help to the development of a script of locking

Similar Questions

• I need help on the matrix of action script 3.0

  I need help on the matrix of action script 3.0

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  to apply a matrix for mc mat oppose:

  var mat: Matrix = new Matrix;

  mat.a = Whatever;

  mat.b =

  mat.c =

  mat.d =

  mast. TX =

  mat.Ty =

  MC. Transform.Matrix = Matt;

• Request for help with the output of a script

  Hello

  I need assistance with the output of a script. I have a script that retrieves advanced config of the esx hosts in a cluster and exports to a txt file. Here is the script I use:

  $Decimals = 1

  $VCServers = @)

  $VMSummaries = @)

  $InputFile = "VCs.txt".

  1. Read the input file, loop of VCs

  Foreach ($VCname in Get-Content $InputFile) {$VCServers += $VCName}

  Foreach ($VCServer to $VCServers)

  {

  $VC = to connect-VIServer $VCServer

  $VMhosts = get-VMHost

  Foreach ($VMHost to $VMhosts)

  {

  Write-Progress "Collecting information in $VCServer" 'connecting to host $VMHost' - Id 0

  $VMSummary = "" | Select the host name, TCPIPHeapMax, TCPIPHeapSize, HeartbeatTimeout, HeartbeatFrequency, HeartbeatMaxFailures, MaxVolumes

  $VMSummary.HostName = $VMHost.Name

  $VMSummary.TCPIPHeapMax = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name Net.TcpipHeapMax). Values

  $VMSummary.TCPIPHeapSize = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name Net.TcpipHeapSize). Values

  $VMSummary.HeartbeatTimeout = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. HeartbeatTimeout). Values

  $VMSummary.HeartbeatFrequency = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. HeartbeatFrequency). Values

  $VMSummary.HeartbeatMaxFailures = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. HeartbeatMaxFailures). Values

  $VMSummary.MaxVolumes = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. MaxVolumes). Values

  $VMSummaries += $VMSummary

  }

  }

  $OutputFile = "AdvancedNFS.txt".

  $VMSummaries | Format-Table | Out-file $OutputFile

  This script runs without any problem and generates a text file that looks like this:

  TCPIPHeapMax TCPIPHeapSize HeartbeatTimeout HeartbeatFrequency HeartbeatMaxFailures MaxVolumes hostname

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  -

  ---

  abcd1 abcd2 abcd3

  I am trying to output a csv file and run into a problem where each host values are not displayed correctly. I replaced the last 2 lines in the script as follows:

  $OutputFile = "AdvancedNFS.csv".

  $VMSummaries | Export-CSV $OutputFile

  My output looks like this:

  Host name	TCPIPHeapMax	TCPIPHeapSize	HeartbeatTimeout	HeartbeatFrequency	HeartbeatMaxFailures	MaxVolumes
  ABCD1	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection

  What I am doing wrong?

  Thank you

  Alex

  Hello

  You can try changing your script like this:

  • -Replace "." "With values '-["'-']. "

  • -Optimize calls to Get-VMHostAdvancedConfiguration

  Your code will look like this:

  ...

  Write-Progress "Collecting information in $VCServer" 'connecting to host $VMHost' - Id 0

  $VMSummary = "" | Select the host name, TCPIPHeapMax, TCPIPHeapSize, HeartbeatTimeout, HeartbeatFrequency, HeartbeatMaxFailures, MaxVolumes

  $VMSummary.HostName = $VMHost.Name

  $VMHostAdvancedConfig = get-VMHostAdvancedConfiguration - VMHost $VMHost - name Net.TcpipHeapMax, Net.TcpipHeapSize, NFS. HeartbeatTimeout, NFS. HeartbeatFrequency, NFS. HeartbeatMaxFailures, NFS. MaxVolumes

  [$VMSummary.TCPIPHeapMax = $VMHostAdvancedConfig\["Net.TcpipHeapMax"\]

  [$VMSummary.TCPIPHeapSize = $VMHostAdvancedConfig\["Net.TcpipHeapSize"\]

  $VMSummary.HeartbeatTimeout = $VMHostAdvancedConfig\ ['NFS. HeartbeatTimeout '\] '.

  $VMSummary.HeartbeatFrequency = $VMHostAdvancedConfig\ ['NFS. HeartbeatFrequency '\] '.

  $VMSummary.HeartbeatMaxFailures = $VMHostAdvancedConfig\ ['NFS. HeartbeatMaxFailures '\] '.

  $VMSummary.MaxVolumes = $VMHostAdvancedConfig\ ['NFS. MaxVolumes '\] '.

  $VMSummaries += $VMSummary

  ...

  Kind regards

  Dimitar

• Need help in the development of different customized reports for SCCM 2012 using the Report Builder version 3.0

  Members of the Group of respected

  I need your urgent assistance to solve my problem, if someone who at least somewhat or large information please help me.
  My problem is related to SCCM 2012 and SQL server 2008.
  : - I have to develop a custom reports for SCCM 2012 for one of my clients. I have configured all the settings required for preparing the report, and I have examples of reports provided with sccm 2012.
  I get the problem while developing new relationships, if I have examples of reports that I have studied the corresponding reports. I don't get detailed information from the database to create query and get the desired result. As I have not idea of detail of this database structure in it.
  So I need help to create the query as I am new on this database.
  If anyone understand please give me help or link where I can build the report
  Thanks in advance.

  Forums for this product are here: http://social.technet.microsoft.com/forums/en-US/category/configurationmanager/

• Help with the data store migration script

  Hey everybody,

  I am currently responsible for the migration of disks in new storage. Each virtual computer might have multiple disks on different data warehouses. The script I'm working on that will check the VM for the disks located on a certain store of data, then if necessary to migrate the disk to the new data store. However, I'm lost. I hope I'm at least on the right track. Any help is very appreciated.

  Thank you!

  $csv = import-Csv-Path "e:\scripts\hunter\vantage_qadev.csv".

  foreach ($ent in ($csv))

  {

  $ds = get-Datastore ' QADEV_OS_HUS127 * ' | Sort descending FreeSpaceGB | Select-Object - 1 first

  $vmname = get-VM-name $ent.vmnames

  $vmds = $vmname | Get-hard drive | Select file name

  If ($vmds - eq "* QADEVOS_VSP986 *") {Get - VM $ent.vmnames |} Get-hard drive | Moving-hard drive - Datastore $ds}

  Else {Write-Host "Migration without any preconditions"}

  }

  That's what I did to make it work. The fact it's supposed to I would say...

  $csv = Import-Csv -way "e:\scripts\hunter\vantage_prod.csv".

  foreach ($ent in ($csv))

  {

  $ds = Get-Datastore ' DST_PROD_OS_HUS127 * ' | Sorting FreeSpaceGB -down | Select-Object -First 1

  Foreach ($HardDisk in (Get-VM -name $ent.vmnames |)) (( Get - hard drive))

  {

  $vm = Get-VM -name $ent.vmnames

  $hds = Get - hard drive -VM $vm

  $lunname = Get-VM -name $ent.vmnames | Get - hard drive | Select-Object -Property @{N = "Datastore"; E = {$harddisk. FileName.Split("]") [0]. TrimStart("[")}}

  If ($lunname - like "* DM_PROD_OS_VSP986 *") {Get-VM -name $ent.vmnames |} Get - hard drive | Moving - hard drive { -Data store $ds -confirm: $false}

  else {Write-Host $ent.vmnames ' not migrated '}

  }

  }

  What is a better way to do it?

• This is the right forum to ask questions about the development of .vbs script?

  Please feel free to point me in a direction different/various forum as appropriate.

  My goal is to automate the replacement of the connection on a Win7 x 32 machine wallpaper using vbscript. I know which will involve a change of register, create a folder and copy my image in the new folder. I can't use a packaged solution, because it's for my PC to work (outside the unauthorized programs), and I don't want to take the time to do this manually every time I'm on another PC or a virtual PC that is cleared to a State of origin on a regular basis.

  If anyone knows a vb script that already does, it's phenomenal. If this isn't the case, I try to find the best MS community forum to ask questions of syntax when working on the VBscript code.

  Thank you.

  Thank you - this site seems to be a few articles, but research on MSDN brought me to

  http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

  That seems to be a good fit.

  Thank you!

• Support the development of a script of file-placement?

  Chip Hello Folks,

  Who we are: we are a small shop (OS X Leopard, CS4) designers in education non-profit. We use a script that was downloaded by Olav Kvern usefully in this forum, which then made us minor adjustments to, and works very well for us - it looks for a document and replaces the tag filenames inline graphics placed in a selected folder.

  We recently realized there is a situation that seems to trigger the script each time - when we have several files to be placed on a single line. For example, if the script crosses

  < < 12345a.eps > > [tab] < < 12345b.eps > > [para back]

  ... it will be the first file on the line, and then stop the script and remove the rest of the text on the line (ouch!).

  Any suggestions on how to approach this would be appreciated. Script is below.

  Thank you

  Ian Carey

  main();

  main() {} function

  myFolder is Folder.selectDialog ("select a file");.

  If (myFolder! = null) {}

  myReplaceGraphics (myFolder);

  }

  }

  function myReplaceGraphics (myFolder) {}

  var myInlineGraphic, myX1, myY1, myX2, myY2, myFoundItem;

  myDocument var = app.documents.item (0);

  myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points;

  myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points;

  var myRegExp = "(?i) < <(.*)" > > ""

  myDocument var = app.documents.item (0);

  var myDoc = app.activeDocument;

  myDoc.selection = NothingEnum.nothing;            deselect all objects to avoid replacing the color of an object that could already be selected

  myDoc.pageItemDefaults.strokeColor = 'None ';   Set the color of outline by default document 'None '.

  myDoc.pageItemDefaults.fillColor = "None" / / sets the color of filling by default document 'None '.

  Clear the find/change grep preferences.

  app.findGrepPreferences = NothingEnum.nothing;

  app.changeGrepPreferences = NothingEnum.nothing;

  app.findGrepPreferences.findWhat = myRegExp;

  Search in the document.

  var myFoundItems = myDocument.findGrep (true);

  Clear the find/change preferences after the search.

  app.findGrepPreferences = NothingEnum.nothing;

  app.changeGrepPreferences = NothingEnum.nothing;

  If (myFoundItems.length! = 0) {}

  for (var myCounter = 0; myCounter < myFoundItems.length; myCounter ++) {}

  myFoundItem = myFoundItems [myCounter];

  myX1 = myFoundItem.characters.item (0) .horizontalOffset;

  myY1 = myFoundItem.characters.item (0) .baseline;

  Change the following values to change the size of the image.

  myX2 = myX1 + 72;

  myY2 = myY1 + 72;

  myFileName = myFoundItem.contents.replace (/ < <(.*) > > / i, '$1');

  CheminMonFichier = myFolder + "/" + myFileName.

  $.writeln (myFilePath);

  myFrame = myFoundItem.insertionPoints.item (0).rectangles.add ();

  Recompose text after you add the inline frame.

  myFoundItem.parent.recompose ();

  myFrame.geometricBounds = [myX1, myY2, myY1, myX2];

  try {}

  myInlineGraphic = myFrame.place (File (myFilePath)) [0];

  myFrame.fit (FitOptions.frameToContent);

  } catch (myError) {}

  }

  }

  Now replace the tags.

  app.findGrepPreferences.findWhat = myRegExp;

  app.changeGrepPreferences.changeTo = "";

  myDocument.changeGrep ();

  Clear the find/change preferences after the search.

  app.findGrepPreferences = NothingEnum.nothing;

  app.changeGrepPreferences = NothingEnum.nothing;

  }

  Thanks for posting using scripts > advanced Java syntax highlighting in the editor.

  Your problem seems to be that this regexp:

  var myRegExp = "(?i)<<(.*)>>"
  

  Gourmand and corresponds to all of the first < to="" the="" last=""> >. (In addition, the line is missing a semicolon).

  Try to replace it with:

  var myRegExp = "(?i)<<(.*?)>>"
  

  to turn off the greediness.

• need help with the development of the theme 9380

  Hello, I'm trying themes are t for the 9380 curve but when I export the Simulator shows the battery and signal twice, does anyone know how to solve this problem?

  

  is done! After a few hours and a few ring energy I correct the problem

• The procedure of procurement of the game Clash of Clans first two payments $9.99 $4.44 and the second did not gems continued with the developer of the game and they told me to resolve this ongoing problem with Apple's iTunes... help me solve

  The procedure of procurement of the game Clash of Clans first two payments $9.99 $4.44 and the second did not gems continued with the developer of the game and they told me to solve this problem continue with Apple iTunes... help solve me this problem and the compensatory jewelry

  Double-see your message, my first response to this topic tells you how to contact iTunes Support (we are fellow users): Re: the procurement process of the Clash game Clans the amount was deducted from the iTunes account and do not have t...

• Numerical simulation of e/s of FPGA on the development computer - strange results... Help, please

  Hello

  We ordered a 7851R DAQ card which we
  have not yet received and we try to simulate using the
  Setting "computer development".  However, I can't seem to get the OID
  to work properly. In fact simply opening "digital line input and.
  Example of output.VI' does not have to wait for results. What happens in the
  example of file is just, the indicators flash constantly and are not affected
  by controls. Is this a known problem and I just need to wait for my
  material or have I done something wrong?

  Thank you!

  Michael

  You don't mention what version of LabVIEW you use, but if
  you use a LabVIEW 8.6, there should be basically 3 options for
  Debug / simulate your VI on the development computer.

  The
  first is to run the VI on the development computer using random
  data for FPGA of e/s data.  I suspect that this is the option you
  currently using and only can be useful if a large number of logic in
  your VI depends on the values of the e/s database.

  The
  second option is to use a custom VI which provides FPGA simulation
  E/s data.  That sounds as if it was what you are looking for.  When you
  Select this option, you will also get a button you can
  Press to create a VI model that can be used to create your custom
  VI. If you look at the diagram of the VI model, I think that it
  should be relatively simple to understand how to insert your
  custom code.

  The third option is to run the VI on
  the host but the use of I/O of the real world.  In the latter case, a default value
  bitfile is automatically downloaded to the FPGA for you and the data is
  transferred from the device by the driver.  Of course, you cannot use
  This last mode until your material does indeed.  I hope this helps.

• Help with the Powershell script to collect logs from all domain controllers

  I am writing a script to retrieve the last 5 days of application, security and log files from all domain controllers. The script runs, but fire the logs from the local server only. The variable $Computer has all of my DC so it's the fine mark. I guess it's a problem with my line ForEach-Object, but is not error. See the below script.

  $log = 'application '.
  $date = get-date-format MM-DD-YYYY
  $now = get-date
  $subtractDays = new-object System.TimeSpan 5,0,0,0,0
  $then = $Now.Subtract ($subtractDays)
  $Computers = get-ADDomainController-filter *.
  ForEach-Object - InputObject $Computers - process {Get-EventLog - LogName $log - after $then - before $now - EntryType error | select EventID, MachineName, Message, Source, TimeGenerated |} ConvertTo-html | {Out-file $env:TEMP\Applicationlog.htm}
  Invoke-Expression $env:TEMP\Applicationlog.htm

  Thank you

  Rich

  Hello

  To help with the repost the question script to the script Center Forum

  http://social.technet.Microsoft.com/forums/scriptcenter/en-us/home

• Please help improve the JavaScript script

  Please help improve the JavaScript script

  Hello

  to increase or decrease the height of a subform, you use the following syntax in the click of + and - button

  cmdAdd::JavaScript

  _Row1.addInstance (1);

  var b is parseFloat (Subform3.h) - 6.5;.

  If (b<>

  b = 0;

  }

  Subform3.h = b + "mm";

  cmdRemove::JavaScript

  If (_Row1.count > 1) {}

  var b is parseFloat (Subform3.h) + 6.5.;

  Subform3.h = b + "mm";

  _Row1.removeInstance (this.parent.index);

  }

  This should do the trick, I hope this will help you

• Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This

  Oops... .the everything in the title... My apologies!

  Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This problem may occur when you use AMD Radeon HD 5xxx card graphics series 8xxx running versions of pilot 14.501.1003, 14.502.1014 and 15.200.1062.1004. For the Solution of the page install the AMD Catalyst 15.8 Beta Driver for Windows (posted August 31, 2015).  However, there are now a 16.1 driver... would this work with Lightroom 6buttons Photpshop CC without problem or should I stay with 15.8 beta for Windows driver (Windows 8.1.

  Thank you very much

  Paul Winstone

  Hi Paul,.

  This article was created when users have faced problem with old drivers for AMD graphics card.

  Yes, you can upgrade to the last 16.1 pilots and who should work well however, you should have 1 GB VRAM or more to take advantage of the GPU processors.

  Kind regards

  Claes

• Help change the lightness of the foreColor script

  Hello

  I would like some help with the scripts here: I am currently using this script that I found in the forums to change the brightness of the current foreground color

  *****************

  #target photoshop

  var foreColor = new SolidColor;

  foreColorH = app.foregroundColor.hsb.hue; Initial value

  foreColorS = app.foregroundColor.hsb.saturation;

  foreColorB = app.foregroundColor.hsb.brightness;

  foreColor.hsb.hue is foreColorH + 0.;

  If (foreColorB + 10 > 100) {foreColor.hsb.brightness = 100}

  else {foreColor.hsb.brightness = foreColorB + 10 ;}

  foreColor.hsb.saturation is foreColorB + 0.;

  app.foregroundColor = foreColor;

  *********************

  Modify this script to brightness-10 only the result below (red arrows), but what I really need, is to change the lightness down if the color picker is going down, as the blue goes to the top.

  Thanks much for any help.

  

  This line is incorrect. It is assign the value of brightness saturation:

  foreColor.hsb.saturation=foreColorB+0;
  

  It should be:

  foreColor.hsb.saturation=foreColorS+0;
  

• Hi, unable to do any development in LR because of the message 'develop Module is disabled"can someone please get back to me as soon as possible to help turn the Module development...!

  Hi, unable to do any development in LR because of the message 'develop Module is disabled"can someone please get back to me as soon as possible to help turn the Module development...!

  You use a MAC or a Windows computer?

  Also mention the version of Lightroom you use

  ~ Assani