Impossible to load the program properly when connected in the field

Similar Questions

• I can not install updates KB973593, KB973704, kb974561, KB975960 I get the error code 646 #! In addition, Microsoft IATAP adapter #5 ROOT\ * ISATAP\0007; #7\0008; 9\0011 # device does not not impossible to load the required driver.

  The program that I have problems with, install my updates, they moved it and I get an error code 646 #. I tried to fallow the guide to fixing the problems to solve the problem though, everything I've read and tried did not work! I have plenty of room for my memory and now I'm stuck! In addition, my adapter from microsoft IATAP #5 Root\ ISATAP\0007; Microsoft IATAP adapter #7 Root\ISATAP\0008 and IATAP microsoft adapter 9 # 0011 Root\ISATAP\ these 3 devices not working properly because windows cannot load the driver for this device, and I don't have a clue on what and how to solve this problem at all. "Were the changes that I made, I started using Mozilla Firefox 3.5.3 for my internet conection and I installed two programs (1) speed of Uniblue SN 2009 and (2) Uniblue Registry Booster 2010 both programs are by Uniblue Systems. CTA Neather program worked as they said that if I uninstslled them and after that there about 2 weeks later I noticed that my updates of the program did not work. , or if these device IATAP drivers worked! I tried the system repair and recovery, which also does not solve the problem. I have a Toshiba Satellite A215 laptop 2.00 GB and my OS is; Microsoft Windows Vista Home Premium, Patch level; Service Pack 2. I'd appreciate any help to fix these problems that I'm having with these programs and drivers, I know just enough about computers to really screw things. Please I need a step by step instruction.

  Thank you

  Keith

  I had to disable the "User Account Control" (UAC), which allows you to run as administrator in Vista.  After that I turned it off, all 4 of these updates installed and it doesn't require manual installation.   Follow these steps:

  In the case of Vista view:

  1.) go to start; Control Panel; "User accounts and family safety"; User accounts.
  2.) click on 'Enable user account control or disable' (last point on the page)
  3.) clear the checkbox "Use User Account Control (UAC) to help protect your computer" and click "OK."
  4.) restart the computer, and then run the installation of the system and they work.

  If you are in Classic view:

  1.) go to start; Control Panel; Security Center
  2 screen.) in the "Windows Security Center", go to the last item "User Account Control" and click the button to turn off.

  You can also see the security shield in your Start menu.  You can also access the UAC via this.

  After that the installation of the system have been updated, make sure that you go back and turn the UAC "" and then restart your computer so that unauthorized updates do not occur.   Always try this turn off if install doesn't work.

• Optiarc bd rom bc - 5500 s work stopped during the upgrade to Windows 7, Windows Vista 64-bit impossible to load the driver.

  Hello

  I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):

  I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
  Concerning
  Tomgold

  Hi tomgold,

   

  Welcome to Microsoft Answers Forums.

  This can also occur if an incorrect device driver has been installed for the DVD-ROM device.

  I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.

  Device Manager error codes

  http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1

  If the above, step fails I would suggest that you run the patch available in the link below and check if it works.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to find the field read and write VI in labview 2009

  where is the field point to read and write VI in labview 2009

  According to the version of LV, BT pallets can be sensitive to the context. Try to create a project and add a fieldpoint target to the project.  Right-click on the target of FP in your project and select new > vi.  Now FP functions should appear

• Impossible to select the fields in Acrobat Pro XI tools/editor of formulas to calculate

  First of all, in the form Acrobat Pro XI during an attempted editor calculate fields, I don't and then select the fields (click), to calculate.  I can only just select or deselect all.

  Also, if my simple spreadsheet formula is:

  =IF(Value01> 0,SUM(Value01* (Value02-Value03)),"")

  Is there a simple way to translate this formula in a calculation script in the form Pro Adobe Acrobat XI (or FormsCentral) tools?

  Thanks for any input.

  Relating to the selection of fields: use the space bar or click a little out of the center of

  the checkbox. This is a known problem in Acrobat that has not been resolved yet.

  Unfortunately.

• Impossible to uninstall a program even when im in programs page

  The program is "ooVo" impossible to get rid of iof it

  The program is "ooVo" impossible to get rid of iof it

  Hey grace32

  According to google, they have information on oovoo and you also do not provide information on your operating syatem

  and it's an instance of vista installation

  read the information on google about oovoo below removing links

  http://www.Google.com/search?hl=en&&SA=X&EI=8lgqTZaIJcHCcenygZkB&ved=0CBEQBSgA&q=remove+ooVOo&spell=1

  or try the free revouninstaller program

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Walter, the time zone traveller

• Z6200 - printhead status: unknown, impossible to load the print heads.

  Hello

  I am a user of HP DJ 5500 long and just before Christmas, we have invested in a Z6200. Right now, I have a problem that happens with him because he is stuck in a loop trying to replace the printheads.

  I spent some time trying to reinstall the print heads and I tried the suggestion for the Z6100

  Nothing I've tried has been able to clear this loop. Is there a way to do a hard reset, then insert the PH as new? Or is that what makes the above method? Right now, I'm off the printer and the print heads on.

  Any help would be appreciated massively, I had to do this thing up 3 flights of stairs and still have not actually seen print!

  Remove all the ink cartridges and the print head if you don't have it already. Turn on the plotter and you will be asked for supplies, don't know if the ink cartridges and printheads first. When it asks to insert the items one at a time and the blinking icon must return to solid. Maybe your have one or several heads wrong causing the problem. If it rejects a print head print head must be indicated on the display as to which one is causing the problem.

• Model slide images won't load is not properly when previewing or when published

  I created a template of slides (including images) to be the background of my room.  The image looks good when I'm in Captivate, but when I saw the project the image is not displayed entirely and not displayed brilliant white gloss.  I tried the publication to see if it would make a difference, but nothing.  I use a jpg image.

  If someone has encountered this problem or someone has any ideas how I can get the image to display?

  Thank you

  Jodie

  What is the quality of the slide? Default setting is low (8-bit), depending on the quality of your JPEG image is possibly too low. Try changing to High or optimized and see if it's better.

  Lilybiri

• Our AppleTV alcoholic, if we opt for a movie / TV that was bought, we get the notice that it is "impossible to load the content. You need to restart completely to access the content you've purchased.

  We have the AppleTV (4th Gen, 64 GB). Whenever we 'wake up' the AppleTV from sleep, we are unable to access all our content purchased until we start the system. We have never had this problem until a few weeks ago. All software is up-to-date and automatically update, internet is very good, and nothing has changed since we have implemented the AppleTV. Frustrating to not be able to access the content that we have already purchased without jumping through hoops.

  Hello

  I met this time. All I did was to completely close the application TV Shows and reopened. It worked after that without needing a reboot.

• Receive error message - the user profile service has no log on. Failed to load the user profile. -How can I fix?

  I CAN NOT LOG - ON

  I AM THE ADMIN, BUT I CAN NOT CONNECT ON THE ERROR MESSAGE IS - THE USER PROFILE SERVICE HAS NO OPENING SESSION IMPOSSIBLE TO LOAD THE USER PROFILE... HOW CAN I FIX?

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Unable to load the WSDL (was: that's my problem)

  Impossible to load the WSDL. If there are currently online, please verify the format of the WSDL and URI file (http://www.adobe.com/cfusion/exchange/exchangedwwidgetsfacade.cfc?wsdl)

  Answered by your double post here: Impossible to load the WSDL. If there are currently online, please verify the format of the WSDL (http://www.adobe.com/cfusion/exchange/exchangedwwidgetsfacade.cfc?wsdl) and the URI

• When I try to load a program (coreldraw) it appears impossible to load error: 998.

  Original title: Erreor 998!

  When I try to load a program (coreldraw) it appears impossible to load error998! Why is that happening and how can I solve this problem?

  Hello

  1. which version of the Windows operating system that you are using?

  2 have had any changes made to your computer before this problem?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  For Windows Vista and Windows 7:

  You can follow the article to find the cause of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  For Windows XP:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  For more information, you can consult the CorelDraw support link and check if it helps:

  http://CorelDRAW.com/forums/t/33616.aspx

  
  NOTE: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  
  You can also contact Corel draw support for assistance:

  http://CorelDRAW.com/forums/

  I hope this helps.

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Have a program in which a sub front vi appears when loading the vi main

  I have a strange problem.

  • This problem takes place only after construction of an application using LV 8.6 Application Builder Professional version, and I installed it on the target computer. It occurs when you run the development system.
  • When I load the program on the target computer, one of the panels before Subvi used in the application appears at the top of the façade of the vi main.
  • The Subvi should never appear on the front panel at any time during the exicution program.
  • It happens to be Spreadsheet.vi writing that belongs to the standard library of vi.
    • I checked all calls to this sub - VI to check that there not be changed to make it load or appear when loading of the vi main.
    • It is called 4 different times during the exicution program but in no case is it set to display the front panel.

  Someone has seen this and if so what was the solution?

  Problem solved.  I copied the writing to Spreadsheet.vi from another computer.  Then, I went into the program and replaced vi in each place they called him.  The program now works as expected.

• "When I tried to sign on the computer, I get the following message: the user profile service service failed connection, failed to load the user profile.

  "Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please

  Go to Safe Mode and do a system restore. See the link below:

  The user profile Service has not logon. User profile cannot be loaded
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8

  Follow the links on the post.