Help coding H264 Blu - ray!

Similar Questions

• What is the best setting for H264 Blu Ray bit rate, which will play OK on most / all blu ray players.

  What is the best setting for H264 Blu Ray bit rate, which will play OK on most / all blu ray players. When you use CBR and VBR. What are the benefits of progressive and interlaced with regard to playback on all players.

  You don't need to worry about compatibility with Blu - ray playback.

  I prefer a variable bitrate for its effectiveness.  (Not necessary spending 25 MB on a framework in need of 10 right?)

  Using interlaced or progressive will depend on what you shot.  (Take note that 30 p is an atypical, so do not pull that.  Pull only 720 p/24, 720 p/60, 1080 p/24 or 1080i/30).

• Help with requested Blu ray burning

  I use for many YEARS now very successfully without any significant problem until I entered the world of HD and Blu Ray. My system specs are at the bottom of this post.  I've been recording HD for a few years now on my Sony HDV camcorder and rewrite the final production on HDV tapes.  I recently decided to move to the top and get a blu ray player, writer now that burners and media are affordable (well enough)... and the beginning of all my problems.

  Normally, I create 10 minutes productions finals about an hour of footage. However, after a 3 week trip to China, I have created a 50-minute production which I want to create a Blu Ray disc.  The production contains many transitions, titles and still images (taken with 10 megapixels).

  I can make the OK project although it takes a few hours.  However, my system crashes (blue screen) about 85% of the way through the Blu Ray encoding process.  I've split the 2 separate projects - one of 20 minutes and another 30 minutes.  20 minute we burn Bly Ray ok, but the 30-minute project still hangs (blue screen again) towards the end.  An obvious solution would be to divide the project down in to 3 separate projects and burn on Blu Ray 3 discs but this kind of ruins to the point of having a Blu Ray burner because I could created 3 AVCHD DVD discs instead.

  The problem seems to be the lack of memory.  The encoding process seems to work in space from 1 to 2 GB until very near the end, when the requirement of memory seems to soar upward to the 4 GB limit.  My suspicion is that first tries to use all of the system memory and tramples needs system thus causing the entire system to blue screen.

  I travelled through the forums and found that many users have had similar problems, but not found solutions.  A that someone managed to create a decent Blu Ray size disc of Premiere Elements - and nobody knows the minimum configuration to do this.

  System:

  First Elements 8

  Sony Viao VPCCW1S1E - Intel Core 2 Duo P7450, running Windows 7, 4 GB of memory with all works on the system c: drive.with 150 GB free.

  NVidea GeForce GT 230 M video adapter

  Thanks Steve

  (3) choice of AVCHD - when my project, in about 45 minutes PE8 starts to become slow and unstable (is not surprising given the system I use) so I divide it into 2 separate projects and the only way I could find to merge into a single project was to convert each project to the HD file format that I could import them into a new project.  I used ' share PC / MPEG / H264 1920x1080i 25 '-this created a file AVCHD I could import in PE, return and then re-export.  How to create a HDV file (without writing back on tape and then reimport?)

  AVCHD is very difficult to change. Many users would recommend an i7 overclocked processor, sitting in a very robust system. Unfortunately, camera mfgrs. This introduces, but forgot to tell their clients that they would purchase a State-of-the-art, just computer to edit it.

  In regards to HDV, there is a FAQ entryabout this operation. I don't shoot AVCHD, so I can't guarantee this FAQ entry, but given that Steve Grisetti wrote, be considered as gospel.

  Hope that helps,

  Hunt

  PS - Pre is designed to work perfectly with a length of projects (either) DVD SD, but it OK with BD projects now. Yet, when the duration of the timeline stands here, break the project into manageable pieces is the recommended route. It's one of the things I like about PrPRo - it uses sequences (think to of mini projects into one"master"), and I use them as my "chapters."

• Hello! Need help! HP DV7-3065DX need help to play Blu - ray DVD

  Hello

  I think I posted earlier today and would like someone to help me a lot.

  Have had my HP DV7-3065dx for a few months.

  Used and upgraded to 8 GB of Ram.

  Short great regarding everything except just now, I can't watch Blu - Ray DVD.

  I was able to watch a DVD Blu - Ray all along until a few days ago.

  Now he would not play any DVD Blu - Ray it has played before.

  It will however, play regular DVDs.

  Everything seems to work, but this problem.

  I have windows 7, 64 bit, 2.4 ghz

  Have cleaned the optical lenses, but nothing helped.

  Having executed all downloads for HP and all that WELL said!

  All driver downloads should be current.

  Have heard of this problem a little bit after reviewing the discussions today with other systems.

  Please help me.

  Thank you

  Mike

  Hi Cheryl,

  While I was waiting on someone, I read a blog about my problem.

  The very smart owner of HP computer laptop nice posted two Web sites to go, download.

  I read the post further and found one of the two did not work.

  The other is!

  One who did was file SP50778 ~ ~ ~

  I tried it and it worked! Can explain you what I was doing and why it worked? What is the download as this address worked! I have to go back somewhere and find now.

  I would like to see other people to read through blogs and save yourself a lot of time trying things when you can read the reviews before of the hand and still know what works, based on the dates of blogs.

  Once again, I read your response and am happy that you me sent a response, but it would be really nice to know why these things happen and what I can do in the future for this and other issues.

  This problem will occur again if I download things like apps and others?

  Not sure if your leadership would have worked. Can you explain on SP50778 and give me a little more education.

  Thank you very much!!

• Problem with the drive of Blue Ray on TouchSmart IQ810uk, HELP!

  Can someone out there help, my new touchsmart, which is compatible with the DvD Blue Ray is unable to read or play bule ray DvD, but has no problem when it comes to CD or DvD, it plays perfectly with no hickups, I tried up to from my firmware programs and BD ROM software for playback of the blue ray DVD , but no solutions. its been suggested that I do a oil change of power, upgrade to Windows 7 as windows media supports Blue Ray DVD, I did a complete restore of the system and the only thing I can think is to exchange the BD - Rom drive, but very puzzeled since I was able to read all other formats, I don't think it's a hard drive problems.

  MAY A CLUE THERE!

  Got my BD ROM drivechange and immediately resolve my blue ray player problem, so I suggest get Hp to replace your BD - Rom drive.

• Pavilion 550-110: help adding Blu - Ray desktop player

  I would like to replace the existing DVD drive (tray ultra slim SuperMulti DVD burner) on a Pavilion 550-110 desktop PC with a Blu - ray player.

  The existing unit is mounted vertically in the case. I replaced the DVD drive with a Blu - ray on a HP PC 500-281 player, where it has been mounted horizontally.

  If this same blu - ray player could be reused on the new 550-110?

  If this isn't the case, please suggest a particular (or brand) type of Blu - ray player-player. I used to look first on Amazon.com for this type of product.

  Any help or advice would be appreciated.

  Thank you.

  Hello:

  Please see this related thread... looks like the same configuration.

  http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/HP-Pavilion-Desktop-550-153na-replace-DVD-writer-drive-with/m-p/5362566/highlight/true#M105730

  Now, if the BR drive you have in your 500-281 is a ultra thin (9.5 mm), I imagine that you can use in your new PC.

• Extracting file failed message when download Blu Ray add on for playmemories House? Help!

  Hi I really need help on the above mentioned. Installation of Bluray disc add on to play memories home

  I followed all the steps, but the file does not work

  Get this error message. Extraction of the file has failed. "It is probably cause by a few mΘmoire or the Cabinet damaged.

  I know with certainty that it's not disk space or memory must thus be corrupted CAB file. Any help would be greatly appreciated.

  Hello, Solomon,

  Welcome to the community of Sony.

  This error message can appear if the file has not completely download
  Ensure that you have followed the instructions to download and install the Blu - ray Disc software module from the link below.

  http://support.d-Imaging.Sony.co.jp/BDUW/PMH/us.html#STEP1

  Make sure that the software home PlayMemories that came with the camera is installed.

  The camera is connected to the computer and turned on.

  The computer is connected to the Internet.

  A Blu - ray burner is connected to the computer and turned on.

  If the problem persists, the network connection is perhaps not sufficiently reliable for a large download. You can download the MSI on another computer and copy to the computer you wish to install.

  Or, if you use a laptop, connect you to a more reliable network and try again.

  If the problem persists, you can contact our team of Technical Support on the link below:

  http://eSupport.Sony.com/us/p/support-contacts.pl?mdltype_id=7

  Please mark it as "acceptable Solution" If you find this information useful.

  Kind regards

  Colby

• My optiarc cant BD ROM BC-5500 ATA device read blue ray discs, it can only be read normal CD-ROMs. Please help :(

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Always do a job - even in a first time?  If so, pilots may have been replaced by a Microsoft Update and maybe that's why it doesn't work anymore.  Check the drivers and see if there is an option to restore the drivers to a previous version (which may be supplied with the system when he worked).  If so, try the restore and see if that solves the problem.  Make sure that it not only reads blu ray disks but can read and burn CDs and DVDs as it should.  If not you can always just reinstall the drivers by unscrewing the restore and restore the drivers who were there before you started this effort and again to confirm that it still works except for playing blu ray discs.

  I don't see the point in HP brake a blu ray player that has no driver available for it - I have never actually heard of what happens with a manufacturer or the device installed on the computers they sell.  Someone at HP left dropped the ball big time on this one.  Maybe HP will give you a free exchange to another blu ray player they may have available for your computer making the drivers for it and who actually works like the one bought you is not - it can't hurt to ask.  Check the options first then you can ask to him who is of at least equal quality and is the same price, or maybe a bit more expensive - they can always be arranged because of the problem, they know exists.  I guess that it's still under warranty, so that shouldn't be a problem.  It's an option-, but the decision is yours.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Playing blu - ray movies... the screen turns black. Help!

  My laptop HP dv7 - 4197cl a problem playing blu - ray movies... screen goes black.  When some of the blu ray movies (Green Zone... tried to play 2 drives different blu - ray and "A prophet"), the disc begins to charge to the top and then the screen goes all black.  The disks are new and have no scratches.  Some other blu ray discs will play fine.  I need help.

  I already downloaded the lates bios for my computer and there is no other updates for the HP Media Smart program.  Has anyone else had similar problems?  What can I do else?

  I just downloaded the latest version of HP Media Smart DVD player on HP website and uploaded on my computer.  Once deleted my old program and downloaded the new version, he played very well.  It really sucks that HP did not offer this update on my older version that said that he had no new updates.  Thank you... I had to do this on my own.

• Please help me! I need driver for a6750t blu-ray(lits-on)

  Hello! Guy!

  I need help! Please help me.

  My Hp desktop computer does not recognize the blu - ray drive (ATAPI BD B DH6E2L) since I've upgraded to Windows 7.

  I heard that this problem will be solved if I went back to the old operating system (Vista). but I don't want to go back to the old OS because Vista is too slow.

  Is there anyone who solve this problem or would you please let me know how to get this driver for blu - ray.

  Thank you in advance.

  Thanks DavidPK!

  I tried the solution you have connected, but it did not work. so I clicked on the content of this site.

  I followed the solution here and it worked... Great!

  You are very helpful to solve the problem.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Go to this site! Follow the instructions. Now my Blu - ray works!... the problem is the registry corruption.

  but just be careful when you deal with registry!

  The help link

  Windows 7 or Windows Vista

  1. Click Start
     Collapse this includes this image

• H.26 Blu Ray. Only play on some players, but not all! Help

  I am a wedding videographer and tried to give a couple their latest video for weeks.

  I have created 8 different images of the final video but no luck.  I put the disc in my PS3 and it stutters and freezes and random points.

  I put the disc in another Sony stand-alone player and he did the same thing.  I then put the disc in a Sharp Blu - ray player, and he played without any problems.

  I even tried to use another brand of discs to see if that would fix it but still not.  I tried using dynamic links, then meida encoder for blu ray file and brining the file in again.  Still nothing seems to help.

  I have menus, the motion only I have is music.  They are all menus of stand alone, bound between them (no pop-up)

  The only thing I have not yet tried burning an mpeg instead of h.26 file.  Not sure if this will help.

  Anyone else have any suggestions on how to overcome this problem?  I've never had before.  I did many projects in encore and played very well on the PS3

  But it doesn't seem to matter how much I do versions, or changes I.

  Thank you

  It seems that the creation of the disc in mpeg2 blu ray has solved my problem.  This isn't the Ps3 very easily and quickly read more problems!

• help with blu ray

  Hello

  I'm new on blu ray and would like some info please, I have a project edited with premiere cs4, export, I have 2 choices for blu ray-h264 bluray & mpeg 2-Blu-Ray, what are the main differences. Also will be present also transcode the project ready to be burned in yet? I'm looking for the fastest workflow, as I will be hopefully move to HD for most of my editing.

  other assistance would be good.

  concerning

  Baz

  Is there not a "do not transcode" or do you see it but you can not click on it? (not highlighted)

  If any of these questions should be your trouble, well, Yes, I would try a re-install.

  Not sure you will be able to uninstall yet only, I'm afraid you will have to re - install and first and SOUL... also.

  If it will be your decision follow these steps:

  (1) uninstall

  (2) run the uninstall program Adobe CS4 (sometimes you have to install a program to uninstall windows too, but it will ask you if necessary)

  (3) run the uninstall program Adobe CS4

  (4) performance Adobe CS4 uninstaller (points 3 and 4 are not an error)

  (5) disable all security software you have installed and disconnect from the internet (if you have a few sw relative could be a serious problem)

  (6) run the installation (better if it is full) the admin RIGHTS

  (7) go for dinner with the main actress of the film XDCAM (ops, no, you have to insert more than one disc) (in any way later...)

  (8) install the updates (I prefer download them and install as ADMINISTRATOR).

  Save updates will be useful for future resettlement (crossing fingers)

  I hope that did not fail all

  Ciao

  Giorgio

• . Not legal for blu-ray/dvd DTS! Help, please

  First of all, I would like to thank in advance anyone who can help me solve this problem.  I've been looking through tutorials, google help on this, and nothing helps, I was not able to get .dts to burn to dvd or blu - ray.  I have all my goods in order and when its time to build the project to dvd/blu-ray all him transcode video fine, but it keeps telling me "not legal .dts to blu - ray" or "not legal .dts to dvd" in other words, all videos are in line, not the sound.

  Can someone help me please?  Y at - there a step I'm missing?  Why we say that it is not legal, when documentation indicates that still supports dts?

  Here are my computer specs:

  Card mother MSI 7366

  Vista SP2 x 64-4 G RAM

  (2) burners Panasonic MLT - BD SW 5584 Blu - ray

  Thank you

  Halfpint1210

  Halfpint,

  I used SDRS (mainly based on input from Neil Wilkes in those and other threads) without any problem.

  I export the PrPro Audio such as WMA with all six streams included. AMM have been transported to Audition for any additional changes, then exported hearing as six discrete PCM/WAV files. In the SurCode encoder, I encode to one. CPT and Import_As_Asset file in Encore. This file is then placed on the Timeline as an additional Audio track, which is accessible via a Menu. Most of the set-top will players also this additional Audio track via the Audio button, but not all. I also usually add some instructions on this selection Menu Audio, or as a title at the end of a first Clip to play, so the user knows that there are choices.

  Good luck and attention to all of the comments from Neil Wilkes. There are also a few other discussions on DTS, where Jeff Bellune both Neil Wilkes answered specific questions of mine on the subject. Some of them probably come back before even the previous forum. I have found no, and the little that I found (Google), had links to Adobe. I'm sorry.

  Hunt

• I don't see the Netflix icon to the title of the video in the home menu. My Blu ray model is DBC-E370. Any help?

  I don't see the Netflix icon to the title of the video in the home menu. My Blu ray model is DBC-E370. Any help?

  Hello amrsourani1,

  I recommend you try Sony.net to get help in your area. They would be better equipped to answer questions and concerns you may have with your player. We certainly hope this helps. Have a wonderful day!

• Qosmio-F750-10 q: compatibility of DVD/Blu-ray Disc player to help to win 8

  Since the upgrade to Win7 for Win8 the TOSHIBA DVD/Blu-ray Disc player has compatibility problems. When is an update due please?

  Y at - it a update driver also needed to activate the 3D?

  Thank you

  Hello

  I assume you are using the Win 7 Toshiba DVD/BD drive.
  So I t wonder compatibility issues appears.

  Looks like you will have to wait for the release of Win 8.