HELP for the string with the value of waste

Similar Questions

• When you use a left and right axis, how to choose what issed axis for the value of y GetGraphCursor?

  I use a graph with a left and right axis (2 data sets).  I try to use a slider to select a point in time (x) and the values of y in the two sets of data.  I can't understand how the control, the value that is returned for the value is when you use the GetGraphCursor call.

  GetGraphCursor (panelHandle, PANEL_GRAPH, yourCursorNumber, & x & y)

  Using SetCursorAttribute with the attribute ATTR_CURSOR_YAXIS must be what you are looking for. The online help for this attribute explains wery well:

  Description: Used to change the y-axis which is associated with the bar graph.
  When a graphics cursor is created, the Y axis with which it is associated is determined by the value of ATTR_ACTIVE_YAXIS.  Subsequently, the association can be changed using ATTR_CURSOR_YAXIS.
  The y-axis associate serves as reference for the coordinates of the cursor position in calls to SetGraphCursor and GetGraphCursor.

• There is no help for the usrp blocks screens

  For power, where are the docs for help for the USRP & USRP related blocks (host side & lvfpga blocks)? Help is dimmed in the menus. If they came with the driver, they should be grouped in with something not obvious & has not installed. Where are they?

  BTW, I use NU-USRP 15.00.

  Thank you.

  apchar,

  Try to use context-sensitive help on the pilot of the USRP RIO screw Either click on the "?" in the upper right corner of the block diagram, or press Ctrl-H and hover over the screws of RIO USRP. You should see the additional help documentation.

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to install a local help for the tools of cmd.exe and command line on Windows 7?

  Hello

  for many applications, the command line (cmd.exe) is a good choice to get results with minimum effort. The shell has continuously been improved over the years, at least until Windows XP.

  All the command line tools have a short help screen (using the /? option). When you need more information, you use Windows system for example from the Explorer Help. It is very good.

  Now, Windows XP Help content was installed on site, and the operating system. In Windows 7, my computer wants to go to the Microsoft web site on the internet and there is no local help available. The operating system seems to be incomplete. This makes the help system unusable on a computer without internet access or when the server is not accessible.

  So my question is: is it possible to install a local copy of help for the tools of cmd.exe and command line under Windows 7 or do we have to go back to Windows XP?

  Thank you

  Martin

  Download it directly from Microsoft - Windows Command Reference

• Where can I find help for the companion of XBox Music App, App for video, or for games of XBox Live?

  Where can I find help for the companion of XBox Music App, App for video, or for games of XBox Live?

  You can find the sites of support for these applications at the following locations:

  Music App support:

  App video support

  Xbox companion support

  Support Xbox Live games:

• I need help for the creation of rules - the very high values!

  Hello
  
  I have some troubleshooting by creating rules to HFM 11.1.1.3. I declarate a table where an account data are stored. There should be a stored digital data in another account of HFM (e.g. "EB_MITTEL"). The stored data are much higher than the value in the logfile ('write2File") showed. If I divide this value by 100000000000000 so good value.
  
  Example: The value in the log file: 16492,8691588785 (',' = the decimal delimiter)
  Value in the data grid: 164.928.691.588.785 ("'. ' separator = of thousands")
  
  Part of the rule file:
  
  Void
  
  Dim lMittelWert, lMaxWert, lMinWert
  
  lMittelWert = 0
  lMaxWert = 0
  lMinWert = 0
  a = 0
  For x = 1 to 13
  
  If arListe (x) <>0 then
  lMittelWert = lMittelWert + arListe (x)
  a = a + 1
  End if
  
  If lMaxWert < arListe (x) then
  lMaxWert = arListe (x)
  End If
  
  If x = 1 then
  lMinWert = arListe (x)
  End if
  
  Next
  
  lMinWert = lMaxWert
  
  For x = 1 to 13
  
  If lMinWert > arListe (x) and arListe (x) <>0 then
  lMinWert = arListe (x)
  End If
  write2file arListe (x)
  Next
  If <>0 then
  lMittelWert = lMittelWert / a
  End if
  KSM Exp ' a #EB_MITTEL.» ' C1 # "& C1Item &"="& lMittelWert
  KSM Exp ' a #EB_MIN. C1 # "& C1Item &"="& lMinWert
  KSM Exp ' a #EB_MAX. C1 # "& C1Item &"="& lMaxWert
  End Sub
  
  
  
  I hope someone can help me, thanks in advance. (and I'm so sorry for my bad English)
  
  Jürgen

  VB script using string to convert numbers in some languages require special attention during the handling of numbers. (French, German and other who use commas as the decimal separator).

  Internally, HFM VB Scripts use periods (.) as the decimal separator. One solution is to force the use of decimals and force the script engine to use decimal numbers by declaring the local to be English in the United States with:

  b = setLocale("en-us")

• Need help for the conversion of the nested loops to use the stream

  I'm trying to teach me how to effectively use the java stream, but finds it difficult to find the correct syntax for a problem of nested loop. I would like to convert the following code to use the Java 8 stream instead of nested loops.  Can anyone provide an example or a solution?

   /**
       * Return all members of stringListOne that begin with any of the strings in
       * stringListTwo
       *
       * @return all members of stringListOne that begin with any of the strings in
       * stringListTwo
       */
      Set<String> getFilteredStrings(Set<String> stringListOne, Set<String> stringListTwo) {
       
        Set<String> stringListOneFiltered = new HashSet<String>();
        for (String next : stringListOne) {
              for (String nextPrefix : stringListTwo) {
                  if (next.startsWith(nextPrefix)) {
                      stringListOneFiltered.add(next);
                  }
              }
          }
          return stringListOneFiltered;
      }
  

  Here's a test case for the above code:

  /**
       * Test method for {@link scratchpad.MyClass#getFilteredStrings(java.util.Set, java.util.Set)}.
       */
      @Test
      public final void testGetFilteredStrings() {
  
          MyClass uut = new MyClass();
          
          Set<String> stringListOne = new HashSet<String>();
          stringListOne.add("until");
          stringListOne.add("unite");
          stringListOne.add("under");
          stringListOne.add("prepare");
          stringListOne.add("pretend");
          stringListOne.add("prefix");
          stringListOne.add("prepend");
          stringListOne.add("post");
          stringListOne.add("positive");
          stringListOne.add("postgame");
          stringListOne.add("postpone");       
          
          Set<String> stringListTwo = new HashSet<String>();
          stringListTwo.add("post");
          stringListTwo.add("pre");
          stringListTwo.add("und");
          
          
          Set<String> result= uut.getFilteredStrings(stringListOne, stringListTwo);
          
          System.out.println(result);
          assertEquals(8, result.size());
      }
  

  Thanks for any help you can provide!  I get the hang of using the course of water, but this particular code was difficult.

  tmbc

  I found the following solution to my question:

  GetFilteredStrings (Set stringListOne, the value

  {Set stringListTwo)

  Predicate startsWith = p-> stringListTwo.stream () .anyMatch (prefix-> p.startsWith (prefix));

  Return stringListOne.stream () .filter (startsWith) .collect (Collectors.toSet ());

  }

• Help update the values to modify files on Excel sheet

  I have an excel sheet containing a list of values that need to be updated daily. Cells that have values are related to certain cells in a separate file. The problem is that the file that gets my excel sheet is constantly updated values of as well as the file name. I want to create a macro that will be able to grab the values from the new file and update the spreadsheet I have. I tried to create a macro when you type the name of the file you want to the linked cells to, and she copy that and replace a formula that is already defined, so I'll be able to get new values. I'll show you an example below.

  Front of Macro

  Enter the name of the file: 12345

  (Part 1): = 'S:\MATERIALS\RAW matiere\ [135.xlsx] PURCHASE! $D $11

  During the Macro

  Enter the name of the file: 12345

  (Part 1): = 'S:\MATERIALS\RAW matiere\ [12345.xlsx] PURCHASE! $D $11

  (replaced the file name 135 with 12345)

  When I did that it worked, but my problem is that whenever I entered a new file name so that it is updated (for example 987), the cell would just update with the file I recorded the macro with (12345).

  If someone has a code VBA or other suggestions, I would really appreciate it! If you need me to explain more about this, feel free to let me know. Thank you

  The command of VBA macro to set the formula in a cell is:

  Range ("a6"). Formula = "= 1 + 1.

  
  This would create cell A6 of the formula "1 + 1 =", and the cell afficheraient a 2 it.

  Here is a full function VBA, you can use and customize.  Simply paste in your VBA Editor to use.  You can see the string which is the formula is to break with the prompting text in the middle.

  Void macroFunctionName()
  As Variant Dim promptText
  promptText = InputBox ("What number to the file name?", "Type number please")

  Range ("a6"). Formula = "='S:\MATERIALS\RAW matiere\ ["promptText & ".xlsx] PURCHASE '! $$D 11 "
  End Sub

• Need help for the conversion of the Date

  Hi all

  Your expert input is much appreciated.

  Have a problem where it is my master table structure, whenever there is an update/delete/insert on the main table
  There's a trigger that insert an entry in the Audit table.
  
  SQL > cpp_Master Desc;
  Number of Ent_id
  Date of Ent_date
  
  SQL > Desc Cpp_Master_Audit
  Number of Ent_id
  Date of Ent_date,
  Insert_type varchar2 (1)
  
  The problem is that when we insert the Sub record in the table, the ent_date column appears in this way.
  
  SQL > INSERT INTO CED.cpp_Master (ENT_ID, Ent_date)
  VALUES (6030902, TO_DATE (1 JANUARY 01 00:00:00 ', ' HH24: PUT DD/MM/YYYY "));

  SQL > SELECT * FROM CED.cpp_Master;

  6030902 01/01/0001

  SQL > SELECT * FROM CDS. Cpp_Master_Audit;

  6030902 01/01/0001

  But when I update the date is coming up as below

  SQL > update ced.cpp_Master set Ent_date = to_date (' 1 March 01', ' dd-mon-YYYY "") where ent_id = '6030902';
  SQL > commit;

  Tried under updates so

  (

  Update ced.cpp_Master set Ent_date = ' March 1 01' where ent_id = '6030902';

  Update ced.cpp_Master set Ent_date = to_char (' 1 March 01', ' dd-mon-YYYY "") where ent_id = '6030902';

  )

  Whenever the output below always. (Insert has no problem, just update a problem)

  I wonder why when there is an insertion of the date value is "01/01/01" in (Cpp_Master_Audit), but when I update the date value is "01/01/2001" ".

  I need the value to insert as "01/01/01", as all that was updated in Master table (Cpp_Master)

  SQL > SELECT * FROM CED.cpp_Master;

  6030902 01/01/2001

  
  
  My request to trigger:
  
  CREATE OR REPLACE TRIGGER CDS. CPP_AUDT
  AFTER INSERT OR UPDATE OR DELETE
  ON CED.cpp_Master REFERENCING OLD AS OLD AGAIN AS NEW
  FOR EACH LINE
  DECLARE
  l_action_code VARCHAR2 (1);
  BEGIN

  IF THE INSERTION
  THEN
  l_action_code: = 'I ';
  ELSIF UPDATE
  THEN
  l_action_code: = 'U ';
  ON THE OTHER
  l_action_code: = ';
  END IF;

  IF (l_action_code = 'I'
  OR l_action_code = '
  OR (l_action_code = 'U'
  AND (NVL (: OLD.)) ENT_ID, 0) NVL <>(: NEW.) ENT_ID, 0)
  OR NVL (TO_CHAR (: OLD.)) Ent_date, ' mm/dd/yyyy'),
  'X') <>
  NVL (TO_CHAR (: NEW.)) Ent_date, ' mm/dd/yyyy'),
  « X »)
  )))
  THEN
  INSERT IN DEC. () Cpp_Master_Audit
  ENT_ID, Ent_date, Insert_type
  )
  VALUES (DECODE (: OLD.ent_id, NULL,: NEW.ent_id,: OLD.ent_id),)
  DECODE (l_action_code, 'I',: NEW.) Ent_date, 'd', NULL, 'U', DECODE (: NEW.) Ent_date,: OLD. Ent_date, NULL,: NEW. Ent_date)),
  Insert_type l_action_code);

  END IF;
  END;
  /

  You wrote that ent_date is of type DATE

  SQL > cpp_Master Desc;

  Number of Ent_id

  Date of Ent_date

  so DO NOT fill with a chain, but with a date, and you have correct data in it.

  This:

  Update ced.cpp_Master set Ent_date = 1 March 01 ' where ent_id = '6030902';

  is simply wrong that fill you your column DATE with a string and your NUMBER column with a string filter too.
  

  
  

  Use

  Update ced.cpp_Master

  Set Ent_date = TO_DATE('01-MAR-0001','DD-MON-YYYY') where ent_id = 6030902;

  and you will have no problems (as long as the NLS_DATE_LANGUAGE parameter is set correctly to support abbreviations English months)

  HTH
  

• Number sequence for the value in the column group

  I need to create a sequnece number in a column from 5, and incrementing 5, based on the presenet values in the first column. If the value in the first column changes then the sequence would start with 5 and an increment of 5.
  
  for example: I want to generate the following output
  
  Cat_code Seq_No
  1001 5
  1001 10
  1001 15
  1001 20
  5 2001
  10 2001
  15, 2001
  3001 5
  10-3001
  4001 5
  4001 10
  4001 15
  4001 20
  5001 5
  6001 5
  5 7001
  7001 10
  7001 15
  7001 20
  7001-25
  
  So if the cat_code changes, the sequence number should still start at 5 and should be to generate the sequence number until the cat_code changes again.
  
  any help apreciated.
  
  Thank you
  Rahul

  Hi, Rahul,

  You can use the analytical function of the ROW_NUMEBR to generate the numbers, like this:

  SELECT       cat_code
  ,       5 * ROW_NUMBER () OVER ( PARTITION BY  cat_code
                                   ORDER BY        NULL
                       )       AS seq_no
  FROM       table_x
  ORDER BY  cat_code
  ,            seq_no
  ;
  

  You must use an ORDER byclause of Analytics when you call ROW_NUMBER. If you don't really care the order, so you can ORDER BY a constant, but you still need the analytical ORDER BY clause.

• Help for the reconciliation of the table in a sequence

  I need assistance with the values of an array 1 d of channels read. Table 1 d of strings contains the names of the columns in a different table.

  This must be included in a file, but only once. IM is able to do, but the only problem, the table 1 d of strings contains the previously stored values.

  These values are from a list box, which is frozen as soon as the user clicks on the button OK/START in VI. I would like to print the values of frozen listbox, but it prints the values of the unfrozen ListBox instead.

  The problem is clear to me, I should create an empty array of strings and stores this value, but where in the order this is done?

  I have attached the VI, 'Header' is the table I'm talking about.

  Thank you

  Eureka

  Solved!

  I tried to complete the tables of empty strings in the header sub - VI writing and it works!

  Thank you

  Eureka

• Help for the reconciliation of table. Average cost

  

  So this is my attempt to imitate a function block that we use in our standard converter software - "Decimation filter" which is nothing more than a running average / mobile. The sample size is adjustable to execution of 2 to 64 samples (decimation factor). I saw many topics on this and used to average around 4 large samples shift registers - but I wanted to be able to change the sample size without recompiling. I'm new to LV, there is likely a lot of better ways to do this.

  I would like to have answered is linked to clear the table, if the decimation factor is set to a lower number than the last time that the loop executed. (The uppercase - false statement is wired directly by)

  The math in the shift register: creates an array index that cycles from 0 to (decimation Factor-1). The index is then used to fill elements in the table (the rest being zeros). When the decimation factor decreases, I need zero external element in (former decimation factor - 1) (new decimation Factor-1) positions. So I tried various things, but the only thing that seems to work, it's the re - initialize the array. I think it's less than optimal.

  I tried:

  (1) leaving the tunnel of continuous wire output for the real deal and selecting the option 'use default if unwired' - thinking I'd get a table of 64 elements, of zeros. Doesn't seem to work.

  (2) a constant matrix cable tunnel exit if this value is true. When I followed him, after a decline in decimation factor - the probe seems to indicate an array of elements, not 64 No. And I do not see how to specify the size of the array of constant matrix.

  If I use this in my application it will run on a target of cRIO.

  Any help much appreciated.

  You already have your initialized table, why not use it?  Wire your table initialized via if this value is TRUE.  Or better yet, use Select? function.

  

• How to download Guided Help for the clean boot

  I would like to learn more about how to perform a boot clean and when you go to:

  http://support.Microsoft.com/default.aspx?scid=kb%3ben-us%3B310353

  Here, there is a hyperlink to:

  Download Guided Help

  When I click on it using Firefox there is a download for 310353.exe which is a binary file of opening http://download.microsoft.com

  the file is then saved and it appears in the download

  clicking on it opens an executable file.  Are you sure that you want to run 310353.exe?

  Do you want to run this file?

  Yes and then choosing this computer produces Guided Help can not be downloaded right now, please try again later...

  After many attempts, it does not download.

  When I click on it using IE it opens a file download 310353.exe application 134KB

  He then opened editor packages GSA ACW Micrsosot Corporation

  When executed, it opens

  Guided Help

  You want to run Guided Help on this computer or on another computer?

  Choose this computer and clicking next product

  Guided Help can be downloaded right now

  Please try again later or visit the help and support web site for more information.

  I went to this menu during about a week and it never download Guided Help.

  How to solve this failure to download so that I can learn about the clean boot and received interactive help?

  The information (not the ms response) that I had on http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3B310353

  is there any information to download.  The link still works, but the information for the download/installation has been removed.  And a return at a later date to check will therefore end in place with guided help can be downloaded right now.  It only works if the information has been restored.

• Envy 4500: Envy 4500 help "for the older generation of printer cartridge.

  I recently purchased a 4500 want and need a cartridge replacement for the first time today, so I bought a pack HP combo, black and Tri-couleur, NUMBER 61 at Walmart. After receiving the error "Cartridge for the older generation of printer" I did some research to see that this is a common problem but was unable to find out how to get a refund or a replacement cartridge. Obviously, I opened the package the cartridge came in so I can't go back to Wal-Mart, nor do I feel that I have it back to them because it is intact and open.

  Please let me know how I can go about getting a replacement of HP cartridge or a refund of my purchase. Again, I bought exactly what the sticker inside the printer indicates "61" so I think it should definitely be covered by HP. If they had simply given the cartridge required a different number, it simply avoidable.

  Thank you for your help on this!

  I called HP and they told me that I had to go back to Walmart for a refund. Only after that I did they would replace my 2 cartridges if Wal-Mart does not. I have already learned by Wal-Mart that they won't take them back because they are open and there is nothing visibly wrong with them. I explained to my HP representative that I would sell my HP printer and put an end to my relationship with HP. It was only after I said what he said HP would replace my cartridges, but that it was a 'one time with permission' and that I needed to be more careful in the future.

  HP please let me be clear, you do not have me any courtesy, the way I see things you did was to correct your own fault. I did appreciate really not how the incident turned as if it was my fault that I bought the wrong cartridge. I would have had much less of a problem with that if HP had apologized and admitted that they had made a mistake. I'll keep this interaction in mind next time I'm considering purchasing an HP product.

  If anyone had this same problem in the future do not waste your time, just call HP directly and be very clear with what you would like to do.

• need help for the VPN connection

  Hi guys

  can you help with that?

  I installed a VPN connection, but the tunnel shows that status: upward and the protocol description: down.

  debugging is turned on and displays following-

  ITS has applications pending (xx.xx.xx.xx local port 500, xx.xx.xx.xx remote port 500)

  DEC 20 02:39:26.762: ISAKMP: (2142): sitting IDLE. From QM immediately (QM_IDLE)

  02:39:26.762 20 Dec: ISAKMP: (2142): start Quick Mode Exchange, M - ID 3357871564

  02:39:26.762 20 Dec: ISAKMP: (2142): initiator QM gets spi

  DEC 20 02:39:26.762: ISAKMP: (2142): Pack xx.xx.xx.xx my_port 500 peer_port 500 (I) sending QM_IDLE

  02:39:26.762 20 Dec: ISAKMP: (2142): sending a packet IPv4 IKE.

  02:39:26.762 20 Dec: ISAKMP: (2142): entrance, node 3357871564 = IKE_MESG_INTERNAL, IKE_INIT_QM

  02:39:26.762 20 Dec: ISAKMP: (2142): former State = new State IKE_QM_READY = IKE_QM_I_QM1

  02:39:26.794 20 Dec: ISAKMP (2142): packet received from xx.xx.xx.xx dport 500 sport Global 500 (I) QM_IDLE

  02:39:26.794 20 Dec: ISAKMP: node set-419503660 to QM_IDLE

  DEC 20 02:39:26.794: ISAKMP: (2142): HASH payload processing. Message ID = 3875463636

  DEC 20 02:39:26.794: ISAKMP: (2142): treatment protocol NOTIFIER PROPOSAL_NOT_CHOSEN 3

  SPI 2561284360, message ID = 3875463636, a = 0x87D0CFC8

  DEC 20 02:39:26.794: ISAKMP: (2142): removal of spi 2561284360 message ID = 3357871564

  02:39:26.794 20 Dec: ISAKMP: (2142): node-937095732 error suppression REAL reason "remove larval.

  02:39:26.794 20 Dec: ISAKMP: (2142): node-419503660 error suppression FALSE reason 'informational (en) State 1.

  02:39:26.794 20 Dec: ISAKMP: (2142): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY

  02:39:26.794 20 Dec: ISAKMP: (2142): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  02:39:46.798 20 Dec: ISAKMP: (2142): purge the node-1177810765

  02:39:46.798 20 Dec: ISAKMP: (2142): purge the node-138734109

  02:39:56.763 20 Dec: % s-6-IPACCESSLOGRL: the rate limited or missed 2 sachets of access list record

  DEC 20 02:39:56.763: IPSEC (key_engine): request timer shot: count = 2,.

  local (identity) = xx.xx.xx.xx:0, distance = xx.xx.xx.xx:0,

  local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

  remote_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4)

  the config is following.

  crypto ISAKMP policy 10

  BA 3des

  preshared authentication

  Group 2

  ISAKMP crypto key xxxxxx address xx.xx.xx.xx

  !

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac vpnset

  transport mode

  !

  Crypto ipsec tech profile

  Set transform-set vpnset

  !

  !

  my-map 20 ipsec-isakmp crypto map

  defined peer xx.xx.xx.xx

  Set transform-set vpnset

  match address 155

  Hello

  As for your question, you can have more than 1 card crypto on the interface.

  However, you can use the same card encryption for several strategies. You can change the ma-card to vpnmap.
  In this way the two are enabled on the same interface, with one having a higher priority than the other.

  So if a package came from inside, the first crypto ACL interface is checked and then the next and so on. The first match found is chosen for the IPsec negotioation.