Help the positioning image please

Similar Questions

• Help the position of the tabs

  Hello. Since the Firefox 20 update, I noticed that the "tabs" are right along at the top of the screen now, that I can not enter because I use Dell Desktop for my shortcuts in, coming down in front of them. It used to be fine when he was just a little lower, but at the same time I don't want to 'menu bar' on as it grows TOO low for my smaller screen. How can I get back to the position they where, just below the organge "Firefox" button as apposed to the appearance of it without recourse to the deactivation of Dell desktop?

  If the window is maximized you can toggle this pref to disable the display of the tabs in the title bar:

  • browser.tabs.drawInTitlebar

• side is applied to ALL, not only the active image - please help.

  Seemingly out of nowhere a particular feature in LR ceased to behave the way she normally does it for me.

  When I'm in the notice of inquiry (in library mode) and I have a number of images selected because I'm doing my selections, it suddenly started apply my star rating for all 10 images, I chose and not only the one that is active . It's very strange - I've never seen behave like this before. I don't remember hitting something or change any settings, but he just seemed to have started from nowhere.

  It seems that if I 'manually' click on the star scale that appears when you mouse over below each image, THEN it will apply to the star to just an image, but I can just is more hit the '5' - key and have just an image which is active get 5 stars. He does it at all.

  I tried just to restart LR, but which has not changed anything. Please please help as this is really mess up my workflow.

  Thank you

  Robyn

  I visited the next page to confirm that it should indeed not be behave in this way:

  http://help.Adobe.com/en_US/Lightroom/using/WSEEE8FD0F-DFD8-47D0-A6FE-DD726E5F2E1A.html#ws 11A1E98C-3D8D-47b5-8335-4B9D8C3A5D36

  It is in the middle of your list on your screenshot, but you two select two files to make it active, so you can clear the check box.

• Helps the bad Image DLL C: Windows

  Help can some please tell Me what I have to challenge these error messages whenever I connect to my pc I get them

  1 Logi_MwX, Exe - bad Image

  The application or DLL C:\WINDOWS\system32\tuvtttTN.dll is not a valid WINDOWS image

  Check against your floppy installatioon.

  2 rundll32.exe - bad Image

  The application or DLL C:\WINDOWS\system32kuwmaayk.dll is not a valid WINDOWS image

  Check this against your installation diskette.

  3 RUMDLL

  Error loading C:\WINDOWS\system32\kuwmaayk.dll

  %1 is not a valid Win32 application

  Hello You did changes to the computer before the show? Method 1: A clean boot allows you to check if startup item or services to third-party application is causing this issue. Reference: How to configure Windows XP to start in a "clean boot" State: http://support.microsoft.com/kb/310353 Method 2: Sometimes rundll32.exe might be a form of the virus. I suggest you make a system full scan just to be sure. , Note 1: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. Note 2: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. Here is a link that will give you information on how to perform a full scan of the system: http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Help the smart correction please!

  I put a video in my time line and adobe said there was something wrong with my clip and I would change it with smart fix. I said yes and no longer display new message... Needless to say that my video was so much that I want to see this message or I need a way to trun disable smart fix eddited. Please need help can not find an answer anywhere!

  If you selected the option to not see the message again, this is the last you will see of it (until you turn it on again in the program preferences).

  In the meantime, the best way to remove the changes is to remove the clip in your timeline, add back your media project Panel.

  There are other ways - such as manually removing the effects in the properties panel - but it is the easiest.

• Help with this image please.

  Hello

  I'm new to PS 2015.5 and I can use the new ' select and mask "tool origins white and fair, but can not make a decent mask in this photo. I have to use another method beyond the narrow new edge can act? I try to clean the worse it becomes.

  Thanking in advance.

  

  

  As the background is complicated you will need to use different ways to select the object, otherwise I suggest to use the pen tool and cut it out manually.

  Photoshop: SHARPEN the EDGE & SELECTION QUICK - YouTube

• The signature image appears in the actual signature.  Print Preview, it shows that?

  Hi, I'm very new to using Adobe and you want to use for electronic signatures to reduce paper

  and increase efficiency.  I could use help so that he can work with the display of my name.  I tried to change the signature to display an object, a file that displays my handwritten signature.  The overview shows that I have attached it properly, but when I try to sign a document he continues to show my name instead.  I tried several times, again.  Fixing .jpg then tying in a .pdf file.  The overview continues to show what it will look like, but still the default signature in my name to uppercase for a reason any.

  HELP the newbies to please.

  In the signature dialog box (which appears when you click the signature field) you see the drop-down menu allows you to choose the new signature?

  

• The position of the clip support keyboard B575 - need help, please

  I lived an intermittent problem with some of the key - sometimes they work and other times I have to press several times so that it can work. I thought it would be a loose keyboard connector so I opened and removed the Ribbon of the connector by gently lifting the retainer clip until he published. I reinstalled the Ribbon connector and tried to get retainer clip back on. He won't and I worked at home all day. The clip has a small protrusion at each end and I tried different directions - no luck. Can you tell me or show me with images the correct procedure for the locking of the water of the keyboard on the main map. It's driving me crazy and the maintenance manual does not show how it should be done. The clip is not in place before inserting the Ribbon? Please help and thank you very much.

  Hi dbw001lc,

  Welcome to the Community Forums of Lenovo!

  There are two types of lock I've seen so far for slick keyboard,

  1.

  

  2.

  

  To unlock fig.1 is pulling up then that is when you insert the cable, and then pull down to lock

  Fig. 2 Unlock is when you lift the top then keyboard then close.

  You can try unlock code and locking Clips when there is no cable yet, which is to check if there is a problem with the retaining clip because it must open and close properly with problems with any cable.

  Hope this helps,

  Cheers!

• Please help; Impossible to change the position of my wallpaper!

  I know this isn't a big problem; but I would like it's working properly anyway.  I tried a new image for my wallpaper, and it showed as an image full screen.  I didn't like it then, immediately, I went back to the original image, and it was too full screen.  I went to the desktop background and the position is as I've had with a frame black (I also tried other colors) around the image, but it was not of themselves.  I tried all the different positions and nothing will change.  The image will change, but any image I try is full screen.

  Hi Newsie,

  You can try the following steps and check.

  Method 1:

  You can read the following article and try the methods provided except method 6 and see if it helps.

  Impossible to change the background image in Windows 7

  Note: This article also applies to Windows Vista.

  Method 2:

  You can also try to change the theme of Windows and check.

  Change desktop theme

• I bought a stock image and I can't seem to upload the image under a license without the watermark? Please help

  I bought a stock image and I can't seem to upload the image under a license without the watermark? Please help. When I download the image is the watermark, excuses that I'm a novice, the Image is listed as a license in my library

  Connect to Adobe Stock and you will see at the top right must look like this...

  

  Click on the "Images" button This will take you to the history of the license.

  

  Click on the thumbnail of the image to go to the image details page. You will see a download link. You must use the download link or add it to your an application project management libraries like Photoshop, InDesign, Illustrator, etc, to use the image without watermark.

  

  I hope this helps. :-)

• I just started using dreamweaver cs5 and image width = "3507" height = "2480 appears correctly on my page how to solve the this.someone please help

  I just started using dreamweaver cs5 and image width = "3507" height = "2480 appears correctly on my page how to solve the this.someone please help

  I played around the waist ut still not put the page to display properly

  The time has come to show us the code. It is best done by providing a link to the site, if you could post the HTML code and CSS here for us to have a look on.

  What you did until now, is an image that is limited in its container, a container that is much narrower than the width you are aiming for.

• I can't install premium photoshop design.  Once downloaded and I click on the file, it says "unrecognized image' Please help

  I can't install photoshop Design Premium.  Once I spent hours to download and click on file, it says "unrecognized Image' Please help

  Download again using another browser and possibly choose a better location to download if the file is not corrupted.

  Mylenium

• Missing images in the final product - please help!

  I use Adobe Premiere Pro CS4 to make a video trip to about 18 minutes long. This is my 11th video trip I did and the first time running on this particular problem.

  I have done editing and exported to my usual settings: H.264, 1080 p, VBR 2 Pass audio 320 bit, etc..

  The travel film is 90% video and photos at 10%. In the final product, everything works fine, including audio / music and title stills (above), but SOME shows photo images upward like a blank black screen. Even the video transitions to work, but their transition in a black screen and transitions smoothly into the next video.

  I exported now 5 times total, each time you export taking about 19 to 20 hours. Each time there are DIFFERENT images that are missing. Sometimes the image previously missing will appear in the next export, but the picture that appeared in the previous export is missing in the new. I don't understand why this is happening and I'm beyond frustrated. I'm not about to lose another day without my computer export failure.

  I'm guessing that this has nothing to do with the size of the image, but with the speed/performance of my computer 'old '. I am hoping that there is a way out of this because I spent ten days of working on this video...

  Please help if you know the solution to this problem - maybe I'd appreciate much all tracks!

  > guess that has nothing to do with the size of the image

  Maybe... but try to scaling of images to match your video before importing it

  Photo graduation for video http://forums.adobe.com/thread/450798 can help

  -HiRes images of DVD http://forums.adobe.com/thread/1187937?tstart=0

  -Body Crash http://forums.adobe.com/thread/879967

• With the help of fluidity, while using the gel mask, suddenly the whole image became red.  Now, can not cancel to be able to work with it.  Help, please.

  I must have pressed something that does that.  The whole image is now covered in red like a gel mask.  I don't know how to cancel it.  If I cancel and try to reboot, when I load the Liquify Filter again, it takes me to the same red image.

  Try to use only a small part of the image when moving to fluidity rather than the entire document.

  Using the marquee tool, select a part of the whole image you want to edit in the fluidity.

  It is much easier for the graphics driver and the OS to process and sort of the recommended method for improved workflows.

  If you have an image open in Photoshop 80 MB, and then you open fluidity, this set 80 MB opens in fluidity.

  If you marked a small piece of the complete picture, let's say 1/8th of it, then only 10 MB gets opened in fluidity.   Computers as it is smaller.

• How to draw and the positioning of images in FieldManager using the method object?

  How can I add and the positioning of my images in the position desired in FieldManagers?

  I need to add more than 2 fields (HorizontalFieldManager/VerticleFieldManager) in my application and I draw an image using the method of painting ovverided.

  NOTE: The image will be established if I do not use mainScreen.add (SeparatorField ()) or mainScreen.add (hori2), see below.

  If I use mainScreen.add (mainScreen.add (hori2) SeparatorField ())... n then the horizontalFieldManger won't be empty, drawn in the output screen.

  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.container.*;
  import net.rim.device.api.system.*;
  
  public class BackgroundImage extends UiApplication
  {
      private Bitmap backgroundBitmap;
      private Bitmap fieldBitmap;
  
      int width, height;
  
      public static void main(String[] args)
      {
              BackgroundImage theApp = new BackgroundImage();
              theApp.enterEventDispatcher();
      }
  
      HorizontalFieldManager hori2;
  
      public BackgroundImage()
      {
          //The background image.
          backgroundBitmap = Bitmap.getBitmapResource("jalan_logo.png");
  
          MainScreen mainScreen = new MainScreen();
  
          hori2 = new HorizontalFieldManager();
  
          HorizontalFieldManager horizontalFieldManager = new HorizontalFieldManager(HorizontalFieldManager.USE_ALL_WIDTH | HorizontalFieldManager.USE_ALL_HEIGHT){
  
              //Override the paint method to draw the background image.
              public void paint(Graphics graphics)
              {
                  System.out.println("come to here..!!");
                  width = graphics.getScreenWidth();
                  height = graphics.getScreenHeight();
                  //Draw the background image and then call paint.
                  graphics.drawBitmap(width/2, height/2, 150, 40, backgroundBitmap, 0, 0);
                  super.paint(graphics);
              }            
  
          };
  
          //The LabelField will show up through the transparent image.
          LabelField labelField = new LabelField("This is a label");
  
          //Add the manager to the screen.
          mainScreen.add(horizontalFieldManager);
  
         mainScreen.add(new SeparatorField());
         mainScreen.add(hori2);
         hori2.add(labelField);
  
          //Push the screen.
          pushScreen(mainScreen);
      }
  }
  

  Help, please.

  I have already pointed out the problem with USE_ALL_HEIGHT in first Manager add you to the form. Drop this style bit, otherwise sublayout your screen will generate an exception, and nothing appears!

  If you want HorizontalFieldManager to be of a particular size, regardless of the height of managed fields, replace its sublayout:

  HorizontalFieldManager fieldManagerTopBanner = new
           HorizontalFieldManager()
  {
       protected void sublayout(int maxWidth, int maxHeight) {
          super.sublayout(maxWidth, maxHeight);
          int myDesiredHeight = ;
          setExtent(getWidth(), Math.min(myDesiredHeight, maxHeight));
       }
  
       protected void paint(Graphics g)
       {
            // g.setBackgroundColor(0x000000);//blue
               g.drawBitmap(100, 150, 100, 200, jlnLogoImg, 0, 0);
  
            //g.clear();
              super.paint(g);
       }
  };