Help with the enforcement code model

I need to find a way to apply a pattern that I can't enforce through the specification of the normal template.

I have a field that must be two numeric characters.  If only a numeric character is entered, then it must be two characters, with the first main character being zero.  So, if you enter 3, then the field becomes 03.

In addition, none of the non-numeric characters cannot be accepted.  Unfortunately, if I try to specify a model in a numeric field, then it converts all non-numeric characters zeros!  Who does not work for my application.

The plan I came up with is this: make the field so that it is not wide enough for the characters to width fixed to fit and check the box to limit the length of field to the visible area.  Then enter the code on the output event that will check the characters who had entered one at a time, first the left then the right.  It can examine the ASCII values for these characters to ensure that they represent 0 to 9 digits; This would mean that the ASCII value of each character must be greater than or equal to 48 and less than or equal to 57.  If one of the characters does not pass this test, then the computer will beep (as it does when I try to enter an alphabetic character in a numeric or decimal field, if it is possible to make a beep like that) and the field is cleaned.

Can someone help me with this code?  I know I have to use javascript instead of formcalc (since there is no function ASCII in formcalc I know), and I don't know javascript, so I'm at a loss.

Thanks for any help...

Hello

As with most of the code, there are a number of ways to do this. Here is an example that you can add to the event of output of the field in question and make sure that the language is set to JavaScript, or well the code generates an error. I've added comments for you to see what is happening:

var myRegex = / ^ \d{2}$/; This corresponds to a 2-digit model

var singleDigits = [0,1,2,3,4,5,6,7,8,9]; Table for verification to a single digit

for (var i = 0; i)< singledigits.length;="" i++){="" loop="" through="" single="" digit="">

If (this.rawValue == i) {/ / if the value is a number in the table}

this.rawValue = "0" + i; Add a "0" in front

}

}

If (this.rawValue! = null | this.rawValue! = ") {/ / only if the field contains a value...}

If (! this.rawValue.match (myRegex)) {/ / and it does not match the model (i.e. 2 digits)}

this.rawValue = "; Clear the field

xfa.host.setFocus (this); set the focus on the ground

xfa.host.messageBox ("error: reason for conflict.") Only 2 digits can be entered in this field. ") ; Enter any message you want here

}

}

This field must be a text field for the '0' to be added to the front, otherwise, if it is a numeric field, the code will try to add the '0' mathematically the number entered and you'll end up with a single digit again.

Another option is to make the field a comb 2 numbers and then you can delete the second block of code.

-

Dallas

Tags: Adobe LiveCycle

Similar Questions

  • can someone help with the following code plsql errors...

    Hello

    If anyone can help with the following code... to get a successful outing.

    create or replace package lib_01 as

    procedure lib_proc01 (p_user_id in numbers, p_user_name in varchar2);

    end lib_01;

    create or replace package body lib_01 as

    procedure lib_proc01 (p_user_id in numbers, p_user_name in varchar2) as

    number of v_user_id;

    v_user_name varchar2 (50);

    number of v_avl_books;

    number of v_avl_days;

    date of v_end_date;

    date of v_return_date;

    Start

    dbms_output.put_line ('Enter User Name');

    dbms_output.put_line (' username :'|| p_user_name);

    Select user_id, user_name in v_user_id v_user_name of user_registration where user_name = p_user_name;

    If v_user_name <>p_user_name then

    dbms_output.put_line (' username is not.) Please submit full name ');

    end if;

    If v_user_id is null or v_user_name is null then

    dbms_output.put_line ("' user not found");

    validate_userLogin;

    on the other

    validate_issuedbooks (p_issuecount);

    end if;

    If v_issuecount < v_avl_books then

    issuebooks;

    on the other

    Number of return of late_fee (p_mem_id, p_extradays, p_latefee_total);

    end if;

    If paid_flag = "Y" then

    issuebooks;

    on the other

    dbms_output.put_line ("' book may be issued due to its maximum reached late fees");

    end if;

    end lib_proc01;

    procedure validate_userLogin is

    procedure reg_proc is

    procedure user_validate (p_id_proof in varchar2, p_id_no out varchar2) is

    v_id_proof varchar2 (20);

    v_id_no varchar2 (20);

    Start

    Select user_name, id_proof, id_no, v_user_name, v_id_proof, v_id_no of user_registration where id_proof = p_id_proof;

    If v_id_proof = "Adhar_Card" then

    dbms_output.put_line ('user a valid proof of ID');

    dbms_output.put_line (' and the id no. :'|| is p_id_no).

    on the other

    dbms_output.put_line ('Invalid ID evidence.) Please submit valid proof of ID ');

    end if;

    exception

    When no_data_found then

    dbms_output.put_line ('No Data found');

    end user_validate;

    procedure member_validate (p_mem_id series)

    v_mem_flag char (1);

    curr_date date: = sysdate;

    date of v_mem_enddate;

    Start

    dbms_output.put_line('Mem_flag:'|| v_mem_flag);

    Select mem_flag in the v_mem_flag of user_login where user_id = v_user_id;

    If v_mem_flag = 'n' or v_mem_flag is null then

    dbms_output.put_line ('The User do not have membership');

    on the other

    Select mem_id in the v_mem_id of user_login where user_id = v_user_id;

    dbms_output.put_line ('the user has membership');

    v_mem_id: = p_mem_id;

    Select mem_enddate in the member_login v_mem_enddate where mem_id = v_mem_id;

    If v_mem_enddate < curr_date then

    dbms_output.put_line ('Membership has expired' | v_mem_id |' on ' | v_mem_enddate);

    on the other

    dbms_output.put_line ('User a validity again' | v_mem_enddate);

    end if;

    end if;

    exception

    When no_data_found then

    dbms_output.put_line ("' no data found");

    while others then

    dbms_output.put_line (' another error.) Please find");

    end member_validate;

    Start

    insert into user_registration values ('& first_name ',' & last_name', null, ' & user_type',)

    address_ty ("& bldg_no",

    '& bldg_name',

    '& Street',

    ' & city ",

    '& State',

    '& zip'

    ),

    user_phone ',' & user_mail ',' mem_idproof', ' & id_no');

    Dbms_output.put_line ('user is properly registered');

    exception

    When no_data_found then

    dbms_output.put_line ("' data not found");

    end reg_proc;

    Start

    Dbms_output.put_line (' enter ID or user name ');

    Dbms_output.put_line (' username: ' | p_user_name);

    If v_user_name is null then

    Dbms_output.put_line ('user not found');

    reg_proc;

    Insert user_login SELECT user_id_seq. NEXTVAL, user_name, NULL, mem_id_seq. NEXTVAL, user_type FROM user_registration WHERE user_name is lower (p_user_name);

    Dbms_output.put_line (' because the user wants to have the membership? ");

    Dbms_output.put_line ('If Yes, please pay dues");

    INSERT INTO member_login SELECT mem_id_seq. CURRVAL, SYSDATE, SYSDATE + avl_days, 500, 'Y' of user_login ul, bl book_loan WHERE ul.mem_type = bl.mem_type AND user_name = p_user_name;

    END IF;

    exception

    When no_data_found then

    dbms_output.put_line ("' no data found");

    When too_many_rows then

    dbms_output.put_line (' too many lines).

    END validate_userLogin;

    procedure validate_issuedbooks (p_issuecount series)

    number of v_issuecount;

    Start

    Select user_login u, bl book_loan, avl_days, avl_books in v_avl_days, v_avl_books where bl.mem_type = u.mem_type and user_id = p_user_id;

    SELECT count (case when end_date < end return_date then p_mem_id) as invalidcount in v_issuecount from book_count where mem_id = p_mem_id;

    v_issuecount: = p_issuecount;

    dbms_output.put_line (' no. books that the user contains the :'|| p_issuecount);

    end validate_issuedbooks;

    procedure issuebooks is

    procedure book_avl (p_avl_now_flag in p_avl_date Boolean, date) is

    v_avl_now_flag char (1);

    date of v_avl_date;

    procedure reader_bookissue is

    Start

    insert into values drive (p_user_id, v_book_id, sysdate, sysdate, null);

    insert into book_count values(p_mem_id,v_book_id,sysdate,sysdate,null);

    Update book_availability set issued_to is "Reader" where book_id = v_book_id;.

    end reader_bookissue;

    Start

    Select book_name, b.book_id avl_now_flag v_book_name, v_book_id, v_avl_now_flag of the book b, book_availability b where b.book_id = ba.book_id and ba.book_id = p_book_id;

    If v_avl_now_flag = "Y" then

    dbms_output.put_line ('the book is available for issuance' | v_book_id);

    on the other

    Select mem_type in the v_mem_type of user_login where user_id = (select user_id from book_availability where avl_now_flag = 'n' and book_id = p_book_id);

    If v_mem_type = "Reader" then

    reader_bookissue;

    dbms_output.put_line (' the book is with Reader.) Please try tomorrow.') ;

    on the other

    dbms_output.put_line ('the book is member');

    end if;

    Select avl_date in the book_availability v_avl_date where book_id = p_book_id;

    v_avl_date: = p_avl_date;

    dbms_output.put_line (' the available date is: ' | p_avl_date);

    end if;

    end book_avl;

    Start

    insert into book_count values(p_mem_id,p_book_id,sysdate,sysdate+v_avl_days,v_return_date);

    Update book_availability set book_id = p_book_id, avl_now_flag = 'n', avl_date is to_date (sysdate + v_avl_days,' dd-mm-yyyy ""), issued_to = v_mem_type, user_id = p_user_id where mem_id = p_mem_id;

    commit;

    dbms_output.put_line ("' the book published successfully");

    end issuebooks;

    Number of function return late_fee (p_mem_id in number, p_extradays series, p_latefee_total number) is

    number of v_extradays;

    number of v_latefee_total;

    number of v_latefee_per_book;

    number of v_latefee_per_day;

    number of v_book_count;

    Start

    Select trunc (sysdate) - v_end_date in v_extradays from book_received where mem_id = p_mem_id and book_id = p_book_id;

    p_extradays: = v_extradays;

    v_latefee_per_book: = v_latefee_per_day * v_extradays;

    v_latefee_total: = v_latefee_per_book * v_book_count;

    p_latefee_total: = v_latefee_total;

    dbms_output.put_line ('The total AMT for not returned books' | p_latefee_total);

    end late_fee;

    end lib_01;

    Hello

    I checked the first 10 lines after the beginning and I could count already several errors.

    Is it an exercise or a real code, you must provide?

    Kind regards.

    Alberto

  • Need help with the error Code 80244019 Windows Update

    From: Doug

    I get code 80244019 whenever I try to use Windows Update. I tried to change the DWORD in regedit nothing helps... Norton has recently found and 'resolved' trojan.zlob in 128 files in the registry, 21 cases (10 of which were in system32) and 1 browser cache. Whenever I try to use IE to go to http://windowsupdate.microsoft.com I am redirected to msn.com.

    Any advice or solutions would be welcome.

    From: PA bear [MS MVP]

    Chances are that ZLOB was not completely removed and she was accompanied by infections Vundo and SDBot variant, all protected by a rootkit infection. You are going to need specialized assistance to clean this machine,

    Unexplained computer behavior may be caused by deceptive software

    http://support.Microsoft.com/kb/827315

    Run a check of /thorough/ for hijackware, including post your hijackthis on a proper forum log.

    Verification / help with Hijackware

    http://aumha.org/a/parasite.htm

    http://aumha.org/a/quickfix.htm

    http://aumha.NET/viewtopic.php?t=5878

    http://wiki.CastleCops.com/Malware_Removal_and_Prevention:_Introduction

    http://MVPs.org/winhelp2002/unwanted.htm

    http://inetexplorer.MVPs.org/data/prevention.htm

    http://inetexplorer.MVPs.org/tshoot.html

    http://www.MVPs.org/sramesh2k/Malware_Defence.htm

    http://defendingyourmachine2.blogspot.com/

    http://www.elephantboycomputers.com/page2.html#Removing_Malware

    When all else fails, HijackThis v2.0.2

    (http://aumha.org/downloads/hijackthis.exe) is the tool to use.

    It will help you to identify and remove any hijackware/spyware with

    assistance of an expert.  * Post your log to

    http://aumha.NET/viewforum.php?f=30,

    http://forums.Spybot.info/forumdisplay.php?f=22,

    http://CastleCops.com/forum67.html, or other appropriate review bodies

    by an expert in the field, not here.* *.

    If the procedures look too complex - and there is no shame in admitting

    isn't your cup of tea - take the local machine, good reputation and

    independent computer repair shop (i.e., not BigBoxStoreUSA).

    --

    ~ Robear Dyer (PA Bear)

    Another response of the community of Windows Vista discussion groups

  • Need help with the error code 80070424

    I'm not able to update my windows vista. It gives the error code 80070424 and says 'windows can not find updates of nw'. I am not able to change all settings also unsuccessfully. Help, please.

    Hello

    Please, try the following:

    Click Start > run >
    Type the command of follow-up in the Open box.
    "net.exe stop wuauserv" (without quotes)
    Press Ok

    Repeat the same for the following commands:

    Regsvr32.exe c:\windows\system32\wuapi.dll
    Regsvr32.exe c:\windows\system32\wups.dll
    Regsvr32.exe c:\windows\system32\wuaueng.dll
    Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
    Regsvr32.exe MSXML3.dll
    Regsvr32.exe qmgr.dll
    Regsvr32.exe qmgrprxy.dll
    NET.exe start wuauserv

    Restart the computer and try again.

  • Need help with the error Code: 1002 please!

    I am trying to update my CC Id & get the error Code: 1002

    Any suggestions before I try to support?

    Thank you!

    Hello

    Please follow the steps below:

    Uninstall CC Desktop App using https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html

    Run the tool cleaning Adobe CC from here: https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

    Restart your computer

    Install creative cloud app: https://www.adobe.com/creativecloud/desktop-app.html

    Let us know if it works!

  • Need help with the error code Udates Windows 0 x 80070424

    Hi, can someone give me some advice on how to enable Windows Auto Udates back, they seemed to have close the cottages and after trying to use all the options available I knew I am now facing an error code when I try to use the Microsoft Web site myself to get them. He responds just error Code 0 x 80070424. Thanks, any help would be great so if you "ve had this problem before or heard about what's going on could you please send me one. Brad

    See: http://support.microsoft.com/kb/968002

    -steve

  • How to get help with the error Code: U44M1U5?

    I just bought a new laptop with Windows 10 on it. I installed a new copy of Photoshop elements 13. I noticed that some features do not work when you click them. For example, when you try to create a new catalog, I clicked file > manage catalogs, but nothing happens. Similarly, the organizer has imported audio clips. I can't delete them. When I click on the option to remove the selected options of the Organizer, nothing happens. I got a popup telling me that updates are available. I tried to install them, but the installation fails every time. I get an U44M1U5 error code. How to solve this?

    PTL, I was able to get the problem solved. It turned out to be a fix of the 2 part. #1 problem: The buttons and functions that were not working in 13 items. I downloaded the latest updates for Windows 10 and that fixed that problem. I am now able to create catalogs, remove items from catalogues etc.  Problem #2: U44M1U5 error Code. I tried to download updates all 3 components suggested at the same time (AAM, first 13 elements and Photoshop Elements 13/Adobe Camera Raw 9). A forum suggested do one at a time. In addition, you can download the update of MAO while the MAO is running. You must click on CTRL-ALT-DEL, and then click Task Manager. From there, click on Adobe Application Manager and click on end process. Once I did, I was able to update the AAM with no problems. I then ran the update to Photoshop Elements. He got about 13% full and told me that I had to stop organizing Adobe. I did and you click on continue. Have downloaded the update without problem. I was also able to run the update to Adobe Camera Raw Editor 9 without problem. When I downloaded the update for Premiere Elements, it is 13% full before telling me to stop Organizer as well. So I closed the organizer and click on continue. All the updates installed without problem.

  • need help with the error code 150:30

    need help to find out what error code 150:30 is and how to fix it

    See the following topics:

    Error 150:30 - error "Licensing has stopped working". Mac OS:

    http://helpx.Adobe.com/x-productkb/global/error-licensing-stopped-Mac-OS.html

  • Need help with the beep codes, Satellite x 205-SLi1

    Hey guys, a few days ago I tried to turn on my Satellite x 205 SLi1 and I got was 3 beeps, no screen. The first tone is quieter then the next two. What could this be?
    I tried to replace the ram sticks with new and n t work I looked around for answers and I have not seen anything.

    Anyone has any ideas on what could be the problem before I take it a shop?

    I googled for the BIOS error beeps and it seems that the 3 beeps as it means that there may be a problem of graphics. I would like to send the device to an ASP for repair.

  • Need help with the error code 15

    who can help e withthis Setup error

    Exit code: 15

    Please see specific errors below for troubleshooting. For example, ERROR: DW051...

    -------------------------------------- Summary --------------------------------------

    -0 fatal Error (s), 2 error (s)

    ERROR: DW051: {A4ED5E53-7AA0-11E1-BF04-B2D4D4A5360E}

    : Error Media DB: 12

    -------------------------------------------------------------------------------------

    [Branched out to new discussion... Please start your own discussion for a different error...] MOD]

    Hi Johnnoyt12,

    In addition to what John suggested also see link below:

    Installation and launch log errors | Adobe Creative Suite 6, Adobe Creative Suite 5.5, Adobe Creative Suite 5

  • Need help with the launching track pack for forza code 4

    Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.

    This is the help I get when the cat to an Ambassador xbox on xbox.com

    Terry wrote:
    Need help with the launching track pack for forza code 4
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
    The Xbox Ambassador says:
    Hello
    Terry wrote:
    Hello
    The Xbox Ambassador says:
    Hey
    Terry wrote:
    just to be on the phone to xbox live support and was told to come here
    The Xbox Ambassador says:
    ok\
    The Xbox Ambassador says:
    What is your problem?
    Terry wrote:
    I bought the 4 for forza ansd 360 new sealed Christmas...
    Terry wrote:
    has got 2 codes that accompanies the game but the pack track code does not work
    The Xbox Ambassador says:
    Wow good
    Terry wrote:
    whenever I put in the code it says code redeemed
    The Xbox Ambassador says:
    I think the code is used. You must return to the retailer
    Terry wrote:
    I tried to, but since I already opened the case they will not accept
    The Xbox Ambassador says:
    Oh. No,
    Terry wrote:
    the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
    The Xbox Ambassador says:
    Maybe it was auto bought?
    Terry wrote:
    so, how do I get another code generated track Pack if defective?
    The Xbox Ambassador says:
    I do not know.
    Terry wrote:
    bought the game new, so I get the track pack
    The Xbox Ambassador says:
    Oh. It's bad.
    The Xbox Ambassador says:
    I think that if you Exchange 1 code it will buy it
    Terry wrote:
    car pack code worked, starter pack did not work
    The Xbox Ambassador says:
    Oh.
    The Xbox Ambassador says:
    It's a bad
    The Xbox Ambassador says:
    BTW you have an evolution of the tests?
    Terry wrote:
    Yes, I want to? but more anxious to get a code object generated for this pack
    The Xbox Ambassador says:
    Hey if I help can u give me this game too?
    Terry wrote:
    ?????????????????
    Terry wrote:
    So is it possible to get a code for that time?
    The Xbox Ambassador says:
    Hey
    The Xbox Ambassador says:
    Yes.
    The Xbox Ambassador says:
    you need to contact them
    The Xbox Ambassador says:
    and tell them that the code is used.
    Terry wrote:
    I was told to come here? where can I go to get the code?

    Hi Terryg76,

    ·         What version of the operating system is installed on the computer?

    I suggest you to contact the game manufacturer for more help and information.

  • Need help with slui message with the Validation Code: 50

    OT: need help with the message 'victim' slui...

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 50
    Code of Validation caching online: 0xc004c4a2
    Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
    Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
    Windows product ID: 00371-702-8613485-06367
    Windows product ID type: 5
    Windows license type: retail
    The Windows OS version: 6.1.7601.2.00010100.1.0.048
    ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Professional
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.150928 - 1507
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 Professional edition
    Description: operating system Windows - Windows (r) 7, retail channel
    Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
    Installation ID: 022214046070387640229264400212325972472065330163335456
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: X7D3P
    License status: Notification
    Reason for the notification: 0xC004F200 (non-genuine).
    Remaining Windows rearm count: 4
    Trust time: 12/01/2016 11:28:57

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: 0xC004C4A2
    Beyond: 0 x 0000000000000000
    Event timestamp: 1:11:2016 12:55
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:

    --> HWID data
    Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID consistent: n/a
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC1425 APIC 060111
    FACP 060111 FACP1425
    HPET 060111 OEMHPET
    MCFG 060111 OEMMCFG
    LASRYVITRAGE OEMB1425 060111
    ASPT 060111 PerfTune
    OEMOSFR OSFR 060111
    SSDT DpgPmm CpuPm

    Hello

    Thanks to everyone who responded to my question.

    Turns out it would not activate the system properties page.

    He did, however, turn on the tool online browser without a

    hitch. Yes, problem solved.

    Jon

  • Clouds (can someone help me with the error code 214?)

    can someone help me with the error code 214?

    Hello

    Reference:--

    Error code 214

    Error in downloading, installing or updating Adobe Creative Cloud applications

  • Need help with the design of database

    Hello!

    I would really appreciate help in the design of my database. I have a client that has one or more provisions of a certain type. These arrangements will have accounts associated with them. A customer has access to a number of accounts (accounts have a guy too) and when the customer has an arrangement, the arrangement will tell what types of accounts are related.

    Some kind of pattern here
    http://S8.PostImage.org/qcoiozcf9/Namnl_s.PNG

    There are business rules to calculate that represents a client has access to (access above). It is basically three queries involving several different tables (you can give accounts, being a parent etc client that allows you to Auditors that you have not really own). One or two of these queries would a NOT IN / NOT EXIST (if you give your account, you won't have access to yourself until you revoke this action). AccountsOnArrangements is a subset of access (indicated by ArrangementType/AccountType-relationship). So A arrangement has all accounts of type 1, 2 and 3 customer B has access.

    My question is, basically, how I should apply access and AccountsOnArrangements.
    I can access in a view, which runs three queries with Union all. I can also use a table that I maintain with the application code. I have experimented a view but the performance doesn't look too good. I might have a materialized for each of the 3 queries that access, or view materialized for the 3 union all, but I wonder how the performance of this one will be. AccountsOnArrangements could also be a view or a table that I will maintain.

    Is it normal to use views or use the code to insert and remove rows from these tables 'close' when a base line is modified?

    Does still make sense? I have a few problems even explain :)

    Published by: KarlTrumstedt on 22-Aug-2012 13:02

    Published by: KarlTrumstedt on 22-Aug-2012 13:02

    Published by: KarlTrumstedt on 22-Aug-2012 13:02

    Published by: KarlTrumstedt on 2012-Aug-22-15:11

    According to the needs described I did according to model

    [Customers]
CustomerId PK
ParentId FK to Customer.CustomerId

[Accounts]
AccointId PK
CustomerId FK to Customer.CustomerId /*Owner*/
AccountType
(CustomerId,AccountType) UK

[AccountsAccess]
AccointId FK to Accoints.AccointId
CustomerId FK to Customer.CustomerId

[Arrangements]
ArrangementId
CustomerId
AccountType
(CustomerId,AccountType) FK to Account.(CustomerId,AccountType)

    In AccountsAccess will be stored CustomerId, AccountId pairs that tell the CustomerId has access to AccountId. For the entirely given accounts, there is no line for the CustomerId of the owner.

    Frequently asked questions are representing a client has access to?

    I create a SQL-based hierarchical display (because of the children of the customer, grandchildren...)
    and AccountsAccess

    Exactly what accounts is an arrangement linked with?

    a view based on the join of the Arrangements and accounts on (CustomerId, AccountType)

    Who has access to an account

    a SQL-based hierarchical display (because of parents of the customer, grandparents...)
    and AccountsAccess

    and who owns it?

    a view based on the join of customers and accounts

  • KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

    KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

    Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

    Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

    Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

    1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

    2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

    3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

    4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

    5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

    How will I know if my computer is up to date?
    http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for