Help with the Script checkbox

Similar Questions

• Can someone help with the scripts on this file?

  Hi, I hope someone with a bigger brain can help me here.

  I have an existing Flash CS3 file that makes up the result to http://www.infusion-set.com/Flash/eLearning/Inset30/inset30_eguide.html .

  The customer asked if I could add an extra tab at the top after that 'group' called 'Contact us' with link to an additional page. The design was done in ActionScript 2 with references to XML files for dynamic content because it has been done in other languages.

  I modified the XML file with the correct references to a new page and a .swf file that accompanies it to play in the field of animation.

  I tried a .fla version where I duplicated one of the existing tabs script, changed the XML references and changed the variables if necessary to "con or"Con"(which is to reach us). Unfortunately, he made the menu tab go completely off the page and was patently false in some way.

  Can someone give me a clue as to what to change here on the original file that I am a novice with ActionScripts, so ask me.

  For reference, I have attached the HTML files with scripts of original file and my incorrect version. The chronology is 103 images with the scripts placed in frame 1 and 102

  Thank you.

  Garry

  The buttons are all created using the same library object (but MC), except for the code you have in the revised file does not call on it for the con button.

  You calling on something with a name of 'con' link, which tells me that a quick check is not - then it is undefined in the code when you try to use it.  I found this by using trace (newConBut._x); After its _x value was assigned, as I said, you should try.   So the first thing you want to do is to change the following line from...

  var newConBut = _root.attachMovie ("con", "conbut", _root.getNextHighestDepth ());

  TO

  var newConBut = _root.attachMovie ("but", "conbut", _root.getNextHighestDepth ());

  so that it uses the but MC who is used to this end in the library.  So, you want to correct the assignment _x of the buttons and I think that you had previously...

  newConBut._x = 650 - newConBut._width;
  newRecBut._x = newConBut._x - newRecBut._width;

  Here is a picture of what these changes (note, without the XML file, I had to finagle things just to work, then the labels of biutton are not what they will be)...

  

• Help with the scripts of "event handler".

  Ok. I am new to using event handler and the Listener Script for I have not every little thing down yet.

  What I'm trying to do is set up an event handler to activate a script when I select a layer. As I have now, the active script no matter what I choose and I'm unable to limit it to only activate when I select a layer. The ScriptListener output was:

  var idslct = charIDToTypeID ("TPCV");
  var desc10 = new ActionDescriptor();
  var idnull = charIDToTypeID ("null");
  ref19 var = new ActionReference();
  var idLyr = charIDToTypeID ("Lyr");
  ref19.putName (idLyr, 'Face');
  desc10.putReference (idnull, ref19);
  var idMkVs = charIDToTypeID ("MKV");
  desc10.putBoolean (idMkVs, false);
  executeAction (idslct, desc10, DialogModes.NO);

  I used TPCV under the name of the event during the creation of the new event in the event handler. However, this same ID is used when a tool is selected. This isn't a huge problem, but for the fact that my reason for setting this up is so that when I select a layer, first I want to implement a predefined specific tool to use on it. If I can change the tools (select another tool) and have always the same layer selected in the script automatically selects the initial tool to the layer which is always selected this layer is always the active layer.

  Example: Suppose I have the following layers...

  Texture

  Heal

  Tones

  Eyes

  Lips

  Face

  These are not my normal layers, but for example when I select the layer "Cure" I would like to start with the Healing Brush tool. However, sometimes I want to use clone on this layer as well. Using the event at this time, Heal would still be the active layer when I make the choice to the clone tool so the script would then return the selected tool, Healing Brush tool.

  So, is it possible to limit the selection event ID to activate only when a layer is selected? I noticed that the line above in bold/red is the event ID of layer. I don't know how to do this in the event handler or the script.

  Thanks for any help.

  Mike

  Here ya go...

  //
  // SelectLayerHandler.jsx
  //
  
  function _selectLayerHandler(desc) {
    // do whatever when a layer is selected
    var doc = app.activeDocument;
    var layer = doc.activeLayer;
    alert("Layer " + layer.name + " selected");
  };
  
  cTID = function(s) { return app.charIDToTypeID(s); };
  sTID = function(s) { return app.stringIDToTypeID(s); };
  
  try {
    if (arguments.length >= 2) {
      var desc = arguments[0];
      var event = arguments[1];
      if (event == cTID('slct')) {
        var ref = desc.getReference(cTID('null'));
        var cls = ref.getDesiredClass();
        if (cls == cTID('Lyr ')) {
          _selectLayerHandler(desc);
        }
      }
    }
  } catch (e) {
    alert( "Error: " + e + ":" + e.line );
  }
  
  "SelectLayerHandler.jsx";
  // EOF
  

• Need help with the Script to remove the option data download of a page

  Hi all
  
  I have a requirement where in I need to delete download option given specifically to a page for a particular set of reports. I wrote a java script...
  
  < script type = "text/javascript" >
  function RemoveOption()
  {
  TDS var = document.getElementsByTagName ('a');
  for (td var = 0; td < tds.length; td ++)
  {
  If (tds [td] .className! = "NQWMenuItem")
  {
  continue;
  }
  var tHTML is tds [td] .innerHTML;.
  tHTML = tHTML.replace ("download data","" ");
  TDS [td] .innerHTML = tHTML;
  }
  }
  Window.OnLoad = RemoveOption;
  < /script >
  
  that works very well up to a point every time IE it deletes a page load. but in case I have a view selector in a report or on a table whn I click the next Recordset it only gives me the desired result.
  
  Then...
  
  I was hoping that if someone has a better way to do it... If so can you please share it...
  
  
  Thanks in advance...
  
  Published by: Ashu M 25 May 2010 13:28

  Try to use the event window.onFocus instead.

  What about John
  http://obiee101.blogspot.com/

• lately and I don't know why I see a pop up of a problem with the script. can some1 help me?

  There is a pop up of a problem with the script. He asked end and contuniue the script. I didn't have this problem before. Please help me this is getting really annoying. He asks a lot

  I changed a theme and almost never have a problem again...

• Help with the Powershell script to collect logs from all domain controllers

  I am writing a script to retrieve the last 5 days of application, security and log files from all domain controllers. The script runs, but fire the logs from the local server only. The variable $Computer has all of my DC so it's the fine mark. I guess it's a problem with my line ForEach-Object, but is not error. See the below script.

  $log = 'application '.
  $date = get-date-format MM-DD-YYYY
  $now = get-date
  $subtractDays = new-object System.TimeSpan 5,0,0,0,0
  $then = $Now.Subtract ($subtractDays)
  $Computers = get-ADDomainController-filter *.
  ForEach-Object - InputObject $Computers - process {Get-EventLog - LogName $log - after $then - before $now - EntryType error | select EventID, MachineName, Message, Source, TimeGenerated |} ConvertTo-html | {Out-file $env:TEMP\Applicationlog.htm}
  Invoke-Expression $env:TEMP\Applicationlog.htm

  Thank you

  Rich

  Hello

  To help with the repost the question script to the script Center Forum

  http://social.technet.Microsoft.com/forums/scriptcenter/en-us/home

• Need help with a script (o - o8) *, see the Virgin if there is no

  Hi all what I need help with a script I can't find an example.

  I'm trying to subtract 2 numbers and then multiply this product. (o o8) * one but I just want to do the calculations if all fields have the numbers IE field o, o8 of field and field one.

  Thank you in advance. I was stuck on this days searching the Internet.

  Assuming you want to affect the outcome of this calculation in another text field, use this code as a custom field calculation script:

  var o = this.getField("o").valueAsString;
  var o8 = this.getField("o8").valueAsString;
  var a = this.getField("a").valueAsString;
  if (o!="" && o8!="" && a!="") event.value = (Number(o)-Number(o8))*Number(a);
  else event.value = "";
  

• Having a problem with the script error message

  The error message and web page script error every move I make now. I tried to check and uncheck boxes tab in advance internet options. I also ran a check of the system that did not help either. Any suggestions? Thank you

  Hi Mic,

  From the description, it seems that you have a problem with the script error message in Internet Explorer.

  To better understand the question, please answer the following questions:

  1. is specific to a particular Web site question?

  2 have you made changes on the computer before this problem?

  3. What is the exact full error message and web page of script error message?

  4. When you get exactly the script error message and web page error message appears?

  5. what exactly you're talking about when you say "system check"?

  See the article mentioned:

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

• Need help with the API Explorer

  Hi all

  I am creating a workflow to automate certain tasks of P2V and I want to disconnect the NETWORK adapter prior to anyting on virtual machines. When everything is done, I want reconnect you this NIC I play with vCO for a few months now and I need to get help with the part of the script. I always managed to find a code but this time I did not find anything!

  So I need to script this part! I think I found a way to change the connection settings of the VMXNET3 NETWORK adapter with this part of the code:

  System.getModule("com.vmware.library.vc.vm.spec.config.device").getVirtualVmxnet3(backing,connectable,controllerKey,deviceInfo,key,unitNumber,addressType,macAddress,wakeOnLanEnabled)
  var connectset = new VcVirtualDeviceConnectInfo();
  connectset.connected = false;
  connectset.startConnected = false;
  

  Now, I need to find the way to set these parameters to a VM VMXNET3 adapter?

  How to off the virtual machine to these settings?

  Thanks for your help!

  If you are connected to a distributed switch, they canned for this com.vmware.library.vc.networking.connectVmNicNumberToVirtualDistributedPortgroup action.  If this isn't a vds connect you to, then you need to change then it will have to be slightly modified to use normal NIC instead of vds support.  You will also need to add these lines to the device configuration section:

  devicespec. Device.connectable = new VcVirtualDeviceConnectInfo();

  devicespec. Device.connectable.Connected = true;

  devicespec.device.connectable.startConnected = true;

  I copied this action and added these 3 lines to achieve what it looks like you are trying to do.  We don't really use standard switches in our environment.

  Paul

• help with resizing script

  I found an online script that turns pictures into a square (by increasing the size of the canvas on the short side to match the length of the long side) which is awesome, but I would like to make an extra step and I have no experience with script so I hope someone can help.

  now that my images are square, I want to put a maximum of 2500 x 2500 px size, I found scripts to set a resolution of a specific size, but I want to make sure to avoid is upsampling, so I want just any image is greater than 2500 x 2500 px down sample to 2500 x 2500 px

  all information on the code for this would be much appreciated.

  When I'm at the machine with the script that I currently use will be to paste it here in the meantime if you know something about the scaling of the images down, but preventing their intensification I could probably chimpanzee with the code I have and make it work.

  Something like this might work, you can change the ResampleMethod, however:

  top-down images of squares more 2500px up to 2500px.

  2012, use it at your own risk.

  #target photoshop

  If (app.documents.length > 0) {}

  myDocument = app.activeDocument;

  value of pixels;

  var originalRulerUnits = app.preferences.rulerUnits;

  app.preferences.rulerUnits = Units.PIXELS;

  get the dimensions;

  var theWidth = myDocument.width;

  var theHeight = myDocument.height;

  If (theWidth == theHeight) {}

  If {(theWidth > 2500)

  myDocument.resizeImage (2500, 2500, myDocument.resolution, ResampleMethod.BICUBICSHARPER)

  };

  }

  else {alert ('not square')};

  reset;

  app.preferences.rulerUnits = originalRulerUnits;

  };

• I need help with the control of two .swf in third.

  Hi, thanks for reading!
  
  I need help with the control of two .swf in third.
  
  I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
  
  The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
  
  What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
  
  I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
  
  var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
  var mcLoader:MovieClipLoader = new MovieClipLoader();
  mcLoader.addListener (this);
  mcLoader.loadClip ("MCIC.swf", container);
  
  function onLoadInit(mc:MovieClip) {}
  mc.gotoAndPlay (14);
  }
  
  But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
  
  Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
  
  http://www.axiscc.com/temp/HCIC.zip
  
  What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
  
  I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
  
  ActionScripting is far from my point hard, so I'm definitely over my head here.
  
  Thanks for your help.

  Got my solution on another forum.

  http://www.ActionScript.org/forums/showthread.php3?t=146827

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• help with the beats on my envy 17-3270nr, n key

  help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

  Hello

  Download and install the following.

  HP OSD utility.

  Proximity sensor driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update