Strange first installation problem

Similar Questions

• CS6 of first installation problem

  I just tried to install CS6 first on a system with existing first CS5 - meet all of the minimum requirements.  I also installed After Effects without any problem.  The installer gave me 24 no fatal errors - for most temporary files it could not remove.  The installer now shows that first CS6 is on my computer, but it isn't here.  I have a few folders for first CS6 family and that it appears in my control panel, under programs installed, but I can't find it in the start menu or even in the program folder (there is a Windows-based computer running Windows 7), 8 GB of memory, and a high-end of the GeForce, Intel quad-4 processor card.  Can I uninstall by using the control panel and try a reinstall?

  Updated - I uninstalled first CS6 and tried again - always get the following errors:

  Exit code: 6

  Please see specific errors below for troubleshooting. For example, ERROR: DF024, DF059, D...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 5 (s)

  -Payload: Adobe Player for the x 64 coating 3.3 3.3.0.0 {9254D539-549A-41DD-A7DA-251766F2B76F}.

  ERROR: DF024: impossible to preserve the original to "C:\Program Files\Fichiers Files\Adobe\APE\3.3\adbeapecore.dll" error 32 the process cannot access the file because it is being used by another process. (Seq 2)

  -Payload: DynamiclinkSupport 6.0.0.0 {DE88AA40-6766-43D3-A755-8FC374B3D2C3}.

  ERROR: DF024: unable to preserve the original file to "C:\Program Files (x 86) \Common ' error 32 the process cannot access the file because it is being used by another process. (Seq 1)

  -Payload: Adobe standard 2.0 2.0.0.0 {CFA46C39-C539-4BE9-9364-495003C714AD}.

  ERROR: DF024: unable to preserve the original file to "C:\Program Files (x 86) \Common ' error 32 the process cannot access the file because it is being used by another process. (Seq 13)

  ERROR: DW063: ARKDeleteFileCommand of command failed. (Seq 13)

  ERROR: DF059: ARKServiceControl::StartService could not start the service standard. Error: 1053 (Seq 1)

  -------------------------------------------------------------------------------------

  However, the Manager shows here are optional components - still can't find the first CS6 - that's all just not on my system!

  Palm harbor please make sure that you don't have any Adobe Creative Applications running during installation.  DW063 and DF024 errors may also be indications of problems of file permissions.  If you have closed all Adobe Creative applications, but continue to receive the same mistakes and then follow the steps listed in the error 'Output 6' or ' exit 7 "|"» Install log | Read, write, file system errors. CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html to change the permissions of the file.

  Also, you will want to view the installation log in its entirety to determine the location where you get DF024/DW063 errors.  Please see the problems with the Setup logs. CS5.5, CS5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to locate and interpret the installation log files.

• Strange Adobe installation problem

  I'm on a updated version of Windows 7 x 64, with fully implemented Firefox browser up-to-date.

  Firefox V.34.0.5

  I have download Adobe update to Adobe only, once the completed DL I leave and run as admin, I tried it without Admin as well.

  It opens and at that time there it just sits on the screen.

  I took a SS of this screen, on which he sits, and yes I left sitting for hours on end hoping he would come back to reward my patience, and is not

  

  It's very frustrating, what should I do?

  Thanks in advance for any help offered that I greatly appreciate it.

  PS: I even tried running CCleaner Pro and restart in safe mode with network and run the installation program and I got the same results, an empty window grey Installer.

  Please try the installer in offline mode:

  Internet Explorer:

  http://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/Install_flash_player_ax.exe

  Firefox and other NPAPI browsers:

  http://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/install_flash_player.exe

• First installation problem 10

  I tried to install the first 10 but received a message that it could not install becauseCS5 (Bridge.exe) was running even if I never turned on the program. The path of the file for bridge start inside Menu, meanit is running in the background? If so, how can I disable it so I can install the first 10?

  Press Ctrl + Alt + Delete

  Then start the Task Manager.

  Select the bridge under the processes tab, then click on end process.

  

• OfficeJet Pro 8610: First installation Officejet pro 8610/storage

  Hello

  I turned on the printer to set up as a printer of replacement for when the usual distribution. I was hoping that I wouldn't need to install the ink cartridges, so I plugged into the power supply. Now, he tells me that I can not disable the printer because it can damage it. But if I don't printhead for a long period (over 6 months) the ink can dry and must eventually be replaced and which has a very high cost. So is it safe to keep the printer stored for more than 6 months with the installed ink cartridges and the ink will not obstruct Chief? Or can I turn the printer off without completing the first installation of the printer?

  Thank you

  Hello @nmc1987,

  It is a great place to get help! I read your post and you want to know if you need complete installation, even if you are not using the printer for 6 months. I want to help you solve this problem.

  My personal recommendation would be to close to the bottom of the printer, and when you are ready to use the printer, then insert the cartridges.

  If you went ahead and set up the printer, you can store the cartridges and print heads by following this document: storage open cartridges and printheads.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• FIRST Installation of LabVIEW for robotics 2010?

  
  

  Hi mat3049,

  Could you please after that on the forums of Discussion FIRST located at ni.com/first?  These forums are monitored actively by people involved in the FIRST.  They will be better able to help you with this installation problem.

• Installation problems Thrones and Patriots

  Hey everybody. I have installation problems with elevation of the thrones of nations with the Patriots. I installed rise of nations but the installation successfully Thrones and Patriots he wins in a file called CTW_New_World_Map_01_info_text.xml.18 and then says check to see if I have available disk space, or if the file is in use. It's a brand new model with no other games on it.

  Hi Riseofjohn,
   
  1. have you checked the disk installation for scratches or damage?
  2. don't you try to install the game in the other computer?
  3. What is the operating system that is currently installed on your computer?
   
  First of all I suggest to perform a disk cleanup and check whether the problem is resolved.
   
  The disk cleanup tool helps you free up space on your hard disk to improve your computer's performance. The tool identifies files that you can safely remove, and then allows you to choose if you want to remove some or all of the files identified.
  
  To use disk cleanup in Windows 7 follow these steps below.
   
  a. Click Start, click programs, accessories principally made, click System Tools and then click on disk cleanup. If several readers are available, you may be asked to specify which drive you want to clean.
  b. when disk cleanup has calculated how much space you can free of charge, in the dialog cleaning disc, scroll through the content of the files to delete list.
   
  

  Disk Cleanup dialog box

  c. clear the check boxes for files that you do not want to delete, and then click OK.

  For more options, such as cleaning of system restore and files copy of Shadow, under Description, click on clean up the system files, and then click the other Options tab.
  d. When you are prompted to confirm that you want to remove the files specified, click Yes.
   
  After a few minutes, the process is completed, and close the Disk Cleanup dialog box, leaving your computer more efficient and clean better.
   
  I also suggest you to run chkdsk.
  Follow these steps:
   
  a. click on start
  b. Type "cmd" in the start search box
  c. right-click on cmd.exe list programs and then select the run as Administrator option. If you are prompted for an administrator password or for confirmation, type your password, or click on continue
  d. in the command prompt window, type the following command and press enter Chkdsk/r X:
   Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.
  a. press y when you are prompted to check the drive the next time the system restarts.
  b. close all applications and restart the computer.
   
  Note: upon reboot, Windows checks the drive for errors, and then Windows starts
  
  After the computer restarts, repeat steps 1 through 4 for the other volume and then check if the disk cleanup works.
   
  If the steps provided above does not resolve the problem then I suggest to install the game using the cleanboot and check for the issue.
  Put your system to the clean boot state helps determine if third-party applications or startup items
  the origin of the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and re-
  install the program.
  See KB Microsoft article below for more information on how to resolve a problem by doing a
  clean boot in Windows Vista or Windows 7:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135  
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above KB
  article.
  I suggest also allows you to check the compatibility of the game with the Windows 7 operating system.

   

  To do this, you can visit this link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/         

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• The disk set installation problem

  Dell optiplex gx620 series

  1 GB of ram

  3 ghz processor

  I have new Dell brand pc but whenever I tried to install games on cd or dvd first installation works fine but after a while he gives crc error (file does not match configuration files means data.cab as files) and also when I want to extract the files from password protected, software does not accept the correct password and see the message transmit is wrong.please tell me about my problem

  The two may or may not be related.  This machine is quite old and according to the form factor and the capacitor may have developed types of known issues.

  Could be a dying hard disk, CD/DVD player or bad memory dying.  May be a dying mother (goes back to the capacitor types / form thing factor that I mentioned.)  Maybe just a bad cable on the above part of the drive to the motherboard - well that no chances.  Might even be supply problems.

  So you need to check the following items.

  Open the case and check the capacitors are easy - are they rounded on top?

  Everything back up and run hard drive tests (CTRL + ALT + D, at the start of the machine is a Dell built-in test for readers.)  Best thing would be to find the manufacturer of real player and download, burn, and launch their drive diagnostic).

  There are several memory tests.  Run one of the people.

  The rest is harder for you to test.  I can say that if it costs anything more than US $50 to fix - better get a new machine.

• Win 7 64 bit installation problem

  Hi, okay so I have a dell inspiron with windows vista 32 bit and I am trying to install windows 7 64 bit, I followed all the instructions and everything works fine until it gets to finish install, after the first reset itstarts completing installation and then I get a blue screen with the 0x000007e error code. I tried to remove ram and installation with only 2 GB, I downloaded a new startup of windows 7 on a flash drive to see if the drive has been courrpt but I got the same error, I also tried to projecting my drive hard and still no luck. Any ideas?

  Thanks in advance,

  Nathan

  Hello

  Check the BIOS settings and change the SATA AHCI option and check. Consult the computer manual or contact their support site.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can read these articles and check if it helps:

   

  Windows 7 installation problem: hard drive not found

  http://Windows.Microsoft.com/is-is/Windows7/Windows-7-installation-problem-hard-drive-not-found

   

  Windows 7 installation problems: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-installation-problems-frequently-asked-questions

  You can also check this thread that resembles the similar issue that you are facing:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/0x0000007E-during-installation-of-Windows-7-Pro/65d83a65-5173-4b60-97F5-ff3e2e315b90

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• PHOTOSMART AIO C309a PRINTER installation problems

  Hello. First, I installed theC309 with the cd that had top windows7. and hp solution Center isn't open might 14.1. Did a new install of HP web site with 32-bit windows driver software 7 that everything was great, even the center of solution a few days later, when I tried to sweep the center of solution would not open again with the same message on installation is not complete. He invites you to plug usb, but if you do that you lose your wireless connection and the solution Center does not always open.

  I was on the page of AMAZON review for HP printers and saw so many people frustrated with installation problems. The printers that you have always been for me, but I spent way too much time with their installation lately there is any real help out there / I tried all the patches and updates to your web site.

  Hello, I had the network utility, but not the scan utility so I tried and it seems to have solved the problem of the question. The HP Solutions Center now works and gives an assessment of own health with the exception of a few problems of façade YOU THANKED me.

• CC will not be listed first installation after that first install would not complete the installation.

  Stopped first installation to 24%, I stopped the installation now first does not appear as an installation but CC said I installed it. I tried to uninstall the first cc and the control panel. All say, "Uninstallation was successful", yet control panel Uninstall programs listing show even the first as an application active and CC does not list the first for me to download. What now?

  Problem solved the representative of Adobe technical support had me download the cleaning tool. That solved the problem.

• Options to upgrade to internal hard drive on laptop computer dv2000t (installation problems)

  I need to replace a failed hard drive in my laptop dv2000t of 2006.  The drive I'm replacing was already a replacement car from the original 80 GB drive came with the laptop.  The first replacement 3 years ago (2008) was a 200 GB drive, which worked well for about 3 years.  But he just crashed (apparently).  I received warnings of imminent failure in 'Smart' car a week before, and then it finally is more start.  Subsequent tests on the extract disk show it as having failed in many sectors.

  I had no problem to order a spare for the first time in 2008, restore a backup image to original disk Acronis, installation, etc.  Everything went well in 2008.   So I assumed that all would be gone smoothly for yet another replacement and upgrade.

  In 2008, the drive I ordered was a W.D. (Western Digital, stick with the same brand as the original) disk SATA 2.5 inch 5400 RPM (200 GB).  It's a SATA (I) (1.5 Gbit/s interface).

  The first disc I ordered recently (March 2011) was a W.D 2.5 inch SATA II (3.0 Gbps interface) 500 GB 7200 RPM (from 'Black Scorpion' line of W.D.).   Got the disc image disc to it and she came to the laptop.  Unfortunately, at the start and after the screen BIOS, all I get is a black screen with a white cursor blinking fast at the top of the screen.  Apparently by car is not recognized by the computer?  Then I did some reading in some online forums and found some references on this laptop is made not with the capacity of disks more or 320 GB with 7200 RPM drives (because they're hotter than 5400 drives).  And finally, references to the SATA interface speed.  I ordered a 2nd drive, W.D "Scorpio Blue" line, this time above a 5400 RPM 320 GB drive (but still SATA II).  Same story, still does not work.  So I decided that maybe the question was the SATA speed.  So I found someone who still had a SATA plus old (1.5 Gbps) W.D. drive in stock.  It's a W.D. SATA 250 GB (no longer manufactured).  It should arrive in a few days - and I hope this one works!

  I would like to get some sort of confirmation on the white flashing cursor on the black screen at startup.  Is this typicalif the system could not find a bootable hard drive?  Also, is this SATA or SATA-II issue a probable cause of my problem?   I'm sure that there is nothing wrong with the new drives themselves and images restored on them, as readers will be installed them and available when I plug them in as external drives on my other computer.

  I was able to solve my hard drive installation problems.  It turns out that there is no problem with any of these new replacement discs, I ordered (thinking I had ordered some readers with the wrong specs).  It was a simple solution to the problem.  Restored readers were not start because there is no MBR (Master Boot Record) on the disks after restoring from disk images.

  I use Acronis True Image Home 2011 as my (backup) disk imaging software.  And I just did not understand how to restore properly backed up images on a new hard drive.  I had done everything right except that I had not checked the box to 'restore the MBR' - both do not understand what it was or what it means.  Once I checked this box and reimagee the new drive, it worked fine.

• Office Jet 100 portable printer: HP Officejet 100 portable printer installation problem

  While it is installed via Bluetooth or USB I keep having issues get past requirements.  A notification appears, and says the only computer lacks the necessary USB software support. Installation of software on Lenovo Thinkpad Ultrabook. Model T460s thank you in advance for any help.

  Hello

  If you use the original CD, don't forget to download and run the latest software first installation:

  http://ftp.HP.com/pub/softlib/software12/COL36711/bi-90383-4/OJ100ML411_Full_14_en.exe

  Then, follow these steps to install the software you:
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• I deleted two e-mail accounts in my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• Toshiba G450 - Wellphone Xt installation problems

  WellPhone Xt installation problems

  Great and thank you very much!

  Maybe it could be useful for other people who are looking for such a solution.