Hi guys: help with 2D in 3D images

Similar Questions

• Please help with card mother tx1000 image/information

  I have a tx1000 that just had a failure on the motherboard. A chip failed which apparently provides power to the external ac converter to the rest of the motherboard. Before I go buy a new motherboard (or a new laptop) I'll try to replace the chip that is visibly damaged. I guess that its a sort of thing pretty standard voltage regulator. The only problem is the part number was burned during the failure of the chip. (Of course, this thing is out of warranty or I wouldn't try this). I didn't get help from hp support again.

  Can anyone provide me with the missing numbers from the images below? Or just send me a picture of a high resolution map tx1000 mother? It's the chip in the red zone in the image of the whole of the Council. You can see that it is clearly damaged in close-up. I need an image with as much resolution as the close-up to read the number.

  Thank you!

  

  

  I checked the chip on my mobo and it said: 4413

  BA7YIL

  It may be useful

• Need help with copies of the image

  Hello
  
  I intend to perform online backups in the future. I use 8.1.7.4 on windows 2000 server SP2. My plan of action is:
  
  (1) take image copy of complete database Fridays 'TAG is full_bkp ".
  
  (2) take the copy of incremental backup and apply to this full_bkp.
  
  (3) I must apply this incremental backups on the computer of development on a daily basis.
  
  
  I took the copy of the image of all data files and tried to restore it on another machine. But it showed the error ORA-01152, RMAN-10031, ORA-06512.
  
  Please give me some measures specially related to the copy of RMAN image.
  
  Thank you

  >

  (3) I must apply this incremental backups on the computer of development on a daily basis.

  Hello

  If you want to apply incremental backups of machine production of development on a daily basis cannot open dev in RW mode database unless you use flashback database features.
  If you open this database in RW mode, there is no chance to upadate with incremental backup of the production.

• Help with a stubborn page, image definition

  Ive

  have tried everything I can think of to get a picture on the right side of my page, as I do for my work

  . But everything I do Gets the same result as the image just floats to the left in html and

  covers the text. I just can not understand and was hoping I could get some help here.

  Thanks in advance for anyone who can help me

  Charles Attia

  In the code you posted, you have in the img tab

  align = 'right '.

  The align attribute is deprecated, so get to by.  You also have a coupld of

  same thing, do not use it.

  If you change the attribute align = 'right' to the class = "imageright", which is a class that you already, the floats of the right image.  Don't forget that you have 20px right padding in your .contentleft, which is where the image is located.

  Try this.

  Gary

• Help with transparent buttons on images

  I have photos of a piece of equipment and load images to slides in Captivate 3. Then using the jump to feature to do move from slide to slide, simulating a button is pushed and then what a person would see.
  
  The problem is that if they don't click on the button show advance automatically to the next slide, which is usually not the slide that they should be addressed to. do you know an easy fix for this?
  
  Thank you advance!
  

  Hi again of Serena

  Check if there is perhaps a click box already on the slide that covers the region. This could be the case if you have imported PowerPoint. If so, you need to remove this box click object. Basically, a click outside the click box should be ignored. This is why I think that you have a larger surface area behind the smallest.

  See you soon... Rick

• Hi guys, help with information

  I want to buy the creative cloud (US $9.99 month) but I do not know if this price includes Ligthroom and PhotoshopCC or just one of them. On the other hand, I have the silver efex pro 2 can someone tell me if its works of whit photoshop CC

  Thank you

  Excuse my English is bad

  The Plan of photography includes Photoshop and Lightroom.

  Creative cloud plans

  https://creative.Adobe.com/plans

• Hello, I need help with my photoshop, rececently the majority of my family disappeared merger options and I cant access AVC and other options ive tried reset preferences and it seems to come back but when I add an image and try add text again

  Hello, I need help with my photoshop, the majority of my family rececently disappeared options fusion and I can't access strokes and other options ive tried to reset the settings of preference and he seems to come back but when I add an image and you try to add text again, they'll only options I have are drop shadow , gradient, Chromakey, shine of satin overlay, inner (I use photoshop cc 2015) Please help, my Skype contact options are: RoblivionM8 and email:[email protected]

  Thanks for your time

  Your first screenshot shows the layer style dialog where not all types of effects are indicated on the left. Bottom left of the dialog box, you see a small icon fx with a menu arrow drop-down. Use drop down the menu and make sure all you click on show all effects or restore the default list. I don't know what you're trying the shoe on the second screen capture.

  

• I was told that I have to disable my account from my PC to add to another computer... I've done it before and I lost many of my images that were on LR.  No matter WHAT HELP with this please

  I'm trying to load another computer with CC, I was told that I have to disable my PC mine.  I did once before and lost a lot of my images from LR, suggestions on this please.

  I do the LR back ups system too.

  Thank you very much

  PAM

  Hi goaliemom

  There is no way to disable CC products. When you enable a CC product on another computer, simply connect to Creative Cloud.CC will ask you if you it will activate on more than 2 computers.

  I've done it before and I lost many of my images that were on LR.  No matter WHAT HELP with this please

  On the computer on which you will see that your images are not displayed?

  Catalog check the most recently used file > open recent in Lightroom

  Try opening a recent backup made on your newly added computer

  ~ Assani

• Need help with image fusion

  Hello

  Before I get to my question, I want to give you a glimpse of the project I'm working on and the aspects that I need help. For a school project, a customer, 94Fifty asked us to create an advertisement that depicts their basketball and could be used in advertising online and in magazines. The 94Fifty of basketball is the world's first "smart ball." It can count how many times you dribbling, the arc of your shot, release time it takes for you shoot, etc. To use the ball, you need an Apple product that can download the application 94Fifty on the App Store, so that this project is done as a collaboration with the company 94Fifty and Apple.

  For my ad, to really capture the idea of being the first smart ball, 94Fifty ball I wanted to mix an image of the texture of the ball of 94Fifty, with the shape and details of a brain, with the slogan being, "A ball that is as smart as you." I have my design buried on, but I'm not sure how to combine the image of the brain with ball should I use layers? How can I remove the pink color of the brain and replace it with the ball while keeping the shape of the brain and the lines creased the brain? Any help and technical that you can give would be greatly appreciated.

  Here are two pictures that I'm trying to mix.

  

  I would also try and keep the logo of 94Fifty which is on the ball in the mixed picture.

  Please do not confuse this for to ask me someone to do it for me, it's the exact opposite of what I want, I just need help with what to do.

  Here is a fairly simple method:

  First of all, level of basketball for the type to be horizontal. (Also correct the values of white light - burn at the top left and bottom top right.)

  Mask on white background of the brain and turn the image to 0% of saturation.

  Put the brain on basketball on its own layer. Make the overlay blend mode.

  Using free transform, reshape the brain is greater (rounder), like the basketball, with a visible margin around the edge of the ball.

  -Now, you have a brain in a basketball, but the brain is a bit too subtle.

  Duplicate the layer of brain as many times as you need to get the good contrast (I've duped the layer of brain three times, for a total of four layers of brain).

  You will probably find that you need to use the levels adjustment layers or curves on each layer of the brain, for finer value adjustments. Make sure that each adjustment layer affects only the layer directly below.

  

• Culture in accordance with article grayed out image tool. NEED HELP

  On photoshop cs5, I have problems with the gray tab Image crop tool. Also, the icon is hidden in the tools Panel. Did someone having this same problem in CS5?

  For harvest of command in the menu of the image to work, you either have a selection active or

  a bring out the crop with the crop tool, but did not harvest.

  The crop in the toolbox tool is different from the command crop in the image menu.

  You can either use the crop tool in the Toolbox to crop an image or make a selection

  with the Rectangle tool and then use the command crop in the image menu.

  more information:

  http://help.Adobe.com/en_US/Photoshop/CS/using/WSfd1234e1c4b69f30ea53e41001031ab64-7636a.h tml

  MTSTUNER

• If anyone can help with how to get the image

  a database in a view using Dreamweaver page?

  I have a page with a recordset and a database with text and images. The image field has a link to the file and the image as in /images/image1.jpg including the size.

  The thumbnail I want to display on a page of the main display is in the database using varchar with a link like /images/image1.jpg

  When someone wants to see the master page, they click on a link and everything which has been entered showing the database. At least everything except the image.  Right now it shows just /images/image1.jpg

  I don't know how to call the images to the database.

  Thanks for the help and information.

  conch,

  Check the entry of the database, and you may also have too many tags...

  In addition, check to see if your pictures folder is in the root directory, such as an incorrect path can complicate things.

  If this site is located on a remote server, feel free to send me the link here or by e-mail: [email protected]

  In addition, if you have a screenshot, it would be useful.

  Hang on!

  See you soon,.

  wordman

• Help with importing images .raw and b + w filters

  I recently picked up a large number of b + w images.  With most of these images, I apply a red in the filter of the camera.  When I then import photos in lightroom 2.3 that a color version of my image is then made, without the red in camera of the filter I took photos with.  No one knows so as to restrict the lightroom changing .raw their version color images and show them that they have been taken.  If it's important I shoot with a Canon 1000 d.   Help, please!   Thank you.

  Lightroom does not take into account metadata settings that are what is applied when you are working with RAW and use the Canon picture Style settings.

  Those who apply to the format JPG, but not VINTAGE.  It's actually a feature, not a bug, because it is considered to give you more control by using the settings in Lightroom for Monochrome and apply red shades - more you could have always still the flexibility of manufacturing was if color printing you want, that you would lose if RAW applied the picture Style settings.  If it you shoot in RAW + Jpeg (or Jpeg only), bugs and provide JPEG images in LR, but I recommend to stick to RAW and applying the changes in Lightroom instead.

• Need help with moving around images

  I need help with moving images and images around the dreamweaver document window. My brother gave me his computer witch a dreamweaver MX (it is in Irag) so I can start building my own construction sites. I went to borders and bought a book on dreamweaver MX. Here's where I'm having a problem with: when ever I bring an image in the document window, I can't move the image around the document window. The book says "place the insertion point where you want the image to appear" but there is no insertion point. There is just a straight line as if I am trying to type something. It's almost as if I'm in microsoft word. If I take the mouse on the image, and then left click and try to drag the image to the location I want, it does not move. Can someone please help me with this problem. Thanks Jical

  Thank you for the answer to my question. This was really helpful.
  Jical

• help with animation

  I saw many websites with this kind of animations http://canal52.com/site/ < < < please click the link to see the animation, you can guys help me by telling me how do you this kind of animation just the yellow line that appearss in this website am new to flash and I've been trying to understand this point by myself , but I cant just so you can show me I will appriciete it.
  
  Is BTW there a way to get the file flash site to see the animation process? If Yes can you me how thanks

  That could be accomplished in different ways. The simplest (and I think that's how they did it) was to make a static image of this yellow swirly thing and then use a mask to make it appear as if it trickled in. More technical methods would create animated graphics with programs such as adobe after effect, first pro, etc., but I still think that they have used a static image of the PNG and hidden in. I will create a version sloppy about what they probably did, and you're on your own from there.

  http://www.Shan-dysigns.com/flashexamples/masking.fla

  As I said, this example is sloppy, but it shows you what I was talking about.

• I have a HUD following my cursor with info on the image. How can I get rid of him?

  One of my Mac Pro, there's a HUD display with information about the image. It sticks to my cursor, and making it difficult to work. I'm sure there must be a command to stop this, but I'm not. I have another Mac Pro at work, and he does not. Any help would be appreciated.

  It's probably the Tooltip Metadata.

  You switch on and off with the key combination command-T or the browser and menu overlay metadata visualization: