Help with setting on my router.
I went online to check my settings and when I went to status and then wireless, I noticed it says disable the encryption function. First of all what is encryption and
How can I change this to?
Encryption is a feature of wireless security to prevent others from monopolizing your network by asking a key or a passphrase. Here is the procedure.
By default, the user name must be 'empty' and password must be admin.
Tags: Linksys Routers
Similar Questions
-
Need help with setting up in checkbox in interactive reports
I need help with setting up in checkbox in interactive reports, I use this statement a query
SELECT apex_item.checkbox
(
1, ROLEID,
'onchange = "spCheckChange (this);". ',
: F_ROLEID_LIST,.
':'
), del.
ROLEID, ROLEDESCRIPTION
OF EBA_ROLES
When I run it I get the following
< input type = "checkbox" name = "f01" value = "1" onchange = "spCheckChange (this); ' / > instead of the checkbox
Do I need to configure anything else
Aditya Gupta wrote:
I need help with setting up in checkbox in interactive reports, I use this statement a query
SELECT apex_item.checkbox
(
1, ROLEID,
'onchange = "spCheckChange (this);". ',
: F_ROLEID_LIST,.
':'
), del.
ROLEID, ROLEDESCRIPTION
OF EBA_ROLES
When I run it I get the following
instead of the checkbox
Do I need to configure anything else
This is one of the most frequently asked questions in this forum. Set the column attribute the text to display as Standard report column and not display text (special escape characters).
Always include the information referred to in these guidelines when you ask a question and if you use APEX 5.0, State, if you develop using the pages or the view of the component designer.
-
Need help with set up on PC6624 InterVLAN routing
Hello
I stack 5-switch 5548 Dell PC / 1 PC 6624 switch for layer 3 routing.
I connected battery to PC6624 with 10 GB fiber cable.
I created several VLANs on the layer 2 stack. Now how to set up communication Inter VLAN switch PC 6624?
Concerning
Marion
Hello
Page 507 of the manual explains how to enable IP routing on the switch ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/powerconnect-6248_User%27s%20Guide2_en-us.pdf
Here is a document explaining the Setup on an older switch, the concepts are the same http://www.dell.com/downloads/global/products/pwcnt/en/app_note_38.pdf
-
Help with logs on Cisco router
First of all: if I'm in the wrong place, please let me know.
Question: I'm digging orders Cisco, but the help of Cisco, Googe, Yahoo Sites and other types of resources can not give me the answer I wanted.
Router: Cisco 7206VXR (NPE - G1) processor (revision C) with 983040K / 65536K bytes of memory.
My question is simple and pleasant: I need to learn from the history of the Interface of one of our routers and not being is not in the domain of Cisco for a few years I can't find command. If I can find a command that draws a complete history that would be great.
The commands I used:
history
history of show
car1. Ash #sh interfaces se1/0/23:0 history
^
Invalid entry % detected at ' ^' marker.car1. Ash #show interface se1/0/23:0 60 minutes story
^
Invalid entry % detected at ' ^' marker.I need to find the command that gives newspapers the following type:
00:00:46: % LINK-3-UPDOWN: Interface Port-Channel, 1 changed State to
00:00:47: % LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed State to
00:00:47: % LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed State to
00:00:48: % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, state change downstairs
00:00:48: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed
State down 2 * 1 Mar 18:46:11: % SYS-5-CONFIG_I: configured from console by vty2
(10.34.195.36)
18:47:02: % SYS-5-CONFIG_I: configured from console vty2 (10.34.195.36)
* 18:48:50.483 Mar 1 UTC: % SYS-5-CONFIG_I: configured from console vty2 (10.34.195.36)What you are looking for is not available using interface show orders but would be available using the show log command. You want something that could look like this
view Journal | include 1/0/23:0
Note that this is the search through the buffer of logging on the router. The amount of memory allocated to the record buffer and the volume of messages generated will determine how far back you can go. If the router sends syslog messages to a syslog server (or another feature of management that archive messages) then you can search the logs it and to go further back. Also note that the logging buffer is cleared when the router reloads.
HTH
Rick
-
Help with setting/get variables in app
Hello
I have an application that behaves as follows:
1. the user connects.
2. the user is presented with a list of projects; user clicks a project to drill down for this project.
3. the user is presented with project information that includes 4 separate lists tasks grouped by week. So there are tasks for the current week in what is more task for 3 weeks on.
4. the user can change the talks or create new ones for each of the 4 weekly groups.
Given that, on the home page for a project I have set up a report and the form for each weekly group. I also have an element for the project as well as each weekly group id id. Here, the goal is that when a user clicks on the 'create' button, they can create a new task for a group of the weekly. However, this does not work.
For the first group of weekly when I click on 'create' I am presented with the form to fill out for the task. All the information is there, including the correct id for this weekly group so that the task is assigned to this property. However, when I save I get an error that says that this identifying particular is set to null.
For the next three groups when I click on 'create' I give myself the same thing as above, but without the weekly group id. Even if I put it and record things, I get the same error.
So, I wonder what I did wrong in the flow of the app. I put these variables too early, too late? Am I really not pick up their despite what I see on my screen? I missed some foundations of the Apex here?
Thanks in advance for your time and help.
JonIt should be
: ASK = "CREATE";
'CREATE' is the name of the create"" button.
CITY
-
Need help with RangePlus WRT110 wireless router
Whenever someone on my laptop when my computer is turned on, I get an interference of connection for about 1 minute, then everything returns to normal. How can I fix?
I think maybe it's because your two computers are the same IP address of your router, it's why you get disconnected when your other computer is turned on. So I think you can set a static IP address to your desktop in order to solve this problem. Follow the instructions how to give static IP for your XP computer.
Click the Start button > settings > Panel > Network Connections - right click on the icon for the local area network connection and go to properties - in the "Général" tab select "TCP/IP Internet Protocol" and click on the properties button - select "use IP address following" - provide the IP - 192.168.1.5 - subnet mask 255.255.255.0 default gateway - 192.168.1.1 - favorite DNS 192.168.1.1 DNS - auxiliary 4.2.2.2 > click the Ok button to save and click 'Close' on the main properties window.
After that try to go online from your desktop computer, once you're around online on your other computer and check whether you are experiencing the same problem.
-
Hard drive controller is released on the PC need help with setting up new controller
I have a HP with a built NVidia controller on the mobo. The controller was an error and I am installing an Adaptec 2120SA on the system controller. The computer sees the controller and it tries to start the operating system but has problems it BlueScreens and it blue screens quickly so I do not see the error code. but I think it's because I don't have the drivers of the controller installed in the operating system. I really don't want to reload the workstation. Is it possible to install the drivers of the controller without starting the operating system I tried three other PC and they all have the same questions. as the driver for the controller is not there. The OS is Vista Home Premium 64-bit. The PC is no longer under warranty and a replacement MoBo is too much money.
Thanks in advance for your help.
Hi arjaywolverine,
There is a way that can be attempted to identify the problem and we'll see if it helps.
You need to extract the driver file from hard drive controller on a floppy/flash your motherboard CD drive, and then you restart the computer with the Windows Vista operating system DVD.1. turn on your computer and insert the CD or the DVD of Windows Vista.
2. on the page install Windows, do not click on install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
3. click load drivers and it prompts you to insert your floppy disk or USB key.
4. navigate to the correct device and click Ok.Once the drivers are installed correctly, remove the DVD and diskette. Restart the computer and who should do it.
Hope this information is useful.
Karena R - Microsoft Support
--------------------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
Need help with setting wrong and impossible to find ways to fix
Hello
I just installed LM and imported photo. However, I might accidentally click on a few buttons and all the picture in the section developing shown like this. They appear with weird colors (color incorrect). I guess that it maybe because of some settings, but I can't understand that one. Please see the example in this picture (has not edited anything yet). Could you suggest how to correct the adjustment? Thank you very much for your help.
Go to Preferences, click the performance tab, and then uncheck the box.
-
I need to add 5 Custom field in CSV file. At the moment I am able to add one field at a time using the script below. It's a problem because it takes all day to update the records of 600 mV.
foreach ($f in (import-csv v:\customfield.csv)){get-vm $f.Name |)) {Game-CustomField-name "Project Code" - Code value $f.Project}
v:\customfield.csv
Name
Project code
Up to the
Cost (per year)
Cost (advance)
Dv01
555
Perm
$5.00
$1.00
Can someone help me change this sur-liner to make all the values at once?
At the bottom, is it possible to change the "project code" in the script above to a variable say $d run this one-liner once and have any custom field created and filled at once
foreach ($f in (import-csv v:\customfield.csv)){get-vm $f.Name |)) {Game-CustomField-name $d - value $ f. $d}
OK, think I misunderstood you slightly.
$fields = "Project Code", "Until", "Cost (Yearly)", "Cost (Upfront)" $vms = Get-VM foreach ($f in (import-csv v:\customfield.csv)) { $vm = $vms | Where { $_.Name -eq $f.Name } foreach ($cf in $fields) { $vm | Set-CustomField -name $cf -value $f.$cf } }I don't think it's possible to do so without an inner loop. It will get even all values y in one shot.
-
Need help with Set-VMHostAdvancedConfiguration
Hello
Following commands do not work for some reason any.
Please see the errors of output.
No idea why it does not work?
$value1 = "[$datastorename] $syslogFoldername / $hostname.log.
$value2 = ' [] / scratch/log ".Game-VMHostAdvancedConfiguration - VMHost $vmhost - name of the "ScratchConfig.ConfiguredScratchLocation" - value $value1
Game-VMHostAdvancedConfiguration - VMHost $vmhost - name of the "Syslog.global.log.DirUnique" - value $value2Game-VMHostAdvancedConfiguration: 25/02/2013-11:55:51 Set-VMHostAdvancedConfiguration
A specified parameter was not correct.D:\sm\ScratchFolders\folder.ps1:23 char: 33
+ Set VMHostAdvancedConfiguration < < < <-VMHost $vmhost - name ScratchConfig.ConfiguredScratchL «»
apartment"- value $value1
+ CategoryInfo: NotSpecified: (:)) [game-VMHostAdvancedConfiguration], InvalidArgument)
+ FullyQualifiedErrorId: Client20_SystemManagementServiceImpl_GetVmHostAdvancedConfiguration_
ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.SetVMHostAdvancedConfigurationGame-VMHostAdvancedConfiguration: 25/02/2013-11:55:52 Set-VMHostAdvancedConfiguration
"Syslog.global.log.DirUnique" is not valid or exceeds the maximum number of characters allowed.
D:\sm\ScratchFolders\folder.ps1:25 tank: 36
+ Set VMHostAdvancedConfiguration < < < <-VMHost $vmhost - name of the "Syslog.global.log.DirUnique" - will
read $value2
+ CategoryInfo: NotSpecified: (:)) [game-VMHostAdvancedConfiguration], InvalidName)
+ FullyQualifiedErrorId: Client20_SystemManagementServiceImpl_GetVmHostAdvancedConfiguration_
ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.SetVMHostAdvancedConfigurationAs far as I know the 1 config entry should be a path in the local file, something like system "/ vmfs/volumes /...» »
See KB1033696.
For value 2, the key must be "Syslog.global.logDirUnique".
Game-VMHostAdvancedConfiguration - VMHost $vmhost - name of the "Syslog.global.logDirUnique" - value $value2
-
Need help with setting the value of the variable in the callable statement in the OPS
Hi all
I use a callable statement in my code, I put the value as below.
String updateStmt = "BEGIN TEST_PKG. MAIN_PROCEDURE ("+
":1)" +
"; END; « ;
CallableStatement cstmt is getDBTransaction (.createCallableStatement(updateStmt,1));.
cstmt.setString (1, empRow.getLinenum () m:System.NET.SocketAddress.ToString ());
but the problem is when the value of 1 is NULL, I'm not able to call the procedure, it is not inserting data into the table, but when the value of 1 is not null, it is able to call the procedure and inserting the data correctly.
Please help me urgent.
Hello
Please make changes as below
If (empRow.getLinenum (). ToString ()! = null)
{
String updateStmt = "BEGIN TEST_PKG. MAIN_PROCEDURE ('+': 1) «+»; END; « ;
CallableStatement cstmt is getDBTransaction (.createCallableStatement(updateStmt,1));.
cstmt.setString (1, empRow.getLinenum () m:System.NET.SocketAddress.ToString ());
}
Also check out the link Oracle Application Framework Dilip Articles: education prepared - controller
Thank you
Dilip
-
Help with setting level and hard drive space allocation
I use a Macbook Pro, aged 1 year, 200 GB of HD. When I first installed the merger about a year ago, I think I have too much space allocated for the merger. I allocated 100 GB (basically split the Mac HD). I use many more apps in XP Pro as on the Mac side. Now, I met two problems:
1. I'm running out of space on the side Mac (went to update the Mac OS software recently and I was told I couldn't because of the lack of space; need to 9 GB and had only 4 GB of available). Then, I went to Fusion update (am currently uses version 1.1.3) and following the instructions of PDF of VMWare, went to duplicate virtual machine and could not do. Windows XP virtual machine uses 110 GB according to Get Info, so it's too big to duplicate.
When I check the size of the virtual C drive on side Windows that indicates that I use GB 49 of the 100 assigned and a bit more 50 GB is unused space. I know that I do not understand the virtual machines and, apparently, I thought it was just too much space on the windows 'side' is actually space on the Mac 'side' so. Don't know if it is correct or not. Anyway, it seems to me that I was able to allocate less space to the virtual machine, and then have the space to reproduce? Is this correct? If so, how do I?
2. assuming that the above problem can be straightened out, can I just install the latest version of the merger by the instructions by VMWare PDF file?
Any help much appreciated and thanks in advance,
Win
Yes you can upgrade now if you want and you can download the latest (including 2.0.4 at present) version of the Web Site from VMware and is a free update for users of Fusion 1.x and it uses Fusion 1.x serial number.
I'll get back to you later today on what else can be done to limit the growth, however, preventing you from upgrading.
-
[10 g/8i] Need help with setting up a query
I have a query that takes about 5 minutes to run, and if there is a way to make it faster, I would like to know. It is not a huge problem, but I get to sleep while waiting for it to end. =)
Here are the results of the explain plan command and the extra stuff generated by autotrace...
I also have the tkprof output, but let's start with that. I have absolutely no idea where to even start looking for something to improve.SQL> show parameter optimizer NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ optimizer_dynamic_sampling integer 2 optimizer_features_enable string 10.2.0.1 optimizer_index_caching integer 0 optimizer_index_cost_adj integer 100 optimizer_mode string ALL_ROWS optimizer_secure_view_merging boolean TRUE SQL> SQL> show parameter db_file_multi NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ db_file_multiblock_read_count integer 128 SQL> SQL> show parameter db_block_size NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ db_block_size integer 8192 SQL> SQL> show parameter cursor_sharing NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ cursor_sharing string EXACT SQL> SQL> column sname format a20 SQL> column pname format a20 SQL> column pval2 format a20 SQL> SQL> select 2 sname 3 , pname 4 , pval1 5 , pval2 6 from 7 sys.aux_stats$; SNAME PNAME PVAL1 PVAL2 -------------------- -------------------- ----------- -------------------- SYSSTATS_INFO STATUS COMPLETED SYSSTATS_INFO DSTART 02-07-2006 22:54 SYSSTATS_INFO DSTOP 02-07-2006 22:54 SYSSTATS_INFO FLAGS 1.000 SYSSTATS_MAIN CPUSPEEDNW 500.790 SYSSTATS_MAIN IOSEEKTIM 10.000 SYSSTATS_MAIN IOTFRSPEED 4,096.000 SYSSTATS_MAIN SREADTIM SYSSTATS_MAIN MREADTIM SYSSTATS_MAIN CPUSPEED SYSSTATS_MAIN MBRC SYSSTATS_MAIN MAXTHR SYSSTATS_MAIN SLAVETHR 13 rows selected. Elapsed: 00:00:00.03 SQL> explain plan into plan_table for 2 SELECT CONNECT_BY_ROOT b.parent_part AS part_nbr 3 , b.parent_part 4 , b.child_part 5 , eval_number ('1' || SYS_CONNECT_BY_PATH (b.qty_per, '*')) AS qty 6 FROM ( 7 SELECT doc_nbr AS parent_part 8 , comp_part AS child_part 9 , line_nbr 10 , qty_per 11 FROM bill@DB8I 12 WHERE lst_code IN ('G','M') 13 AND begn_eff <= SYSDATE 14 AND end_eff > SYSDATE 15 AND component_type = 'R' 16 AND doc_type = 'BILL' 17 AND status = 'RL' 18 ) b 19 , part@DB8I p 20 , dual 21 WHERE b.child_part = p.part_nbr 22 START WITH b.parent_part = 'MYPARTNBR' 23 CONNECT BY b.parent_part = PRIOR b.child_part 24 AND PRIOR p.part_type = 'M' 25 ; Explained. Elapsed: 00:00:00.23 SQL> select * from table(dbms_xplan.display); PLAN_TABLE_OUTPUT ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Plan hash value: 2565617462 -------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT| -------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | 299 | 519 (14)| 00:00:07 | | | |* 1 | CONNECT BY WITH FILTERING| | | | | | | | |* 2 | FILTER | | | | | | | | | 3 | COUNT | | | | | | | | | 4 | NESTED LOOPS | | 1 | 299 | 519 (14)| 00:00:07 | | | | 5 | NESTED LOOPS | | 1 | 217 | 517 (14)| 00:00:07 | | | | 6 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 | | | | 7 | REMOTE | BILL | 1 | 217 | 515 (14)| 00:00:07 | DB8I | R->S | | 8 | REMOTE | PART | 1 | 82 | 2 (0)| 00:00:01 | DB8I | R->S | |* 9 | HASH JOIN | | | | | | | | | 10 | CONNECT BY PUMP | | | | | | | | | 11 | COUNT | | | | | | | | | 12 | NESTED LOOPS | | 1 | 299 | 519 (14)| 00:00:07 | | | | 13 | NESTED LOOPS | | 1 | 217 | 517 (14)| 00:00:07 | | | | 14 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 | | | | 15 | REMOTE | BILL | 1 | 217 | 515 (14)| 00:00:07 | DB8I | R->S | | 16 | REMOTE | PART | 1 | 82 | 2 (0)| 00:00:01 | DB8I | R->S | | 17 | COUNT | | | | | | | | | 18 | NESTED LOOPS | | 1 | 299 | 519 (14)| 00:00:07 | | | | 19 | NESTED LOOPS | | 1 | 217 | 517 (14)| 00:00:07 | | | | 20 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 | | | | 21 | REMOTE | BILL | 1 | 217 | 515 (14)| 00:00:07 | DB8I | R->S | | 22 | REMOTE | PART | 1 | 82 | 2 (0)| 00:00:01 | DB8I | R->S | -------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter("DOC_NBR"='MYPARTNBR') 2 - filter("DOC_NBR"='MYPARTNBR') 9 - access("DOC_NBR"=NULL AND NULL='M') Remote SQL Information (identified by operation id): ---------------------------------------------------- 7 - SELECT "DOC_NBR","BEGN_EFF","END_EFF","LST_CODE","COMP_PART_NBR","QTY_PE R","COMPONENT_TYPE","DOC_TYPE","STATUS" FROM "BILL" "BILL" WHERE "COMPONENT_TYPE"='R' AND "DOC_TYPE"='BILL' AND "STATUS"='RL' AND ("LST_CODE"='G' OR "LST_CODE"='M') AND "END_EFF">:1 AND "BEGN_EFF"<=:2 (accessing 'DB8I ' ) 8 - SELECT "PART_NBR","PART_TYPE" FROM "PART" "P" WHERE :1="PART_NBR" (accessing 'DB8I ' ) 15 - SELECT "DOC_NBR","BEGN_EFF","END_EFF","LST_CODE","COMP_PART_NBR","QTY_PE R","COMPONENT_TYPE","DOC_TYPE","STATUS" FROM "BILL" "BILL" WHERE "COMPONENT_TYPE"='R' AND "DOC_TYPE"='BILL' AND "STATUS"='RL' AND ("LST_CODE"='G' OR "LST_CODE"='M') AND "END_EFF">:1 AND "BEGN_EFF"<=:2 (accessing 'DB8I ' ) 16 - SELECT "PART_NBR","PART_TYPE" FROM "PART" "P" WHERE :1="PART_NBR" (accessing 'DB8I ' ) 21 - SELECT "DOC_NBR","BEGN_EFF","END_EFF","LST_CODE","COMP_PART_NBR","QTY_PE R","COMPONENT_TYPE","DOC_TYPE","STATUS" FROM "BILL" "BILL" WHERE "COMPONENT_TYPE"='R' AND "DOC_TYPE"='BILL' AND "STATUS"='RL' AND ("LST_CODE"='G' OR "LST_CODE"='M') AND "END_EFF">:1 AND "BEGN_EFF"<=:2 (accessing 'DB8I ' ) 22 - SELECT "PART_NBR","PART_TYPE" FROM "PART" "P" WHERE :1="PART_NBR" (accessing 'DB8I ' ) ... ... ... Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter("DOC_NBR"='MYPARTNBR') 2 - filter("DOC_NBR"='MYPARTNBR') 9 - access("DOC_NBR"=NULL AND NULL='M') Remote SQL Information (identified by operation id): ---------------------------------------------------- 7 - SELECT "DOC_NBR","BEGN_EFF","END_EFF","LST_CODE","COMP_PART_NBR","QTY_PE R","COMPONENT_TYPE","DOC_TYPE","STATUS" FROM "BILL" "BILL" WHERE "COMPONENT_TYPE"='R' AND "DOC_TYPE"='BILL' AND "STATUS"='RL' AND ("LST_CODE"='G' OR "LST_CODE"='M') AND "END_EFF">:1 AND "BEGN_EFF"<=:2 (accessing 'DB8I ' ) 8 - SELECT "PART_NBR","PART_TYPE" FROM "PART" "P" WHERE :1="PART_NBR" (accessing 'DB8I ' ) 15 - SELECT "DOC_NBR","BEGN_EFF","END_EFF","LST_CODE","COMP_PART_NBR","QTY_PE R","COMPONENT_TYPE","DOC_TYPE","STATUS" FROM "BILL" "BILL" WHERE "COMPONENT_TYPE"='R' AND "DOC_TYPE"='BILL' AND "STATUS"='RL' AND ("LST_CODE"='G' OR "LST_CODE"='M') AND "END_EFF">:1 AND "BEGN_EFF"<=:2 (accessing 'DB8I ' ) 16 - SELECT "PART_NBR","PART_TYPE" FROM "PART" "P" WHERE :1="PART_NBR" (accessing 'DB8I ' ) 21 - SELECT "DOC_NBR","BEGN_EFF","END_EFF","LST_CODE","COMP_PART_NBR","QTY_PE R","COMPONENT_TYPE","DOC_TYPE","STATUS" FROM "BILL" "BILL" WHERE "COMPONENT_TYPE"='R' AND "DOC_TYPE"='BILL' AND "STATUS"='RL' AND ("LST_CODE"='G' OR "LST_CODE"='M') AND "END_EFF">:1 AND "BEGN_EFF"<=:2 (accessing 'DB8I ' ) 22 - SELECT "PART_NBR","PART_TYPE" FROM "PART" "P" WHERE :1="PART_NBR" (accessing 'DB8I ' ) Statistics ---------------------------------------------------------- 381 recursive calls 1 db block gets 0 consistent gets 0 physical reads 304 redo size 15558 bytes sent via SQL*Net to client 417 bytes received via SQL*Net from client 5 SQL*Net roundtrips to/from client 6 sorts (memory) 0 sorts (disk) 379 rows processed SQL> disconnect Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - ProductionPerformance would be much better if the whole query would be executed on the remote side, but the query uses the local function eval_number as well as parts of the query are executed on the remote side and results are brought alongside local and then only filtering is performed. Try the following:
SELECT part_nbr, parent_part, child_part, eval_number ('1' || path) qty FROM ( SELECT CONNECT_BY_ROOT b.parent_part part_nbr, b.parent_part, b.child_part, SYS_CONNECT_BY_PATH(b.qty_per, '*') path FROM ( SELECT doc_nbr parent_part, comp_part child_part, line_nbr qty_per FROM bill@DB8I WHERE lst_code IN ('G','M') AND begn_eff <= SYSDATE AND end_eff > SYSDATE AND component_type = 'R' AND doc_type = 'BILL' AND status = 'RL' ) b, part@DB8I p WHERE b.child_part = p.part_nbr START WITH b.parent_part = 'MYPARTNBR' CONNECT BY b.parent_part = PRIOR b.child_part AND PRIOR p.part_type = 'M' ) /SY.
-
Newbie need help with setting up new WebLogic domain
Installed ALBMP for WebLogic Enterprise on a distribution SUSE Linux running on VMWare. Installation completed successfully and works through the configuration of the installation via the Configuration Wizard. I have problems creating a new WebLogic domain. He throws it toward the high "WebLogic invalid Home" when I try to enter any path directory for this field. He won't let me leave this field empty. Can anyone help? I am running version ALBPM 6.0 M3.
Thank you.Which way you give? a valid weblogic House is F:\bea102\wlserver_10.0 under windows. I think that you not include the wlserver directory.
-
All new to APEX and Oracle - need help with setting up email
I have looked at the APEX for a few months now and finally took the plunge. I installed Oracle 11 g enterprise, 4.2 APEX, APEX listener 2.05 and GlassFish 4. Fine surpringly and I did the step "Activate the Oracle 11 g database Network Services" in the installation guide and can connect to the APEX Admin Services page. I'm about to create my first workspace and realized that only to not configure the e-mail for the APEX instance settings still (the SMTP host address, etc.) I wanted to make sure that the admin workspace would have received an email from the system.
I'll do it soon, but my question is what I have to do something else for the instance of the APEX or the database itself to send?
Thanks in advance!
Hello
If you already Activate Network Services for schema of the APEX to access SMTP server, you just need to Configure Email.
If your SMTP server uses SSL/TLS, you must also Configure portfolio and import the certificate to the SMTP server to the wallet.
Kind regards
Jari
Maybe you are looking for
-
I know how to set correctly in homepage. I'm an experienced user. My problem is when I start Firefox 20.0.1 it always starts two tabs. The first is the correct home page. The second is a blank tab switching to. I want only the first tab that is the h
-
Toshiba WL768 - abandonment of BBC HD photo
I have frequent picture abandonment (i.e. black screens about 1 seconds) while watching the BBC HD on a WL768 from Toshiba TV. The sound is fine. Y at - it a firmware update or something else that can solve this problem please? I am aware of its aban
-
Satellite L300-1BW - BSOD and then the password at startup appeared
Hello I'm new hear that ive just got a laptop Toshiba L300 - 1bw Windows vista, intel celeron. I changed the laptop on it gives the initial toshiba screen then goes to a blue screen and request a password. I tried f8 when turning on pc ive tried f12
-
volume troppo basso anche con indicatori al massimo nel volume mixer
Ho UN pc acer aspire 5742z. Pure mettendo al massimo nel Mixer volume tutti gli indicatori, basso of enough it volume remains. Qualcuno mi Può help? Grazie
-
Why is my computer sometimes crash with horizontal lines?
my computer start good, and when for example open work program or do something in intenert at the moment is the rout of horizontal lines and never recovery only if I stop with the button start again, sometimes continuously work well and sometimes a s