Help with the calculations of the form

Similar Questions

• Need help with the form

  Hola

  Yes, even once, I need help.

  Please help me figure out why this form does not work.

  http://mydsigner.com/Claudia/pages/catering.html

  "If you see where the ' Capcha ' is?  In this box, there are ONLY 3 LETTERS/NUMBERS and 6 show.

  I can't find anywhere the process.php

  Going nuts :-(

  The original page is here:http://www.lascasuelasmexicanrestaurant.com/catering/

  It's 'Always' part of the site is mainly about php (?)

  Link here: https://forums.adobe.com/thread/1772037?sr=inbox

  Well, the site is almost done, just this little problem.

  A big thank you to all

  Salads from California

  You don't need this at the bottom of the page:

  You have a more recent call (1.11.1) at the library of the jQuery framework:

  2 scripts are contradictory, stop the datepicker work, so delete the old. The validation of the form should still work using the script more up-to-date.

• help with the form builder

  Fit, I have the edit button and its function is that when I press the button change go IDs (text_item) and run the query

  but my problem is that when I enter text_item in any id it displays just first record

  for example

  When I enter id... 1 data display

  but I enter the id 2, 3, 4... its just id 1 information display

  Use of pre_query trigger.

  For example

  You write the code below in your button.

  Go_Block ('Your_Block_Name');

  Execute_Query (No_Validate);

  After that, you write the query pre relaxing on your query block.

  Set_Block_Property ('Your_Block_Name ', Default_Where,' Id =' |: MYSEARCHBLOCK.) Item_Id);

• If anyone can help with a calculation in Acrobat forms?

  I have a form created in Acrobat and impossible to get a calc to function. Field ' # guests_2 ' Gets an amount and should be multiplied by $75 for a total field of '2' HELP Please! Thank you

  There are two ways to do this. Tab in calculation of the properties of the field for the field '2' do either:

  1 field option simplified rating:

  Enter the following information: #\ guests_2 * 75

  It would be better if you changed the name of the field to something like "num_guests_2", so the entry could be changed to:

  num_guests_2 * 75

  2. custom calculation script:

  Enter the following text:

  Set this field value

  GetField("#_guests_2").value = Event.Value * 75.

  Assuming that the ' guests_2 # ' the field is numeric. You don't have to change the name of the field for that, but I think it would still be a good idea.

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  The former owner must unlock with their password, or give you the password. Otherwise, the phone doesn't help you and no one can help you. Get your money back if you can.

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.

• When we publish a Web site create in MUSE, the server must be linux? Please let me know because I have the problem with the form works... now the server that I use is the window...

  I am trying to publish in my domain on windows server, but I have a problem with the form...

  The server must be linux to work the form?

  Thanks in advance for your help...

  Thank you Brad... but how can I understand if a Linux server support? I try to do something in particular?

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• I can create forms in the designer, but when I use a data model, I can't interact with the form

  In LiveCycle Designer ES2 I can create a form and then preview and interact with the form.

  This guess I just build objects by dragging the pieces pre-made object on the form (for example, text field) - which I can name, wrap in subforms something - I can add actions and all is well.  When I preview the PDF, I can enter data in the fields, click on the radio buttons, making things appear that everything is great.

  But LC ES2 is based on the data driven development model by, so in my case I need a form guide as well as the form - so it's better to have a model of data created in the first place - and then create the form based on the data model - then build guide form based on the data model - it is also a good idea, and I'm cool with that.

  My problem is that when I'm building a data model (just for a quick and dirty development demo, not associated with services back-end or databases) and I create the form based on the data model - I can't interact with all objects in the preview pane form - further when I launch the workspace and call my process that contains the form - I even can't interact with the form.

  What I am doing wrong?

  Summons - I can create a form and interact with it - but If I start with a data model and generate the form based on that - I can't interact with the form (option buttons click-I can not enter data in form fields - etc) what causes this?  What should I do to use a data model and be able to create an interactive form? >

  Does anyone know what causes this problem?  It's driving me crazy.

  Thank you-

  Ben

  You do not hurt anuthing. It works as advertised. When you generate a Guide and work with a fml data model designer you will only create a static non-fillable PDF file. This is because when you import the model in the designer of the model must be turned in a schema. The schema may not represent constraints and validations can be encoded in the model. The only thing that can be maintained is the structure, so Designer forbids you to buidl an interactive form.

  If you know what you're doing, you could take the data it is generated from the Guide and merge on a XDP template file that you create (unless he models in a first time - you can use the sample XML data as a starting point) using LC forms. Edowmside, is that if there are constraints and rules you would have to code them in the model as well. That's the way it is now there, but it will improve over time, as more of the ability of the model is exposed to the XFA world.

  Hope that helps

  Paul

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.

• How to create the new library of Photos to iCloud without it merging with the former?

  I started my iCPL in January 2015. It is now 104 Gb/8000 photos. In a year I need to upgrade my plan of storage iCloud.

  So I think I would make the existing one a regular photo library, and start a new photo library iCloud.

  If I start a new library now and make the iCPL, merge it with the existing iCPL. I want to replace the existing in iCloud.

  I could do (I think): -.

  1. make the existing a non-iCPL and rename it.

  2. create a new lib Photos and make the library system iCloud.

  3. the new library (empty) will download and merge with the former in iCloud, so it contains now 8000 photos of the original lib.

  4. delete all the 8000 photos in the new.

  5. start put new photos in the photo library now empty iCloud.

  Is there a better way? I do it too difficult?

  I can see what I've described above taking a long time to settle on all devices, even if I can avoid 30 day waiting by removing the deleted record recently.

  Thank you

  You use "Optimize Mac Storage" on your Mac? Then, you will need to make sure that all the photos to download to your Mac before you copy your current library corresponding to your backup disk and start deleting iCloud.  Is there enough free storage on your Mac to do this?

  I would also like to than my thin iCloud library. My iCloud library has only my favorite photos of many years, I want on all my devices as well as the most recent photos that I'm still trying. Because the iCloud library must be the library system, only in iCloud library photos are available in the media for other applications browser, so I keep all the photos here that I can use in other applications.

  What I do to save bandwidth and download time is to have two libraries:

  1. A large library where I keep all the photos I want to keep - it's my photo archives. This library is on an external drive that is supported by Time Machine and is currently still an Aperture library.
  2. A smaller library iCloud in my pictures folder.

  I import new photos first to the iCloud library, remove all the bad moves that do not need archiving, then I export the originals at the library of the archives.

  And then I start editing the photos in the library to iCloud and learn by removing and keeping only the best photos.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• help with the beats on my envy 17-3270nr, n key

  help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

  Hello

  Download and install the following.

  HP OSD utility.

  Proximity sensor driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K