Help, please! Play the series of clips as slide show

Hello

I'm fighting with AS3, trying to play a series of clips, one after the other, like a slide show. There is no control button, just several layers, each with a clip of the first image. I want to go to the bottom of the list and play one after the other, and then eventually end up on the last clip without looping to the first.


Can someone help me with the code?


Hugs!

Julia

I have usually only download and fix the files unless I'm hired.

Addendum: Thanks for the offer to pay me.  Download and correct the source of someone files can involve a lot of time.  but sometimes there are just simply not enough force necessary for me to load.  It's one of those moments.

Change the code as follows, and your file should work as expected.  There is no charge.

var mcA:Array = [Scene1_mc, Scene2_mc, Scene3_mc];

var: index: uint = 0;

mcA [index] .nextFrame ();

this.addEventListener (Event.ENTER_FRAME, f);

function f(e:Event):void {}
mcA [index] .nextFrame)
If (.currentFrame mcA [index] is {mcA [index] .totalFrames})

mcA [index] .gotoAndStop (1);

index = (index + 1) %mcA.length;

mcA [index] .nextFrame ();

}

}

Tags: Adobe Animate

Similar Questions

  • When I was playing the game and my 3D PC show the black screen and the sound of noise.

    Hi Admin,
    When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
    My PC specs are as follows

    Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

    phoechan,
    More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Is it possible in Windows Live Mail to change the settings for the images remain in the body of the email, not in a slide show?

    change how I get pictures on incoming emails

    Most, but not all emails that I receive that contains images come as 'slide show', and where the image should be, there is a blank box with a red x.  Is it possible in Windows Live Mail to change the settings for the images remain in the body of the email, not in a slide show?

    I know that they are sent correctly, because I send on my iPod and the photos are where they should be.

    I have Windows 7 and I hope you can help me.

    Thank you

    Hello

    ·         What browser do you use?

    ·         What happens when you click on the slideshow of the photo? The photos are displayed when you click the slide show?

    If you use Internet Explorer, then I would suggest that you follow the instructions in the link and check if this can help:

    http://support.Microsoft.com/kb/283807

    If operations since the link above does not help then I suggest that you post your query on the Windows Live forum for assistance:

    http://windowslivehelp.com/product.aspx?ProductID=15

  • How can I change the symbols of meter for slide show templates in Muse?

    How can I change the symbols of meter for slide show templates in Muse? Currently, they are obviously normal text characters. So, how can I change the filled circles, for example?

    Hello

    If I not mistaken, you want to change the style, ect of the navigation in a slide show arrows. To do this, double-click the arrow. The container of the arrow is highlighted. You can then use the fill option and use the rounded corners option. You can use all the picture with her fill option.

    Please let me know if I'm missing something.

    Kind regards

    Aish

  • Is it possible to adjust the transparency of a caption slide show of Muse area, while maintaining the text inside to 100%?

    Is it possible to adjust the transparency of a caption slide show of Muse area, while maintaining the text inside to 100%?

    Thank you!

    In fact, I was wrong. Cramp brain today. It can be adjusted individually by using the link to the fill tool

  • Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

    Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

    You can apply the opacity to images or defining a key position for slide show as well as with the page highlight opacity changes and will bring similar effect.

    Thank you

    Sanjit

  • 0x945002D, I get this error code when I try to record a movie, help please. The error occurs when it gets to a certain part of the video

    I have a section of the video and when the recording function gets to it, he stops and says I have to remove it, it is saved as .wmv. I try to record on DVD and/or video high definition, but always stop at this one video clip. Help please.

    Just a thought...

    The. Clip WMV in question may be corrupted in some
    as well as Windows Live Movie Maker problems
    This encoding.

    Sometimes import a. Clip WMV in a conversion
    program and convert it to WMV will clear up the question.

    I know it may sound redundant but the conversion process
    creates a new version of the. WMV file that would work
    best in Movie Maker.

    If the. WMV file has previously been converted to another
    format... it may be best to start with the original for file
    This conversion. WMV.

    There are many converters available on the net... some
    free... some detail.

    The following freeware converter is just one example:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Format Factory (freeware)
    http://www.videohelp.com/tools/Format_Factory
    (the 'direct link' is faster download)
    (the file you want to download is: > FFSetup290.zip<>
    (FWIW... installation..., you can uncheck
    ('all' boxes on the final screens)
    (Windows XP / Vista / 7)

    First, you will need to decompress the file or just open the
    Drag > FFSetup290.exe< out="" of="" the="">
    and drop it on your desktop. To install left click.

    Next, after the download and installation of Format
    Factory... you can open the program and
    left click on the toolbar, the "Option" button and
    "Select an output folder to" / apply / OK.
    (this is where you find your files after they)
    are converted)

    Drag and drop your video clips on the main screen...

    Select "all to WMV" / OK...

    Click on... Beginning... in the toolbar...

    That should do it...

    Good luck...

  • Help please with the addition of a Section of the video

    I created a video for a school organization. Have completed a section or scene, I would like to add more scenes before this scene. I know how to add things, but I don't want to start adding videos and pictures and then my audio may not be in the same place. Is it possible to add without the pictures and audio are out of sync? Can I connect the audio to the video? Help, please. Thank you!

    I guess that you do not want audio move with the clip with the fact that it is already synchronized. In this case select the video and the audio clip, right click and select "link Audio and video.

    See you soon,.

    --

    Neale

    Insanity is hereditary, get you your children

  • HELP PLEASE! The computer was restarted after a bugcheck.

    I was hoping that someone could help me understand what is the cause. This has happened for the past 2 days on one of our servers. The server is a Windows Server 2008 R2 computer.

    That's the message in the event viewer:

    The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000050 (0 x 0000000000000001, 0xfffff800016d40cc, 0xffffffffffffffd0, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 030313-9156-01.

    This is the message that is displayed on windows re-opening after the accident:

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.272.7
    Locale ID: 1033

    More information about the problem:
    BCCode: 50
    BCP1: FFFFFFFFFFFFFFD0
    BCP2: 0000000000000001
    BCP3: FFFFF800016DE0CC
    BCP4: 0000000000000000
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 272_3

    Files helping to describe the problem:
    C:\Windows\Minidump\030413-8765-01.dmp
    C:\Temp\WER-83783546-0.SysData.XML

    Hello

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    For BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer see my
    answers if this thread - top 3 RESPONSES (+ 1 other).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    --------------------------------------------------------------------------------------------------

    BCCode: 50 0 x 00000050

    References to Vista also apply to Windows 7.

    Have you recently added any hardware? Have you updated a driver just before
    These began? (Check control panel - updates of Windows to see if all drivers
    have been updated it there all the time, it started) main likely culprits are video
    pilot, other great drivers, memory and antivirus/antispyware/security products
    could be faulty as well as reader questions.

    Use the troubleshooter below and refer to the following message for pilots and
    memory when you get these sections and then return of the disease.
    game needed.

    BCCode: 50 0 x 00000050

    Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

    PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

    Important info if you received a STOP Code

    If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you have purchased
    Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

    If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

    These actions could prevent a mistake like this does not happen:

    1. Download and install updates for your computer from Windows Update device drivers.
    2. Scan your computer for computer viruses.
    3. Check your hard drive for errors.

    PAGE_FAULT_IN_NONPAGED_AREA parameters

    The following settings are displayed on the blue screen.

    Parameter Description

    1

    The referenced memory address

    2

    0: Read operation

    1: Write operation

    3

    Address that referenced memory (if known)

    4

    Reserved

    If the driver responsible for the error can be identified, its name is printed on the blue screen and stored in memory location (PUNICODE_STRING) KiBugCheckDriver.

    Cause

    Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

    Another common cause is a defective system service installation.

    Antivirus software can also trigger this error, as can a corrupted NTFS volume.

    Resolution


    Fix a defective hardware problem:     if the material has been added to the system recently, remove it to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.


    Fix a defective system service:     disable the service and confirm that this resolves the error. If so, contact the manufacturer of the system service on a possible update. If the error occurs during the system startup, restart your computer, and then press F8 to menu mode characters that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time.


    A problem of antivirus software:     disable the program and confirm that this resolves the error. If this is the case, contact the manufacturer of the program about a possible update.


    Fix a corrupted NTFS volume:     run Chkdsk /f /r to detect and repair disk errors. You must reboot the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check the problems between the SCSI controller and the drive.

    Finally, check the system log in Event Viewer for additional error messages that might help determine the device or driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.

    Remarks

    In general, this address is in the released memory or simply not valid.

    This cannot be protected by a try - except Manager - it can only be protected by a probe.

    BCCode: 50 0 x 00000050<-- read="" this="">
    * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
    It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • change photo play in the music now kind of slide show

    is it possible to change the "play photo" slide show you select in the music screen is to not be the wall of photos one on-air. " I much prefer the old pan and zoom you get on the slideshow when you go to the photo section. He used to have it in vista media center like pictures of playing music, but it has been changed with no obvious option to select one.

    Hello

    I would suggest trying the following steps and check if it helps.

    Start the music, click the open the pictures library in media center.

    Start the slideshow here.

    Also, I suggest you leave a feedback here:

    http://support.Microsoft.com/common/survey.aspx?scid=sw;en-us;2310&altStyle=MFE&renderOption=OverrideDefault&showPage=1&FR=1&nofrbrand=1

    I hope that helps!

  • Hard to put the audio files in a slide show help!

    I can only put a single audio file when creating a slide show but trying to put another file I get the error message "the selected file cannot be read because your system does not have the necessary compress/decompression (codec) installed. Why keep this product? All I'm doing is to multiple audio files in a slideshow. Thank you.

    In addition, I use Windows 7.

    Some will work and some won't. Look into Audacity, linked above. Always convert MP3, WAV/PCM, in record in Audacity, and the problem will disappear.

    Good luck

    Hunt

  • The Windows 7 desktop background slide show can display the file names?

    Similarly, how my pictures slideshow screensaver could in Windows XP?

    Hello Steph and Aquadoc,

    Thank you very much for your answers.

    Please refer to the suggestions of Ramesh Srinivasan replied on February 4, 2010 and check the issue.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/show-pictures-filename-in-background-slide-show/a9d5ad35-EFFC-46F9-A551-fb98b3deb21a

    Important notes:
    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://Windows.Microsoft.com/en-us/Windows/back-up-registry

    I hope this information helps.

    Thank you

  • I can't find the option "view as a Slide Show" in "My pictures" in Windows XP

    In accordance with the instructions given to the center support and assistance, to see a slide show, I must go to start, my pictures, and then click view as a slide show. I can't find this option. I am running Windows XP Professional Version 2002 Service Pack 3. Please tell me how to solve this problem. Thank you, Bill

    Because your screen look nothing like that of the following screenshot:

    http://www.correctmyphotos.com/wp-content/uploads/2009/06/XP-picture-Actions550.jpg

    If not... try to open the folder my pictures and go to...
    Tools / Folder Options / General tab...
    Tick... Show common tasks in folders / apply / OK...

    Now, try again the files button in the toolbar.

    As for making your Windows Photo And Fax Viewer default viewer...
    Right-click on a photo and choose the menu... Properties / change button...
    Select (highlight) Windows Picture And Fax Viewer / OK / apply / OK...

    I suggest that you download your screenshot on a photo sharing site
    and post the link in your message. I downloaded the following example
    screenshot of a site called: depreciated.

    Task pane image
    http://Media10.DropShots.com/photos/861912/20110520/135952.jpg

  • The display of captions in slide show WPG

    After you use Windows Photo Gallery to add captions to the pictures 354, I find now that the legends do not show anywhere when you view photos in a slide show in Windows Photo Gallery. Is there a way to make the legends show that image?

    Hi HaroldBurrows,

    Unfortunately, you cannot add caption in slideshow with Windows Photo Gallery. However, you can use Windows Media Center to the addition of caption in slideshow.

    You can check the link for more information on the issue.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-Media-Center-slide-show-function/f0953b2b-D250-E011-8dfc-68b599b31bf5?msgId=d3793d1e-D450-E011-8dfc-68b599b31bf5

    I hope this helps.

  • I have the music in a photo slide show for creation of windows live movie, but I want some slides with no music... How can I do this?

    I'm doing a photo slideshow in Windows Live Movie maker, using differenct songs throughout the show.  I want to add to the slide title between certain sections, but I don't want any music for this particular slide.  How can I do this?

    Scratdude

    Hello thanks for posting your problem in the microsoft community
    • try to cut the song using strawberries the song and the tights before and after slide
    Thank you
    Nice day

Maybe you are looking for