Help someone please.

Similar Questions

• I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card. Can someone help me please?

  I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card to make. Is there a way I can install and use my iPhone without needing to be activated? Can someone help me please?

  To skip the activation of sim card, you can use iTunes if you have a CDMA iPhone. However, if you have a GSM model you will need to insert a sim card to activate your iPhone (it can even be used/inactive). Here is an article that will help you determine if your iPhone is GSM or CDMA: http://osxdaily.com/2012/11/15/determine-iphone-gsm-or-cdma/

• Someone please tell me how open/read a file on my Mac OS Pro Tour/Yosemite .asf. Please help, frustrated!

  Someone please tell me how open/read a file on my Mac OS Pro Tour/Yosemite .asf. Please help, frustrated!

  of course, it's another format darn owner, so you will need a copy of Windows media player for mac.  (or VLC) there is a way to convert, however, but I suspect it will not free

  Good luck

  John B

• I can't bid on firefox or explorer. I place the cursor in the quote box, and it will not record the numbers. Can someone please help?

  I can't bid on firefox or explorer. I place the cursor in the quote box, and it will not only record the numbers. Can anyone help please thanks

  Problem solved. My husband came and noticed that the number lock has been deactivated. I can't thank you enough for your help. Hope my solution helps someone else with the same problem.

• can someone please help, unable to update or restore error-1

  can someone please help I'm unable to update or restore my iphone 5 c due to an error (- 1).

  It is usually a hardware error and you will need to get it repaired. You can also get the same message if the iPhone was jailbroken.

• I need to uninstall the iTunes 12.2.0.145 in Windows 7-32 bit, but I don't have the installation of this version files. Can someone help me, please?

  I need to uninstall the iTunes 12.2.0.145 in Windows 7-32 bit, but I don't have the installation of this version files. Can someone help me, please?

  The problem lies in a PC with Windows 7 32 bit

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• I downloaded 4 FF and now 5 and nor with my screen looks nothing like it says on the page of FF. For example, I don't have the orange FF tab in the upper left corner, I have no "PIN as app" option, nor do I view. Can someone help me please?

  I downloaded 4 FF and now 5 and nor with my screen looks nothing like it says on the page of FF. For example, I don't have the orange FF tab in the upper left corner, I have no "PIN as app" option, nor do I view. Can someone help me please?

  To get the orange FF tab, go to view > toolbars > menu bar. This should uncheck the menu bar giving you the orange button.

  Panorama is a box made of 4 gray rectangles which should be on the far right, if not once you activate the orange FF tab, right click anywhere on a toolbar that doesn't has nothing to this topic, and you should get a menu with a list of your toolbars that you can check and uncheck the box. Come on down to personalize everything down and it will open a window with all your buttons. Find groups of panorama/tab button and drag it to the toolbar of your choice.

  to pin a tab as an app, right-click on it; It is an option in the context menu.

• Hello someone can help me please? I received a call from the CTIC Tech and they gave me Anti Malver software. I would like to ask you about it?

  Hello

  can someone help me please? I received a call from the CTIC Tech and they offered me an Anti Malver software which I paid 179 euros. I would like to ask you about it?

  These phone calls, e-mails or popup messages will ALWAYS be a scam.

  You have been scammed.

  Based on your other posts, you aapear have called these criminals. You allow to access your computer?

  Note: Please stop rather create several threads with the same question, answer in one of the many other threads.

• I have problem with my iphone 5 has no 4g 3g only. in Sweden in the works of 4g Malmö... can someone help me please...

  I have problem with my iphone 5 has no 4g 3g only. in Sweden in the works of 4g Malmö... can someone help me please...

  Where did you buy this phone? 4G has already worked on this phone? Whatever the carrier said when contacting you? Have what troubleshooting you tried?

• Someone at - he had time to share their knowledge. Help needed please

  Dummy here... Power forgot password, can someone please help... disabled system, 86170734

  Hello:

  Enter the unlock code...

  39858310

• someone please help me restore the photos deleted from my camera sony cybershot

  someone please help me restore the photos deleted from my camera sony cybershot downloading on computer. Are there any hidden folder in drive g as basket in pc from where deleted photos can be restored

  N ° when the photos are removed from the Flash of the camera, they are gone.

  If you have not done something since then with the camera, you can download the software on your computer that may be able to recover deleted photos, or you can send the somewhere flash memory card that can do it for you.

• Someone please help! Lenovo thinkpad e440

  I really need help. I am a veteran of the U.S. Army who served two tours in Iraq and a deployment in Afghanistan. I am also a single father of two with a daughter in 7th grade and my oldest daughter in her first year of collage. Recently, my daughter in collage had his car broken into and they stole his mobile phone. I can't afford to buy him a new one, but I have a lenovo thinkpad e430, but when I turn on it will display the thinkpad and logo on the bottom of the screen says to stop start normal hit enter. After one or two seconds, the screen goes white, except for a small lock icon and a cursor flashing in the upper right. IM assuming he wants a password but I have no idea what it is. Can someone please walk me througj how this thing works for my child?

  The laptop is an e430

• HP Pavilion HPE 1090 t: could someone help me please... Desktop HP Pavilion HPE h8-1090 t CTO - PSU replacement/compatibiliy

  I just bought a new power supply (Corsair CS650M) because someone has suggested that it would be a good replacement power supply for my HP model which is HP Pavilion HPE 1090 t.   I need to know if this Corsair works and is compatible with my system, because something is not working with him directly or I did something wrong.    This is my first install and when it comes to the ins and outs of power amplification entry & exit and amperages I get so confused about this stuff.   But I think I took all the pluged connection correctly, at least when I re-plugin my old PSU after the installation to fail, I had the PC working again, what made me give confidence that I did the Corsair install correctly.  But what happens is after the installation of the unit from Corsair and turn the system he clicked power off after about 10 seconds or more and then restarted after a few seconds, then stopped again and turns off after another 10 to 15 seconds, and nothing would come up on top of the screen no more.   The first time I did the research what PSU would be compatible, I was getting conflicting results with a few places on the net saying that the majority of the HP out there (excluding some models such as the slimline) could be replaced by different manufacturers and higher power PSU, while other places I looked different.   Even the person who recommended me this power supply said in his post that he installed a Corsair HX650 model in its HP PC, and it worked very well for him.  Now, after the failure of the installation for the next few days, I did a lot more research and when I went on the site of HP and looked up the specifications of the model my PC I noticed under the power supply section, he had a heading that says "must select one of the following options" (in fact most of the different sections shows that the title too) and then he showed only two options 460W and 600W.  Then he asked me if it's the only option I get with my model.  And then I looked at my model number HP on the HP PartSurfer and under the section of the PSU, it also registers only 460W and 600W.   So who is?   I have to stay with only these options two HP or can I get a power supply with a higher power a bit then 600W from a different manufacturer that is what I want.    If I can get something that is compatible other than the options listed HP please let me know, or if this Corsair should work someone please let me know.   I need to return it otherwise.    My specs are below.

  Thank you Aaron

  HP Pavilion HPE series
  Model No.: h8-1090 t CTO Desktop PC

  Name motherboard manufacturer: IPMTB-TK Pegatron HP/Compaq name: Truckee

  PIC of the motherboard link: http://support.hp.com/us-en/product/HP-Pavilion-HP E-h8-1000-Desktop-PC-series/5080764/model/5117795...

  Original HP installed: AMD Radeon HD 6570 (Bronco) graphics card 1 GB Model: 648533-001, SP # 659355-001

  Link video card PIC: http://www.ebay.com/itm/111761368505

  Nothing has been added/modified recently real system.  Last change was the beginning of the year 2015, which was a new 2 TB HDD and added however problem memory only started about 3 weeks ago.  The Interior has been cleaned (diffuse can)

  600W Μatx Estar v5 HF PSU (Petrus)

  Information about the current hardware out of the Power Supply Unit

  Switching power supply
  Model: DPS-600WB A
  Part number: 633186-001
  600W power MAX

  Output: DC output rating (new Corsair PSU)

  + 12Va = output DC 16A = + 3.5V / + 5v / + 12v /-12v / + 5vsb

  + 12Vb = 18 a Max Load = 25 a / 25 a / 51 / 0.8 a / 3a

  + 12Vc = 12 a Max comb = 130W / 612W / 9.6W / 15W

  + 12Vd = 10A power Total Power 650W

  + 16 5.08V = side of AC input

  + 3, 3V = 15 a AC input: 100V - 240V

  + 2 5.08Vsb = current: 10A - 5A

  -12V = 0.3 frequency: 47 Hz to 63 Hz =

  Entry:

  100-127V ~, 50-60 Hz, 10 a

  200 - 240 v ~, 50-60 Hz, 4A

  You are welcome.

  Although there is a limit to the amount of power that is needed to power your computer, it uses only the amount of power it takes to power the computer correctly.  The extra power is kept in reserve for the purposes of art.  Thus, you cannot really bad the computer with extra power or amperage.  You can sleep on this point.

  Indianaak wrote:
  

  Thank you very much for your quick response, I wasn't getting anyone to answer the previous post.

  If your saying these HP spare parts are not exclusive to the company?  Some connectors may be owners, but most are not.

  It should work then?  Yes.  I've recommended hundreds of the PSU in the years I've been helping on the Forums; in fact since about 2002.

  How about the input/output & amperages of note that I registered?  As I understand not all this jargon, I want to assure you that I have / using correct notation for my system.  I don't want to fry one of my compondents with to much amperage.   Well, either I did something wrong installing or this power supply is a dud then.  Read my explanation at the top of the page.

  As I said before I pretty sure I had all the right connections, what can you tell me if it sounds right for you.  I have pluged in both connectors wired on the motherboard which were the main ATX 24pin power connector and the EPS/ATX12V 8 pin which I shared and pluged a piece of the cable labeled 'CPU' in slot 4 pins on the montherboard labeled ATX CPU.  Regarding the other split 4 pads, I don't see anywhere, it could be pluged into the motherboard.  If two 4-pin connectors were even marked, it should be good.  However, you can try to plug the other 4 pin instead of this, just to make sure that the right pair is connected to the processor power.

  My AMD Radeon HD 6570 1 GB graphics card is the type that is fed through the MB so I didn't use any of the PCI-E cables 6-8 poles.  It is very good.

  And so the only thing I had left that I have pluged the compondents of Sata cables that was my Bluray burner, my 2 TB hard drive and my USB 3.0 card.  They are very frank.

  Yet once again being installation of hardware in my system let me ask hopefully not a stupid question, but when you connect compondents Sata cable, you must have the plug-in in a particular order of wiring compondent or how do you?  I don't check the specifications of your power supply, but I think most of them have a single 12V rail.  If this is the case, you don't have to connect them to any order.  If there are two rails, it is best to divide the power of each rail.

  On my old PSU, it has an extension cable SATA used to connent card USB 3.0 which is pretty tightly squeezed between graphics card and sound card, so I guess I could use the extension cable with the new PSU POWER Sata wiring without any compatibility also publishes, right?  This should be no problem I can think of at this point.

  Thanks again for your help, I'll probably will try and plug it once more and see if I can make it work.  If this does not work for now, I strongly suggest that you contact Technical Support of Corsair for help.  They are the experts on their products and grab any errors that we do.  It is very difficult to diagnose a problem by far.  When you have done with this project, you will no longer be the excuss you are a novice. You will have a lot of knowledge that you did not when you started.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• For Windows XP (KB973768) security update will not be installed. Could someone help me please?

  For a few months now, I constantly had the small yellow shield in the right corner of my screen telling me that an update is available for installation. Whenever I tried to install it but it fails. I tried just shut down the computer and let him move on his own, but that does not work either. I know it is probably not a security threat huge or essential to do my computer function properly, but it's a nuisance for me, and I want to solve it if possible. Apparently my computer is updated on everything with this exception. My OS is Windows XP Media Center Edition SP3. Could someone please help me to install the update or remove the constant reminder to install it?

  ijones32,
  I suggest that you try the following, then post back with the results.

  Solve Windows Update installation issues

  Troubleshooting Windows Update: offered on several occasions to update

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  @cinziac (who has not declared his complete version of Windows):

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft