmather.co.uk/portraits.htm
  Thank you in advance for any help or advice you can give me!
  
  
  

  Hey Horus,
  It worked! Thank you very much. Really appreciate your help.
  Have a good weekend,

  Famke222

• Need help placing the Flash file in Captivate...

  I have a few short animations in Flash, I want to put it in Adobe Captivate. They place well and play very well. But I wanted to know if it is possible to have the last image of the animated program for the rest of the captivate slide. I use 6 Captivate and Flash Pro CS6. Thank you!

  http://flashexplained.com/ActionScript/controlling-the-timeline-with-ActionScript/

• How to import MXF files in CS4 first?

  The MXF file comes from a canon XF305 camcorder that I borrowed.

  I can play MXF files in VLC Player, but when to drop the mxf in first cs4 file, it gives an error and does not play.

  Y at - it a free solution to make it work?

  The platform is 8.1 64-bit windows.

  If I use ffmpeg demux the file into m2v file, I can then use premiere cs4.

  ffmpeg-i input.mxf - vcodec copy output.m2v

  I don't know why it does not work as an MXF file.

• Big flash file does not open please help

  Hi all
  
  Can someone help me please. I have a flash file that is 74 193 KB, it opens quickly on my pc but when I place the load on my site it takes forever to open. What can I do to make it open fast iss he os on one of my important links.
  
  
  Please please help
  
  

  generally, when creating for the web, you don't want more than 1 MB or more... people don't like waiting for things to load a T1 connection... it would take 6 minutes, Dial-up would take 3 hours... you certainly need that flaked into small sections and make it more dynamic.

• Need help with flashing file + question mark at startup

  My Macbook Pro has worked fine until yesterday. On startup, I get the flashing file, so I rebooted and held command + R. Once I have try disc recovery/upgrade to update OS/restoration I need a startup disk file to choose and everything is empty. How can I get the possibility of a boot disk? Do I need a physical disk? I just checked my box of the laptop and I don't have a physical disc.

  Thank you.

  If a flashing question mark appears when you start your Mac - Apple Support

  Which shows in disk utility that is located in the recovery?

  Cutting in-house of may have failed or yo have a problem with the internal connection.

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Layers will not appear on the top of my Flash files.  Help, please!

  I have a little problem, I created a test using Dreamweaver 8 site to show how layers will be show/hide on the overview of the buttons. The problem I have is that these layers which are placed on top of some files Flash will not be displayed when I transfer my buttons. Can someone tell me why? If you look below, you will find two links, "index1.html" shows layers will be show/hide, but that's because it isn't a Flash file in the blue zone dark. In "index2.html", you will see that the layers don't hide/show when I transfer my buttons due to the dark blue area is a Flash file. Is there a way to solve this problem in Dreamweaver 8?
  
  index1.html
  index2.html

  All active content on a page will always come to the top, so to speak,
  including Flash, some elements of form, Java applets and controls Active X.
  This means that each one will push through the layers. It is not a good
  Cross-browser/platform reliable way to solve this problem, but if you can be
  confident in your visitors using IE 5 + or NN6 +, you can then use the Flash
  setting wmode (However, Safari does not support this correctly!).

  Adobe articles:
  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15523
  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14201

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "rmiman" wrote in message
  News:ern2d7$p9p$1@forums. Macromedia.com...
  > I have a little problem, I created a test using Dreamweaver site
  > 8 to the
  > show how layers will show/hide on the overview of the buttons. The problem
  > I am
  > have is that these layers which are placed on top of some Flash files
  > don't
  > appear when I transfer my buttons. Can someone tell me why? If you look at
  > below
  > you will find two links, "index1.html" shows that the layers will be show/hide
  > but
  > It's because it isn't a Flash file in the dark blue area. In
  > "index2.html" you will see that the layers don't hide/show when I rollover
  > my
  > buttons due to the dark blue area is a Flash file. Is there a way of
  > Difficulty
  > it in Dreamweaver 8?
  >
  > http://www.rminc.com/medresource/index1.html
  > http://www.rminc.com/medresource/index2.html
  >

• Flash file works great as a .swf on desktop but falls when published as a .apk

  My flash file works great as a SWF on the desktop but falls when published as an apk. When I run the application, the start menu appears as it should, but the Start button does not work. The trouble is that credits button works fine... «I also won an error warning that says: "" warning: library path "$(AppConfig) / ActionScript 3.0/libs/11.0/textLayout.swc" is not resolved to a valid file.» " Told me that maybe I had not clicked on"merged into code"but after trying it, it doesn't seem to change anything. Anyone have any ideas?

  Here are the files that I use.

  QuipQuiz for Android.apk - Google Drive

  QuipQuiz for Android.swf - Google Drive

  ActiveQuizCS4.fla - Google Drive

  Any help anyone can offer would be greatly appreciated.

  Note: just realized that I am also a separate warning on the publication that says: "Warning: Application has not specified its requirements for authorization in application.xml"

  I just had this problem with an older file created in Flash. If you go to file > settings ActionScript... Animate will open the Advanced ActionScript 3.0 settings dialog box. Below the initial settings, you will see 3 tabs: Source path, library path and Config constants. Click the library path. He'll show CFCS and ANE files or folders. Select each line, and click the sign - off. When I published again, I don't have the error.

• Help! CC Flash crashes on export

  I created a flash file that I want to export as a .swf (film). Flash crashes continuously at the same place (44% completion).

  I've run Tech Tool Pro version 7. Nothing is displayed.

  Took 6 gigs of ram that were not exactly the same as the other 6 gigs of ram that I have on my machine. Still crashes.

  The code I see is

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_PROTECTION_FAILURE at 0x00007fff5fb82ff8

  My machine is a Mac Tower in early 2008.

  OS X 10.9.3 (13D 65)

  CUDA driver version: 6.0.46

  GPU Driver Version: 8.27.21 (334.01.01f01)

  Processor 2 x 2.8 GHz Quad - Core Intel Xeon

  Memory 6 GB 667 MHz DDR2 FB-DIMM

  NVIDIA GeForce GTX 285 2048 MB graphics

  Model identifier: MacPro3, 1

  Processor speed: 2.8 GHz

  Number of processors: 2

  Total number of cores: 8

  L2 Cache (per CPU): 12 MB

  Memory: 6 GB

  Bus speed: 1.6 GHz

  Boot ROM version: MP31.006C.B05

  Version of the SCM (System): 1.25f4

  I can post a link to the document that shows everything I get error to break if someone needs it.

  Thank you for ANY help you might be able to lend!

  Hello

  If you provide other requested information, can you please update to the latest Flash CC 2014 and see if that helps?

  Thank you!

  Mohan

• Automation of several Flash file by using the XML file 'mailing list '.

  I created a Flash interactive multi-fichiers 'demo' for a client. It is very well as a Web site (although he doesn't use it as a Web site) in the way it is stated that there is an index page which can then direct you to product categories, which you can click to see. Each 'page' contains the product (or product category) information, photos, diagrams, etc. There is nothing of Flash animation.

  My client also wants to be able to put in place so that the demo runs automatically in a configurable XML file. My ActionScript skills are fairly limited, but I was able to by using ActionScript 3 to load and read XML file. A loop using 'for', I am able to read the XML file and returns the path of each Flash file and the time that each file must be displayed (my client asked that he able to configure the duration of each page as well).

  I created a charger for each video clip and a timer for the duration. Unfortunately, the thing that throws me off is that when I try to load the clip (as the last element in the loop for), it reads the entire XML file, returns all the clips and the durations (I use trace to see this) before loading the clip. Thus, the single loaded clip is the last reading of the XML file.

  As I said, I'm not very good at ActionScript, so everything I managed to combine was internet tutorials.

  This is my code:

  var xmlLoader:URLLoader = new URLLoader();

  xmlLoader.addEventListener (Event.COMPLETE, xmlLoaded);

  var mcLoader:Loader = new Loader();
  mcLoader.contentLoaderInfo.addEventListener (Event.INIT, playClip);

  var mcCurrent:MovieClip = new MovieClip();
  stage.addChild (mcCurrent);

  var xml;

  function playClip(e:Event):void
  {
  trace("Function:playClip");
  stage.removeChild (mcCurrent);
  mcCurrent = MovieClip (mcLoader.content);
  mcLoader.unload ();
  stage.addChild (mcCurrent);
  }

  function xmlLoaded(e:Event):void
  {
  trace ("function: xmlLoaded");
  XML = new XML (e.target.data);
  
  var cl:XMLList = xml.clip;
  for (var i: uint = 0; i < cl.length (); i ++)
  {
  trace ("Begin"for"loop");
  trace ("variable" i "is" + i);

  clipPath var = cl[i].@path;
  var delay = cl[i].@duration;

  trace ("Clip path is" + clipPath);
  trace ("Display for" + delay);
  
  mcLoader.load (new URLRequest (clipPath));
  }
  }

  xmlLoader.load (new URLRequest ("filerunlist.xml"));

  
  I removed the timer event because, like all the rest was repeated until whatever it is obtained, so I wanted to figure out out to get the charger clip (mcLoader) to load the clip for each file, before I realized where put in the time to make sure each element is displayed for the appropriate duration. I suspect that the timer event must occur in the function "playClip", but that it would take advice on that as well.

  Thanks to anyone who can help me understand this.

  You need to do in the service of parsing xml is just to store all data in a table.  You will use while an array element after another through some timer control you set up, access each file in the order that they are stored in the table.  You do not load in this function, all data storage, and when finished, the last line of this function outside the loop, fires at any function you have who begins to treat the first element of the array.

  For example, to store the data objects in the array...

  var clipData:Array = new Array();   store your data xml here

  var clipToShow:uint = 0;                   use later in the function showClip

  function xmlLoaded(e:Event):void
  {
  trace ("function: xmlLoaded");
  XML = new XML (e.target.data);
     
  var cl:XMLList = xml.clip;
  for (var i: uint = 0; i
  {
  clipArray.push ({clipPath: cl[i].@path, delay: cl[i].@duration});

  }

  showClip();
  }

  function showClip() {}

  Regardless of the process of loading .clipPath clipArray [clipToShow]

  and using clipArray [clipToShow] .delay to start some timer is involved

  the timer handler function calls this function when it is run

  clipToShow += 1;   increment the counter for the next clip online

  }

  If you are not comfortable/familiar with the approach of the object, then you could also store the clip and delay data in two separate tables.

• Change the link to a Flash file, so it opens in a new tab

  Hello everyone. I have a flash file on my client's Web site home page. When you click on 'Enter', the new page opens in a new tab. I want it all to stay in the same tab. If you want to see all the code yourself in order to identify how I could solve this problem, the site is: www.amycarriermodel.com - but if not then I'll paste the code of the object flash below:

   <object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="720" height="540">
    <param name="movie" value="Scripts/FrontPage2.swf" />
    <param name="quality" value="high" />
    <param name="wmode" value="opaque" />
    <param name="swfversion" value="6.0.65.0" />
  
  
    <!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
    <param name="expressinstall" value="Scripts/expressInstall.swf" />
    <!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
    <!--[if !IE]>-->
    <object type="application/x-shockwave-flash" data="Scripts/FrontPage2.swf" width="720" height="540">
      <!--<![endif]-->
      <param name="quality" value="high" />
      <param name="wmode" value="opaque" />
      <param name="swfversion" value="6.0.65.0" />
  
  
      <param name="expressinstall" value="Scripts/expressInstall.swf" />
      <!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
      <div>
        <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
        <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
      </div>
      <!--[if !IE]>-->
    </object>
  
  
    <!--<![endif]-->
  </object></center>
  
  
  

  Any help is greatly appreciated! Thank you

  You must be able to adjust the code for the button of the Flash file to specify that it opens in the same window (use "_self" as the argument of the window).

  If your slide show program does not provide for the addition of this argument, and if you have no fla file for the swf file that you created, then your only hope might be to buy a decompiler program and see if you can create a FLA of your swf with her.

  Other that this, create your own slide show using Flash and you will have no problem affecting this button up... but that's probably easier to say what to do if you have any Flash experience.

• Impossible to uninstall Flash file from the location: C:\Windows\SysWOW64\Macromed\Flash\Flash.ocx

  Hi all

  We cannot uninstall location Flash file: C:\Windows\SysWOW64\Macromed\Flash\Flash.ocx

  We tried the following options:

  1. http://www.instant-registry-fixes.org/uninstall-flash-player-to-fix-flashocx-error/.

  2 the Uninstaller (www.adobe.com/go/tn_14157) mentioned in the administration guide(http://www.adobe.com/content/dam/Adobe/en/devnet/flashplayer/pdfs/flash_player_11_5_admin _ guide.pdf)

  Appreciate your help.

  Thanks in advance.

  Hello

  From Windows 8 Microsoft embeds Flash Player in the browser.  This includes Windows Server 2012.  For this reason, Microsoft locks the permissions on files to prevent users to erase files.  Microsoft does not provide a standalone installer of Flash Player for IE/Edge on these platforms and all updates from Microsoft via Windows Update.  By force to unlock the file and forcing the removal of the file you probably made your system unable to re - install Flash Player because there is no separate standalone installer for Flash Player on Windows Server 2012.  If you do not need Flash Player on this system, which is not a problem.  But if you need Flash Player on this system, you can, or can be not, be able to reinstall it.

  --

  Maria

• I downloaded a Flash file to my host using FileZilla. Now how to do it to my Web site?

  I downloaded a Flash file to my host using FileZilla. Now how to do it to my Web site? DVD Flash folder created in yet. I want to put it on a website to play as a DVD. I got a GoDaddy ftp server host and they told me to install FileZilla to transfer files to my place. But I'm Muse now and I do not see how to bring it in my current project Panel.

  You can either file to your content page or you can add the files to download in Muse and then use any player to add code to read the file on the integration page.

  Thank you

  Sanjit

• How can I make an interface with buttons flash to open and navigate other flash files?

  Hello, I have a user interface that will serve as a tool to load and unload materials other flash like a slide show. I would like to make some kind of slideshow with Flash which opens to other flash files that could be around 10-15 slides (images) long each. I would like to ask if there is a way to make a connection between the navigation and other slides easily. And if there are ways, what action codes should I use for this. Thank you very much.

  All you have to do is load a swf in the main swf file and the target with what controls you intend.  If you are using AS3 while you use the Loader class to load the swf file and target the Loader.content with your control buttons.