Help in the table URL title Edit - need help on creating html files

Similar Questions

• The references in the table FM titles do not work in PDF format

  I use FrameMaker 8.0p277.

  I have inserted many links to titles of the Table in a book. They work when I Ctrl + Alt click in the FrameMaker file. However, none of them work in the PDF file.

  All other cross-references of the position of the styles and the URLs work well, it's only the headings of table who fail.

  I tried to check the styles of paragraph and character for the traps that I was taken by those from before, but there seems to be none.

  Someone at - it ideas, what does not work?

  Please try then. Note: it is generally recommended to have this option when you create interactive PDFs of FM. Post-processing routines tend to be a tad aggressive and remove valid links.

• How to use the full Windows Vista Edition backup utility to create a backup of the computer of my computer on a network drive?

  I can read and write in my Win7 computer I'm currently configured to run any server at home, I can watch TV, store files and folders individual, to create, remove, in other words all I can do on this machine, I can do. 3. to disks are mapped to this machine and show as readers y and z.

  I had no problem establishing actions and everything seems to work.

  However, when I try to do a full backup of a computer with network drives they don't show in the drive selection drop-down list in the center of complete backup of Windows. Arises in each drive on this machine, not the target readers when they are listed in my computer and do show and reconnect when I reboot the machines.

  Any suggestion would be appreciated.

  Thank you:

  Don

  Hi Don,

  You can follow these methods & check if it helps.

  Method 1

  You can cancel the drive mapping & check if readers appear in the Windows complete PC Backup Center.

  Disconnect your computer from a network or network drive

  Reference: back up your programs, files and settings of the system,

  Method 2

  In addition, you can also follow the suggestion of TexRyker on Wednesday, February 28, 2007 18:07 from this link.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/f545e8ae-46fc-4BEE-bfd8-be1fe1151e04/

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about the back upward, and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I export bookmarks, the created html file does not contain my favorites, why?

  I have Firefox for PC version 26.0 and Firefox for Android version 26.0.1 and is my favorite browser.

  I want to try Google chrome (to test our Web site and a few others with Firefox, IE, and Chrome). I also wanted to import my favorites Firefox to Chrome.

  My Firefox for PC bookmarks are in a folder called Mobile favorite. Bookmarks are synced with my android. This folder was created automatically with the synchronization feature in Firefox.

  When I try to export my bookmarks Firefox PC, Mobile bookmarks file exports, only a few others that I have in the bookmarks toolbar.

  I even tried direct importation using Chrome. Same result. No records of Mobile bookmarks, than those of the bookmarks toolbar.

  Hi jerryferreira, Sync created this Mobile bookmarks folder? Since it is not in the 3 standard containers, I think you might need to copy it in the bookmarks Menu. Of course, this creates a risk of duplication while Sync is active. Don't know what to suggest to avoid this.

• In Adobe dreamweaver CS6 where can I find the hotspot tool [title edited by Moderator]

  Boss in an Adobe dreamweaver CS6 where I can find the hotspot tool

  Hello

  My way is (all comands translated from my German DW):

  1 insert an image

  2. click on the image

  3. menu for hotspot tools opens (see screenshot, where I used "Polygon")

  4. click on the image (see screenshot) > give an 'alt' for your image, if you want to.

  

  5 make your desired shape:

  

  6 and in your code you will now see something like:

  

  Hans-Günter

• SFC.exe flashes on the screen and will I need to download a torrent file, what is the problem?

  Gateway NV54... Try to open the torrent file... Need sfc.exe. It flashes on the screen and disappeared! What should I do?

  Hello
   
  Perform the System Restore to the point that your computer was working normally.

• Help me create a file of pings number of IP address

  How to create a batch file for ping number IP address (IP address, getaway, DNS and other IP address of the server) and save them in a text file.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Microsoft HTML Help - lack expand icon in the table of contents

  

  Hello

  The development (+) icon suddenly is no longer in the table of contents, when I generate a Microsoft HTML Help output. I can always double click books to develop them and see the underlying topics... but no + icon.

  I have attached a few screenshots of what is happening and what needs to happen.

  
  Can someone help me recover this icon?

  Thank you!

  Hello

  Examine your SSL properties, and then click Change next to advanced settings. Then tab table of contents lines allow root and you can then activate the signs Plus/minus.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Help setting up the table/list of choices

  Hello:
  
  I create an application where I use a custom authentication scheme and captures all user information in a separate table. When the user logs in he will refer to the table to identify a user name and password stored in the table.
  
  I am allowing users to create their own user accounts that will be default to basic access levels. Further along in the process, users will need to select a person to approve something. I want to use a list of choices so that the name of the approver is entered regularly every time. The user table has the following format:
  
  Default primary key Type Nullable data column name
  Username VARCHAR2 (8) No - 1
  PASSWORD VARCHAR2 (8) No. -
  FNAME VARCHAR2 (30) - No.
  LNAME VARCHAR2 (30) - No.
  E-MAIL VARCHAR2 (50) - No.
  ADMIN VARCHAR2 (1) Yes.
  APPROVER VARCHAR2 (1) Yes.
  
  
  I would like users to be able to choose from a list of choices that displays LNAME, FNAME. I don't know how to make the two fields appear in a list of choices.
  
  Furthermore, I would like to (if possible) to keep the two separate fields for the creation of user accounts so that I can get a coherent LNAME, FNAME format and people are not go backwards (e.g., Smith, Joe c. Joe Smith).
  
  If I can't show the two fields in the drop-down list, is there a way where I could add a free calculation filed to the table that will concatenate LNAME"," FNAME?
  
  Thanks for any help you can provide.

  RKD,

  Create a dynamic list of values.

  select lname||', '||fname displayed, username returned
  from user
  order by 1
  

  You can view what you want, regardless of the value returned. And that includes the concatenation of elements together (or do other calculations/manipulations).

  -David

• Read xls file and display the data in the table.

  Hello

  Try to read the data from an xls or csv file and fill the same data in the table. If I need to use the table to store the data from the file and display, hoping that someone could help.

  Thank you

  Hari

  Hi hari,.

  One thing that is very important when you use the Excel activeX interface (in case you need it) is good termination of worksheet/workbook/lettering handles.

  You need these handles to specify what cell in which file you are trying to access.

  If you are unable to throw each handle you have, then you will be left with ghost Excel process in your task manager, devours your system's memory.

  Thus, when debugging of your application, open the Task Manager and the watch as Excel treats created/destroyed and make sure that you end up with zero Excel process running when your application is closed.

  Also consider the case of fault for your program. Check that your exit routes did not omit any termination of handle.

• implementation of the table with the scroll bar. (data scrolling)

  Hello

  I want to show the web service data in the table with scroll bar using java script or html or css .actuall I want only a part of the screen is not whole screen scrollable. can you suggest how it is possible.any suggestion? I used phone gap technology. I used iscroll but it does not work in blackberry data are not displayed in the Simulator... Help, please

  Thank you

  ravi1989 wrote:

  Hello

  I want to show the web service data in the table with scroll bar using java script or html or css .actuall I want only a part of the screen is not whole screen scrollable. can you suggest how it is possible.any suggestion? I used phone gap technology. I used iscroll but it does not work in blackberry data are not displayed in the Simulator... Help, please

  According to devices/operating systems that you want to support, you could give bbUI.js a change. It works really well in most of the cases, and I think there are a lot of things you don't need to worry more because bbUI.js is just for you.

  Look more at the scrollPanel example that does exactly what it takes, a part only of the entire screen of scrolling you can configure a height in the HTML source code directly.

• Creating indexes for the table

  can someone help me how to create indexes in the table. I m creating own table... I need to select a particular field in the table. So I need to calculate the index position. I use my code like this,

  This will returnthe number of columns in the table.

  Class array

  {

  private int Table_Index()
  {
  for (int x = 0; x)<>
  {
  table_index = x;
  }
  Return table_index;
  }

  }

  MainClass can I get this length of Index

  Table T1;

  int t1 is T1. Table_Index();

  This property returns my length (4) of table column

  Using this index (t1) I HAV to see what position I'm at table now...

  someone help me...

  You can use a listfield, he supports methods to get the selected row and its contents.

• End of the table row of the Publsiher in EBS XML report

  We report the invoice lines in a table with (horizontal) lines hidden line separator. When there are more number of lines, and this table goes to the next page, then the bottom line of the border of the table does not appear in the current page. He only appears once in the page where the table ends. We need this on every page. Any help?

  Can you send me your sample RTF and xml file

• Questions about the reorganization of the rows in the table by drag-and - drop feature

  I am referring to the demo: 106. Drag-and-drop the reorganization of the rows of the table in aCorner of Code DF to implement my case.

  I am facing some problems:

  1. the view object (bound to the table) is read only and it is created directly by very complex SQL queries, without entity objects. When it is run the code: dragRow.removeAndRetain () in the method: DnDAction processDrop (DropEvent dropEvent), it throws the error so that a guest view object is read-only. I want to know if there is another way to delete the moved collection line?

   public DnDAction processDrop(DropEvent dropEvent) {
  ...       
         CollectionModel collectionModel = (CollectionModel) table.getValue();        
          JUCtrlHierBinding treeBinding = (JUCtrlHierBinding) collectionModel.getWrappedData();
          
          //get access to the ADF iterator binding used by the table and the underlying RowSetIterator.
          //The RowSetIterator allows us to remove and re-instert the dragged row
          DCIteratorBinding departmentsIterator = treeBinding.getDCIteratorBinding();               
          RowSetIterator rsi = departmentsIterator.getRowSetIterator(); 
  
          int indexOfDropRow= rsi.getRangeIndexOf(dropRow);
         //get access to the oracle.jbo.Row instance represneting this table row
         Row dragRow = (ViewRowImpl)table.getRowData(draggedRowKey);
         //remove dragged row from collection so it can be added back
         dragRow.removeAndRetain();
         rsi.insertRowAtRangeIndex(indexOfDropRow, dragRow);
        ...
  }
  

  2. When you click on a button, I need to save the command results in the database using the command update # of each rank. Here it is the handler method for the event of the action (in MB) button.

  I want to use RowSetIterator table for encode it from all ranks and update the value # order of each rank.   I call a data control method to run sql update. is it ok? any suggestion?

      public void processSaveOrder(ActionEvent actionEvent) {
          CollectionModel collectionModel = (CollectionModel) mytable.getValue();        
          JUCtrlHierBinding treeBinding = (JUCtrlHierBinding) collectionModel.getWrappedData();
          
          //get access to the ADF iterator binding used by the table and the underlying RowSetIterator.
          //The RowSetIterator allows us to remove and re-instert the dragged row
          DCIteratorBinding iterator = treeBinding.getDCIteratorBinding();               
          RowSetIterator rsi = iterator.getRowSetIterator();
          Row row =rsi.first();
          System.out.println(0+"="+ row);
          int i = 1;
          while(rsi.hasNext()){
              row = rsi.next();
              System.out.println(i+"="+ row.getKey());
              i++;
          }
  
      }
  

  A workaround solution was found:

  In ADF 12 c, it can be solved by changing Updatable "Always" in the details tab of each attributes to read-only view object without entity object.

• by selecting the name of the table as a variable

  Please correct it.
  
  declare
  v_ename varchar2 (10): = 'emp ';
  
  Start
  for j in (select ename from v_ename)
  loop
  dbms_output.put_line (j.ename);
  end loop;
  end;
  
  get error table v_ename does not exist.
  I have to use v_ename, as I don't know the name of the table.

  You need to use dynamic SQL statements if it is really an obligation. In the majority of cases, when people think that they need to code SQL dynamic, however, they attempt to conceal a more fundamental problem of design (often a data model that needs to be fixed). Since you haven't explained why you think you have need to use dynamic SQL statements, it is difficult to know if it's just adding more complexity to your environment.

  If you know that there is always an ENAME column in which table is passed, you know that the ENAME column is always a VARCHAR2 (10), and the number of rows in the table is reasonably small

  SQL> ed
  Wrote file afiedt.buf
  
    1  declare
    2    type ename_tbl is table of varchar2(10);
    3    l_enames ename_tbl;
    4    l_table_name varchar2(30) := 'EMP';
    5  begin
    6    execute immediate 'select ename from ' || l_table_name
    7       bulk collect into l_enames;
    8    for i in 1..l_enames.count
    9    loop
   10      dbms_output.put_line( l_enames(i) );
   11    end loop;
   12* end;
   13  /
  SMITH
  ALLEN
  WARD
  JONES
  MARTIN
  BLAKE
  CLARK
  SCOTT
  KING
  TURNER
  ADAMS
  JAMES
  FORD
  MILLER
  
  PL/SQL procedure successfully completed.
  

  Justin