Help needed immediately.

Similar Questions

• Please can someone help, need password CNU9497P2C

  I have the same problem and its driving me crazy... I need the BIOS password because I can't access to this

  [number of Series edited by Moderator]

  Please can someone help, need password

  HP MINI CQ10

  Sweb try.

  e9lovox27e

  3rd letter tiny L.

  4th and 6th letter lowercase o.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• help needed ASAP start problems. left me speechless.

  I have a windows xp computer HE I started to remove some waste to and remove programs I didn't need to use and when I went to restart it gets asfar as page talk to me about my processer then hold. have a boot cd and am happy todo a total system files but the iot wont even let me into safe mode? tried to boot the computer and pressing each of the F keys during the power upward and nothing does. When I press f6 or f8 it s a beep and a try several times before he arrives at the black screen with preocessor details and then crashes again. any help would be appreciated. Thank you.

  "jmclellan" wrote in message News: e8b3e599-5442-407 d-9ba5-36a345b060b2...

  I have a windows xp computer HE I started to remove some waste to and remove programs I didn't need to use and when I went to restart it gets asfar as page talk to me about my processer then hold. have a boot cd and am happy todo a total system files but the iot wont even let me into safe mode? tried to boot the computer and pressing each of the F keys during the power upward and nothing does. When I press f6 or f8 it s a beep and a try several times before he arrives at the black screen with preocessor details and then crashes again. any help would be appreciated. Thank you.

  The beep is normal - is it not? Most of the machines beep when they arrive at the end of the routine POST - usually just a single beep out. Any other type of beep seems to indicate a hardware problem (in your case, you can make the machine think that there is a stuck key).
  You need start listen than the F8 key immediately the beep occurs - earlier, and did not finish the routine PowerOnSelfTest the BIOS and will not take the combination of the key - to enter in Safe Mode.
   
  Usually at the end of the routine of the POST (which I think is the screen that you speak), machine will put something like
  "CD: boot sector search '"
  What is the last two lines on your screen when it is at a standstill?
   
   
  
  --
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• HP 15-af159nr: HELP need Network Controller, Win 7 64 bit, impossible to find, 15-af159nr

  For some reason I can't find a specific for this laptop network driver. Miss me the network controller and I tried so many drivers but can't find. Please if anyone can help that would be great! It is a win 7 64-bit, network controller driver, the hp 15-af159nr. It is the tactile energy star hp laptop.

  Hello:

  According to the list of parts for your laptop below, it comes with an adapter Broadcom BCM43142 802.11 b/g/n 1 x 1 Wi - Fi and BlueTooth 4.0 m2 combination WLAN.

  http://PartSurfer.HP.com/search.aspx?SearchText=P1A98UA

  These would be wireless and bluetooth, drivers that you need for this model of the wlan card.

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated into laptops supported that run an operating system supported.

  File name: sp70888.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp71440.exe

• Help needed recovery for Equium A300D - 13 X

  Hi all

  Having experienced too many problems for the list with my satellite a 300 d 13 X, hardware and software, I decided to go ahead with a restore to the factory settings.

  My first step was to create 2 discs recovery DVDs, using the Toshiba Recovery Disk Creator.
  As far as I know, two recovery disks were created with success, insofar as the recovery disc creator has stated as such.

  Not knowing what step to take next, I started the laptop with the fist of the disc in the disc drive, two thinking recovery that it would reset the laptop to its factory settings, but it does not.

  Now, when I start the laptop, I get the following message;

  BOOTMGR is missing
  Press Ctrl + Alt + Delete to restart

  who restarts the laptop showing the above message again.

  By pressing F8 at start up does nothing.

  By pressing F12, multi boot selection, reveals a start with 3 options Menu;
  HDD1: TOSHIBA MK2046GSX-(S1)
  CD/DVD: MAST * ADVD-RAM UJ - 850 S-(PM)
  LAN: Marvell Yukon 88E8040T

  If I select the CD/DVD option, a black screen with the text;

  Windows is loading files

  is shown. I am guessing it is the correct path to recovery.
  However, after the screens following recovery about the language selection utility etc., a text filled with the dialog box

  X:\windows\systems32\cmd.exe

  Cross, but eventually reached a static state line:

  Copy of F:\06948XSP.swm to V:\HDDRecovery\SWImg 1/6

  without to successfully complete the recovery process.

  Any help to fix this would be greatly appreciated.
  Kind regards
  KeV.

  > My first step was to create 2 discs recovery DVDs, using the Toshiba Recovery Disk Creator.
  > As as far as I know, the two recovery disks have been successfully created, insofar as the recovery disc creator has stated as such.

  What to tell buddy you've done everything right.
  The recovery disk was created successfully (you saw a message saying this?).
  Boot from recovery disk should start the collection procedure and you must follow the installation on the screen.
  Usually, this should work.

  The error; BOOTMGR is missing says that boot manager on the HARD disk has been removed and it of not possible to boot from the HARD drive.
  You must boot from the CD you have done; by pressing F12 choose CD/DVD drive

  Try to format the HARD drive using another CD of Windows.
  In this case, you need to set SATA compatibility mode in the BIOS, then you could boot from the WinXP CD.

  After that try the recovery disk again

• HP Pavilion Notebook - 17-f207: Please help-need driver

  I need driver for

  HP Pavilion Notebook - 17-f207

  hardver id is:

  ACPI\VEN_ASD & DEV_0001
  ACPI\ASD0001
  * ASD0001

  Thanks for the help

  S

  Hello:

  I zipped and attached to the driver that you are interested in below...

  Download and uncompress the file in its folder.

  Don't do anything with the files in the folder.

  Go to Device Manager and click on the device ACPI\VEN_ASD & DEV_0001 who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Restart the PC.

• Help needed interview about a series of Satellite Pro S500-C11

  Hello to all readers,

  Computer problem laptop Satellite Pro S500-C11 series.

  My wife, age 82, died last month. I have his cell phone in front of me with an apparent hardware failure. If I touch the bottom left of the laptop open, while entering text, the cursor jumps all over the screen and the text becomes garbled. I think my left hand wrist needs rest momentarily on the space to the left of the cursor buttons.

  I have some details on the purchase of the guarantee in the form of a contract number: FF5D900C with what I think is the registration number: 1 048 * H.

  The age related hearing problems I have trouble using the phone in an effective way. Is there anything I can communicate with the Service Center Online, please?

  Any help will be greatly appreciated.

  Hello

  Respect! Yet in sufficient form to use computers
  In General if your equipment begins to malfunction, the authorized Toshiba maintainer would be able to solve this problem.

  I don't know if you can contact the ASP mail, but first you must find the ASP in your country of m.
  Here you can find all of the ASP based all over the world:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

  By the way: try to disable the touchpad while typing... you can turn off this Fn + F9 help
  In my case, the cursor jumped because I accidentally touched the touchpad while typing...
  Maybe it helps...

• Satellite 4090XCDT - Memory Upgrade help needed

  Hello reader,.

  I own a Toshiba Satellite 4090 XCDT notebook and it came originally with windows 98SE and 64 MB of ram, but I installed Windows 2000 pro and I need to upgrade the memory, I did some Google research on the specs of this laptop and found that this machine is capable of 192 MB of ram , but there is one memory slot, how is possible to get this upgrade when require sticks of memory 128 + 64 = 192 MB, that would mean I'd need two memory sticks to reach the range of 192 MB, from what I see here is therefore the only memory of memory bank.

  Could someone please point me in the right direction and provide me a solution to my problem, any help will be greatly appreciated.

  Cheers MagicBytes :D

  When the memory is empty, the amount of memory is reported?

  If its 64 MB, then you simply install a 128 MB module to achieve 192 MB

• Help needed-bad in compaq 6910p chart

  Dear friends,

  Need support & help, I have Compaq 6910p with Win xp-2, in my laptop there are a few question in graphics.there's background blue & all videos showing bad pixels, I format operating system, reinstall the graphics drivers + updated bios version F.19.if inti any good idea trying to help me...

  Thnks

  Hello

  also update video codecs

  Check external monitor - if everything's ok, this means that your screen is broken

• Need help, need drivers for HP Pavilion a6202n Desktop PC vista for XP

  Hey can guys, someone help me? I have a HP pavilion a6202n Desktop PC and need the drivers for XP

  Install the chipset driver and RESTART.

  Then install all other drivers.

  NVIDIA nForce 430
  http://www.nvidia.com/object/nforce_winxp_15.24.html

  graphics card driver: NVIDIA GeForce 6150SE
  http://www.nvidia.com/object/winxp_181.22_whql.html

  Audio: ALC888S
  FTP://152.104.238.19/PC/audio/WDM_R214.exe
   
  If necessary:
  LAN Realtek RTL8201N
  http://tinyurl.com/2ca284

  .NET 1.1 (for keyboard)
  http://tinyurl.com/4y9vv

  Original HP multimedia keyboard/mouse drivers
  http://tinyurl.com/ywpftx

  Message edited by dmhoo29 on 08/02/2009 15:52

• Jet Office NP 2542: help needed please

  Hi there and thanks for reading.
  I do a university course and stay in student accommodation which benefits from a wireless network. I do my work on an iPad, so today, I went out and bought a hp office jet 2542 so I can print the course.
  I can't get the * beep * thing connected at all. The blue light continues to blink at me. The iPad is the printer ok and I printed a test page but I am puzzled any advice would be appreciated. Thank you
  Jen x

  Hello @jross6988,

  I understand that you are having problems when you try to connect the all-in-one printer HP Deskjet 2542 to your university network to enable wireless printing. I would like to help you today to this question. Now, just if you are aware, because it is a quality consumer printer it is supported only on home networks and is home to the office. The printer responds better on a core network with just a router and up to 10 devices connected to this network. You are in a University in the network is going to be much more advanced. He'll also probably switches and installation of network servers that can cause problems with communication with consumer products. Printers require some ports to open and compensation on the network so that the printer should not be considered a threat attempts to access the network. Therefore, a large part of the network of troubleshooting is to powercycle the router and ensure that certain ports and settings are configured to enable a printer communication. Chances are, you will not be able to follow these steps because COMPUTING at school will have control over this vast network. That being said, I have a few things for you to try.

  Step 1: Confirm network settings:

  When you run the Setup wireless using the USB cable on your computer, the program installation will usually gather information your computer network to set up the wireless on your printer. This means that your computer must be connected to the University network.

  • Make sure that the network is 2 GHz and 5 GHz not. Printers are not supported on 5 GHz networks
  • Make sure that your computer is not connected to a network of comments
  • Network password is case-sensitive. If you are prompted to type to ensure what you type into it exactly.
  • Needs to be disabled on the router MAC filtering
  • The multicast must be turned on on the router
  • Hello must be enabled on the router
  • The following ports must be open:
  • The incoming Ports (UDP): 137, 138, 161, 427, 80, 443
  • Coming out of Ports (TCP): 137, 139, 427, 9100, 9220, 9500, 5222 5223

  These parameters will have to be confirmed by the IT Department, if you do not have access to the router.

  Step 2: Configure the wireless:

  Because it is a base model printer, it doesn't have a front panel wireless configuration option. Therefore, you rely on a Windows or Mac computer to configure the wireless. You will need to have a USB cable for the wireless configuration.

  Because I don't know what operating system you use on your computer, can please click you here. Once the support document opens, please select your operating system and follow the instructions to set up your wireless network.

  Once the wireless is configured on your printer, you check simply that your iPad is connected to the same network that your printer is connected to the and which will allow your printer to print from your iPad.

  If the wireless configuration is always a failure, due to the network, the other alternative would be to use Direct wireless.

  Step 3: Direct Wireless Configuration:

  Direct Wireless will allow you to print wireless from your printer without having to connect to a network. Enable you wireless directly on your printer. By doing so, your printer will now broadcast its own network name. At this point up to 5 computers, tablets, phones can connect to the network printers and can print directly to the printer. However, you will not be able to access the internet on your iPad and print on your printer at the same time as your iPad has only 1 card network which will be connected directly to the printer.

  If you want to use Direct wireless, you must install a print on your iPad application. Please click here for the application.

  After loading the application, touch button Wireless directly on your printer is able to walk. Once the Direct wireless is enabled on your iPad select to connect to a new network. Under the list of available networks, you will see your HP Deskjet. To connect to this network, and now you'll be able to print. Yet once, this function will not work unless you are connected to the network printers which means that you are not able to go on the internet at the same time.

  This is the button wireless directly on your device:

  

  Unfortunately, printing on large networks, as this university network, is almost impossible because the school most likely won't be unwilling to give to your permissions to print to the network printer.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Universal wheel Racing game for PC help needed

  LM571 universal Racing Wheel made by Hip Interactivwe which is no longer active. I can't get the game running on my PC for the G'kids. I need help I can get.

  Hi ninklink,

  1. who is the edition of Windows that is installed on your computer?
  2. What is the name of the game?

  Not found no information on the device to the Vista Compatibility Center or the Windows 7 Compatibility Center. This means that the unit may or may not be compatible.

  To find out if the device is compatible with your windows, we recommend to contact the supplier of the device for more support options.

  To work around the problem, you can install the device driver in Windows XP Service Pack 2 compatibility mode and check if the device works fine on your computer.
  See make older programs run in this version of Windows

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Color LaserJet Pro: Help need driver for Mac Yosemite 10.10.2 for LaserJet Color Pro...

  Please help me find the driver for HP LaserJET COLOR PRO 200 for MAC OXC 10.10 YOSEMITE

  This should be what you need

  Driver for OS X 10.9 Mavericks and OS X 10.10 Yosemite

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=LJ-125410-4&cc=us&DLC=en&LC=en&OS=4182&productOid=5097639&sw_lang=

• Need help, need to install the SSD Samsung 830 on my HDX16T

  I have a laptop HP Hdx16t Entertainment, and I was wondering if someone can explain what I need, or how to install until I open it myself. Right now all I have is real laptop and the Samsung 830 256 gb SSD. Do I need other cables of? or the disk hard is just snap? It's an easy task? I have never replaced one of front. Any help would be greatly appreciated. Sorry for my noob question.

  Hello:

  It should be pretty easy to do it yourself.

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01612461.PDF

  See Chapter 4 for R & R procedures.

  You must transfer the material from the original to your new SSD (caddy, connector and screws).

  Paul

• Help needed abt Bios... Please Im using Hp Compaq 6910p...

  Hey every1 I'm on Hp Compaq 6910p with OS Windows 7 Ultimate 32 BIT... The bios of my laptop are more then 2 years... The bios Version and the date is (Hewlett-Packard 68MCU worm. E.17, 02/11/2008

  I wanted to update my bios version and went on HP websit for the latest drivers for my laptop and there I saw nothing abt bios for Windows 7... as windows XP, Windows Vista, and Windows 2000 are of concern, all have mentioned bios column and hav a bios update prior to the last F.19 F.17, July 6, 2010... the bios starts same windows en all these 3... but there nothing abt bios en WWindows7

  Please tell me what could be... .should I install the update of the bios that are quote en Windows XP, Vista and 2000? because I am on Windows 7 and there is nothing mentioning bios abt it... Please help... you can check it out here

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3357378...

  Hello:

  Not only your 6910p can run a 64 bit OS (if the processor T7300 or higher), it can also work with 8 GB of memory (2 x 4 GB of PC2-6400).  Features of HP say that maximum RAM is 4 GB. Not so!  The PC is out before the chips of memory 4 GB PC2 were widely available. The Intel 965 chipset supports up to 8 GB of memory. Finally, I installed 8 GB of memory in my 6910p C2D T7300, running Vista x 64, so I know it works.

  Windows 7 was not a native operating system on your machine. DO NOT FLASH the BIOS if you are under W7.

  All flashes BIOS 6910p are written for XP or Vista. Using the flash-based Windows in Windows 7 can kill your laptop dead.

  In addition, not directly Flash to the latest version, if you decide to Flash the BIOS on XP or Vista. You will get an error. Flash to the next version before all first, and then you can flash to the latest version and get no errors.

  As others have posted, there is no real need to Flash the BIOS and no BIOS flash will make changes to the usable memory.

  When you install a 64-bit operating system, you should see more of available memory.

  Paul