Help... economy will not work Lightroom froze... Help

Similar Questions

• I have Lightroom on my iMac and MacBook Air, I just new MacBook Pro, all migrated to Pro air but will not work Lightroom until I have disable it on the Air.  HOW CAN I DO THIS?

  I have Lightroom on my iMac and MacBook Air, I just new MacBook Pro, all migrated to Pro air but will not work Lightroom until I have disable it on the Air.  HOW CAN I DO THIS?

  There is no such thing as disabling Lightroom 5.7. Just uninstall the software.

  Looks like you have installed 6 Lightroom on two of your computers (including the MacBook Air). In this case, you must find and launch Lightroom 6 (not Lightroom 5.7 or any other version of Lightroom 5) on the MacBook Air and then in the menu help, select logout.

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?

  I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• I just updated my iPad and it told me to activate it using my Apple ID. I entered my Apple ID and it will not work. Help please

  I just updated my iPad and it told me to activate it using my Apple ID. I entered my Apple ID and it will not work. Help please

  There seems to be a problem, especially with older devices. And I guess that's the end of Apple since it affects both.

  You can try to use iTunes to restore your device from a backup

  http://support.Apple.com/kb/HT1414

  Or you could wait it out and see if Apple fixes things.

• I have XP and had a virus. I removed the virus, but now the system restore will not work. I tried Safe Mode but clings to the confirm restore point selection. Help

  System Restore will not work

  Hi FriendFriend,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. you receive an error message when running the system restore?

  I suggest that you put the computer in a clean boot state, and then try to clean boot.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then view the event logs to examine the system restore service errors.

  (a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.

  (b) click on the category System .

  (c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  A Beyschau of Annette

  Hello

  Quote: ' MiFi will not work unless plugged in to the computer.

  Where it has been plugged in before?

  If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

  ----------------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I need help download microsoft NET frame model 2.0 on my computer so that my Lexmark 5500 printer will not work correctly.

  I need help download microsoft NET frame model 2.0 on my computer so that my Lexmark 5500 printer will not work correctly.  Please call me at the

  Thank you
  John Robinson

  Original title: hardware device

  The lies of failure with your method of installation of the drivers / software, you install using a Lexmark CD or download from Lexmark support?

  http://support.Lexmark.com/index?ProductCode=LEXMARK_PRO5500&page=product&locale=en&UserLocale=en_US#2

  NB there is also a firmware update

• I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  Thank you more:
  Steve Vidacs /Hungary

  On Monday, November 5, 2012 20:14:15 + 0000, istvanvidacs wrote:

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  You must have installed a Windows 7 64-bit driver (if it exists)
  for this. Do you have? Otherwise, navigate to the web site of the camera
  manufacturer, search, download and install it.

  Ken Blake, Microsoft MVP

• my epson dx4050 will not work or open I use wind 7 now, but it does not work pls help

  my epson dx4050 will not work or open I use wind 7 now, but it does not work pls help

  Because your message was clearly not your comments on the web site of MIcrosft responses, I have he left the comment forum in the forum 'Hardware and drivers' Windows 7.

  When you say it "will not open', do you mean physically or you want to tell the printer object in the printers and devices folder does not open when you double-click it?

  Have you tried to delete the printer and add it again?

  He has already worked?  If so, have you changed between yesterday and today?  The device is supposed to be compatible with Windows 7 and should not need a separate driver, but if you have Windows 7 32 - bit, you can try using the driver on the Epson website.
  http://eSupport.Epson-Europe.com/FileDetails.aspx?LNG=en-GB&data=lkuCfcvA9cw77whFcRdwis4JOQH9mtNd&ID=324678

  How do you connect to the Stylus DX4050?  It is USB, wired network or wireless network?  The documentation says it is USB, but I connected USB printers to the network, then maybe you have as well.

  The more details you provide on your printer and your system, the better people can help you.

• Did not win 10.  I'm back to Win 7, player will not work.  Don't delete and reinstall.  Help please.

  Tried to win 10 and don't like it.  When back to Win 7, Acrobat Reader will not work.  Make me

  "the Acrobat PDF DC browser plug is missing
  Please reinstall Acrobat Reader DC for this problem"

  Also receive "the older version of Acrobat DC cannot be removed" Contact tech support group

  Try to install it becomes: "the network function you are trying to access is unavailable.

  Try to remove and reinstall doesn't work can not remove the old version and it will not reinstall it

  Please help.  Thank you, Scott Boyd [email protected]

  Try to use this tool: Download Adobe Reader and Acrobat tool - Adobe Labs

• Moving project between first CS5 and CS5.5 will not work... Help!

  If all goes well installed CS5.5 sparer dir and tried to import the CS5 project. Well he opened very fast but then he had trouble scouring the project. It seems that CS5.5 dislike some mov files. Maybe som codec problems? The windows monitor will be freezes or the display of 'media pending' forever. On some files mov, *.avi and SB it will allow scrubbing... but very slow. Rendering will not work either when it comes to some problem files, it will stop making and ending with the creation of crash. I tried to create a new empty project to 5.5 and just imported these "problem files", but then it works very well with the washing and rendering. There is no open problem the project in CS5.03, everything works perfectly there. So what I did? Yes, I backed up my c: drive and formatted, it... 28 hours later I installed everything nice and fresh with only the CS5.5 version on my drive. That worked better? N° !!! the same problem. After another 15 hours of trial and error, I got my "blessed of God" has registered C:disk. As far as I understand that this problem seems to be a problem with 5.5 and not my setup of the computer with codecs etc.? If there is someone out there who can help me?

  Thank you

  Inteli7 975extreme @4. 2 GHz

  Adaptec 5805 in raid 5

  1x300GB Velociraptor for Win7 ultimate

  4x300GB Velociraptor for scratch in raid 5 disk

  ZOTAC GTX480

  UAD-pci card

  Corsair TX 750W power supply

  22 '' dual monitors

  It seems that CS5.5 dislike some mov files.

  It is indeed true.  Adobe is aware of the problem and working on a fix.

• I have windows xp I deleted rundll32.exe now my windows will not work please help.

  I have windows xp. I some how deleted rundll32.exe now my windows will not work or open. system restore not working anymore.

  http://www.computing.NET/answers/Windows-XP/deleted-rundll32exe/168958.html

• Lightroom will not work on the computer after payment has failed and the new mode of payment put in.

  Adobe will not work.  Lightroom need to work.  Tried to uninstall Lightroom and creative cloud, they stopped working when my payment failed.  After putting in the new mode of payment that they still do not work.  Now don't reinstall it on mac 10.10.5 after several attempts and reboots.  Also, if anyone knows a phone number for adobe support.  I tried to find one, but it just shows that I have are not eligible for phone support... I pay for a product, I can call someone!

  allow a day of pst for your payment to process.  It is currently Saturday am pst.

  then check your account to see if it's what you expect.

  Otherwise, contact adobe support during the time pst by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  If it shows your subscription is current, Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• Hi everyone, I have a downloaded version of Lightroom 5 (not the online version) and my tool bar to the right will not work. I can do everything but tools toolbar won't make any changes in the photos.

  Hi everyone, I have a downloaded version of Lightroom 5 (not the web-based version) and my tool bar to the right will not work. I can do everything but tools toolbar won't make any changes in the photos.

  Help is appreciated.

  Have a great day,

  Omar

  Hi Omar,.

  Could if it you please let me know are you not capable of working in the develop Module?

  Or is the Panel on the right in gray?

  Also could you please attach a screenshot.

  Kind regards

  Tanuj