help with the menu button and the film load

Similar Questions

• Amateur needs help with the film grain effect

  Hey all,.
  Make a third year project design a level of a game that aims to reflect a film noir 1940 (essentially). I was wondering could someone give me an idea on how I would apply a superposition of film grain effect to the camera, to give the impression of noises or his old age (if necessary). Pretty stuck with this and any help or idea would be amazing. Thank you. The grain of the film obviously cannot be a static transparency on top. See you soon.

  The only way is by exchanging an ovelay 32-bit textures (with alpha) but in
  great frostrum case it can be quite slow...

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• I made a new music video for a song, and the music is not in time with the film, how I put in time?

  I made a new music video for a song, and the music is not in time with the film, how I put in time?
  Oh and I'm using WIndows Movie Maker. One.

  Please repost in Windows Live Solution Center.
  Forum on Windows Live Movie maker:
  http://windowslivehelp.com/forums.aspx?ProductID=5

• Helps with the rv180w and the Shrew soft vpn

  Hi, I'm trying to establish a vpn connection by using soft shrew for the cisco rv180w router.

  I watch and read everything I could find, but the connection drops during the opening of the tunnel.

  There were a few tuttorial here in the forum, but the links are down.

  I want Edifier is to establish communication and to be able to access my domain on the network.

  Any help with the settings would be greatly apeciated. I am new to vpn.

  Thanks in advance.

  Federico,

  Try to access the following link. It has good instructions for a similar model. The main difference is that the SA500 has double-WAN and the RV180W does not work.

  https://supportforums.Cisco.com/docs/doc-9378#comment-7216

  Here's another tutorial for the RVS4000 that can help:

  https://supportforums.Cisco.com/docs/doc-18443

  Check out the last post in the following thread, which received instructions for the RV220W (should be exactly the same as RV180W)

  https://supportforums.Cisco.com/message/4165652#4165652

  -Marty

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• I need help with the control of two .swf in third.

  Hi, thanks for reading!
  
  I need help with the control of two .swf in third.
  
  I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
  
  The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
  
  What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
  
  I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
  
  var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
  var mcLoader:MovieClipLoader = new MovieClipLoader();
  mcLoader.addListener (this);
  mcLoader.loadClip ("MCIC.swf", container);
  
  function onLoadInit(mc:MovieClip) {}
  mc.gotoAndPlay (14);
  }
  
  But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
  
  Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
  
  http://www.axiscc.com/temp/HCIC.zip
  
  What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
  
  I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
  
  ActionScripting is far from my point hard, so I'm definitely over my head here.
  
  Thanks for your help.

  Got my solution on another forum.

  http://www.ActionScript.org/forums/showthread.php3?t=146827

• help with the beats on my envy 17-3270nr, n key

  help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

  Hello

  Download and install the following.

  HP OSD utility.

  Proximity sensor driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Help with the Powershell script to collect logs from all domain controllers

  I am writing a script to retrieve the last 5 days of application, security and log files from all domain controllers. The script runs, but fire the logs from the local server only. The variable $Computer has all of my DC so it's the fine mark. I guess it's a problem with my line ForEach-Object, but is not error. See the below script.

  $log = 'application '.
  $date = get-date-format MM-DD-YYYY
  $now = get-date
  $subtractDays = new-object System.TimeSpan 5,0,0,0,0
  $then = $Now.Subtract ($subtractDays)
  $Computers = get-ADDomainController-filter *.
  ForEach-Object - InputObject $Computers - process {Get-EventLog - LogName $log - after $then - before $now - EntryType error | select EventID, MachineName, Message, Source, TimeGenerated |} ConvertTo-html | {Out-file $env:TEMP\Applicationlog.htm}
  Invoke-Expression $env:TEMP\Applicationlog.htm

  Thank you

  Rich

  Hello

  To help with the repost the question script to the script Center Forum

  http://social.technet.Microsoft.com/forums/scriptcenter/en-us/home

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Help with the part number - paw index screen X230ti

  Can anyone help with the reference number and or the availability of the small 'legs' that sit in the slots on each side of the keyboard on a X230ti? They locate into the slots with the screen and prevent movement when the lid is closed.

  I have the same and among the small beasts broke and the screen tends to rotate when closed.

  Have searched for a parts list but cannot find the "paw" in any list that I found. Thank you

  Here is a picture of the X230t keyboard (and palmrest) framework. You can see the small 'legs' to belong to him.

  I hope someone from Lenovo will tell you how to order this part. EDIT: part number 04W6808.