[Help] Number of user interface

Hi all

Please help me to solve my problem.

I want to display a text field and a button on a single screen. Once the text field is completed and the button is clicked, it should display a result. The result should be displayed on the screen but the textfield and button in the first screen should not be displayed again.

In my State, the result is displayed and if the textfield and button. I confused, I should do it in two screen or what?

Thanks for help.

Ok.. You have a MainScreen (mainScreen) in which the following fields are added

* entryTextField

* entryButton

A button you add the resultTextField to the screen to help

mainScreen.add (resultTextField)

or simply

Add (resultTextField)

Use method before the method add() remove...

Delete (entryTextField)

Delete (entryButton)

See you soon...

Edit: Is in edit mode, when validating BBDeveloper... deleteRange is also a good idea...

Tags: BlackBerry Developers

Similar Questions

Number of user interface

Hi all! I'm developing an application where there is a bar on top, it has a few buttons and must always be present in all screens.

I develop my user interface entirely in the PRC, is there something like a custom control that I can use RPC?

Yep, sounds to me like the OP is perhaps trying to reproduce the provision of an Android version of their Putting buttons approx. above as this is a violation of user BB10 interface instructions and is strongly discouraged. If nothing else, it would make the application built for BlackBerry certification from the outset.

PBernhardt wrote:

Why do you think these buttons on the top? In general, the buttons in BlackBerry should be in action on the bottom bar, to make it easy to do what they gave.

Develop the user interface to CS6 Plugin - which produced required Adobe?

According to the development of the CS6 Illustrator SDK documentation, the only way to achieve platform-independent UI is the use of the flash or flex.
I have to develop a plugin for AI CS6 for windows and Mac. Adding native controls is restless and too much time.
The flex mxml seems relatively simple and fast (taking into account the time of development). That's why I chose flex as the UI component for my plugin.
1. to use flex UI, I'll need to add all of the user interface in a mxml + actionscript compiled into an Extension of the AI (zxp file).
2. all my business logic will remain in C++ which I believe will be platform independent.
The SDK documentation confuses me in that all Adobe products are required to develop the flex user interface extension.
1 adobe Extension Builder 2.1 (to generate the zxp file)
2 flash Builder 4.5 stand-alone (is different from flex builder )?
3 CS Creative Suite SDK (what is different from the THE CS6 SDK)?
Which are optional and that mandatory for flex UI designig of AI plugin?
I am a developer C++ and new to flex. So please ignore any declaration of amateaur above.

DataSet wrote:

Another question, we cannot use MFC / UI for AI plugin Windows activeX controls? We can at least get some help with the user interface infrastructure standard darg-drop.

CreateWindow() is real pain.

Yes, you can use MFC, but it makes your windows plugin only.

QT and wxWidgets have user interface designers and is cross-platform.

Is there a way to change the number of Sockets of Test, the User Interface of CVI?

I would like to have the number of sockets in an INI file, the User Interface would be read the value of the file and set the number of Sockets of Test. I know that it is possible by adding a callback sequence, ModelOptions, to my files in sequence and by changing the setting. How would you do it in the UI?

You might have the user interface to read and edit the reportoptions config file as the process template (see the source code for modelsupport2.dll in \Components\Models\TestStandModels). But why do you need UI to do this? Why not simply substitute the recall of ModelOptions and he do there?

-Doug

Help me with my user interface Simple Design

HI everyone I'm new to BB development...

So I want to develop a simple application... When everything works except user interface design...

The problem is the following

My Ui should have two tabs or (buttons... addbutton and ListButton) where after clicking on the first button

the content of the "addButton" must appear for example. labelfIELD, CHEXKbOXfIELD, button...

And AFTER, by clicking ON THE "ListButton" it should display the content of the "ListButton" button for example.

LabelField and editField in a horizontal way... and all by posting the content of the button eachg the

content of the dedicated back button should be deleted...

Please help me I need very urgent...

And if possible send me a link through which I can easily learn from user interface design and plants athe Ui using "Threads".

Thank you

Sharath

The first place I'd start is the sticky post on this forum:

http://supportforums.BlackBerry.com/T5/Java-development/useful-links-for-novice-and-experienced-Prog...

Then I would go to video library where you can 'see' how the UI code, but it was certainly a little more:

http://NA.BlackBerry.com/eng/developers/resources/VideoLibrary.jsp#tab_ddetail_subtab_jde

Last but not least:

http://www.thinkingblackberry.com/archives/category/UI

Now regarding your problem of button, you can do an add() and remove() to switch your two fields to emulate a tab container or use the following example:

http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/How_To_-_Create_tabbed_view_screens.htm...

Shell of the user interface: generate a new TAB within the area with the help of a binding element.

Hello Oracle Community:
I work with an application based on the model of Shell user interface design.
My use case is
#1: start a tab Dynamics from the Navigation pane.
#2: tab loads in the local area. (this works as expected, pictured below)
#3: launch of the additional tabs in the page loading in the step #2. They are triggered by simple links on the .jsff page. (this does not work - please help. This should work? If so, what missing am me?)
Question : Can I launch a new tab from a link component in the local area (page .jsff)?
As you can see I have links on my dashboard and I want that they engage in new tabs when you click. Please test before responding "in theory".
Here's how this link is setup.
Here is my error logs.
[15: 05:23] Application deployed successfully.
[15: 05:23] the constriction of context following URLS have been defined and can be used as a starting point for testing your application:
[15: 05:23] http://192.168.1.154:7001 / MyAST
[15: 05:23] for deployment time: 18 seconds
[15: 05:23]-deployment is complete. ----
Run start time: 18394 ms.
[MyAst12cUpgrade of the application currently running on IntegratedWebLogicServer]
URL - target Http://127.0.0.1:7001 / MyAST/faces/Login
15:05:23.891 [ExecuteThread [ASSET]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] c.a.view.utils.MySessionListener DEBUG - # present Session created: xP0oqsMzARHojfj6kJ-MJGW53jzYWYI2swzTPA_zyG6yHi30HJZb! 1821648284! 1439496323891 on Thu Aug 13 15:05:23 CDT 2015
< org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl > < ViewHandlerImpl > < _checkTimestamp > < TIMESTAMP_CHECKING_ENABLED_SHOULDNOT_IN_PRODUCTION >
< org.apache.myfaces.trinidadinternal.skin.SkinStyleSheetParserUtils > < SkinStyleSheetParserUtils > < _createStyleNode > < ALIAS_DEFINITION_NOT_STARTING_WITH_DOT >
< 13 August 2015 3:05:28 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,456 during the inactive configured timeout of 5 seconds. >
< 13 August 2015 3:05:28 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,460 during the inactive configured timeout of 5 seconds. >
< 13 August 2015 3:05:28 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,459 during the inactive configured timeout of 5 seconds. >
< 13 August 2015 3:05:28 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,457 during the inactive configured timeout of 5 seconds. >
< 13 August 2015 3:05:28 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,458 during the inactive configured timeout of 5 seconds. >
< oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl > < DiagnosticsDataExtractorImpl > < createADRIncident > < incident created 317 to key problem "DFW-99998 [java.lang.ClassNotFoundException] [oracle.jbo.pool.ResourcePoolMonitor.setLoader] [myAst12cUpgrade]" >
e-mail matched expression
15:06:17.305 [ExecuteThread [ASSET]: '5' for queue: "(self-adjusting) weblogic.kernel.Default"] c.a.view.beans.LoginBean DEBUG [email protected]
CustomAuthenticatorProviderV2.getConfiguration
CustomAuthenticatorProviderV2.getConfiguration options {}
Username CustomAuthenticatorHelper.login [email protected] password *
AstCustomSecurityProviderPlugin within the connection method VER #2, user name:[email protected] | newPwdEncryptFlg #N
loginSucceeded #true
CustomAuthenticatorHelper.lookupUserGroups for the [email protected] user
AstCustomSecurityProviderPlugin getUserRoles for user [email protected]
< 13 August 2015 3:06:23 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,535 during the inactive configured timeout of 5 seconds. >
< 13 August 2015 3:06:23 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,533 during the inactive configured timeout of 5 seconds. >
< 13 August 2015 3:06:23 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,531 during the inactive configured timeout of 5 seconds. >
< 13 August 2015 3:06:23 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,532 during the inactive configured timeout of 5 seconds. >
< 13 August 2015 3:06:23 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,534 during the inactive configured timeout of 5 seconds. >
15:06:26.343 [ExecuteThread [ASSET]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] c.a.view.beans.ResetPassword DEBUG - result = ##Y
< oracle.adf.view > < TreeRendererUtils > < renderDefaultContextMenu > < context menu child isn't a RichMenu >
< oracle.adf.view > < CellGatherCallback > < processComponent > < PANEL_GRID_LAYOUT_CELL_CANNOT_STRETCH_MULTIPLE_CHILDREN >
< oracle.adf.view > < CellGatherCallback > < processComponent > < PANEL_GRID_LAYOUT_CELL_CANNOT_STRETCH_MULTIPLE_CHILDREN >
< oracle.adf.view > < PanelGridLayoutRenderer > < _encodeAllOrVisitChildrenForEncodingImpl > < PANEL_GRID_LAYOUT_CIRCULAR_HEIGHT_DEFINITION_1 >
< oracle.adf.view > < PanelGridLayoutRenderer > < _encodeAllOrVisitChildrenForEncodingImpl > < PANEL_GRID_LAYOUT_CIRCULAR_HEIGHT_DEFINITION_2 >
< oracle.adf.view > < RichRenderer > < decodeUnknownKey > < ATTEMPT_SYNC_UNKNOWN_KEY >
15:06:37.902 [ExecuteThread [ASSET]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] c.a.view.beans.HomePageBean DEBUG -.
Here is the call of the navigation pane to create tab of the surroundings. It is successful.
# HomePageBean.invokeTaskFlow on the inside. About to fire with Params ActivityLauncher = Title: EDGE TaskFlowID table: /flows/homeTab.xml#homeTab NewTab: true
# Launcher._launchActivity () activity inside.
# Declaration of activity Launcher._launchActivity () - try inside
# Launcher._launchActivity () - newTab = true activity inside. Call for TabContext...
< oracle.adf.view > < TreeRendererUtils > < renderDefaultContextMenu > < context menu child isn't a RichMenu >
< oracle.adf.view > < CellGatherCallback > < processComponent > < PANEL_GRID_LAYOUT_CELL_CANNOT_STRETCH_MULTIPLE_CHILDREN >
< oracle.adf.view > < CellGatherCallback > < processComponent > < PANEL_GRID_LAYOUT_CELL_CANNOT_STRETCH_MULTIPLE_CHILDREN >
< oracle.adf.view > < PanelGridLayoutRenderer > < _encodeAllOrVisitChildrenForEncodingImpl > < PANEL_GRID_LAYOUT_CIRCULAR_HEIGHT_DEFINITION_1 >
< oracle.adf.view > < PanelGridLayoutRenderer > < _encodeAllOrVisitChildrenForEncodingImpl > < PANEL_GRID_LAYOUT_CIRCULAR_HEIGHT_DEFINITION_2 >
< oracle.adf.view > < RichRenderer > < decodeUnknownKey > < ATTEMPT_SYNC_UNKNOWN_KEY >
15:06:40.949 [ExecuteThread [ASSET]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] c.a.view.beans.HomePageBean DEBUG -.

Here's the same call from the local area. It fails without a throwing an exception.
# HomePageBean.invokeTaskFlow on the inside. About to fire with Params ActivityLauncher = Title: EOTM TaskFlowID: /flows/EOTM.xml#EOTM NewTab: true
# Launcher._launchActivity () activity inside.
# Declaration of activity Launcher._launchActivity () - try inside
# Launcher._launchActivity () - newTab = true activity inside. Call for TabContext...

< oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl > < DiagnosticsDataExtractorImpl > < createADRIncident > < incident created 318 to issue key "ADFC-00032 [ADFc]" >
< oracle.adf.view > < RichExceptionHandler > < _logUnhandledException > < ADF_FACES - 60098:Faces life cycle receives exceptions that are unhandled in phase INVOKE_APPLICATION 5 >
javax.faces.FacesException: #{homePageBean.invokeTaskFlow ('EOTM', 'EOTM_TASKFLOW')}: //C:/Users/tstrepek/AppData/Roaming/JDeveloper/system12.1.3.0.41.140521.1008/o.j2ee/drs/myAst12cUpgrade/ViewControllerWebApp.war/fragments/homeTab.jsff @25,111 action = "#{homePageBean.invokeTaskFlow ('EOTM', 'EOTM_TASKFLOW')}": java.lang.NullPointerException "
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:118)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)
at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:189)
at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:281)
at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:100)
at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:121)
at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)
at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:170)
at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:281)
at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:100)
at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:125)
at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
at oracle.adf.view.rich.event.ProxyEvent.broadcastWrappedEvent(ProxyEvent.java:72)
at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:124)
at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:111)
at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)
to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:168)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:510)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:171)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:115)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:794)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:1259)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:1074)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:402)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:280)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:254)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:346)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:192)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:105)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:502)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:502)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:327)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:229)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:137)
at java.security.AccessController.doPrivileged (Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:220)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3436)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3402)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2285)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2201)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1572)
to weblogic.servlet.provider.ContainerSupportProviderImpl$ WlsRequestExecutor.run (ContainerSupportProviderImpl.java:255)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
Caused by: javax.faces.el.EvaluationException: //C:/Users/tstrepek/AppData/Roaming/JDeveloper/system12.1.3.0.41.140521.1008/o.j2ee/drs/myAst12cUpgrade/ViewControllerWebApp.war/fragments/homeTab.jsff @25,111 action = "#{homePageBean.invokeTaskFlow ('EOTM', 'EOTM_TASKFLOW')}": java.lang.NullPointerException "
at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
... more than 73
Caused by: java.lang.NullPointerException
at com.astcorporation.view.beans.ActivityLauncher._launchActivity(ActivityLauncher.java:54)
at com.astcorporation.view.beans.HomePageBean.invokeTaskFlow(HomePageBean.java:417)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at javax.el.BeanELResolver.invokeMethod(BeanELResolver.java:780)
at javax.el.BeanELResolver.invoke(BeanELResolver.java:529)
at javax.el.CompositeELResolver.invoke(CompositeELResolver.java:257)
at com.sun.el.parser.AstValue.invoke(AstValue.java:248)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:302)
at com.sun.faces.facelets.el.TagMethodExpression.invoke(TagMethodExpression.java:105)
at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
... more than 74
< oracle.adf.view > < PartialResponseUtils > < handleError > < ADF_FACES - 60096:Server Exception during the PPR, #1 >
javax.servlet.ServletException: //C:/Users/tstrepek/AppData/Roaming/JDeveloper/system12.1.3.0.41.140521.1008/o.j2ee/drs/myAst12cUpgrade/ViewControllerWebApp.war/fragments/homeTab.jsff @25,111 action = "#{homePageBean.invokeTaskFlow ('EOTM', 'EOTM_TASKFLOW')}": java.lang.NullPointerException "
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:606)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:280)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:254)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:346)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:192)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:105)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:502)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:502)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:327)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:229)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:137)
at java.security.AccessController.doPrivileged (Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:220)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3436)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3402)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2285)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2201)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1572)
to weblogic.servlet.provider.ContainerSupportProviderImpl$ WlsRequestExecutor.run (ContainerSupportProviderImpl.java:255)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
Caused by: javax.faces.el.EvaluationException: //C:/Users/tstrepek/AppData/Roaming/JDeveloper/system12.1.3.0.41.140521.1008/o.j2ee/drs/myAst12cUpgrade/ViewControllerWebApp.war/fragments/homeTab.jsff @25,111 action = "#{homePageBean.invokeTaskFlow ('EOTM', 'EOTM_TASKFLOW')}": java.lang.NullPointerException "
at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)
at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:189)
at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:281)
at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:100)
at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:121)
at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)
at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:170)
at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:281)
at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:100)
at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:125)
at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
at oracle.adf.view.rich.event.ProxyEvent.broadcastWrappedEvent(ProxyEvent.java:72)
at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:124)
at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:111)
at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)
to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:168)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:510)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:171)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:115)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:794)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:1259)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:1074)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:402)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)
... more than 42
Caused by: java.lang.NullPointerException
at com.astcorporation.view.beans.ActivityLauncher._launchActivity(ActivityLauncher.java:54)
at com.astcorporation.view.beans.HomePageBean.invokeTaskFlow(HomePageBean.java:417)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at javax.el.BeanELResolver.invokeMethod(BeanELResolver.java:780)
at javax.el.BeanELResolver.invoke(BeanELResolver.java:529)
at javax.el.CompositeELResolver.invoke(CompositeELResolver.java:257)
at com.sun.el.parser.AstValue.invoke(AstValue.java:248)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:302)
at com.sun.faces.facelets.el.TagMethodExpression.invoke(TagMethodExpression.java:105)
at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
... more than 74

3 mods are needed

1.) change managed bean to "session."

2.) implement the following class of activity Launcher

3.) implement the following methods of the managed bean

-----------

ManagedBean

-----------

public String invokeTaskFlow (String Title, String taskFlowPropertyName) {}

String taskflowId = PropertiesLoader.getProp (taskFlowPropertyName);

AL ActivityLauncher = new ActivityLauncher();

If (TabContext.getCurrentInstance ()! = null) {}

setTabContext (TabContext.getCurrentInstance ());

Al._launchActivity (title, taskflowId, getTabContext(), null, true);

}

else {}

setNewTabContext (getTabContext ());

Al._launchActivity (title, taskflowId, getNewTabContext(), null, true);

}

Returns a null value.

}

-----------

ActivityLauncher._launchActivity

-----------

5 arguments: title taskFlow newTab, paramsMap, tabContext

public void _launchActivity (String title, String taskflowId, boolean newTab, card parametersMap, TabContext tab_context) {}

If (tab_context! = null) {}

setTabContext (tab_context);

}

try {}

TabContext currentTabContext = TabContext.getCurrentInstance ();

If (currentTabContext == null & tab_context! = null) {}

currentTabContext = getTabContext(); tabContext Set to validate

If {(newTab)

currentTabContext.addTab (title, taskflowId, parametersMap);

} else {}

currentTabContext.addOrSelectTab (title, taskflowId, parametersMap);

}

} else {}

setTabContext (currentTabContext);

If {(newTab)

currentTabContext.addTab (title, taskflowId, parametersMap);

} else {}

currentTabContext.addOrSelectTab (title, taskflowId, parametersMap);

}

}

} catch (TabContext.TabOverflowException feet) {}

System.out.println ("###Exception occurred in launchActivity");

toe.handleDefault ();

}

}

Need help with this code to update the user interface example

I'm triying to understand the differences between the three methods to manage UI interactions.
I'm really confused with these three terms when triying them figure out in a real case.
Basically, I know that I should use invokeLater, invokeAndWat, or getEventLock() to avoid
This exception: java.lang.illegalStateException: engine access UI without holding the lock on the event

The code below illustrates the function of the invokeAndWait method, but if I replace it with
invokeLater or getEventLock() the program will work exactly the same way.
Could you please change the code to show the differences between the three
methods of updating the user interface?

/ public final class HelloWorldMainScreen extends form {}

private LabelField labelField;
public HelloWorldMainScreen() {}
labelField = new LabelField ("Hello World");
Add (labelField);
Thread MainScreenUpdaterThread = new MainScreenUpdaterThread (this);
thread. Start();
}

{} public void appendLabelText (String text)
labelField.setText(labelField.getText()+"\n"+text);
}

}

SerializableAttribute public class MainScreenUpdaterThread extends Thread {}
HelloWorldMainScreen screen;

public MainScreenUpdaterThread (screen HelloWorldMainScreen) {}
this.mainScreen = screen;
}

public void run() {}
for (int i = 0; i)< 10;="" i++)="">
try {}
Thread.Sleep (5000);
} catch (InterruptedException ex) {};
UiApplication.getUiApplication () .invokeAndWait (new Runnable() {}
public void run() {}
mainScreen.appendLabelText ("Update");
}
});

}
}
}

These three concepts are very confusing for a lot from people so all explanatory source code
describing their functions will be highly useful for everyone, I think.

Thanks in advance!

With respect to the effect, there is no difference between methods. The difference is the way in which the result is achieved. So we can't change the code to show you the difference.

As we are unable to demonstrate the difference, you have to do with an explanation. To understand the explanation, you'll need to understand the thread of events, so if you have not already, please consider this:

http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865

If the three options are differentiated by the processing order:

(a) invokeLater executes the update on the thread of events. The transformation takes place at a later stage and the code which is in order after the invokeLater will actually run before the code within the invokeLater.

(b) invokeAndWait also manages the update on the thread of events, which means that all other events that await on the thread of events will be run before this code. But any code after the invokeAndWait will not be executed.

(c) the synchronized option, like invokeAndWait, runs the update of the UI before moving on to the following code. The difference is that the code to run on the event Thread is not executed before code in the synchronized block.

If this is meaningless, so that probably does not matter too much. in general, you should use invokeLater, except if you need to update the user interface occur in the order with your background processing. If so, use invokeAndWait. It has synced are very few occasions where you must use the block, and it should be very small updates to the user interface and you should understand the implications this could have on the wire events.

Web pages and user interface display too small in Firefox 20.0.1 (but fine in IE and Chrome) - how can I fix?

On my Dell Inspiron 7720, running Windows 8 64-bit, Chrome and IE display web pages in their correct format immediately after their installation, but Firefox 20.0.1 displays too little (and the user interface of FF is too small as well).

I went on all kinds of things, it might be and know I can install an add-on to enlarge pages at least, but I really want to get FF displaying correctly of course.

I use my native resolution 1920 x 1080 - laptop and have to display Windows set up for display at 150% - % of Windows display development does not affect display FF.

Can someone tell me please how to get FF displaying correctly (without an add-on.)

Help appreciated,
US5

Thanks for your help cor - el.

I just installed NoSquint and it works perfectly for the web; pages. Then, I found a theme with bigger icons in "complete themes" - there are a number of them.

Guess I expected to understand why only FF was smaller, (not just solve the problem) - However, the setting is very nice-thanks!

What script to create a model with a user interface panel

Hello guys,.

So I am new to scripting and javascript and I'm trying to keep it simple. I'm a VJ and want to create a script where I get a 'BPM' and a 'beat' lengh and it generate me a comp with the right length and * a layer with a marker ofr each beat.

I was able to create this script, but I try to make it look a little better with integration of the user interface for AE I wasn't able to make it work right. If anyone can help me or give me some advice. I think that I'm not good with the expression "addComp" in the buildUI function.

I copy everythin because it is long but you'll be understaind the main idea. My question is how to that the entry in my Advanced UI instead of "the guest".

Here is my first code that does the job:

Elements Var Set

var name = prompt ("membership name");

var BPM = prompt ("your BPM");

If (isNaN (BPM)) {}

Alert ("you must give the model a value");

}

Var prompt = beats ("how many times");

If (isNaN (Beats)) {}

Alert ("you must give the model a value");

}

frameRate var = prompt ("your fps");

If (isNaN (frameRate)) {}

Alert ("you must give the model a value");

}

term var = (60 / BPM * bat); Automatically generated

var beat = (60 / BPM);

Part of creation

app.project.items.addComp (name, 1920, 1080, 1, duration, frameRate); Create the model with custom Lengh

App.Project.Item (01).layers.addSolid ([0,0,0], "BG", 1920, 1080, 1, length); Create solid BG

var firstLayer = app.project.item (1) .layer (1);

firstLayer.label = 16;

App.Project.Item (01).layers.addSolid ([0,0,0], "FX", 1920, 1080, 1, length); Create sound FX

App.Project.Item (01).layers.addNull (Duration); Create the Null object

var firstLayer = app.project.item (1) .layer (1); Rename the Null object

firstLayer.enabled = false;

firstLayer.name = "Beats";

firstLayer.label = 0;

Place a marker on the 64 first beat

var myMarker = new MarkerValue("0");

firstLayer.property("Marker").setValueAtTime (beat * 0, myMarker);

Every beat on opacity-keys

myProperty = firstLayer.opacity;

myProperty.setValueAtTime (beat * 0, 0);

For reference, I'm going to place code Dan here and use line numbers, as I explained.

Fig. A

var name = prompt("Composition name");
var BPM =prompt("Your BPM");
if (isNaN(BPM)) {
    alert("You must give the comp a value");
  }

var Beats = prompt("How Many Beat");
if (isNaN(Beats)) {
    alert("You must give the comp a value");
    }

var frameRate = prompt("Your fps");
if (isNaN(frameRate)) {
    alert("You must give the comp a value");
    }

var duration = ( 60  / BPM * Beats ); //Auto Generated
var beat = (60  / BPM);
//Creation Part
var myComp = app.project.items.addComp(name, 1920, 1080, 1, duration, frameRate); // Create Comp with Custom Lengh
var firstLayer = myComp.layers.addSolid([0,0,0], "BG", 1920, 1080, 1, duration); // Create BG Solid
firstLayer.label = 16;
myComp.layers.addSolid([0,0,0], "FX", 1920, 1080, 1, duration); // Create FX Solid
firstLayer = myComp.layers.addNull(duration); // Create Null Object
firstLayer.enabled = false;
firstLayer.name = "Beats";
firstLayer.label = 0;
// Place a marker on the 64 first beat
var myMarker = new MarkerValue("0");
firstLayer.property("Marker").setValueAtTime(beat*0, myMarker);
// Key every Beat on opacity
var myProperty = firstLayer.opacity;
myProperty.setValueAtTime(beat*0, 0);

OK, so for your configuration, looks like you're striking four data sets. You have the model name (fig.) At line 1), BPM (lines 2-5 of Fig. (A), (lines 7-10 of Fig. rhythms (A) and the FPS (lines 12 to 15 of Fig. (A). then it comes to the UI, you can change what I had posted to...

res = "group{orientation:'column', alignment:['fill', 'fill'], alignChildren:['fill', 'fill'],\
  myCompName: EditText{text:'Enter comp name'},\
  myBPM: EditText{text:'Enter BPM'},\
  myBeats: EditText{text:'Enter beats'},\
  myFPS: DropDownList{properties:{items:['23.976', '24', '29.97', '30', '59.97', '60']}},\
  createComp: Button{text:'Create comp'},\
}"

This will give you all entries in four data for the user interface. It is preferable to assign each control to a new variable for use in your script.

// Control Variables
  var compName = myPanel.grp.myCompName;
  var myBPM = myPanel.grp.myBPM;
  var myBeats = myPanel.grp.myBeats;
  var fps = myPanel.grp.myFPS;
  var createComp = myPanel.grp.createComp;

Once you have these variables you can then start the default implementation as appropriate. in this case, the drop-down list should be a starting point for it's selection, so that you can say to use the first default entry as follows.

//Defaults
  fps.selection = 0;

Now, you can configure your onClick for button createComp feature. This will contain to working part of the Dan code that treats everything (lines 17-33 of Fig. (A). I've added a few lines of options above this (lines B Fig. 1-7) in the below code just to match the variable names so you wouldn't need to change the code.

Fig. B

//onClick setups
  createComp.onClick = function(){
  //Gather user entered values
  var name = compName.text;
  var BPM = Number(myBPM.text);
  var Beats = Number(myBeats.text);
  var frameRate = fps.selection.text;

  var duration = ( 60  / BPM * Beats );
  var beat = (60  / BPM);
  //Creation Part
  var myComp = app.project.items.addComp(name, 1920, 1080, 1, duration, frameRate);
  var firstLayer = myComp.layers.addSolid([0,0,0], "BG", 1920, 1080, 1, duration);
  firstLayer.label = 16;
  myComp.layers.addSolid([0,0,0], "FX", 1920, 1080, 1, duration);
  firstLayer = myComp.layers.addNull(duration);
  firstLayer.enabled = false;
  firstLayer.name = "Beats";
  firstLayer.label = 0;
  // Place a marker on the 64 first beat
  var myMarker = new MarkerValue("0");
  firstLayer.property("Marker").setValueAtTime(beat*0, myMarker);
  // Key every Beat on opacity
  var myProperty = firstLayer.opacity;
  myProperty.setValueAtTime(beat*0, 0);
  }

Then line 2 Fig. b starts the call onClick for button and assigns a function. Within the function, we run the process. Fig. B Line 4 seizes the compName edit text attribute of the text control, using the Number() function convert us this text to a number for use online B Fig. 9 and 10 and B Fig. 5 line gets the text attribute of the text control edit BPM. Goes same for line 6 of the Fig. B and the beats variable. For line B Fig. 7, a drop-down list requires calling his selection of the attribute, then it is text attribute to get the actual string. The drop was more logical for FPS due to the standard rates that exist. This list can be changed of course to your liking. Now, there is no safety net as I like to call for the modification of the text controls to make sure text is not entered when you need a number and vice versa. It would be something of can check after line 7, Fig. B before trying to run the code in process (Fig. B lines 9-25). I hope that it will be easy enough for you to understand.

If the script is as follows.

{
function myScript(thisObj) {
  function myScript_buildUI(thisObj) {
  var myPanel = (thisObj instanceof Panel) ? thisObj : new Window("palette", "My Panel Name", [0, 0, 300, 300]);

  res="group{orientation:'column', alignment:['fill', 'fill'], alignChildren:['fill', 'fill'],\
  myCompName: EditText{text:'Enter comp name'},\
  myBPM: EditText{text:'Enter BPM'},\
  myBeats: EditText{text:'Enter beats'},\
  myFPS: DropDownList{properties:{items:['23.976', '24', '29.97', '30', '59.97', '60']}},\
  createComp: Button{text:'Create comp'},\
  }"

  //Add resource string to panel
  myPanel.grp = myPanel.add(res);

  // Control Variables
  var compName = myPanel.grp.myCompName;
  var myBPM = myPanel.grp.myBPM;
  var myBeats = myPanel.grp.myBeats;
  var fps = myPanel.grp.myFPS;
  var createComp = myPanel.grp.createComp;

  //Defaults
  fps.selection = 0;

  //onClick setups
  createComp.onClick = function(){
  //Gather user entered values
  var name = compName.text;
  var BPM = Number(myBPM.text);
  var Beats = Number(myBeats.text);
  var frameRate = fps.selection.text;

  var duration = ( 60  / BPM * Beats );
  var beat = (60  / BPM);

  //Creation Part
  var myComp = app.project.items.addComp(name, 1920, 1080, 1, duration, frameRate);
  var firstLayer = myComp.layers.addSolid([0,0,0], "BG", 1920, 1080, 1, duration);
  firstLayer.label = 16;
  myComp.layers.addSolid([0,0,0], "FX", 1920, 1080, 1, duration);
  firstLayer = myComp.layers.addNull(duration);
  firstLayer.enabled = false;
  firstLayer.name = "Beats";
  firstLayer.label = 0;

  // Place a marker on the 64 first beat
  var myMarker = new MarkerValue("0");
  firstLayer.property("Marker").setValueAtTime(beat*0, myMarker);
  // Key every Beat on opacity
  var myProperty = firstLayer.opacity;
  myProperty.setValueAtTime(beat*0, 0);
  }

  //Setup panel sizing and make panel resizable
  myPanel.layout.layout(true);
  myPanel.grp.minimumSize = myPanel.grp.size;
  myPanel.layout.resize();
  myPanel.onResizing = myPanel.onResize = function () {this.layout.resize();}

  return myPanel;
  }

  var myScriptPal = myScript_buildUI(thisObj);

  if ((myScriptPal != null) && (myScriptPal instanceof Window)) {
  myScriptPal.center();
  myScriptPal.show();
  }
  }

  myScript(this);
}

Email user interface

Hello!
IM seriously thinking of using BC as my client for their e-commerce platform. They have a number of email accounts, however, and even if I want to use BC such as hosting their email, I would like to see how the email user interface and how it looks like the first. I'm looking for a demo or a video or even a screenshot for quite a while now, but I have not found. I am really convinced by the whole concept of the BC. I just want to go with the antire project.
Any help please?
GideonStark

You cannot test the messaging with a trial site service, you need to upgrade to it.

I see not any document with pictures of the webmail user interface or any video related, so I tried to create a page for you where you can view the webmail help guide that has some screenshots and images included for interface as well as all set statements.

http://unidel.BusinessCatalyst.com/webmail-Guide

If not help much so please join support chat.

Sanjit

Get the number of users of the pod of the Roster

Hello, I am trying to display the number of users online by using the pod of the list, but I can't understand how do. Does anyone have any suggestions?
Kind regards.

List Pod is just a user interface component that displays all the users. It will be

show users in the room by default, you will not have to do anything, unless

your anonymous presence is enabled.

If you want to get users and their details, you must use

userManager.userCollection which is a collection of the ArrayCollection that contains all the

users. Similarly, if you want to get only the hosts or participants only.

You should get userManager.hostCollection or

userManager.participantCollection and so on.

Hope this helps

Thank you

Hironmay Basu

downloaded v.21, but do not get new user interface

I downloaded the latest version several times. I want the new UI, but my browser will not convert to the new user interface. I don't know if there is an option somewhere is going to fix this problem, or what is happening. Any help would be appreciated.

You get the orange Firefox menu button when the menu bar is hidden.
- Firefox menu button > Options
- View > toolbars (press F10 to display the menu bar)
- Right click on empty toolbar space
See:
- https://support.Mozilla.org/KB/how-do-i-get-Firefox-button
- https://support.Mozilla.org/KB/menu+bar+is+missing

Offset of the user interface after update of El Capitan

Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

/ Library/LaunchAgents

~/Library/LibraryAgents

/ Library/LaunchDaemons

/ Library/Caches

~/Library/caches

and many other files like these.

None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

Thank you

Caulin Bloom

Please launch the Console application in one of the following ways:

☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

The title of the Console window should be all Messages. If it isn't, select

SYSTEM LOG QUERIES ▹ all Messages

in the list of logs on the left. If you don't see this list, select

List of newspapers seen ▹ display

in the menu at the top of the screen bar.

Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

Please don't dump blindly thousands of lines in the journal in this discussion.

Please do not post screenshots of log messages - text poster.

Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

Need help in providing an interface for drive HARD Toshiba MK2035GSS

Hello, is there anyone who can (and want) to help by providing an interface (e-card) or a functional HDD full, with following specifications:

Toshiba mk2035gss
hdd2a30 zw01 s c

The part number is irrelevant, because under the same code p/n, Toshiba distributes hdd different types with the same capacity.
I need to recover data from a failed hard drive, it seems that only the circuit board has been affected by an external power supply (probably) faulty suply.

As a matter of fact, the HARD drive is under warranty, but recovery of the info is (as usual) more important than losing the warranty.

I tried very hard to find a similar pattern, but it seems that this drive is a single (probably specifically made for me, to make me hate my luck :(
Even on ebay, there are 2 models that are very close, but not this one.

If you could help, please contact me by e-mail at [email protected]

Thank you very much

Costin.

I don't know what must be unique on this Toshiba HDD.
Is there a difference when compared with similar hard drives produced by different manufacturers?

Have you tried to talk with the Toshiba authorized service provider? Maybe they have a good idea of how to help.

User interface customized to run at the same time?

Hello

My question is about the user interfaces customized for performances with the parallel model. In my current project, we use the parallel model with sockets to the UI and test 4, we have flags of chain for its execution, which displays messages to the user and the other 2 which has the function of a streaming indicator that displays information throughout the test, also showing instances of time. So, in total 8 indicators that display information about the 4 independent runs alongside. Up to now, I managed to create the user interface only for the sequential mode, using 2 simple string indicators and sending messages to the TestStand to the strings through the user interface Messages. My problem is that I don't know how to implement this feature for the sockets to test more.

Attached images of the façade and the diagram of blog of the GUI as it appears now.

I am very new to TestStand (I know that for the last month), so I expect that my question and description of cases are not so clear, so please let me know if anything is badly explained.

I would be grateful for any help.

Basically, whenever you get a message from UI associated with running (e.g. UIMsg_StartExecution, UIMsg_Trace, etc.), you will need to determine what testsocket the UIMessage applies to and then update the corresponding user interface controls. A way to get the testsocket is as follows:

testsocketindex = uimsg. Thread.GetSequenceContext (0, frameId_Notused). AsPropertyObject(). GetValNumber ("RunState.TestSockets.MyIndex", 0)

In addition, once you know where to go a particular run, you can attach to the control Id of this execution (i.e. property of Execution.Id) and just look at the execution Id instead.

Hope this helps,

-Doug

[Help] Number of user interface

Similar Questions

Maybe you are looking for