Help! I currently have no audio data

Similar Questions

• Help that I have no audio device and my USB does not work :(

  Help me I have no audio device! All I did was put my laptop on the table and it turned off. When I turned it back on, it says that I have no audio devices installed. Ive tred reinstall and back and to update, but it did not work. Also, it is not detect my USB when I plug the power cord for my mp3 player and when I plug my network card. Can someone help me? I have windows XP and I have an IBM Thinkpad

  Hello

  • Is - what sound card is recognized in the BIOS?

  You can check these links:

  No noise in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

• I have no Audio on my pc can anyone help me

  Can any help me I have no Audio on my pc when I first put it on Audio a, but after a few minutes his tge his party any body can help me solve this problem

  
  

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit in the following Microsoft Fixit article and check if it works.

  Diagnose and automatically fix the audio problems and audio playback:

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:

  Try the steps in the Microsoft article and check following.

  No sound in Windows: http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope the information is useful.

• my computer says I have no audio device / I have no sound, what do I do?

  I recently tried to 'fix' my computer slow myself (first mistake) i uninstalled some programs and now I have no sound from my computer tells me that I have no audio device yet allow me to restore it or re - install anything help! I have no audio/sound devices

  Hello

  ·         Do you see the sound card in Device Manager?

  ·         Connect various stakeholders?

  Method 1: Try to connect different speakers to this computer. Connect these speakers on another computer to check the issue.

  If the sound card and drivers are correctly installed, then it might be a problem with the speakers. Check the same.

  Method 2: Log on to the manufacturer's Web site and update the latest audio drivers.

• I have an iPhone 4S model A1387. I want to upgrade to ios 8. I currently have ios 7.1.2 (11D257). When I try to update via iphone or itunes on my mac, the answer is "your software is up-to-date." How to upgrade to ios 8?

  I have an iPhone 4S model A1387. I want to upgrade to ios 8. I currently have ios 7.1.2 (11D257). When I try to update via iphone or itunes on my mac, the answer is "your software is up-to-date." How to upgrade to ios 8? I need for a medical application that requires ios8 or above.

  Force restart your iPhone.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  And then tap settings > general > software update

  If this does not help, make sure that your Mac running the latest version of iTunes.

  You can do this by clicking on your top  Apple left of your screen.

  In the drop-down list, click: App Store

  After the opening of the App Store, select updates in the upper part of the menu of the window of the App Store.
  

• Thank you for contact I can not access my ipad air disable I try to reboot same issue pleas help me I have a lot of data in the air from my ipad

  Thank you for contact I can not access my ipad air disable I try to reboot same issue pleas help me I have a lot of data in the air from my ipad

  Here you will find a way how to activate your iPad If you have forgotten the password for your iPhone, iPad, or iPod touch or your device is disabled - Apple supports

• After reloading xp professional I have no audio or the audio drivers... Help

  After reloading xp professional I have no audio or the audio drivers... Help

  Visit the web page of manufacturer (on your computer) and find the section of support download & drivers of their page for your computer model and install the necessary drivers.  Those who understand the chipset (card mother motherboard chipset) and device video, audio, or network devices and so on.

  Any material support - including the software drivers that allow him to express prperly with any operating system - is the manufacturer of the equipment.

• Computer N5030 laptop Windows 7 starts only mode, safe mode with networking and I have no audio and Hifi. Help!

  I have a laptop N5030 Windows 7. I can only start my system in safe mode with network and I have no audio and Hifi.  Help!

  Hello. Maybe it's a software or a hardware failure, then run the diagnosis of ePSA on hardware. It is normal to have no audio in safe mode.

  I had a similar problem a few months ago due to the failure of one of my modules of RAM.

• How to make my computer send all audio data via an optical audio cable instead of making headphones?

  Howdy,

  To listen to the radio online or CD played from my computer, I used to connect the computer to my entertainment system at home since the headphone jack of the computer to the port on my home entertainment system.

  Now, I wanted to get a better sound and bought the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the system entertainmeny home via digital cable optical, rather than by the headphone. If I just disconnect the cable between the headphone and the port to THE and have only the PC and the system connected with the optical audio cable, I can't hear any sound. I suspect that the computer is not sending the data through the optical audio port. I'm not able to figure out how I can adjust the settings on my computer so that, from now on, all sounds are emitted through the optical audio.

  (1) I want to do it especially for my desktop HP (configuration below) and advice on how to do this would be appreciated.

  (2) I also have a HP laptop (configuration below) and I was wondering if this would be feasible too (even if she does not have an audio output, but it has an HDMI output - you can convert audio optical?)

  Thanks in advance!

  My office is:

  WANT to h8xt,
  • Windows 8 64
  • 3rd generation Intel (r) Core processor quad-core i7-3770 [3.4 GHz, 8 MB of shared cache]
  • 12GB DDR3 1333 MHz SDRAM [3 DIMMS]
  • 1 TB 7200 RPM SATA hard drive
  • No secondary hard drive
  • 1 GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
  • 300W power supply
  • DVD SuperMulti burner
  • LAN wireless-N (1 x 1) card
  • 15-in-1 reader cards, 2 USB 2.0 (front), 2 USB 3.0 (top)
  • No additional desktop software
  • No additional security software
  • No TV Tuner
  • Beats Audio (tm) - a built-in studio quality sound
  • HP USB volume control keyboard and mouse with Win 8 keyboard
  • Adobe Premiere Elements and Photoshop Elements 10

  And the laptop:

  HP ENVY 15t Quad

  Hello @_goma,.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I read your post about how you want to send all the audio data via an optical audio cable instead of the headphone jack of your computer, and I'd be happy to help you in this case!

  To configure your desktop computer to activate the optical audio cable, I advise you to follow the steps below:

  Step 1. Click on the button of the Windows key on your desktop

  Step 2. Type "Control Panel."

  Step 3. Select "Control Panel" in the upper right corner

  Step 4. Select sound

  Step 5. On the Read tab, right click on the white box under available devices

  Step 6. Select "Show disabled" and "show disconnected devices".

  Step 7. Connect your Audio optical cable

  Step 8. Select your cable Audio perspective as the default device, and click 'enable '.

  Because it is not possible to convert the audio output HDMI output on your laptop, it is regrettable that the laptop is not able to connect with an optical audio cable.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• MXF in ProRes conversion (or whatever it is) - and there is no audio data

  Anyone know of a solution for this? I'm trying to convert MXF files with 8 audio channels in ProRes 422. There is no audio data once the files to convert, but the video is very good. I've tried other types of software and even export it as H.264 instead of ProRes to see if I can understand where the problem lies. I don't need 8 audio channels, only 1 is fine, but try different audio settings did not help either.

  Elsewhere, some posts have mentioned something about software prioritize bad audio channels, but I have no idea how I would even look for this kind of adjustment or change. And it is not specific to the Media Encoder. Can anyone help? I tried for 2 days now for nothing is! I have never encountered this problem before, so appreciate any input.

  Hi GJ,.

  Anyone know of a solution for this? I'm trying to convert MXF files with 8 audio channels in ProRes 422. There is no audio data once the files to convert, but the video is very good.

  Are you still facing this problem? In the affirmative, please contact technical support and report on all the solutions: http://bit.ly/PPro-support

  Thank you

  Kevin

• Current version of the data in the database has changed...

  Hi, I have an updated report which hurts...
  
  This is the SQL code for it:
  
  Select
  "ITEM_BOM_LINE_ID,"
  "ITEM_BOM_ID,"
  "ITEM_ID",.
  "ID_PROCESSUS,"
  "SEQ,"
  DECODE (ID_PROCESSUS, NULL, QUANTITY, ") AMOUNT.
  DECODE (ID_processus, NULL, UOM_CODE, ") uom_code,.
  "VOLTAGE_PROBE,"
  'POSITION ',.
  "POS."
  "DESCRIPTION".
  of ' #OWNER # '. " TOFC_ITEM_BOM_LINES ".
  where "ITEM_BOM_ID" =: P20_ITEM_BOM_ID
  
  In that select it the ID_processus or the item_id is defined. Cannot assign at the same time.
  
  The description field is what hurt. When I run the page and try to write something in the description field on a line where ID_processus is defined this error appears:
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-20001: ORA-20001: current version of the data in the database has changed since the user has launched the process of update. current checksum = "B54E29267EC18630B58818FF4B710D41" element = '925466414031BD2DE082A6F954889340' checksum., update of "trailers". "" TOFC_ITEM_BOM_LINES ""ITEM_BOM_LINE_ID"= value: b1, 'ITEM_BOM_ID' =: b2, 'ITEM_ID' =: b3, 'ID_processus' =: b4,"SEQ"=: b5, 'QUANTITY' =: b6, 'UOM_CODE' =: b7, 'DESCRIPTION' =: b8
  
  It works fine when I write something in the description field on a line where item_id is not null. Also all other fields work perfectly.
  
  Can someone tell me whats wrong?
  
  Thanks :)

  Hello

  After a re-read of your OP, I noticed that
  DECODE (ID_PROCESSUS, NULL, QUANTITY, ") AMOUNT.
  DECODE (ID_processus, NULL, UOM_CODE, ") uom_code,.
  in your query.
  And it breaks when ID_processus is NOT NULL (and ITEM_ID is null), isn't?
  That's because you change (sort of) the QUANTITY and the UOM_CODE when that happens. Your query retrieves different values than those contained in the database (for example "instead of the actual value). And these 'new' values are compared with the values of database and then there is a difference. Where the error.

  But now: how to solve?
  What exactly are you trying to achieve with this construction? Is there a business rule that AMOUNT and UOM_CODE must be blank if ID_processus is not null? To add a constraint validation to your table and just show the values in your table. Or to show or hide a value of the terms of use. Or use another (made) column in your query that is not bound to a database field.

  I hope this helps...

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• in Farmville you currently have not all messages in the diet of your game.

  You currently have not all messages in your game stream, the error message that I get to Farmville

  URL of affected sites

  http://

  Hello

  You may need to contact the help of Facebook or Farmville on this error message support. Do you get the same error message in Internet Explorer?

• L50-A-19N satellite can not read audio data from multiple sources

  I can't read the audio data from multiple sources. It is very annoying when I have 2 youtube videos, playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 open media players and 1 youtube video playing, youtube video has no sound...
  It disappears when I plug my headphones...

  I already have all the latest drivers, the DTS driver was last updated was in 2014, his day of February of this year...

  
  
  
  
  
  

  25/02/14

  His Studio in DTS

  DTS Inc.

  Windows 8.1 - 64 Bit

  1.01.2700

  I don't know if this has the feel, but I had his most recent DTS driver that I found, it is not my laptop model, but they all seem to be the same - v1.1.88.0
  I uninstalled the DTS software and still had the same problem, then it is irrelevant on its driver somehow...

  
  
  
  
  
  

  02/10/15

  Audio driver

  Integrated Device Technology Inc.

  Windows 8.1 - 64 Bit

  6.10.6491.0

  Audio driver IDT has more recent release date, but the version of the driver is the same as the 2013 one...
  Why the older drivers of toshiba releaseing as 'NEW '?
  

  2nd is my Advanced settings speakers, nothing has changed when I disabled "allow applications to take exclusive control of this device.
  

  Sorry but I don't understand your problem.
  I tested it on my machine and if I start the music on three different sources (YouTube, player, web radio) I can hear all together, but it makes no sense to listen to music from different sources.

  Or how do understand you?

• How to split audio data in images after reading a file

  Hi im a student of final year done my project in speech recognition using labview. could someone help me with how to split an audio data in image file for further processing.

  You could read wav files in LabVIEW using these VI: http://zone.ni.com/reference/en-XX/help/371361H-01/lvpict/sfilevis/ once you've read, divide the waveform in the picture of your choice.

  Before you return to the report on not enough memory, please read this: http://forums.ni.com/t5/LabVIEW/not-enough-memory-to-plot-wav-file/m-p/754592

  Search results: http://search.ni.com/nisearch/app/main/p/bot/no/ap/global/lang/en/pg/1/ps/30/q/wav%20file/

• After one of the automatic updates of hp my beats.exe file is missing. I have however audio

  I have a HP Pavilion dv7 laptop.  Everything has always worked well until the last automatic update of HP.  My audio icon Beats and software seem to be missing.  I have however audio and icons that look generic.

  If I go to start, Control Panel, then select Beats Audio Control Panel Icon.  I get a reply that he cannot start .coups file fined.

  He is had nothing downloaded on the computer laptop, but HP implemented to date.

  Any ideas.

  Adam

  Hi Adam,.

  You are more than welcome and I'm glad to hear he's working

  Good luck and a great year.

  DP - K