help loading the program I bought a long time ago...

Similar Questions

• Once I have purchase the monthly package and load the programs on my computer, I am able to load presets, I bought outside of adobe for programs?

  Once I have purchase the monthly package and load the programs on my computer, I am able to load presets, I bought outside of adobe for programs?

  If the presets are compatible with the versions you are installing, Yes.

• Windows 7 Media Center very slow to load the program guide

  I run a Fujitsu Esprimo E3521 Core 2 Duo 2.93GHz with 2 GB of Ram. I use a dual DVB - T2 tuner card black gold. The PC works as expected with all other tasks (Netflix, iPlayer, MyMovies for Media Center), but when I first load the program guide, it takes more than 30 seconds before the system displays the guide and becomes sensitive (later loading times are a little faster, unless the PC is in "standby", in which case I face the same deadline when you enter the program guide). There is no other applications running on the system (the PC directly in the MC boots). Once the guide is loaded, it works at normal speed (sometimes channel tuning may take longer than expected, but usually he settles in a few seconds).

  I'm running Windows 7 Ultimate. Recently, I reinstalled the operating system and for a few days the PC seems to be running OK, but he soon return to be incredibly slow, loading guide. (I also started to notice that it takes longer time to start playback of recorded assets).

  Any help or pointers would be appreciated.

  Thank you very much

  R

  (Moved to programs)

  Hi Richard,

  Welcome to Microsoft Community forum.  Let me help you with your concern.

  The information in the Guide is periodically downloaded from the Internet from your Guide list service provider. You are notified that "no data is available" in the Guide in the case either of the following things:

  • Windows Media Center cannot connect to the Internet and download the new Guide information for a long period of time, and the Guide information that was previously downloaded is corrupt or has expired. For more information, see solving problems with an Internet connection. (Applicable for Windows 7 alos article)
  • Guide information is not available for your location from the lists Guide service provider. For more information, see download updated Guide listings. (Applicable for Windows 7 alos article)

  You can see this Microsoft article and check if it helps:

  http://Windows.Microsoft.com/is-is/Windows/use-guide-Media-Center#1TC=Windows-7

  If the Guide appears blank and manually download the latest announcements of Guide doesn't seem to work, you may need to set up your TV signal again. To learn how, see set up a signal TV in Windows Media Center.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Change from windows to mac, how can I get the programs I bought for windows?

  Change from windows to mac, how can I get the programs I bought for windows?

  HAV photoshop loose 11 for my windows computer but I have now bought a mac. I can do something to get the program, I have to convert it to mac?

  Hello

  Please see a product for another language or version of trading platform

  Hope that helps!

  Kind regards

  Sheena

• where are the programs we bought

  After having bought the suite adobe, I cannot get the tests. Why, where are the programs we bought

  Hi Jason,

  If you are referring to the plan of CC from Adobe, please visit the following help documents to install:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• Download adobe instruction manager, says now that 00 days left in the trial, but I bought the product a long time ago?

  Suddenly asked me to download adobe program manager when I started Adobe Premiere elements 12. I did, and then he asked me to connect to my account, as I did. Now she says that I rest 00 days my trial and will not start. I purchased the product a long time ago, it was never on an experimental basis. My account also contains this provision. That is what it is?

  kcoldani

  What operating system your 12 elements first ran? Are what operating system you now trying to get the product installed? Even?

  For now I guess that Windows 7, 8 or 8.1 64bits.

  When you arrive at the test looking for dialogue, does include the choice of license this product or buy it? If so, what happens if you click on this product licensed?

  How do you install the program - installation files download online or the packing box the program installation disc?

  If a download online your Adobe account/orders, there are 2 files to download... exe (Adobe Application Manager) and 7z (the program).

  Have you tried to update Adobe Application Manager that is being requested? Probably referring to

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=4773

  Please check and review, and then we can try to put it altogether.

  Thank you.

  RTA

• When I opened the window "save the Page under", the drop-down box file name indicates the files that have been saved a long time ago. It is not cleared by a function 'clear history' that I can find. How can I erase this?

  1. Question

  When I opened the window "save the Page under", the drop-down box file name indicates the files that have been saved a long time ago. It is not cleared by a function 'clear history' that I can find. How can I erase this?

  Hello.

  I think this is a related issue of Windows, because it is the Manager to save the windows file that we are talking about here (right?). You should contact Microsoft for help with this one, I think. You expect to be able to delete entries simply by touching delete on your keyboard when they are concentrated (that is how it goes for the removal of the form entries specific autocomplete in Firefox), but I have not tried.

  I'm sorry I can't be more helpful.

• Vista has stopped turning the games run for a long time.

  Vista has stopped turning the games run for a long time. The display would go crazy and the sytem would lock. Gotta make a stop with the power button. No errors are recorded. I re-installed the game. Same thing. I reinstalled Vista 64. Same thing. I get about 3 minutes in the game and then locking the. 1 single game still work (BioShock2). COD - MW2 and COD MW lock the sytem. One is direct install, and the other is the steam. I have a video card Nvidia GTX 280 with the latest drivers from Microsoft. Before the reinstall, I tried to install the most recent NVIDIA. Did not help. Yet the locks without showing error. About half of the time it stops at my off video card a few seconds after that the display goes crazy. BioShock uses DirectX 10, and others use DirectX 11. I read on some sites that 11 causes the video crashes on some systems. I want to know is why 11 is working for so long and stop NOW. Is there a way to make the games all run on 10? COD BlackOPS crashes too. I played ALL these games over and over again until the last 3 weeks. If there was some error to post logs I would but there is not. Any suggestions on where to find some kind of problem that could cause this? The video card was removed, cleaned and put back into the computer. Still crashes. 1 in 4 of the games will take place without any problems. 3 will be blocking of the computer and the video trash in 3 minutes or less to start the game. The video is great, until blocking.

  Suggestions on how to fix or where to additional troubleshooting for the cause will be greatly appreciated.

  Try running the memory and the hard drive scan to make sure that both are good.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  If both check good, the map may be at fault. In which case it is overheating you can manually increase the fan speed in the Nvidia Control Panel.

• Since the last update, new emails show that when I load the program. SE message to show new emails.

  Clicking on get messages does not new emails.

  To diagnose problems with Thunderbird, try the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• The system preference takes a long time to load

  As the title suggests, end of 2013 (10.11.4) System Preferences on my iMac takes a long time to load, even after a fresh reinstall and/or reboot (tried both). It takes about 20 seconds to one minute each time to open (except when I close it and immediately open it once again, as it is always loaded in memory). This problem existed only after the upgrade to El Capitan, and I saw many other people with iMacs with the same problem. I tried to remove cache for before system preferences files, but that did not help at all. I don't have a FileVault if it makes a difference, even if I did before reinstall, but never turned back (persistent question anyway). Any recommendations would be useful. Thank you!

  Data sheet:

  iMac (end 2013)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  1 TB 5400 RPM HARD DRIVE

  Intel Pro Iris 1536 MB

  I found it is the State of affairs in 10.11 if running a HD spinning.  Don't feel alone.

  I suspect that it is a function of low priority in the memory compressed algorithm.

  Upgrading to an SSD and it will rise to attention.

• help in the programming of the ultrasonic sensor Hc-sr04

  Hi im new in labview, I must connect the sensor SR04 HC to the SensorDAQ ultrasound and I have to measure the distance between the sensor and an objetc, I made a small program but the distance is very erratic and I saw an example but I have not underestand the code in the example, so I don't know how to change it to do what I need later today, I'll put the vi, I did and I found, my code is very short and the code I got terrible long.

  If my program is bad, can you tellme where and why? or isn't the code as the sensor requieres it please tell me.

  If the example I add the code I really need can you explain all the parts and how to change it in order to work with the sensordaq.

  Can you tell me how to connect the sensor to the sensor data acquisition? so you can help me, I'll add my photos and connection diagram.

  I do a sensor of reservoir with this sensor data, and order a motor with it, if the level is below 20% use the Stairmaster to open a valve, is his scratching that nearly 80% the stepper.

  Another thing I need is when the level of the reservoir is scratching at 80% another mottor, steper no must be turned on and should work for a specified time. When this time is on a signal of "empty tank" should be displayed.

  I think is a lot of what I need, I plugged the stepper mottor (bipolar motor 4 son) and I do can work, I don't know how to operate in both directions, so I have to solve this problem.

  I will add photos and my screws later today, Please helpme, the most important thing is to make the sensor to work.

  THANKS FOR THE HELP.

  
  

• Impossible to load the program properly when connected in the field

  I have a small office network running win2k server and 8 workstations under win2k and winxp.   I'm upgrading of the fastest desktop computers that are running Windows XP pro and having difficulty in loading my main practice management software while I'm connected to the domain.  I have 2 identical workstations under winxp pro where one of them charge very well and the other won't.  One successful would only the 'administrator' has been connected to the workstation.  Then I went then to users and connected to the domain and everything worked.  The other computer will load and works very well as long as I am connected to the workstation.  When I connect to the domain and click on the program, it acts like its trying to open but nothing happens.  I tried to remove the program, and reinstall them once logged into the domain, but the same thing going on... why?   The only thing that might be different between the 2 workstations is sequencing when I added users, and when I first joined the field.

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.
  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• My pc is unable to load the program except in safe mode, which is a recent problem. Time must also be reset whenever I start. any suggestions

  At startup the program do not load beyond the xp logo and then a black screen. The only way to load is in safe mode. The clock needs daily update, is it connected?  I can't restore, but might do at the beginning, but not more. My antivirus is also disabled, it's because its in safe mode. Could all this be reduced to a battery of spleen?

  people suggestions.

  Hi Mike,.

  ·         You did changes to the computer before the show?

  Try the following.

  Method 1: Read the following article.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  Method 2: Follow the steps in the article mentioned below.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

• ? I need to remove an old Vista PC of 12 elements in Photoshop so I can load the program on a new 8 PC victory?

  Are tired many times to load Photoshop Elements on a new PC in Windows 8. the CD loads and installs ok but the program will not work, it does nothing. I wonder if I need to uninstall the software from my old PC Vista first because I have a software to a user?  TKS

  If you don't get any notification about having too many activations then it should not be a problem insofar as the installation remaining on the Vista PC.  If the application doesn't work at all then you might try to install download instead of using the drive.

  PES 10, 11, 12, 13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html