Help with my photo files

Similar Questions

• Need help with a DMP file. Windows XP

  Hello guys!

  Need your help impeccable with a dmp file? What is the problem causing blue screen?
   http://data.fuskbugg.se/skalman02/4e04ed908a06f_Mini122210-01.dmp (latest version)
   http://data.fuskbugg.se/skalman02/4e04edab036c8_Mini113010-01.dmp
   http://data.fuskbugg.se/skalman02/4e04edbce5212_Mini112710-01.dmp
  Thank you for the kind help!

  Hello Molphyr,

  The first discharge seems to have been caused by viahduaa.sys and it should be updated.  My comments on the discharge are in bold:

  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  100000 1 error checking, {a824a000, 2, 0, acc5e0d8}

  Probably caused by: viahduaa.sys (viahduaa + 280d 8)<-- debugger="" suspects="" this="">

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: a824a000, memory referenced
  Arg2: 00000002, IRQL
  Arg3: 00000000, value 0 = read operation, 1 = write operation
  Arg4: acc5e0d8, address memory

  Debugging information:
  ------------------

  READ_ADDRESS: a824a000

  CURRENT_IRQL: 2

  FAULTING_IP:
  viahduaa + 280d 8
  acc5e0d8 3b0f cmp ecx, dword ptr [edi]

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: DRIVER_FAULT

  BUGCHECK_STR: 0XD1

  LAST_CONTROL_TRANSFER: from acc6134c to acc5e0d8

  STACK_TEXT:
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  acc6134c 80551384 a8249fe0 00000020 a8249fe0 viahduaa + 0x280d8<---driver is="" at="" top="" of="">
  805513a 8 acd8d676 847bcd58 a8249fe0 a9abcc80 viahduaa + 0x2b34c
  805513d 0 80551401 00000020 80551400 portcls acd8d945! CPortPinWaveCyclic::Copy + 0 x 56
  80551410 acd877bf 00024fa0 8055c0c0 ffdff000 portcls! CPortPinWaveCyclic::RequestService + 0 x 298
  80551428 80545ebf 847 4238 4228 portcls 00000000 847c c! CServiceGroup::ServiceDpc + 0x2a
  8055be60 80551440 ffdffc50 00000000 8055be60 nt! KiRetireDpcList + 0x61
  80545da4 80551450 0000000e 00000000 00000000 nt! KiIdleThread0
  80551454 00000000 0000000e 00000000 00000000 nt! KiIdleLoop + 0 x 28

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  viahduaa + 280d 8
  acc5e0d8 3b0f cmp ecx, dword ptr [edi]

  SYMBOL_STACK_INDEX: 0

  SYMBOL_NAME: viahduaa + 280d 8

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: viahduaa

  Nom_image: viahduaa.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4a24e854

  FAILURE_BUCKET_ID: 0xD1_viahduaa + 280d 8

  BUCKET_ID: 0xD1_viahduaa + 280d 8

  Follow-up: MachineOwner
  ---------

  0: kd > lmvm viahduaa
  start end module name
  acc36000 acd85900 viahduaa T (no symbol)
  Loaded symbol image file: viahduaa.sys
  Image path: viahduaa.sys
  Image name: viahduaa.sys
  Timestamp: Kills Jun 02 03:52:36 2009 (4A24E854)<--- driver="" from="" 2009-="" should="" be="">
  CheckSum: 00156D7B
  ImageSize: 0014F900
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• Help with loading photo

  Im trying to download pictures from my camera and it will not let me open the file. Whenever I have try opening the pictures he sends me to Internet Explorer, saying that its to protect my safety. How can I fix to be able to look at my pictures?

  Hi ShelbySchutte,

  · You download the pictures online, or it is on the computer?

  · What is the full error message that you receive with the error code?

  · Do you remember all the recent changes on the computer before the show?

  · What is the file format of the images you are trying to download?

  For reference: download and work with digital photos: http://www.microsoft.com/windowsxp/using/digitalphotography/learnmore/top10.mspx

  Downloading pictures from your digital camera: http://www.microsoft.com/windowsxp/using/digitalphotography/takeit/transfer.mspx

  To transfer images from digital camera to computer: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_irdaconcepts_206.mspx?mfr=true

• Help with unexpected photo color changes when loading

  Hello

  I have learned things for a few years and doing pretty good to the mounting

  photos like portraits.

  Recently edited portrait high key, when I compared the RAW CR2 file in flt along the side of the photos

  converted to psd Adobe, colors where change after the opening and saving to the psd format.

  The thing is that I did no changes.  I just open the raw file, then click Open edit thought go in ele.

  Once it opens as a psd, the colors have changed.

  Camera is set to Adobe RGB.  ELE set to manage colors for printing.

  Is this normal, or something I'm doing or not doing.

  Suggestions and recommendations requested.

  Txz.

  Will be

  I understand that you compare side by side on-screen:

  -l'image in the ACR dialog, without any changes

  -l' new image observed after opening in the editor and saved as psd and reopened in order to be able to compare side by side.

  I agree that you should not see any significant color change.

  Notes about your settings:

  -Camera set to Adobe RGB: good for parameter ignored with raw files, JPEG files (PSE, the choice between sRGB or aRGB ACR depends on the second parameter in the Editor: always optimize for printing). Are not relevant to your problem.

  -Always optimize for printing: refers to the raw data will be converted to aRGB for printing and shown according to your screen. This is the right setting, if you want to print in ARGB.

  So, there's nothing wrong with your settings.

  Y at - it a bad screen color profile saved on your computer? Which could happen with other software or screen attempt calibration tools...

  I can't help much in this situation, but it might be useful you have described the color differences s two views. For better visibility compare colors, beware of the surrounding parts of images: If you're on a light background (ACR) and the other in a dark (editor), you see exactly the same colors.

• Need help with uploading photos to the new macbook

  I just bought a macbook pro 13 inch and had all my old files saved on a WD My Passport for Mac external hard drive. When try to import my library of photos from the external hard drive to the macbook, I receive a message reading "none of these files can be imported into your photo library.

  I read that you are unable to import the whole photo library to another library of photos, but I don't know if I understand that correctly. in any case, can someone please walk me through how to fix this problem, because a lot of these photos are very important to me. In case this is useful, I was able to import more pictures of the new photo library (such as those that have been saved on the desktop, iCloud etc.)

  Sorry, but unless you detail we can without help

  What format is the WD MyPassport? What you have on it (your library of Photos or just Photos)?

  You import photos - you open and migrate the library

  What version of the OS and the Photos or iPhoto do you have on your old system?

  LN

• help on the photo files please

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: i have connected my drive hard dvr to my computer to read the miv files but I can not open files

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        What happens when you try to open the files? You get the error message on the system?

  ·        What program do you use to open the files on the system? Do you have any third-party program installed on the system?

  ·        Were you able to open these files before on the system?

  Give details, so that we can help you in a better way.

  File MIV is a seller of MapImagery profile. MapImagery is a free plugin for users of MapInfo providing tools that makes it easier to use imagery in MapInfo Professional.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help with the batch file command - move all files/folders

  I need help creating a simple batch file that performs the following operations:

  Move all files AND folders in a source folder to a target folder. The source folder will be mklinked with the target folder and an infinite loop can be possible, not sure if any order would be necessary here to avoid this? Executed once A thing, or a thing to stop?

  It comes to free up space on an SSD by iTunes forced location for backups and apps to be physically on another HARD drive, but available as if it were in default location.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• need help with reading ZIP files.

  Dear windows team

  I am self-taught on the computer and I am a 55yo.

  I have Aproblem... .i don't know how to read ZIP files... .everytime I try to get to the one just saying my computer doed not support... I tried to download a free access, but then nothing happens...: (.. .the it in is the same with RAR files when I want to watch some movies.. .please could you help me should I download for free on internet... .i understand if you can't help to be honest I'm computer illiterate)

  Kind regards...

  Mario

  Hello

  In the case of zip files, you can right and select extract files to get all the files extracted using File Explorer. For RAR files, you can try 7 - zip:

  http://www.7-zip.org/download.html

  Hope that answers your query :)

• help with the dump file

  Hello world. IM new here and recently my computer gives me a few problems and restarts itself. Here's the crash dump files. can someone help me a this?

  https://SkyDrive.live.com/redir?RESID=A3CBE9613CDF601E%21474

  Hello

  We have two discharges with the same bug control - BAD_POOL_CALLER (c2)

  This indicates that the current thread is doing a bad pool request.

  If we take a look at the call stack:

  STACK_TEXT:
  fffff880 '0bcf4078 fffff801' 060e3a6e: 00000000'000000 c 2 00000000'00000007 00000000'000011 c 1 00000000'0503028 d: nt! KeBugCheckEx
  fffff880 '0bcf4080 fffff880' 044b63ea: fffff8a0 '14ca68e0 00000000' 40001880 fffffa80 '09e23370 fffffa80' 494e494d: nt! ExFreePool + 0 x 984
  "fffff880 '0bcf4160 fffff8a0' 14ca68e0: 00000000 ' fffffa80 40001880 '09e23370 fffffa80' 494e494d fffff880 ' 0bcf49cc: atikmdag+ 0xb63ea
  fffff880 '0bcf4168 00000000' 40001880: fffffa80 ' 09e23370 fffffa80 '494e494d fffff880' 0bcf49cc fffffa80 ' 0b54b680: 0xfffff8a0'14ca68e0
  fffff880 '0bcf4170 fffffa80' 09e23370: fffffa80'494e494d fffff880 '0bcf49cc fffffa80' 0b54b680 00000000' 4b550d70: 0 x 40001880
  fffff880 '0bcf4178 fffffa80' 494e494d: fffff880'0bcf49cc fffffa80 '0b54b680 00000000' 4b550d70 fffff880' 0449c5c3: 0xfffffa80'09e23370
  fffff880 '0bcf4180 fffff880' 0bcf49cc: fffffa80 '0b54b680 00000000' 4b550d70 fffff880' 0449c5c3 00000000'40001880: 0xfffffa80'494e494d
  fffff880 '0bcf4188 fffffa80' 0b54b680: 00000000' 4b550d70 fffff880'0449c5c3 00000000'40001880 00000000' c0000000: 0xfffff880'0bcf49cc
  fffff880 '0bcf4190 00000000' 4b550d70: fffff880 '0449c5c3 00000000'40001880 00000000' c0000000 fffff880' 0bcf4330: 0xfffffa80'0b54b680
  fffff880 '0bcf4198 fffff880' 0449c5c3: 00000000'40001880 00000000' c0000000 fffff880 '0bcf4330 00000000' 00004000: 0x4b550d70
  fffff880 '0bcf41a0 00000000' 40001880: 00000000' c0000000 fffff880 '0bcf4330 00000000'00004000 fffff880' 0bcf49cc: atikmdag+ 0x9c5c3
  fffff880 '0bcf41a8 00000000' c0000000: fffff880 '0bcf4330 00000000' 00004000 fffff880 '0bcf49cc fffff880' 0bcf49d0: 0 x 40001880
  "fffff880 '0bcf41b0 fffff880' 0bcf4330: 00000000 ' 00004000 fffff880 '0bcf49cc fffff880' 0bcf49d0 fffff880 ' 0bcf49d4: 0xc0000000
  fffff880 '0bcf41b8 00000000' 00004000: fffff880'0bcf49cc fffff880 '0bcf49d0 fffff880' fffff8a0 00000000' 0bcf49d4: 0xfffff880'0bcf4330
  "fffff880 '0bcf41c0 fffff880' 0bcf49cc: fffff880 '0bcf49d0 fffff880' 0bcf49d4 fffff8a0 ' 00000000 fffffa80 ' 0b54b680: 0x4000
  "fffff880 '0bcf41c8 fffff880' 0bcf49d0: fffff880 ' 0bcf49d4 fffff8a0 ' 00000000 fffffa80 ' 0b54b680 fffff880 ' 0bcf4210: 0xfffff880'0bcf49cc
  "fffff880 '0bcf41d0 fffff880' 0bcf49d4: fffff8a0 ' fffffa80 00000000 '0b54b680 fffff880' 0bcf4210 fffff880 ' 0bcf43e0: 0xfffff880'0bcf49d0
  fffff880 '0bcf41d8 00000000 fffff8a0': fffffa80'0b54b680 fffff880 '0bcf4210 fffff880' 0bcf43e0 00000000' 00000000: 0xfffff880'0bcf49d4
  "fffff880 '0bcf41e0 fffffa80' 0b54b680: fffff880 '0bcf4210 fffff880' 0bcf43e0 00000000'00000000 00000000'00000000: 0xfffff8a0 00000000"
  fffff880 '0bcf41e8 fffff880' 0bcf4210: fffff880 '0bcf43e0 00000000'00000000 00000000'00000000 fffff880' 0bcf4588: 0xfffffa80'0b54b680
  fffff880 '0bcf41f0 fffff880' 0bcf43e0: 00000000'00000000 00000000'00000000 fffff880 '0bcf4588 fffff880' 0bcf48bc: 0xfffff880'0bcf4210
  fffff880 '0bcf41f8 00000000' 00000000: 00000000 00000000' fffff880 '0bcf4588 fffff880' 0bcf48bc fffffa80'06914028: 0xfffff880'0bcf43e0

  Failed to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for atikmdag.sys
  ERROR: Module load completed but symbols can be loaded for atikmdag.sys
  GetPointerFromAddress: unable to read from fffff801061c9168
  Unable to get nt! MmPoolCodeStart
  Unable to get nt! MmPoolCodeEnd
  Probably caused by: atikmdag.sys ( atikmdag + b63ea )<--- match="" from="" the="" call="">

  ^^ AMD/ATI video driver.

  Make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  -----------------------------------------------------------------

  If you're still crashing after the above, remove and replace BitDefender with built-in Windows Defender from Windows 8 for troubleshooting purposes:

  BitDefender removal - http://www.bitdefender.com/support/how-to-uninstall-bitdefender-333.html

  Kind regards

  Patrick

• Need help with formatting of file

  I created an InDesign file that has a combination of images and text. The text has been pasted from another document, so I used the function of automatic debit. I added photos in mine. Now I need to edit pages in my document, but every time I do the format of pages later gets disturbed (ie. the text moves, but the photos are not). Is there a way to change this for the layout of each page is unchanged, leaving the appropriate text «locked "to the appropriate images?» I use creative Cloud version of Id.

  https://InDesignSecrets.com/make-an-image-flow-with-the-text.php

• Need help with opening a file

  WHEN I go to open a file Acrobat it opens and States of file must be decoded.  What is c?

  Hi etceteraetceteraetcetera,

  You can use Microsoft office program (Word, Excel) to open the PDF file. Please try to open the program with Adobe Reader. You can download Adobe Reader by clicking the link below.

  http://get.Adobe.com/reader/

  If the reader is already installed on your computer, please follow the below mentioned steps

  1. Right-click on the file you want to open
  2. Click 'open with '.
  3. Click "Choose default program"
  4. Choose Adobe Reader in the list of programs
  5. Don't forget to check the box that says "always use the selected program to open this type of file

  Let me know if this helps.

  Kind regards

  ~ Dominique

• Help with panaramic photos in Photoshop CS6

  I have Photoshop CS6 and I can't create panaramic photo class. I tried to merge layers automatic and that has not worked. I have tried to merge to HDR Pro and who did not. I also open these files in Lightroom and then right-click to merge in Photoshop and I get an error message that says "Photomerge.jsx file not found. Help, please.

  Looks like something prevents access of script / execution. Check your virus scanner and turn off the power.

  Mylenium

• Help with AS2 - Photo Gallery

  Hi all

  someone beable to help me with a code, I downloaded an example of photo gallery, for the moment, the film plays the pictures when you click on a button (timer)

  What I try to do is to get the film auto play on load rather than having to click on the photos. I've been lookin in the manuscript, I think its something to do with

  initialize values

  currentIndex = 0;

  but when I change the value to 1, not much is happening, some would be able to take a look at the code and see where I can change it for that video turns the images automatically when loading.

  I pasted the code below, hope it's ok?

  Thanks a lot for the help of anyones!

  CODE:

  Copyright (c) by Andrew hero. All rights reserved. DO NOT REMOVE.
  fscommand ("allowscale", "false");
  Stage.scaleMode = "noScale";

  targetPhoto._visible = false;

  slides_xml = new XML();
  slides_xml. OnLoad = loadSlideShow;
  slides_xml. Load ("album.xml");
  slides_xml.ignoreWhite = true;

  function loadSlideShow (success) {}
  If (success == true) {}
  rootNode = slides_xml.firstChild;
  totalSlides = rootNode.childNodes.length;
  currentSlideNode = rootNode.firstChild;
  photos = new Array (totalSlides);
  thumb = new Array (totalSlides);
  Legends = new Array (totalSlides);
  TX = 0;
  for (i = 0; I < totalSlides; i ++) {/ / fill the tables and dynamically create thumbnails}
  photos [i] = currentSlideNode.attributes.jpegURL;
  inches [i] = [currentSlideNode.attributes.jpegWidth, currentSlideNode.attributes.jpegHeight];
  captions [i] = currentSlideNode.firstChild.nodeValue;
  _root.attachMovie ("Thumb", "Thumb" + i, i);
  _root ["inch" + i] ._x = tx;
  _root ["inch" + i] ._y = 595; using fixed Y coord
  _root ["inch" + i] .tindex = i;
  TX = 22;
  currentSlideNode = currentSlideNode.nextSibling;
  }
  initialize values < < < < < < < < < < < < < < < < < < < < < < < IS IT HERE?
  currentIndex = 0;
  targetWidth = inches [currentIndex] [0]; get a sample
  targetHeight = inches [currentIndex] [1]; get the height;
  updateSlide();
  }
  }

  function updateSlide() {/ / upload pictures, update the caption and status fields}
  targetPhoto.loadPhoto (photos [currentIndex]);
  Caption = captions [currentIndex];
  statusField = (currentIndex + 1) + "/" + totalSlides;
  }

  function slideShow() {}
  If (currentIndex == totalSlides-1) {currentIndex = 0 ;} else {currentIndex ++ ;}}}
  targetPhoto._visible = false;
  targetWidth = inches [currentIndex] [0]; get a sample
  targetHeight = inches [currentIndex] [1]; get the height;
  updateSlide();
  }

  MovieClip.prototype.loadPhoto = function (fn) {/ / load method jpeg external + preloader}
  this.createEmptyMovieClip ("holder", 1);
  this.holder.loadMovie (fn);
  this.onEnterFrame = function() {/ / NOTE: could use it to display the percentage of users}
  If (Math.floor((this.holder.getBytesLoaded()/this.holder.getBytesTotal())*100) > = 100) {}
  delete this.onEnterFrame;
  }
  }
  }

  No, because my answer explained your time-out function must call the slideshow function

• Need help with my Flash file

  My continuous flash file in a loop at the end of my stop ignoring and defer orders.

  It works perfectly until the last frame/command. I want it loop to the first image, and for this, but then the movie will not properly there after. Is there anyone who can help me with this file, please?

  Thanks for your time.

  Here's what the file looks like

  http://safarianimals.freeiz.com/2010_FHNRZ_Header.html

  Here is the swf file

  http://safarianimals.freeiz.com/2010_FHNRZ_Header.swf

  Here you can download the original FLA file

  http://CID-04caffbb2769932f.SkyDrive.live.com/self.aspx/Flash%20HELP/2010 ^ _FHNRZ ^ _Header.f the

  Thanks for the help

  Here ya go Linda.  This has proved to be a little more work than I anticipated, but not too bad.  This is because I thought I was just able to enter and change what you had, but I didn't understand how you did, or really know anything on the as2, so I just redid it.  Images are resized and I think it does what you want.  Take a peek.  Everything is controlled by AS3, there is nothing on the stage of the timeline.

  I did a lot of comments, but let me know if you need any help to understand the logic and flow to tweak it for your own use.

  Here is the HTML link:

  http://www.GTCC.edu/distance/learning_objects/Flash/test/Linda/2010_FHNRZ_HeaderCS3_IQ.htm l

  The SWF file:

  http://www.GTCC.edu/distance/learning_objects/Flash/test/Linda/2010_FHNRZ_HeaderCS3_IQ.swf

  The CS3 fla file:

  http://www.GTCC.edu/distance/learning_objects/Flash/test/Linda/2010_FHNRZ_HeaderCS3_IQ.fla

• simple code help with streaming 1 file

  I created the Flash Media Server 2.0 on Windows (test box) under the dl35.tamu.edu of the host (behind a firewall, so I don't mind giving it)
  Under the application directory, I create a directory named test
  In this directory I place a flash called motion.flv film
  In this same directory, I copy the main.asc that comes with Flash 8 software
  I load the application of 'test' and use _definst_ as instance name
  
  In Flash Professional 8, I create a new fla called test.fla
  I incorporate a movie and use the ClearOverAll.swf as the skin for the film.
  On the settings tab I have change the path of advanced content to rtmp:"//dl35.tamu.edu/test/_definst_/motion.flv
  I have test produces the HTML and indeed the server indicates a connection even if nothing is playing.
  
  This is probably where I'm more confused, but I could have done something wrong with the above as well. I'm not a Flash programmer, I'm a network guy. All I want to do is the bare minimum in the simplest form of streaming. I couldn't find examples of code that worked including the tutorial on the Adobe site (which seems to be fairly widespread). Search in other examples I "think" I found what I wanted, but apparently I don't implemented it correctly or not what I need after all and I would like someone to check. Here it is the action script that I found that I placed in the test.fla. Is it bad to do?
  
  NC = new NetConnection();
  NC. Connect ("rtmp://dl35.tamu.edu/test/_definst _");
  
  NS = new NetStream (nc);
  my_video.attachVideo (NS);
  ns.setBufferTime (0);
  NS. Play ("test");
  
  Is the above correct? Given names, again, what needs to be changed. Also should this same go here? Is it supposed to be in a file by itself action script? In any case when this product in html format, there are several errors:
  
  * Error * scene = scene 1, layer = Layer 1, frame = 1:Line 16: statement must appear in the onClipEvent/Manager
  NC = new NetConnection();
  
  * Error * scene = scene 1, layer = Layer 1, frame = 1:Line 17: statement must appear in the onClipEvent/Manager
  NC. Connect ("rtmp://dl35.tamu.edu/test/_definst _");
  
  * Error * scene = scene 1, layer = Layer 1, frame = 1:Line 19: statement must appear in the onClipEvent/Manager
  NS = new NetStream (nc);
  
  * Error * scene = scene 1, layer = Layer 1, frame = 1:Line 20: statement must appear in the onClipEvent/Manager
  my_video.attachVideo (NS);
  
  * Error * scene = scene 1, layer = Layer 1, frame = 1:Line 21: statement must appear in the onClipEvent/Manager
  ns.setBufferTime (0);
  
  * Error * scene = scene 1, layer = Layer 1, frame = 1:Line 22: statement must appear in the onClipEvent/Manager
  NS. Play ("test");
  
  Total ActionScript errors: 6 reported errors: 6
  
  Goal: All I want to do is stream 1 file... only 1. I have no way of knowing if this server works before taking this simple step. It would be nice is Adobe delivered out of the box streaming samples like all other servers continuously, we support do. But I digress. Any help is appreciated beyond all means I can transmit properly including a working example of code package that I can change just a few lines then I can understand what is happening.

  Imstamu, I'm relatively new to myself, but I noticed a few things in your message that I wanted to comment. First, you come up with the error messages can be the result of putting the actionscript code in the video object itself, rather than in the scenario for the main SWF movie. What I think that you can do is put the actionscript code in a layer called 'Actions' in the main timeline, select the keyframe for that layer 1 frame and put the ActionScript in this key frame. If you put in the video object (or another object such as a button, etc.), you can get errors of the type you declare (at least it happened to me). However, as shown below, you may not need as actionscript at all.

  Second, you can try placing a directory under the 'test' directory called 'streams', another directory called "_definst_" under the "streams" directory and put the FLV file in the _definst_ directory. This is where FMS is looking for the files to stream, if I understand correctly. (It appears from your description that you have placed the FLV file directly below 'test'). To test level * is * the right place for main.asc, like you did. IMPORTANT: Regarding the path that you use in the variable contentPath in the video player object, the path for the directory in fact holding the FLV file must * always * be rtmp://dl35.tamu.edu/test/_definst_/motion.flv, as you have done - that is to say, "broadcasts" should not be included in the contentPath variable. Don't ask me why, but it worked for me. The reason why the server is showing a connection is that you put a directory 'test' in the right place and so entered the application from the point of view of the FMS, but you don't have the FLV file in the right place, and SGF therefore cannot find the FLV file in the path that you specified.

  Third, using the FLVPlayback component in the swf file? (By the way that you use one of the Flash skins canned, looks like it is the case.) If so, and if you are just streaming a movie, you don't need to worry about the code to open a new NET connection, new netstream, etc - all this is integrated in the FLVPlayback object. So all you have to do is put in the RTMP path to the file - rtmp://dl35.tamu.edu/test/_definst_/motion.flv--dans the contentPath for the FLVPlayback object variable. you need not code opening the NetConnection and NetStream objects.

  I hope it's useful. As mentioned, I'm pretty new myself, but I was able to stream files successfully using FMS, FLV and Flash.