Help get it you like-acquired 60 GB of space after upgrade?

Similar Questions

• Help get it you like-choosing new Tosh model?

  Hello
  I am looking to buy a new laptop of tosh in the coming weeks, but I am just confused because there are so many models to choose from. I had hosted in a Satellite Pro M40 model no PSM46E009002EN and I thought it was one installed to my needs, then I saw other models with more options! arrghhh. The model on the tosh site selector is not precise enough.

  My needs are

  Not more than £700
  at least 512 MB of ram
  at least 60Gig HD
  at least 15 "screen
  must have built in wireless network

  all the usual stuff like output video, usb, probe etc etc.

  Prefer a model that has a firewire port, but this sacrifice

  Ideally, she should be a model that has its own dedicated graphics adapter that is not shared video memory architecture.

  Either by the way, something I should worry about? shared memory doing it really all that much of a difference? Maybe I could buy a machine with a shared architecture and upgrade to a gig of ram?

  Thanks for all your comments

  JO

  Hello jo

  It is not easy to give you some advice, because your budget is set. In my opinion you should not avoid making a decision because of 50 or £100 maybe.

  One of my friends bought Satellite M40 two months ago and I tested this unit. I must tell you that this model of laptop is perfect. The design is very nice and you can use it for everything. Wireless card is on board, the graphics chip is very good and the view is absolutely perfect (TruBrite Wide XGA). Unit has no shared memory graphics chip.

  This device is also pre-installed Express media player, and you can listen to music without booting the operating system.

  If you buy one please let us know what model of laptop is your choice.

  Good bye

• How to get you to your rear camera works again after upgrading 8.3 on an iPhone 5?

  How to get you to your rear camera works again after upgrading 8.3 on an iPhone 5?

  Is 8.3 typo?

  After which update exactly?

• After having emptied my cache, if I register in a site with my name of user and password, I get "Would you like Firefox to remember this password" how to avoid this?

  I clear my cache frequently.
  Every time I empty my cache and proceed to the signing in the email, facebook... I get the same question all over again.

  "Would you like Firefox to remember this password"
  

  How can I permanently disable this?
  

  You can disable password manager if you want to never store a name and a password.

  • Tools > Options > Security: passwords: [] "Remember passwords for sites".

  Otherwise you can click on the key icon to the left of the address bar Firefox request to store a password and click on maybe ever to create an exception block.

  In case you use 'Clear history of Firefox closing' or otherwise to clear the history.

  • do not delete Site preferences
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/remove-recent-browsing-search-and-download-history
  • Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.
  • Deletion of Cookies will delete all selected cookies, including cookies with an exception to allow that you want to keep.

• Rookie mistake help is it you like ASP 'ASP 0131'

  I'm not new to dreamweaver but dynamic web application. I followed a tutorial for dreamweaver database.
  When I try to get a glimpse of an asp page in a browser after adding a recordset object I get this message (firefox) (before the addition of the recordset object there is no problem)
  
  "Error active Server Pages 'ASP 0131'
  
  Path of the Parent not allowed
  
  nationalEx_root/admin/update_product.asp, line 2
  
  The Include file '... / Connections/connNationalEx.asp 'cannot contain'..' to indicate the parent directory. "
  
  Here's what I know. Notice that the "update_product.asp" file is located in a folder named "admin", if I take this file and move it out of the "admin" folder and drop it in the directory root... the error message disappears. So I know its simple, but I don't know what to change to make it work in the folder "data".
  Should I change the connection string? The asp file?
  Thanks for your help!
  
  Ken

  "Nevermynd" wrote in message
  News:frblev$AfA$1@forums. Macromedia.com...
  > I'm not new to dreamweaver but dynamic web application. I am
  > suite
  > a database dreamweaver tutorial.
  > When I try to get a glimpse of an asp page in a browser after adding a Recordset I
  > get
  > This message (firefox) (before the addition of the recordset object there is no problem)
  >
  > 'Error active Server Pages 'ASP 0131' '.
  >
  > Parent path not allowed

  you need to enter in IIS and enable access of Parent paths. By default, it comes
  not active in IIS.

• Need urgent help is it you like G500 problems to start with corrupted Table GPT

  I had some problems installing AVG antivirus software. I had to force quit.
  After that. I am not able to start windows 8.1
  I try with the rescue "Parted Magic" software, which comes with a utility called "Gparted".
  This utility recognizes my hard drive but tells me there are a few problems with my GPT Table:

  «/ dev/sda contains the signatures of TPG, indicating that she has a GPT table.»  However, it doesn't have a valid fake msdos partition table, as it should.  Maybe it has been altered - possibly by a program that does not include the GPT partition tables.  Or maybe you deleted the table GPT and are now using a msdos partition table.  What is a GPT partition table? »

  So, I can not access my 'PartedMagic' data or start Windows 8.1

  I guess the problem is that my GPT table is corrupted, but I do not know how to take the problem.

  Could someone give some advice?

  Thank you in advance, I'm lost.

  PD: with gdisk or gparted, I can access the GPT table:

  GParted:

  

  GDISK:

  

  Thanks for your attention neokenchi.

  I finally solved my problem.

  GDisk I had only to write the table to disk (option w), and everything is back to normal.

  I can't be sure, but I guess I must have been some problem with header the GPT and save to disk may have corrected the problem.

  So, I hope this can help others in my situation.

  You can close this thread.

  Thanks again for your help.

• Need to get the bluetooth works on Dell Studio xps 1640 after upgrade to Windows 8

  I upgraded my Dell Studio xps 1640 to Windows 8. Since then, I've never used Bluetooth, I was not concerned that my bluetooth software was not compatible.  Now, I've found a use for Bluetooth and I can't update my driver because when I try to download the driver I get the error message no bluetooth is detected.  I know that Windows 8 turned off the Bluetooth because of the lack of compatibility, but now I find myself in an enigma. How to Bluetooth if it does not appear?

  YAA dude, I have encountered the same problems with my studio xps 16, tried many things.

  Well, you can try to download the new driver dell wireless bluetooth dell Web site 4.0 module, go to Alienware laptops and look for driver windows 8, will file with a name of "Comm_Broadcom_Win8_X04_A01__Setup-39W36_ZPE", about 170 MB.

  It worked on my Studio XPS...

  Concerning

  Sundeep

  
  http://www.Dell.com/support/drivers/in/en/indhs1/product/Alienware-M18x-R2?s=DHS

  a quick link for you, change to 64-bit windows 8, go to download and communication.

• How do you access contacts on the Apple Watch after upgrade iOS 10?

  Previously, a press the button below to access contacts. Now, what?

  Hello

  Under watch OS 3, the friends feature (which was available in previous versions) comes over and there is no direct replacement for it.

  When making calls or sending of new messages, contacts instead can be selected via the phone and Messages applications or using Siri:

  • Messages: https://help.apple.com/watch/#/apd92a90f882
  • Calls: https://help.apple.com/watch/#/apdc38d7a95e

• I can't access to our private internet connection... I get the error messages like acquiring network address AND identity validation

  problem network address acquisition
  I can't access to our private internet connection... I get error messages like acquiring network address AND validation of identity no matter how long I wait nothing happens... Please help me.

  create a new internet connection or reset TCP/IP socket

• can you help me, l feel like creative cloud of English, but he implemented Türkis, what can l?

  can you help me, l feel like creative cloud of English, but he implemented Türkis, what can l?

  Hello Altan,

  See Change the language setting for Adobe Creative Cloud applications

  It could be useful!

  Rayyan

• I'm having a problem of publishing in muse. I get this message: an unknown authentication error occurred to you using adobe ID (shared_uknown_error). can anyone help? Thank you

  I'm having a problem of publishing in muse. I get this message: an unknown authentication error occurred to you using adobe ID (shared_uknown_error). can anyone help? Thank you

  Hello

  As we found during the chat session, your creative application Cloud wasn't so far because of what server Muse and British Colombia were not getting synchronized.

  Concerning

  Vivek

• I lost the small contraption white balance eyedropper and the possibility to change the exposure and can not find a way to get them back! Help! Thank you!

  I lost the small contraption white balance eyedropper and the possibility to change the exposure and can not find a way to get them back! Help! Thank you!

  You say you have lost the tab "tool"?

  If so, just right click on one of the other tabs and select "basic" in the context menu that appears.

  

• Inconu my adminstraer password, I would like to know how to replace ir or find it, iam trying in many ways, but nothing helped. Thank you

  I tried to replace my password.did does not work for me. now my password adminstratores locked, I couldn't sign it please if you can help me thank you

  We are unable to help with a forgotten or lost Microsoft policcy password: http://support.microsoft.com/kb/189126.

  I'm sorry, we can't be more helpful.  Search the Web for solutions.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• request to help build a vi to acquire a signal of pc6251 for the acquisition of data and perform fft it can u people please help me? Thanks in advance

  Hi all... I learn LabVIEW since few days.i want to acquire a signal of pc6251 of acquisition of data and perform fft it can u people please help me? Thanks in advance

  If you do only use LabVIEW for a few days, you should get familiar with it first by looking at some of the resources available here. After that, you can watch heredata acquisition.

  After reviewing these documents, you can post back with any specific questions.

• WebServices - need help getting started...

  Hi all

  I am fairly new to Web services and Coldfusion I could use some help getting started. Creating the Web service has already been made, so I need to create a new one, so that the part is already done.  The existing webservice is written in .NET and I need to consume using Coldfusion. I think I have all the information I need from the creator (s) in the various XML files. There are a few examples of applications in the .xml file format in the information that was given, as well as a wsdl.xml file. Of my reading on Coldfusion and Web services is that they are consumed by the...

  < cfinvoke webservice = "yada.wsdl" method = "use" returnvariable = "returnedVal" > "

  and send arguments through

  < cfinvokeargument

  to the Web service that returns the data.

  But t that's where I'm wrong... It seems I should use the wsdl.xml file to connect to the Web service... is that correct? I have to place the wsdl.xml outside the Web root in IIS?

  Any suggestions are appreciated.

  If you try to refer to this wsdl file:

  Directory containing wsdl.xml

  .../wwwroot/mydir/WSDL.Xml

  Then, you must use a parameter like this:

  method http://localhost/mydir/WSDL.xml"="mywsdlmethod"returnvar ="data">

  « ? WSDL"is a ColdFusion function that uses the ability of ColdFusion to generate a wsdl file dynamically on the fly from a SWC file that is configured to be a web service.