Help FMIS - first installation

Similar Questions

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• OfficeJet Pro 8610: First installation Officejet pro 8610/storage

  Hello

  I turned on the printer to set up as a printer of replacement for when the usual distribution. I was hoping that I wouldn't need to install the ink cartridges, so I plugged into the power supply. Now, he tells me that I can not disable the printer because it can damage it. But if I don't printhead for a long period (over 6 months) the ink can dry and must eventually be replaced and which has a very high cost. So is it safe to keep the printer stored for more than 6 months with the installed ink cartridges and the ink will not obstruct Chief? Or can I turn the printer off without completing the first installation of the printer?

  Thank you

  Hello @nmc1987,

  It is a great place to get help! I read your post and you want to know if you need complete installation, even if you are not using the printer for 6 months. I want to help you solve this problem.

  My personal recommendation would be to close to the bottom of the printer, and when you are ready to use the printer, then insert the cartridges.

  If you went ahead and set up the printer, you can store the cartridges and print heads by following this document: storage open cartridges and printheads.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now

  Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now and the best advice seems to apply to CC 2014 and has to do with installoing a previous version (CS6) of the Prime Minister - but seems not to apply to the CC 2015... HELP - I have plans to burn and don't want to go to third-party software (if I do I'll ditch CC because it won't let me complete my work on a DVD!) @.

  Hi Matt,

  I found this link corresponding to your query, please see if it helps: CS6 still not installed with creative cloud

  Kind regards
  Rahul

• Strange first installation problem

  I looked around the answer to that, but nothing helped.

  During my first installation of Windows 7 on the merger, he installed the language of the operating system by default as Turkish, but I noticed that I could drag and drop my Mac on fusion - so almost there, just get installed it in a language I understand.

  I deleted this virtual machine and created another, this time I installed it manually, I don't check the options early in the process, he asked me the usual Windows Installer issues and I choose English as my language.

  After that he had installed it, I noticed I couldn't drag dop points in the instance of merge, then I remembered when he installed inadvertently Turkish, and I checked the options at the beginning of the process, you have a few options of merging the files between the Mac and virtual machine management.

  So now I've manged to install Windows properly, how can I do so I can drag and drop files?

  Also I noticed in the first installation, when I changed the size of the screen he filled my Mac screen beautifully - as if the resolution of the screen had been properly defined. Now, he looks terrible in 800 x 600.

  I am now a little confused.

  If someone could help me? :-)

  Chris

  Hello

  You must install "VMware Tools" to get the drag and drop and beautiful screen resizing back. The first time you have installed (the Turkish era), it was a 'Easy Install', which automatically installs the tools.

  When you do your VM Win7 the second time, it was a plant 'Manual', which does not automatically install the tools.

  During the merger and your Machine virtual (VM) are running, you can install the tools by selecting "Install VMware Tools" in the section "Virtual Machine" on the Mac.

  It should work - let us know if not.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  @cinziac (who has not declared his complete version of Windows):

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• ERROR:-1603 FATAL INSTALLATION ERROR. Consult the help of Windows Installer (Msi.chm) or MSDN for more information.

  I try to install the Microsoft Flight Simulator X game
  but I get the error message
  "ERROR:-1603 FATAL INSTALLATION ERROR.
  Get help with Windows Installer (Msi.chm) or MSDN
  For more information. »
  Can someone help me on this? I am using Windows XP Pro.

  Hello

  Can I know the computer brand and model?

  I suggest you follow these methods and check.

  Method 1: has access the below link and follow the steps mentioned and check.

  You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package

  http://support.Microsoft.com/kb/834484

  Method 2: Refer to the following article and try the steps.

  Error message when you install a Microsoft game or a mapping program http://support.Microsoft.com/kb/258496

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps!

• Need help with the installation of the WebWorks tools order

  Hello world.

  Brand-newbie to your Forum and the development for the Playbook.

  Developed software and Web, mainly as a hobby for about 15 years and more. A number of associates
  and friends have Playbooks now, so I think trying my hand to redevelop some of my
  old software for the platform of the Playbook. I plan to just using WebWorks for now.

  What I would appreciate, is some clarification as to the order of installation of the tools.
  I have already installed ripple chrome just to get a peek at a few examples.
  The ' tools' section to WebWorks watch ripple as the first installation, but I do know that I read somewhere
  in the Forum that WebWorks should be installed "before" ripple. And if the ripple is already installed.
  It must be uninstalled before installing WebWorks because of potential conflicts.

  So is this the correct installation order?

  (Installation on Win 7 64-bit.)

  1. install the SDK WebWorks
  2. install VMWare Player
  3. install the ripple

  I also remember reading a thread where some mentioned problems of compatibility with the 64-bit version of Java.
  This box is running Java 7.0.90 - 64 bit.

  And finally, for the moment at least, what additional script libraries are the "must have".

  Thanks in advance.

  For anyone else looking for a similar response, check out:

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/installing-WebWorks-Tablet-devel...

  By the same user.

• CC will not be listed first installation after that first install would not complete the installation.

  Stopped first installation to 24%, I stopped the installation now first does not appear as an installation but CC said I installed it. I tried to uninstall the first cc and the control panel. All say, "Uninstallation was successful", yet control panel Uninstall programs listing show even the first as an application active and CC does not list the first for me to download. What now?

  Problem solved the representative of Adobe technical support had me download the cleaning tool. That solved the problem.

• hp2544 need help on the installation of the first.

  I just buy a 2544 I bought it because of the impression of ipdad capabilities.

  The thing is that I have also recommended my sister bought one and it does not have a laptop or PC. She lives 100 miles so sharing mine is not an option. She bought his first and he's now sitting in the waiting area for me to tell how to install it on its network. She has a hub of sky.

  I searched and can't find any instructions can anyone help please?

  Hi spanisheyes.

  Welcome to the HP Forums!

  I understand that you need help setting up your HP Deskjet 2544 to your iPad, and I'm happy to help with this problem!

  Please take a look through these two guides:

  • Printing from an Apple or a Mobile Android with HP Direct wireless device.
  • Impression on a wireless network with Apple AirPrint FAQs.

  Hope this helps, and hope to hear from you!

• The first installation help

  I'm having a problem with starting my software on Vista 64.  I downloaded from the creative cloud with no problems, but when I go to open it, it gives me a msg error saying missing a .dll file, I contacted Adobe and said to install the .dll file that I did but I still get the same error.  I need help serioud because I really need this program to work, and it is the only one of the adobe programs that I have installed that has not worked for me.  Help, please. Thank you

  Download and install the appropriate Microsoft Visual C++ 2010 Redistributable Package http://www.microsoft.com/en-us/download/details.aspx?id=26999

  Check if it helps.

  Post edited by: Arpit Kapoor

• Need help with the installation of Windows XP Home on my Satellite Pro A300-1DZ

  Hi all.

  I have a Satellite Pro A300-1DZ system unit, model no PSAG1E-OOFOO4EN (think they are 'o' and not '0', circle with slash through it) with WXP Pro.

  I recently contracted a virus inside and as he removed, however it is not good so I want to re - install Windows XP Home edition. I backed up the computer, I have a Windows XP Home SP2 Pro edition disk and I have my product key.
  I put the CD/DVD in BIOS to run 1 drive and tells me that I can boot from the CD, I press a button and it loads the CD, select the option where to install windows.

  BUT! I can t go further than what windows does not detect the HD said he s not now, or whatever.

  My question is this: Please can someone me step by step instructions on how to reinstall XP and a link to all the drivers I need to make it work?

  PLEEASE!

  It's simple on my PC, also, please keep in mind, I am best suited for working on cars, I'm not stupid, but my calloused hands search for computers a little more difficult than Motors please not in many computer technical terms.
  I myself am the slow education in the dark arts of computers. LOL :)

  PS. the laptop has a Vista Basic sticker on it, but it is certainly the XP pro operating system. :)

  Hi jeff

  Here's your solution:
  1. go to bios with F2 when you see the toshiba start screen.
  2. Select the arrow to the left using the "Advanced".
  3 press down until you get to "SATA Controller Mode".
  4 change, using F7/F8, Chang [AHCI] setting [compatibility].
  5. make sure the CD/DVD drive is the first to start and F10 save and exit. computer restart when you are prompted to "press any key" press a button and hey presto as before windows will start the installation, but this time you won't get windows you said:

  Set up did not find Ant hard disks installed on your computer.

  Make sure any drive HARD are powered on and properly connected to your computer and any hard disk related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program.

  implementation cannot continue press f3 to goto hell... uh I mean leaving the installation

  And you can continue on your installation of Windows XP Home edition.

  Hope I helped many other jeff's in the same boat. XD

• The first Installation fails after first Boot of the Satellite L750

  Hello.

  I turned on my brand-new Satellite L750 - 04K 010 for the first time tonight (bought new) and start going through the initial setup process for Windows 7 Home Premium. The installation must "Installing devices" and then hung up without activity for about 2 hours, how I decided to restart.

  Then I kept getting the error windows installation has failed and would then need to restart the installation process. The computer will restart but kept coming up with the same error and the loop would continue even once.

  I have not received the installation discs.

  I tried to press F8 to see if the computer repair would work but only gave options to repair the system to a previous state. No Toshiba option was available.

  Help!

  Thanking you in advance,

  Greg

  It's pretty stupid situation now.
  If there is no way to launch the installation of recovery once again I recommend your dealer and ask for help. With other words, ask for the replacement of the laptop.

  What you can also do is to contact the nearest Toshiba service provider and explain the situation. I put t know what they can do for you, but I imagine that you will get a DVD of recovery for the installation of the OS.

  Of course I n don't know what the right solution, but I don't see another option for you.

• Satellite L500-1ZR - battery died during the first installation

  Hello

  I really hope someone can help me.

  During the first time I started my new Toshiba Satellite L500-1ZR battery died and my laptop turns off. I was in the middle of the installation and now when I start it, it gives a word of warning: "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation. "However, when I click OK it restarts and I find myself the exact same caveat. I tried F2 and F12 to see if he had options to do a startup repair and also I inserted a disc on which I downloaded a hardware configuration, but it won't work.

  Anyone got some ideas on how to solve this problem?

  Thanks in advance.

  Hi belisu,

  The advanced boot menu, you can access via the F8 key before Windows starts.
  With the F2 and F12 button, you can access the BIOS menu and start.

  So try to use the F8 key to access the Windows Advanced Boot menu and try to start the Windows repair option. It starts from Toshiba HARD drive recovery and restore settings factory.

  Good luck! :)