help move a .tiff file

Similar Questions

• When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance

  When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance

  You must set the source patch:

  

• I opened a high-density .tiff file in photoshop, but I can't move the object

  I opened a high-density .tiff file in photoshop, but I can't move the object

  Chances are that the image is the same size as the document. You can either add Web Image > canvas... size , use the crop tool and do drag outwards to create more space, or reduce the size of the image ctrl-t or command-t then scale the image inward.

• Need help, move, or delete the file hiberfil.sys and pagefile.sys to reduce the free space in C: drive

  Original title: need assistance to move or delete hiberfil.sys and pagefile.sys

  Is there anyway I can move or remove 2.43 GB hiberfil.sys and pagefile.sys 4.39 GB in a defferent drive because I'm running out of space on my C: drive?  They take so much space.

  See this tutorial to move the swap file, however, I recommend have at least a 900MB

  pagefile on the C: drive to allow the creation of a dump in case of problems with the system file.

  http://www.Vistax64.com/tutorials/132201-virtual-memory-paging-file-change.html

  To delete the hiberfil.sys, you must disable hibernation. It cannot be moved.

  http://www.SevenForums.com/tutorials/819-Hibernate-enable-disable.html

• Windows 7 does not allow me to associate the program suitable for a .tif file but a .tiff file? Help, please

  Whenever I try to pick my file association for .tif file to open with windows Player 7 will allow me to open the file once, but do not allow me to set it as the permanent, even if program brava reader is defined as the ongoing .tiff files of brava? Everyone is not how to solve this problem?

  Hello J.burnett,

  I advise you to only consult with the support of Brava, because I've never used their player. I'm just relaying information on their Web site.
  Sometimes a program install and work but not all of the components work correctly, if it's not compatible.
  Brava support would be the ones to give you the most recent information.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• With the help of 'Modify the Original' on a tiff file PS creates still another copy in Lightroom - is this normal?

  Hello

  Just tackle LR - round-trip PS and I'm a bit confused so thought I'd check here.

  What we want in LR is more of a raw file simple tiff file edited in PS - and if we open the tiff already edited in PS again, the file is replaced just when PS saves.

  Looking at the descriptions/options when we're going to edit already edited tiff, 'Edit the Original' looks like this will be repeated, but instead, we are left with two TIFF edited in Lightroom - does that mean that every tweak in the PS will result in another file in LR?

  Pointers would be much appreciated.

  See you soon

  Actually, for once that we certainly had edited TIFF two in LR - but after the back and forth a few times, we now see a PS edited tiff in the library - maybe the film took a few minutes to update?

• Need help to move a project file containing...

  So I was working on my computer of friends a little and had a whole project done in CS4. I had to restore his computer and so I moved the folder (which contained all THE stuff of project including render files, etc.) to my computer. Now when he is on my first computer can't find the files and I have manually search all files of 100 or more. Two questions/problems:

  1. If I moved the folder (that was on the desk) which contained what first needs including render files, why he can't find clips? Even if it uses relative locations if she shouldn't be able to locate everything if the folder is placed on my desk?

  2. it says «can't find _.» So I find it manually, but then he jumps the rest of the clips and leaves me not find more than one. What should I do?

  Adobe does not use relative file locations. It uses absolute locations. So to move all the files, the drive letter and the entire directory structure must be the same. From the looks of it your storage space was not very organized, if PR cannot find a file and then asks for the location of the next file. Result in an organized way, PR would only need the first file and can then find all the other files automatically.

  By far the best way out is to use an external drive, which received a letter from fixed drive in disk management, and copy all the relevant files of your PC friends on this disc. Go home, and then use this external drive for your project. (Note that this external must be preferably an eSATA disk, not a USB drive).

  The alternative is to get things organized with regard to the absolute file locations. It may take some time, but it is worth it and has been a lesson for the future do not use "Desktop" to locate your files.

• Printing multiple pages to a TIFF file multiple using Windows Photo Viewer

  Original title: printing problem with a tiff file

  Hi guys

  How can I print 2 or 3 leaves only out of 68 pages in TIFF file when I open with 'Window Photo viewer'?

  When press "print", it appear just 'paper size', 'quality' and 'paper' only!

  Please kindly teach me to turned the pages I need.

  Waiting for your reply or response!

  Hello

  You did not mention the version of the operating system that is running in the computer with the problem. We know the version of operating system on this computer.

  Windows Photo Viewer application allows you to view multi-page TIFF files, but it does not allow to print a number of pages in a multi-page TIFF file. In order to achieve this functionality, you can have a look at the workaround solutions provided in the answerin the following threads:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-print-only-one-page-in-a-multiple-page/737b4afc-0D0E-4cb8-8374-f6de218720b2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-and-multi-page-TIFF-document/b5cf2c8d-d4a0-49f8-A674-fdc6b3d200c1

  (Note: in the link above, a third-party program is proposed as a workaround.) Please keep in mind that using a non-Microsoft program is at risk of the user and for all the problems arising from the use of these programs, the user must contact the manufacturer of the respective program)

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-7-How-do-i-print-only-selected-pages-in-a/9b0d846c-C765-E011-8dfc-68b599b31bf5

  I'm not one of these workarounds should help you. If you still need help on the question or with Windows, get back with more details and we will be happy to be of assistance.

• I'm fighting in a tiff file import

  Hello

  I'm working on the solar cell as my final year project and I have to use LabVIEW. I need to import the image into the LabVIEW, are these tiff images. files. I use NI-IMAQ for it and made a VI and there is no error, but still it does not show the image on the screen of the control panel. I enclose my VI. Please help me in this matter.

  Thank you

  Concerning

  Jawad

  Dear Jawad.Zafar,

  I hope you are well.

  I took a look at your request and did a bit of work on your code so that it can display your image on the front panel.

  There were only a few minor changes needed to get the code to work.

  First, you use the incorrect "IMAQ Image and Info Vision reading" function. This product error-1074395989 (impossible to read).

  You should only use the function 'IMAQ read the file '. It reads almost all types of image, such as PNG, TIFF files, JPEG etc.

  Once I did this I found another error; error-1074396080 (invalid Image Type) on the 'Get Tetragon' function. This is because the "Image Type" control is set to "Grayscale (U8)". This type must match the type of image that is specified when the first "Create an Image" function Levels of gray (U16). Once I changed the correct type, the code executes without error.

  I also suggest putting a STOP command while your loop, otherwise you will constantly produce the image on the front panel and will never be able to perform another treatment.

  How to do this is use a function or and create a stop on the front panel control. This is connected to the terminal of the error of the while loop, change to a terminal of the judgment. This way if an error occurs or if you select the stop command, the program can be stopped.

  I've included a modified copy of the code with this post.

  I hope it's useful for you and the rest of your application right.

  Kind regards

• Why is it written in tiff files slower than writing to AVI?

  I'm having a problem of capture and video recording at high speed.  I have images of size 2448 x 2050 x 8 bit, which are absorbed at 15 fps.  I can successfully write this record as an AVI uncompressed in labview, and don't miss all the frameworks for the length of experience (5-10 minutes).  However, I prefer to write individual images in uncompressed tiff files and were so far not managed to get the same performance.  Y at - it a reason that writing to the tiff format is inherently slower.  Anyone have any suggestions to improve the performance?  With writing tiff, I can get 8 to 10 fps.

  I have attached a picture of my code with tiff wrote in place (basically just avi version replaces "write file" with "avi write framework").

  Any help is appreciated.

  Ken

  I assumed that the cause is the overhead involved in opening and closing of each TIFF file, you write that you open the AVI file once, write in to several times, and then close.  If you really want them in TIFF files, you can always convert them in post processing.

• How to move or copy files from 'My music' on an external drive?

  Changed title: moving files with xp safe mode.

  I can only open my computer xp in safe mode. I have an external hard dr. Is there a way I can move or copy files 'My music' to the Dominican Republic hard.

  Thanks in advance

  Ron

  Do you still need help?  Others have given good advice.

  Changed title: moving files with xp safe mode.

  I can only open my computer xp in safe mode. I have an external hard dr. Is there a way I can move or copy files 'My music' to the Dominican Republic hard.

  Thanks in advance

  Ron

  Yes, normally you can use an external hard drive in safe mode.

  Boot to safe mode and open Windows Explorer (double-click on my computer).

  You should be able to see the external hard drive, should be the letter E: or F: depending on how much other disks you have.

  You need to find the folder where your Itunes Music is maintained.

  "In Windows XP and Windows 2000, click the sign more next to the folders and drives to navigate. The default location is

  \Documents and utilisateur\Mes Documents\My Music\iTunes Settings\nom.

  http://support.Apple.com/kb/HT1364

  From there its all just find the folder, copy and then navigate to your external hard drive and paste.

  I tried to locate the itunes library file to try to move it, but couldn't move anything to my external dr (h) he brought under options in safe mode

  You should not try to boot from the external hard drive if that's what you do.

  Hope this helps

  -Rich

• You want to move the $NTUninstal files to another hard drive?

  Windows uses 9.8 GB to 40 GB hard drive, I can move all the files from $NTUninstal on another HDD to make room?

  Hi John726,
   
  Here's a similar post on this issue. Check if this may help you:
  equivalent $ntuninstal

• Fax Viewer and Windows image. Made some changes to the .tiff file, but unable to see them on the Windows 7 machine

  We imaged .tiff and we scored some changed in the Viewer windows fax and photo of XP Machine and we are not able to see the change made in Windows7 machine. Can someone help with this.

  No guarantee... but maybe you can view your TIFF files in the Windows Photo Viewer:
  (right click / Open with / Windows Photo Viewer)

  View and use your pictures in Windows Photo Viewer
  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer

  (Note: If the TIFF files are several pages only the first page can be displayed with Photo Viewer Windows)

• timing issue with cruzer blade SCDZ50 - 008G: cannot move all the files from the PC to the USB

  I accidentally deleted this file synchronization that was in the main folder of the USB. now I can't move all the files from the computer to the cruzer blade. I can't find where to download it online. Help, please!

  Too bad. found this

• Error when you try to open a Windows Movie Maker. MSWMM file: cannot be opened because it is not a valid windows movie maker project file

  Help! Says the file can't be flat, .mswmm file, but the program made the film.

  I used the Windows to make a film, I scanned 458 pictures, done my book of stories, etc. with music - took a month... I "published" and now when I go to open it it says ' cannot be opened because it is not a valid windows movie maker project file? But the Director did, now I can't open it to all, it has an .mswmm file extension! Help, it's a gift for my dad who is going to be 70 and I have not yet a month to make it again!

  Hi, I'm having a similar problem but have 1 idea as to why I can't open my .mswmm file. I have two xp machines running sp3, but a pro and a home edition if it matters.

  the file.mswmm I am trying to open was created on the moviemaker version 2.1.4028.0 and it still works fine on this machine. On the xp pro machine, he is Director of windows 2.1.4026.0.

  So I try to install the movie maker 28 to my other machine I have a lot of files created with the 28 I want to be able to change on the other computer.

  =============================================
  The project .mswmm file is best to use the system that created
  because it takes all the source files... Video clips, Photos, music
  files... always be available at the original location.

  Moving from one computer to another can work if you move as best
  all of the source files. When you open the .mswmm file you will see
  Xs red instead of thumbnails of the source but if you right click the red Xs
  You should be able to navigate to the new location of the files sources and re-
  establish the path.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.