Help setting up security WRT160N

Similar Questions

• I have a new backup disk (a disk of 5 TB of Seagate) and need help setting up with CCC!

  Hello world

  I have a new backup disk (a disk of 5 TB of Seagate) and could use help setting up with CCC.

  I did in the past without problem, but I want to assure you of a few things:

  1. This particular drive has software available in a folder on the disk backup (w / the PC and Mac versions). But... I intend to use this disk as an exact copy of my iMac HD; It must also be bootable.
  2. Should I format the drive with disk utility? Or load the software to the CCC on the disk and just leave their only backup software?
  3. One last question: I also have a MacBook Air, an iPad and an iPhone. I want to save them as well. Should I put them on separate partitions, I created? Or can we just one big happy family? The last is best.

  One last piece of information: two computers, etc, were all backed up via Time Machine. My data the most important, photos, etc., are also saved on deposit box and/or iCloud on a regular basis.

  Thanks for any suggestions or comments!

  Sally D.

  Delete and partition the drive by making a separate partition for each computer. The iPad and the iPhone is useless their own partition because they back up using iTunes and would appear in the clone of the computer that you use for each save. Each partition must be the size of the current cloned drive that can leave you with additional partitions for other stuff. Then format the drive Mac OS Extended journaled. Do not install any software that came with the drive, none of this is necessary.

  I use a very similar setup with a 3 TB drive. I clone my boot SSD in a single partition, my drive internal 1 Tb in a second, my Macbook to a third party, and I have a fourth partition which is currently empty, because I haven't decided what to do with it yet. I also have a 3 to Apple Time Capsule.

• can someone change my WZC and the setting of security through the internet?

  can someone change my WZC and the setting of security through the internet? I was watching a video on youtube when my stop comp. and restarted on its own. start and my security program was not able to start, had to uninstall and reinstall to turn back. He told me has encountered a problem and that you must close the program and the program would not close. It comes in a loop. Security found nothing. WZC to capture multiple signals, but now I can't pick up a. right extremist to the modem.

  It seems that if you picked up some malware.  What is the full error message on "antimalware executable?

  I would like to cancel the restoration ago 2 months... it's really too long to rely on system restore.  Too many things have been added in the meantime who is affected negatively by the restoration.

  It is very difficult to say anything from the limited information you provided, but I suggest starting by download, install, update and run a full scan with MalwareBytes Anti-Malware.

  In your answer, in addition to providing the full text of the error messages, provide all of the following:

  What version of Windows, including service pack, do you have?
  What antivirus application do you use?  Is up to date? Have you ever let her subscription lapse?
  What other antimalware applications do you have?
  What is the brand and model of your computer?
  What is the brand and model of your wireless router?

• Subject ' test 2', account: ' express.cites.uiuc.edu (1) ', server: ' express - smtp.cites.uiuc.edu', Protocol: SMTP, server response: ' 250 HELP ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  Error message in Windows Mail and Vista Premium where can receive the mail, but cannot send:
  Error message:
  Subject ' test 2', account: ' express.cites.uiuc.edu (1) ', server: ' express - smtp.cites.uiuc.edu', Protocol: SMTP, server response: ' 250 HELP ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  Please repost your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where the people who specialize in complementary programs such as Windows Mail will be more than happy to help you with your problem.  This looks like a server or configuration problem but these people are the experts and you should consult them.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• How communicate you with a real person who can help set up my Photoshop CS6 license from a computer Windows to a new Mac?

  How communicate you with a real person who can help set up my Photoshop CS6 license from a computer Windows to a new Mac?

  Hello

  My son has Adobe Photoshop CS6 when he attended a school for dyslexia and disorders on the autism spectrum with software for students in the United Kingdom.

  He has used with success of this edition.

  I have the codes on the box but didn't post here not sure of what?

  He moved to one-sixth of the Collyers in Horsham college and had to buy a new laptop. The College being all Apple we brought a pro IMac.

  He studied art, graphics and media education.

  It is a challenge for a person with an age of 7 years in reading! Spell checking in the Photoshop really helped his presentation work. The IMac has the recognition voice very good text.

  It will be if everything's going to be all right on to art College to study graphics.

  The problem is that he must now get his Photoshop on his new laptop computer and the version that he only works on Windows.

  It is possible to send a new code for the CS6 works on his laptop?

  In the future it will need to Photoshop and Illustrator professionally, but at this level, we cannot justify paying a monthly fee for the latest version.

  Hope you can help.

  Regarding the contact with a real person who can help, which will be necessary for you to follow through with what you want so be prepared to have your exercised patience and hope that it is not.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)
  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• SecurityException: JVM Shared, is not allowed to set the Security Manager

  When run another Applet Java and discoverer of opening I get the following error

  oracle.disco.DiscoApplet

  SecurityException: JVM Shared, is not allowed to set the Security Manager

  java.lang.SecurityException: JVM Shared, is not allowed to set the Security Manager

  at sun.plugin2.applet.SecurityManagerHelper.checkPermissionHelper (unknown Source)

  at sun.plugin2.applet.AWTAppletSecurityManager.checkPermission (unknown Source)

  at java.lang.System.setSecurityManager0 (unknown Source)

  to java.lang.System.setSecurityManager (unknown Source)

  at oracle.disco.DiscoSecurityManager.init (unknown Source)

  at oracle.disco.DiscoApplet.init (unknown Source)

  at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.init (unknown Source)

  to sun.plugin2.applet.Plugin2Manager$ AppletExecutionRunnable.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  After clicking 'OK', the following red text shows in the window of discoverer with a small error icon

  "Error.  Click for more details"

  When I click it evokes the java console to show the above

  I use Windows 7 64-bit Java1.7_25

  I also have users who are experencing the same thing.

  Addition of

  our page basejpi.htm which is used to launch our applet forms seems to have solved this error for us.

• Need help setting up related content in HCM 9.1 PeopleTools 8.51

  I need help setting up related content in HCM 9.1 PeopleTools 8.51.
  I created a new service id in 'Set Related Content Service'. Its simple, it basically goes to google.com.
  Then I assigned Related Content for the Application Pages on the page «Manage the Configuration content to related» I'm my scenario, I've added it to the careers under the main menu.
  Then I went to the careers page, but the 'related information' link does not appear. How can I get this link to related information to appear at the top of the page/component?
  
  Thank you
  -Cory

  In order to get it work, there are a few basic server configuration requirements that you need in order to make it work.

  (1) define the field of authentication on the Web server
  (2) set the authentication of domain on the web profile
  (3) enable Single Sign-On

  The next in "My Oracle Support" document provides details on configuring content services.

  E-PORTAL: how to set up content related services. [984855.1 ID]

  In addition, here is a link to the PeopleBooks online that deals with the configuration of related content services.

  http://download.Oracle.com/docs/CD/E18083_01/pt851pbr0/Eng/psbooks/tprt/book.htm?file=tprt/htm/tprt20.htm#H3002

  In addition, there are also some know the limitations to the use of related content are different depending on the version of the tools you use.

  I hope this helps.

• the user's selection by setting the security filter in the ASO to unsort database

  We found a very annoying feature of Essbase: when we make the security filter setting in the ASO database through the console of Regional service, we found that the selection of the user list is not sorted. It is very very difficult to identify the appropriate user name to set the security filter.
  
  All the tips and tricks can improve the process?

  I don't think that this problem is related to ASO - filters are filters.

  All you need to do to sort the column filters is to change the filters, then click on the column heading "name of the filter. It sorts fine in the EE 9.3.1.

  Kind regards

  Cameron Lackpour

• What is the setting of secure communication in personal cloud of Iomega EZ Media & Backup settings?

  In the settings of individual cloud, there is a setting "Secure Communication". You can choose High, Medium, or None. What is the result of each of these options? There is nothing in the manual or online help on this setting.

  The top is 128-bit and I think the middle is 64-bit.

• Need help setting bios to boot from the cd. I did already but the laptop does not start again for cd player.

  Hello

  I forgot that my administration windows log password after the holidays.  I have loaded down a free program called Ophcrack and had set my laptop to boot from cd 1 but I just cannot get the laptop to boot from a cd.  He just continued boot from the internal hard disk.

  The cd is an image and it is bootable on my desk.

  The model of laptop: laptop HP ENVY m6

  Product number: C2N77UA #ABL

  BIOS version: F.25

  Processor type: Intel Core i7-3632QM CPU @ 2.20 GHz

  OS: Windows 8.1

  I only did a password reset disk (I'm learning the hard way now!).

  I don't want to do a "System Recovery" because I have some data on it.

  I realize there are paid there password recovery tools windows, but I would like to use this 'free' program to try to break 1.

  I just need help / instructions to set the bios for laptop can be started from a cd.  I also tried to boot from a key USB but the laptop kept begin its internal drive.

  Help, please.  Thanks a ton!

  Ted

  Hi Ted,

  You are welcome

  Boot into the bios menu and go to the very section where you have disabled the Secure Boot.

  Find an entry called materials and this value to Activate.

  Save the changes and exit the bios.

  Follow the previous procedure below:

  Insert the bootable disc of Ophcrack and laptop stop.

  Tap away at the esc you key start Notepad to open the Start Menu.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Kind regards

  DP - K

• I need help for configuring security for my wireless again.

  Need a help for my Wi - Fi Protected Access set up again... somehow I deleted it while trying to access the networks wireless outside my house.

  original title: Wi - Fi Protected Access

  Hi dmcangus,

  See the Microsoft articles below for more information on WPA wireless security.

  Configure Security Wireless WPA for home networks

  http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/configure-WPA-wireless-security

  Overview of upgrading security Wi - Fi Protected Access (WPA) in Windows XP

  http://support.Microsoft.com/kb/815485

• Help setting Nat MW2

  I am completely new to wireless internet, but in any case, my problem is I do not know how to configure my router to open the Nat, I don't know what it is.  The problem is with modern warefare 2 and it is 'strict' nat setting.  I don't know what to do to open nat for I can put more server.  It may have been answered before but I need help.

  My router is.  WRT160N

  Thanks Wizard which worked very well.

• BlackBerry App cannot set the security settings to install apps from Amazon

  I have a Blackberry Z10 with the OS 10.2.1. I'm trying to install an app on the app store from Amazon and it gives me this message.

  

  I say keep and it takes me to the screen:

  

  I think that this screen may be assuming that I use an Android phone because there is no 'unknown sources' box in the screen security settings need me to the next.

  

  But I can go in the app Manager and there is a comparable setting for my Blackberry.

  

  However, I already changed this setting to allow applications from other sources.

  

  So what can I do to solve this problem? How can I get the Amazon app store to work on my Blackberry Z10? I bought the phone because I was promised Amazon apps would work. Please help me.

  I fixed this problem myself. I had to track down the origin Amazon appstore app, which has been difficult because Amazon has updated the link so that people are redirected to download Underground when they think they're getting the Appstore. I have nothing against Amazon Underground, but apparently it works well with BB10.

• Need help setting up VPN

  I'm tring to define you Site IPSEC to a VPN of Site connection a md seem to run into problems. Can someone look over my setup and lead me in the right direction:

  

  #sh ROUTER1 card crypto
  'TOWIFE' 1-isakmp ipsec crypto map
  Peer = 10.2.2.1
  Expand the access list IP HusbandToWife
  HusbandToWife 192.168.1.0 ip access list allow 0.0.0.255 192.168.3.0 0.0.0.255
  Current counterpart: 10.2.2.1
  Life safety association: 4608000 Kbytes / 3600 seconds
  PFS (Y/N): N
  Transform sets = {}
  3DESHMAC,
  }
  Interfaces using crypto card TOWIFE:
  FastEthernet0/0

  ROUTER1 #sh running-config
  Building configuration...

  Current configuration: 1027 bytes
  !
  version 12.4
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  ROUTER1 hostname
  !
  boot-start-marker
  boot-end-marker
  !
  !
  No aaa new-model
  memory iomem size 5
  IP cef
  !
  !
  !
  !
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  Archives
  The config log
  hidekeys
  !
  !
  crypto ISAKMP policy 1
  preshared authentication
  address of spike key crypto isakmp 10.2.2.1
  !
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac 3DESHMAC
  !
  TOWIFE 1 ipsec-isakmp crypto map
  defined peer 10.2.2.1
  Set transform-set 3DESHMAC
  match address HusbandToWife
  !
  !
  !
  !
  !
  !
  interface FastEthernet0/0
  10.1.1.1 IP address 255.255.255.0
  automatic duplex
  automatic speed
  card crypto TOWIFE
  !
  interface FastEthernet0/1
  IP 192.168.1.1 255.255.255.0
  automatic duplex
  automatic speed
  !
  IP forward-Protocol ND
  !
  !
  IP http server
  no ip http secure server
  !
  HusbandToWife extended IP access list
  ip permit 192.168.1.0 0.0.0.255 192.168.3.0 0.0.0.255
  !
  !
  !
  !
  !
  control plan
  !
  !
  Line con 0
  line to 0
  line vty 0 4
  !
  !
  end

  Router3 #sh card crypto
  'TOHUSBAND' 1-isakmp ipsec crypto map
  Peer = 10.1.1.1
  Expand the access list IP WifeToHusband
  WifeToHusband 192.168.3.0 ip access list allow 0.0.0.255 192.168.1.0 0.0.0.255
  Current counterpart: 10.1.1.1
  Life safety association: 4608000 Kbytes / 3600 seconds
  PFS (Y/N): N
  Transform sets = {}
  3DESHMAC,
  }
  Interfaces using crypto card TOHUSBAND:
  FastEthernet0/0

  Router3 #sh running-config
  Building configuration...

  Current configuration: 1033 bytes
  !
  version 12.4
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  name of host Router3
  !
  boot-start-marker
  boot-end-marker
  !
  !
  No aaa new-model
  memory iomem size 5
  IP cef
  !
  !
  !
  !
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  Archives
  The config log
  hidekeys
  !
  !
  crypto ISAKMP policy 1
  preshared authentication
  spike key crypto isakmp 10.1.1.1 address
  !
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac 3DESHMAC
  !
  TOHUSBAND 1 ipsec-isakmp crypto map
  defined peer 10.1.1.1
  Set transform-set 3DESHMAC
  match address WifeToHusband
  !
  !
  !
  !
  !
  !
  interface FastEthernet0/0
  address 192.168.3.1 IP 255.255.255.0
  automatic duplex
  automatic speed
  card crypto TOHUSBAND
  !
  interface FastEthernet0/1
  10.2.2.1 IP address 255.255.255.0
  automatic duplex
  automatic speed
  !
  IP forward-Protocol ND
  !
  !
  IP http server
  no ip http secure server
  !
  WifeToHusband extended IP access list
  ip licensing 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255
  !
  !
  !
  !
  !
  control plan
  !
  !
  Line con 0
  line to 0
  line vty 0 4
  !
  !
  end

  Please provide us with 'see the crypto isakmp peer', ' show crypto ipsec his ' and 'show ip access-list' output of these two routers site2site. Y at - it all matches in ACL? Can you ping peers of each other?

  ---

  HTH. Please rate this post if this has been helpful. If it solves your problem, please mark this message as "right answer".

• Help Server port security...

  I have install a VMware View virtual security server in our environment.  I install a second vSwitch use DMZ on the host computer and it gave a new group of ports for use of the DMZ.  Security Server VM uses the new DMZ port group.  I have that a dedicated server will switch to DMZ, then back to the DMZ port on our firewall.

  Our firewall is managed by our ISP (I'm a one man IT Department in a large (for a computer scientist, in any case) environment so it helps me to deal with other tasks).  After talking with them several times, they assure me that everything is configured correctly so that there must be a problem with my VMware setup which I don't see.

  I have an external IP address dedicated to security server I've had linking an internal IP on a DMZ subnet dedicated by the first paragraph.  I open ports UDP and TCP 80, 553-4172 for security server and also to pass these same ports on our view connection server that is located on our private network.  (I've changed port 443 by default to 553 as my original thought was that something must be blocking 443 on the side of VMware)

  I am with them in that port rules are simple to set up-side firewall so I do not know there is no problem, especially after talking with four different technicians who all looked Setup and confirm that it was accurate.

  If I do a scan of port of the outer harbour, 4172 appear as being open, but when I scan port 553 it is closed.  This drives me batty as it doesn't seem to be much to screw - up in terms of setting this up.

  I'm also curious how to require the use of RSA devices only for the customers who connect throug Security Server.  If I place a replica of connection to the server, will not be the same configuration be used on both servers, which means that I couldn't activate RSA on the other without having to be on the other?

  Thank you!

  Hi dyeltonDC,

  I guess you did a lot of configuration errors including an ExternalURL.

  Please go through this doc and video http://communities.vmware.com/docs/DOC-14974

  Clearly, this article explains how to configure PCoIP Secure Gateway and desktop access other components using Protocol PCoIP external network.

  Have alook at www.vmware.com/pdf/view-46-architecture-planning. PDF page 60 for detailed deployment sight firewall rules all using DMZ

  Everything should work properly once you configure the display according to these guidelines.

  -Noble