TestStand deployment error Code 1055 when using LabVIEW storage VIs

Similar Questions

• Get the error code 28 when using my LG U8120

  Original title: I'm looking 4 a driver for a lg u8120. In my device manager, because the device has a little yellow!, I right click on it and go to its properties. It is 28 error code. Help, please!

  The error msg shows the location of the port is: Port_ #0002.Hub_ #0004, but I cannot figure out where is this place, or even if its where I need goWhen, this phone came out the last system is windows xp, and my computer is Windows 7.

  Hello

  1 are you getting error code 28 in Windows XP or Windows 7?

  2. you did it before the issue of any material changes or software?

  Method 1: Explanation of error codes generated by Device Manager in Windows XP:

  http://support.Microsoft.com/kb/310123

  Method 2: How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  If you are running Windows 7, please follow the steps in the below link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Download the appropriate driver and support tool for your mobile from the site of the manufacturer:

  http://www.lg.com/ae/support/product/support-product-profile-mobile-redux.jsp?customerModelCode=U8120&matchedModelCode=NOT_MATCHED&searchEngineModelCode=U8120&initialTab=documents&targetPage=support-product-profile

  Kapil Purohit - Microsoft

• I get an error code 10 when using the network card.

  Hello

  When you use my internet dongle all my ports usb stopped working. cards network is to come up with and error 10 code. I uninstalled the adapter and re installed however it is always delivered with the same code. If I try to update it says I'm updating but the card still does not work

  Hi Sinead,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  "Code 10" error is generated in the Device Manager in one of the following situations:

  -Device Manager cannot start the device.
  -One of the pilots who needs the unit does not start.
  -Device Manager has sufficient information to recognize the error that spread upwards by the device driver.

  Note: in this case, the "Code 10" error can be a very generic message indicating some sort of unspecified driver or device problem.

  I suggest you run this Microsoft fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems

  I hope this information helps.

  Please let us know if you need more help. We will be happy to help you.

  Thank you

• Error code 800b0100 when using windows update

  Installation of Vista 32 bit, most of my windows updates do not settle. The files downloaded through Windows Update, which is set to be installed after asking, not automatically.  Update process begins, progress window moves toward completion, then at one point in the installation stops and the status display indicates failure of the installation.
  I could not install the updates for Vista Home premium 32-bit system.  Downloaded the State of preparation of system tool update, which the log file reports 5 errors, which seem to be missing files.  Question is how to get and install the missing files?

  Here's the extract log report:

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_1_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB957321_client_0~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB957321_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB957321_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 1989
  Found 5 errors
  CBS MUM lack count: 5

  Unavailable repair files:
  servicing\packages\Package_1_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB957321_client_0~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB957321_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB957321_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_1_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB957321_client_0~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB957321_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB957321_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.cat

  Interesting answer.  Anti Virus is McAfee Security Center v 9.15, last updated 19/11/09 (interesting to note that it is not updated since then...)

  You see the effects of 2 months-plus hijackware infection.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the page following before otherwise connect the machine to a network or the internet and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get the error code 646 when you try to download the update of April 10

  I am trying to install an update in April 10,2012 and the code646 of error appears and it let me download the update? What should I do?

  Hello

  1. what day you're talking about?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/2258121

• Error code: 80070424 when you try to use Microsoft Update

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  If you believe that you have done this with the same applications or applications, follow the instructions in the order, exactly...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you'll use the aggressive version - if requested):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Error code: 80073712 when installing vista SP2 by using windows update.

  Original title: Windows Update error code

  I get an error code 80073712 when installing vista SP2 with windows update, how to fix this?

  Hi Mike,.

  You can try the steps in the following article and try to install the stand-alone package for Windows Vista SP2.

  Error code 0 x 80073712 when you use Windows Update or Microsoft Update to install updates

  For more information, you can also consult the following articles:

  Windows Update error 80073712

  Learn how to install Windows Vista Service Pack 2 (SP2)

• I'm 150:30 error code and when I try to use my AI CS4 and AE, PS.  I tried to uninstall and reinstall but same code

  I'm 150:30 error code and when I try to use my AI CS4 and AE, PS.  I tried to uninstall and reinstall but same code

  Press on enter and see what happens.

  When you are finished

  Exit the Terminal and try to launch your programs.

• I get the error code 8007005 when downloading updated 951847

  I get the error code 8007005 when downloading update 951847. It produces about 60-70% of fact. I tried a few times and still nothing. I have an Acer Aspire M5620 running Windows Vista hope first Edition, SP1. I use the automatic updates. I tried following the instructions on changing permissions, but I do not have the same path as in the answers here. He said that this is an important security update. Any help appreciated.
  I tried to use Mr. FixIt and he could not run the error code giving 2838

  Hello Redbiker_co,

  Method 1: -.
  Please download Windows Installer CleanUp utility from the link, below
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  After installation, run the tools by clicking Start--> Programs--> Windows Clean up.
  On the inside of the window, you will see different installed versions of the .NET Framework. You should choose & Remove only that versions of the .NET Framework, that fails to deploy every time-for which you receive error code. (i.e. you should only remove .NET Framework 3.5 & its application solutions packs)

  Then, restart your computer and manually install the following updates in the order
  (1) package Microsoft .NET Framework 3.5 from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en

  (2) Microsoft .NET Framework 3.5 Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ab99342f-5d1a-413D-8319-81da479ab0d7&displaylang=en

  (3) now, download the KB951847 patch manually.

  Method 2: -.
  Error code: 8007005 means of problems with permissions. Please perform the procedure below

  Run cmd.exe with administrative previlliges (right click on this file as an administrator)
  and type: secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose

  Now restart your computer & try to visit the Web site updated Microsoft or try to download the file manually from the link below

  If no help verify the steps using the link below
  http://update.Microsoft.com/microsoftupdate/v6/showarticle.aspx?articleid=13&ln=en

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  --

• Error code 1 when writing to text file

  I have an error code 1 when I try to write to a text file in my application. Really, I don't understand and don't know how to solve this problem.

  If anyone can help me please fix this, it would be greatly appreciated!

  Do not close the file in the box 0.  It closes only after your while loop ends.  Keep your refnum file stored in a shift register.

  My guess is that you open the file outside the while loop and you pass in the refnum and use it in the box 0.  Then you close the file that kills the refnum.  Then, you open the file again (possibly automatically with read) then close that.  When you get to the enclosure 1, you use the same refnum you originally opened up to the outside, but that was closed and is now invalid.

• I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this?

  Ideas:

  • You have problems with programs
  • I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this? messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• error code 66A when you try to install update MS10-077

  I can't install this update... tried several times.

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

• get error code 80072efe when windows tries to update

  I keep gettig error code 80072efe when windows tries to update can't seem to know what means this code anyone can help

  Hello

  When you use the Windows Update Web site or the Microsoft Update Web site to search for and install updates, you may receive this error code.

  I suggest that you follow these steps/methods of the article below and check if the problem persists.

  http://support.Microsoft.com/kb/836941

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I encounter an error code 52D when updated security installed for mircosoft work 8 (KB973636).

  I always install the update to my Windows vista through the automatic update system, but recently I encounters an error code 52D when updated security installed for mircosoft work 8 (KB973636). Please help someone... seem micrsoft don have send to asked but rather as a forum here... Please... wat to do...

  Steve,
  You have Microsoft Works 8 installed and you use it?  If this isn't a program you are using or you thought it had been uninstalled and then run The Windows Installer Cleanup utility and see if you are able to completely remove the work.  This would then cause the update will not be presented.   Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  I've read other discussions on error code 80242FFF.  Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit.  Also, I started my computer in mode safetboot and tried to update.

  They did not work.  So, will you be able to help me find a solution?

  Thank you

  Ken

  Hello

  1. is that the copy of windows is enabled?

  2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?

  I suggest to perform the steps in the following article and check.

  Method 1: run the Windows update troubleshooting tool and check.

  The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/

  Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.

  To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
  http://support.Microsoft.com/kb/929135

  
  Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

  Method 3: If the problem persists, follow the steps in the following article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

   

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

  How to back up and restore the registry in Windows

  b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  For reference:

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )