Help with a stubborn page, image definition

Similar Questions

• Please help with card mother tx1000 image/information

  I have a tx1000 that just had a failure on the motherboard. A chip failed which apparently provides power to the external ac converter to the rest of the motherboard. Before I go buy a new motherboard (or a new laptop) I'll try to replace the chip that is visibly damaged. I guess that its a sort of thing pretty standard voltage regulator. The only problem is the part number was burned during the failure of the chip. (Of course, this thing is out of warranty or I wouldn't try this). I didn't get help from hp support again.

  Can anyone provide me with the missing numbers from the images below? Or just send me a picture of a high resolution map tx1000 mother? It's the chip in the red zone in the image of the whole of the Council. You can see that it is clearly damaged in close-up. I need an image with as much resolution as the close-up to read the number.

  Thank you!

  

  

  I checked the chip on my mobo and it said: 4413

  BA7YIL

  It may be useful

• Hi guys: help with 2D in 3D images

  I'm new to photoshop and I have a 3d object and some 2d on top images, they are all distinct layers. When I move the 3d object to look at it from a different point of view the 2d pics don't move with it. I tried to merge layers or linking together, but when I do I can not move the 3d object to look at from another angle, it becomes 2d in a way. Can someone help me with this? Thank you so much in advance!

  [Left the forum Cloud/Installer generic for program specific forum... MOD]

  You would need to do the 2d 3d layers layers. Then, merge the 3d layers in a unique position scene objects 3d related each other, so you could shoot the scene, and everything would be sent.

• Help with modal Skillbuilders Page close button

  Hello
  
  I try to use Skillbuilders modal Page (which is an awesome plugin) to bring up a page apex to attach files. This part works fine. but when the user clicks Close button or icon X modal dialog that I want to return a value or change the text to a link on the parent window. I've read other discussions, but I'm not able to find a way to capture that close event and perform the dynamic action on the parent page before closing the window. Could someone through some light on this?
  
  Thanks in advance
  PG

  Create a dynamic action:

  Event: Manual close [SkillBuilders Page modal (2.0.0)]
  Selection type: DOM object
  DOM object: document
  Condition: - none -.
  Scope of the event: link

  With real action:

  Identification
  Action: Run the JavaScript Code
  Execution options
  Fire when the Page loads: not verified
  Code:

  if(this.data.modalPageCloseValue!=""){
  $(this.affectedElements[0]).val(this.data.modalPageCloseValue);
  };
  

  Items affected
  Selection type: item (s)
  Article (s): (select an item. My example js manages only 1 point).

  this.data.modalPageCloseValue is the returned value/object by providing the action close modal javascript/a value object.
  For example, to create a dynamic action on your modal page

  Event: Page load
  Condition: - none -.
  Scope of the event: link

  With real action:

  Identification
  Action: Run the JavaScript Code
  Execution options
  Fire when the Page loads: not verified
  Code:

  $(".modalclose_link").click(function(){
  parent.$(parent.document).apex_modal_page('close', "this here is a literal string that will be returned. You can provide a value or object here however.");
  });
  

  Items affected
  (none)

  Note here that '.modalclose_link' is a jquery selector, you will have to customize. However, it is just an example. You could take the actual function code and use it to tell a dynamic action of a button.

  If you want to see this 'work', you can modify the JavaScript "Manual Close" and change for it to have the alert back:

  if(this.data.modalPageCloseValue!=""){
  alert(this.data.modalPageCloseValue);
  };
  

  Hope that helps :)

• Need help with copies of the image

  Hello
  
  I intend to perform online backups in the future. I use 8.1.7.4 on windows 2000 server SP2. My plan of action is:
  
  (1) take image copy of complete database Fridays 'TAG is full_bkp ".
  
  (2) take the copy of incremental backup and apply to this full_bkp.
  
  (3) I must apply this incremental backups on the computer of development on a daily basis.
  
  
  I took the copy of the image of all data files and tried to restore it on another machine. But it showed the error ORA-01152, RMAN-10031, ORA-06512.
  
  Please give me some measures specially related to the copy of RMAN image.
  
  Thank you

  >

  (3) I must apply this incremental backups on the computer of development on a daily basis.

  Hello

  If you want to apply incremental backups of machine production of development on a daily basis cannot open dev in RW mode database unless you use flashback database features.
  If you open this database in RW mode, there is no chance to upadate with incremental backup of the production.

• Need help with the Web page please

  Hi have the banner from the top of my Web page that illustrates in Firefox, but does not appear in internet explore. Clues? www.topaffiliatespro.com/wealthy_affiliate_review/

  First of all, your page doesn't have a valid document type declaration (DTD) on the first line.  This means that your page is running in Quirks Mode, which can cause unexpected results in browsers.

  To add a document type for pages in DW, click Modify > Page Properties > title/encoding and select a document type that corresponds to your coding skills.  Recommend HTML transitional.

  Secondly, you have throughout your web page, the links that point to files on your local hard drive.

  background="file:///D%7C/Documents%20and%20Settings/USER/Documenti/templates/template2/images/left_shadow.gif"
  

  These links must be resolved so that they point to files in your local site.  Correctly define a local site folder in DW before you start this project?

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• Help with master/detail pages

  Ok.. I want users to be able to update their information... Fortunately, someone showed me in the right direction on here to get started, but as I am new on this I am having trouble... I want the user to be able to click on a link change profile that will lead them to an editable form that is filled with current info... and if they change that info in the form it will change it in the comic book... I use MS Access and a single base table DB... This is the beginning of the code I'm trying to do some work:
  
  
  
  < name cfquery = 'list' datasource = "final" >
  SELECT *.
  OF project_table
  < / cfquery >
  
  < a href = "edit.cfm? ID = #query.ID #... >"
  
  
  < cfquery name = "├editer" datasource = "final" >
  SELECT *.
  OF project_table
  WHERE id = #url.ID # <-I don't understand this part. What I put here
  ...
  < / cfquery >
  
  
  < form... >
  < Entry... value = "query.aField" > <-if it was something like "list.last_first" or if it is written, and I guess I need an input field for the largest number areas I want to allow the user to update? "
  ...
  < / make >
  
  * < cfquery >
  * UPDATE...
  * ALL...
  * WHERE id = #form.id #.
  * < / cfquery >
  
  I reall am having a difficult time wrapping my head around this... Can anyone help?
  

  
  
  SELECT *.
  OF project_table
  

  
  
  SELECT *.
  OF project_table
  WHERE id = #url.ID #.<---I don't="" get="" this="" part.="" what="" am="">
  meant to put it here--->
  ...
  

  
  
  <--Should this="" be="">
  as "list.last_first" or if it is written, and I guess that I need
  an input field for as many of the areas I want to allow the user to
  Update?---><--- yes="" you="" would="" have="" an="" form="" element="" for="" each="" datum="">
  to allow editing--->
  ...
  

  
  **
  * UPDATE...
  * ALL...
  * WHERE id = #form.id #.
  **

• Help with transparent buttons on images

  I have photos of a piece of equipment and load images to slides in Captivate 3. Then using the jump to feature to do move from slide to slide, simulating a button is pushed and then what a person would see.
  
  The problem is that if they don't click on the button show advance automatically to the next slide, which is usually not the slide that they should be addressed to. do you know an easy fix for this?
  
  Thank you advance!
  

  Hi again of Serena

  Check if there is perhaps a click box already on the slide that covers the region. This could be the case if you have imported PowerPoint. If so, you need to remove this box click object. Basically, a click outside the click box should be ignored. This is why I think that you have a larger surface area behind the smallest.

  See you soon... Rick

• Help with a page advertisement in program book

  Hello

  I finished to create an ad for a book program and I cannot get it to every right impression or when I had to do it right, I now have a right margin entering the fold and I my ad goes on the margins of 1/4 on the bottom.

  First I created a 8.5 in. by 5.5 in the size of the page (size of the program book) because I will use 1/2 on this page for my ad. I finished my drawing, can it print. My design is out landscape rather than portrait standing page on the page. I think Im getting her because of the way he wants to print it.  There are no many choices in the print options to print a certain way (at least I can't find it) to say things.

  Now, after playing with that a few times, I somehow finally got to print in the top left of my paper (actually regardless if its upstairs or downstairs).  When I fold to 8.5 in. x 5.5 in and stir in half the book, I can see this is not configured correctly.  I don't know if its on my end or if it is again the printer.  The right margin runs into the spine of my paper (or a crease) and the bottom of my ad ran over the fold in the middle. My left margin is at least 1/2 "away from the left edge of my paper. I need my ad to be 1/2 a 5.5 to 8.5 in page page. The ad is sold as a whole or 1/2 page.

  My page set up is as a document.  His game as the Page size: letter - 1/2 (I don't have not defined it?), width 5.5 in height 8.5, the orientation is portrait. I have a bleeding, but I don't need it and ignore it.  Ive started my ad on higher margin lines, but I did short announcement of the right margin, in order to leave the room near the crease inside where he could be stapled. I did not define these margin lines and do not know how to change it. When I added my substantive work, I pulled down until it turns PINK that I would like to know where is the middle of the page. But my ad prints on it.

  I need this announcement at least 1/2 "away from the margin top, left and right of the page and close enough to the 1/2-page mark, but not too much.  Make sense?

  Now, just a little back to the land. Ive designed books of program in the past using Publisher.  I designed a book of the entire program, with a blanket and I had problems very few do.  Now I use InDesign for the first time to do this and a little bit here hurt.  Printing of ID stuff is also driving me crazy. Im not like the way ID prints and if I tell my Epson printer how to print, it does not work and it keeps giving me trips crappy.

  Any help would be appreciated.  I need to turn this tonight, but I can't turn in a print ready device if its not print correctly.

  Thank you

  Tina

  You must set your document size to the final size of the room, so letter - half should be good. This is a model with a placeholder text:

  

  With respect to printing, it goes, do you want it to print on the right side of a page of A4 format sheets landscape, like this:

  

  If so, create a new document format letter landscape and place the cover on the page InDesign file and place it where you want. It should display this way, but do not expect exact positioning that you think it should the printer. With most printers, the image a bit one way or another by a small amount, even move one copy to another on the same page. Not as much as you described, but other spaces, you have between the area of the image and the edge of the page (with the vertebral column), it will be less sensitive.

  Try what I hear and see if it's better left. If not, come back and tell us what happened and maybe we can help you.

• If anyone can help with how to get the image

  a database in a view using Dreamweaver page?

  I have a page with a recordset and a database with text and images. The image field has a link to the file and the image as in /images/image1.jpg including the size.

  The thumbnail I want to display on a page of the main display is in the database using varchar with a link like /images/image1.jpg

  When someone wants to see the master page, they click on a link and everything which has been entered showing the database. At least everything except the image.  Right now it shows just /images/image1.jpg

  I don't know how to call the images to the database.

  Thanks for the help and information.

  conch,

  Check the entry of the database, and you may also have too many tags...

  In addition, check to see if your pictures folder is in the root directory, such as an incorrect path can complicate things.

  If this site is located on a remote server, feel free to send me the link here or by e-mail: [email protected]

  In addition, if you have a screenshot, it would be useful.

  Hang on!

  See you soon,.

  wordman

• Need help with loading in a different place every time the page reloaded the film.

  Hello

  I have a Flash movie that I need to go to one of the 6 chosen images when say a user presses the button back or home page of the site. I don't want just the same user, see the flash movie to play again in the same place each time that they return home.

  Help with this is appreciated.

  Thanks advance.

  -Ann

  Here's what I wrote:

  var numbers: Array = [2,114,415,687,960,1195,1485];

  _root.firstTime = true;

  {if (Firsttime)}

  firstTime = false;

  The frame number: var = Math.floor (Math.random () * numbers.) (Length);

  gotoAndPlay ([frame] numbers);

  }

  I also tried this:

  Array.prototype.shuffle = function() {}
  for (var = this.length - 1; ivar ivar > = 0; ivar-) {}
  var p = random (ivar + 1);
  var t = this [ivar];
  This [ivar] = this [p];
  This [p] = t;
  }
  };
  ASSetPropFlags (Array.prototype, ["shuffle"], 1, 1);
  var Array_ar:Array = new Array (2,114,415,687,960,1195,1485);
  Array_ar.shuffle ();
  index = 0;
  function load_random() {}
  gotoAndPlay(Array_ar[index++]);
  If (index == Array_ar.length) {}
  (index = 0);
  }
  }
  load_random();

  But this Dungeon jumping whenever I hit the back of the frame 1 or refresh.

  Thanks again.

  use:

  var numbers: Array = [2,114,415,687,960,1195,1485];

  The frame number: var = Math.floor (Math.random () * numbers.length);

  gotoAndPlay ([frame] numbers);

• In fact, I need help but can't find the answer. Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as

  In fact, I need help but can't find the answer.
  Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as empty as when I open Firefox, it automatically load my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
  Thank you.

  [Personal information deleted by the moderator. Please read the guidelines and rules of the Forum, thank you.]

  Hello, please refer to customize the page new tab to turn off the function.

• Sir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!

  Question
  Sir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!

  Subject: House = without capital letters

• Hello, I need help with my photoshop, rececently the majority of my family disappeared merger options and I cant access AVC and other options ive tried reset preferences and it seems to come back but when I add an image and try add text again

  Hello, I need help with my photoshop, the majority of my family rececently disappeared options fusion and I can't access strokes and other options ive tried to reset the settings of preference and he seems to come back but when I add an image and you try to add text again, they'll only options I have are drop shadow , gradient, Chromakey, shine of satin overlay, inner (I use photoshop cc 2015) Please help, my Skype contact options are: RoblivionM8 and email:[email protected]

  Thanks for your time

  Your first screenshot shows the layer style dialog where not all types of effects are indicated on the left. Bottom left of the dialog box, you see a small icon fx with a menu arrow drop-down. Use drop down the menu and make sure all you click on show all effects or restore the default list. I don't know what you're trying the shoe on the second screen capture.

  

• I was told that I have to disable my account from my PC to add to another computer... I've done it before and I lost many of my images that were on LR.  No matter WHAT HELP with this please

  I'm trying to load another computer with CC, I was told that I have to disable my PC mine.  I did once before and lost a lot of my images from LR, suggestions on this please.

  I do the LR back ups system too.

  Thank you very much

  PAM

  Hi goaliemom

  There is no way to disable CC products. When you enable a CC product on another computer, simply connect to Creative Cloud.CC will ask you if you it will activate on more than 2 computers.

  I've done it before and I lost many of my images that were on LR.  No matter WHAT HELP with this please

  On the computer on which you will see that your images are not displayed?

  Catalog check the most recently used file > open recent in Lightroom

  Try opening a recent backup made on your newly added computer

  ~ Assani