Help! Only the first part of my production of exports.

Similar Questions

• My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.

  There is this bug on this problem:

  • http://Bugzilla.DownloadHelper.NET:8080 / show_bug.cgi? id = 642

  I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.

  Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).

  YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• Why my printer has suddenly started printing only the first three quarters of a page...?

  Why my printer has suddenly started printing only the first three quarters of a page...?

  Hello

  Thanks for posting the question in the Microsoft Community!

  If I understand correctly, you are facing problem with the printer of. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  We start with two questions:

  1 have had any changes made on the computer before the show?

  2. What is the brand and model of the printer?

  I suggest for the link and try to run the troubleshooter and check if it helps.

  Printer in Windows problems

  If the problem is not resolved, please provide more information to help you best.

  Thank you.

• I am trying to load a MPEG file into windows Movie Maker 2013 and load only the audio part. What can be done to fix this

  I have MPEG files that I'm editing and when I load in Movie Maker only the audio part load. During loading, I get the following message at the bottom of the screen for the audio to load but when that ends more nother is responsible and the screens indicate only the audio track.

  Hello friend. I know that windows movie maker supports wmv video well, you can convert your videos to wmv mpeg video for a trial, it should work. If you don't know how to convert a video, this video converter will help you a lot.

• When it start printing; It intercepts the first part of the paper then stop

  Hello
  I have HP LaserJet 1100
  When it start printing; It intercepts the first part of the paper then stop; so it does not print and the part of the document come in but not out
  So what is the name of the part should be replaced?
  Let me know soon
  Concerning

  Hello

  Thanks for the post.  With it, we can have several questions the cause.  Type/paper weight, not enough paper in the tray, rollers which don't sting power or the remains of a previous paper jam.  I've included a pasted below document that can help with this and help refine the root cause.  Good luck!

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=25470&prodTypeId=18972&prodSeriesId=25470&ObjectID=bpl05811

• Windows displays only the first page of a multipage document - solutions?

  I recently installed an HP printer on my laptop with the help of a support HP online technician, but only the first page printed - the other eight were empty.

  Also, one-third of the right side of the document (electronic mail) was chopped up, while the leftmost column prints (Windows Live/Hotmail/Hotmail address) in the full preview and printing is not available since I upgraded to IE8 on my laptop HP under Vista Home Premium.

  How do I Center this document so that it will print correctly, and can I add the "Print preview" option in my Google toolbar, or install an another toolbar that includes?

  Thank you!

  http://welcome.HP.com/country/us/en/support_task.html

  Go to the above link > 'See support and troubleshooting information' > key in your number of printer > there is the use of manuals there.

  For more information, contact HP:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• Newb question - displays only the first of several fields

  As a first application of Bb, I write a stopwatch and I want the larger time scale and the small milliseconds. As part of what I am trying to display several bitmap or label side-by-side fields, but when I run it using the Simulator, only the first is displayed.

  So, for example, what I want is:

  1-2: 3 4:5:6 7 8 9

  with each number in own field but what I mean is just

  1

  that is the first field. If I then use buttons they all appear in the verticalFieldManager by default in horizontalField Manager but if I use labels or bitmaps, then all I get is the first field, even if I remove the horizontalFieldManager and just use the default verticalFieldManager. I googled the question, this forum and spent several hours reading the code examples and documentation, but I have yet to understand why I can't put several fields of these types of side-by-side. I have to have something between them as separators or empty fields?

  The code that I've got so far is the following...

   public TimerView()    {     super();      HorizontalFieldManager timerField = new HorizontalFieldManager();
  
        Bitmap hour10 = Bitmap.getBitmapResource("num_1.png");        Bitmap hour01 = Bitmap.getBitmapResource("num_2.png");        Bitmap minute10 = Bitmap.getBitmapResource("num_3.png");      Bitmap minute01 = Bitmap.getBitmapResource("num_4.png");      Bitmap second10 = Bitmap.getBitmapResource("num_5.png");      Bitmap second01 = Bitmap.getBitmapResource("num_6.png");      Bitmap ms100 = Bitmap.getBitmapResource("num_7.png");     Bitmap ms010 = Bitmap.getBitmapResource("num_8.png");     Bitmap ms001 = Bitmap.getBitmapResource("num_9.png");     Bitmap colon = Bitmap.getBitmapResource("Colon.png");
  
        BitmapField bfHour10 = new BitmapField(hour10);       BitmapField bfHour01 = new BitmapField(hour01);       BitmapField bfHourColon = new BitmapField(colon);     BitmapField bfMinute10 = new BitmapField(minute10);       BitmapField bfMinute01 = new BitmapField(minute01);       BitmapField bfMinuteColon = new BitmapField(colon);       BitmapField bfSecond10 = new BitmapField(second10);       BitmapField bfSecond01 = new BitmapField(second01);       BitmapField bfSecondColon = new BitmapField(colon);       BitmapField bfMs100 = new BitmapField(ms100);     BitmapField bfMs010 = new BitmapField(ms010);     BitmapField bfMs001 = new BitmapField(ms001);
  
        timerField.add(bfHour10);     timerField.add(bfHour01);     timerField.add(bfHourColon);      timerField.add(bfMinute10);       timerField.add(bfMinute01);       timerField.add(bfMinuteColon);        timerField.add(bfSecond10);       timerField.add(bfSecond01);       timerField.add(bfSecondColon);        timerField.add(bfMs100);      timerField.add(bfMs010);      timerField.add(bfMs001);
  
          add(timerField);  }
  

  I know that this code violates probably some best practices or standards, but I intend to clean later.

  -edited for spelling

  Give it a go with images of the numbers.  You have it easy with BitmapFields, because you know how much space they need with

  getPreferredHeight() and getBitmapWidth().  Then you should be able to stick them next to each other.

  If I was doing this and who are looking for a special look at the clock, which seems to be what you are doing, I would like to have the digital icons as you do, and then set an image large enough to hold the value of the clock and in my routine of painting, select draw digital icon proper, in the right place.  As long as you load the bitmaps only once, I think it's the most effective way to do it.

  Of course, a much simpler way would be to have just a RichTextField formatted as you suggest - RichTextField because you can have two different fonts in a single field.

• Using ListView with ArrayDataModel displays only the first element in each QVariantMap within the matrix

  I have this QML who have a ListView with datasource to a full ArrayDataModel from the CPP file for creationcompleted, I loop in the table to add the hour together to appear as a label on the page, what works. However, when I want to view these items in the list, it will display only the first element of the QVariantMap within the table, no error on the log of the device. Also, triggered more does not work, but when I click it, it will have a blue border surrounding it, but the onTriggered does not fire.

  Here is an excerpt of the CPP on the table fill

  This-> eventsModel = new ArrayDataModel();

  QVariantMap event;

  event ['EventName'] = "Event1";

  event ["EventHour"] = "00";

  event ["EventMinute"] = "01";

  event ["EventSecond"] = '02 ";

  QML-> setContextProperty ("eventsModel", it-> eventsModel);

  Here's the QML

  {Of container

  ID: eventListContainer

  {To ListView

  ID: eventList

  dataModel: eventsModel

  Use a ListItemComponent to customize the appearance of the list view

  listItemComponents:]

  {ListItemComponent}

  type: 'point '.

  {StandardListItem}

  Title: 'Event' + ListItemData.EventName;

  Description: "time:" + ListItemData.EventHour + ":" + ListItemData.EventMinute + ":" + ListItemData.EventSecond; "»

  }

  }

  ]

  onTriggered: {}

  var selectedEvent = dataModel.data (row);

  var eventDetailPage = eventDetailDefinition.createObject ();

  eventDetailPage.txtEventName.text = selectedEvent ['EventName'];

  eventDetailPage.pickEventTime.value = picker.dateFromTime(selectedEvent["EventHour"]+":"+selectedEvent["EventMinute"]+":"+selectedEvent["EventSecond"]);

  eventDetailPage.open ();

  }

  }

  Any help would be appreciated.

  Thank you.

  ListView determines ItemType of the element by calling the function itemType of the dataModel. By default, an ArrayDataModel returns an empty string for this call (see https://developer.blackberry.com/cascades/reference/bb__cascades__arraydatamodel.html).

  This leaves you with a few options:

  (1) If you have no header and all the elements are the same, you can make

  ListItemComponent {
       type: ""
       ...
  

  (2) If you have headers or different elements, you can extend ArrayDataModel and implement your own function of itemType

  (3) you can define a function of ItemType on your ListView in QML. Documentation:

  ListView called DataModel::itemType() for each item in order to know the type. QML, this can be overridden by declaring the itemType function (data, row) on the ListView element. ListView then call this function instead of the function DataModel.

  Here's how to create a list in QML which creates a header for all items on the high level and aStandardListItem for each item below the top level:

• How can I burn only the first 2 hours of a 4 hour program in Windows Media Center?

  The Today show is listed as 4 hours in the Guide.  I want to only record from 07:00 to 09:00 and not paws full of 07:00 to 11:00.  Is there a way to save only the first 2 hours?

  see if
  http://www.digitalgeekery.com/175/how-to-create-a-manual-recording-in-Windows-Media-Center-for-Windows-7/
  helps you.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• When I click on play now only the first track plays

  I downloaded a few albums but when I click on play now only the first track is playing. Why is this? play the entire album?

  OP - music play all

  Hello Terence,

  Thanks for posting your query on the Microsoft Community.

  We understand the inconvenience caused and we will try our best to solve the problem.

  To help you better, I would like to know; are you clicking on play now on the individual song or the whole album?

  As a first step, I suggest you try to play the entire album and check if it helps.

  If the problem persists, perform audit and resolution of the problems of the app if it helps.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  For more information on the application of music, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-8/music

  It can be useful, we meet with the status of your question. We will be happy to help you.

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• v$ fixed_view_definition where and ' GV$ SESSION "= only the first 4000 characters

  Hi all

  I need to get the defeintion of the opinion GV$ SESSION.

  I get only the first 4000 characters.

  Select * from v$ fixed_view_definition where view_name = "GV$ SESSION;

  Could you please help me?

  Thank you

  Cherif.

  Cherif bh wrote:

  Hi Martin,

  Thanks for your help. I use 11.2.0.3 and is EXPAND_SQL_TEXT added 12 c.

  I try to get the definition of a problem of performance on gv$ session; I need a list of the tables and columns and add the best predicates and access them using indices

  You should be able to get the same thing on 11.2.0.3 too:

  https://jonathanlewis.WordPress.com/2012/07/10/expanding-SQL/

  The package is called DBMS_SQL2 it.

  Randolf

• Calculation for cutting the first part of the string in the Manager list item values

  Hello

  Please help me with a calculation after submit pl/sql function process for cutting the first part of the string (CQ.) within the values of list manager. For example the list manager support contains values such as

  CQ... SAMPLE1... TEST1

  CQ... SAMPLE2... TEST2

  CQ... SAMPLE1... TEST2

  The calculation process should cut the first part(CQ..) and must return to the list of values of Manager as

  SAMPLE1... TEST1

  SAMPLE2... TEST2

  SAMPLE1... TEST2

  Oracle APEX 4.0.2 is the version and Oracle 10 g r2 is the database.

  Please help me with possible approaches in the development of the service. Thanks in advance.

  Thank you

  Orton

  orton607 wrote:

  But when I insert/update Manager list item values I don't want the first part of the string in the database.

  I still don't understand why you can't change the LOV or create a new...

  The LOV should be:

  SELECT original_value  AS HUMAN_SEES_THIS_VALUE
      ,LTRIM (SUBSTR ( original_value, INSTR (original_value, '..') + 2))
        AS DATABASE_GETS_THIS_VALUE
  FROM (
    -- place original SQL for LOV here
  )
  

• replace only the first and the second comma by TAB in the apex using using jquery

  All,
  
  I'm generating models of string in the text box in my apex as page == > 23232,445454, «454545,7878,988978, 3r3e»
  and I want to replace only the first and the second comma with TABS so I get like == > 23232 445454 «454545,7878,988978, 3r3e»
  
  It should run with the jquery code when I click my button?
  
  any help on this please?
  
  Thank you.

  How does this update function:

  function replaceUpToN(original, search, replaceWith, maxOccurence){
  
      var NEW_LINE = '\n';
  
      var lines = original.split(NEW_LINE);
  
      $.each(lines, function(index, value){
          var idx = 0;
          lines[index] = value.replace(search, function(match, pos, original){
              idx++;
              return idx <= maxOccurence ? replaceWith : match;
          });
  
      });
  
      return lines.join(NEW_LINE);
  
  }