photos not in the same place on LR and in the computer library, help!

Similar Questions

• Memory micro SD card works on phone, but not on the computer, Please HELP!

  Help, please

  History
  (1) I got a 8 GB Micro SD memory card, it worked fine for two years and then became corrupted, I formatted and it worked fine for about two months before, she has become corrupt again
  (2) this time when it became corrupt my phone always accepted, but the computer could not detect, weird, I decided to not format and continue to use on my phone
  (3) I decided to buy a new memory card and an adapter and then transfer the stuff over the old to the new, but I was shocked when the NEW memory card and a NEW adapter did not work and continued to say needs formatting, hmmm...
  (4) I decided to format it, but it says that it cannot be formatted... WHAT!
  (5) I put the new card in my phone, it works and I have format it on my phone instead... IT STILL DOES not work! Help me!!!

  I still think you should get a new card reader.  The adapters are not likely to be the problem.  On the other hand, I had a player go bad and yet still be "recognized" by the computer.

  It is possible, but probably not - IMO that reinstall the driver (if available; in general, however, these devices use drivers that come built-in to Windows) or a firmware update (if available for your drive in particular) could solve the problem.  What is the brand and model of your card reader?

  At the very least, you should see if you can find someone with a SDHC card reader and then see if you can read and format the card using your cards.

• Windows95 CD-ROM - game Need for DCC Speed-No. pieces found - can not install the game - please help. ___

  Windows 95 CD-CD-ROM-game Need for DCC Speed-No. pieces found - can not install the game - please help.

  ------------------

• LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  Name of the operating system Microsoft Windows 7 Home Premium

  Version 6.1.7601 Service Pack 1 Build 7601

  Manufacturer of operating system Microsoft Corporation

  System name HANDSOME-PC

  System manufacturer LG Electronics

  System model C500.-g. AEE5GE1

  System Type X 86-based PC

  Processor Intel (r) Core i3 CPU M 390 @ 2.67 GHz, 2666 Mhz, 2 Lossnay, 4 logical processors

  H46YSF00 Version/Date of BIOS American Megatrends Inc., July 2, 10

  Product key:

  X 16-96084

  CONCERNING

  TUESDAY BIOJY

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• A VCR tape was copied on a DVD. Play on TV, but not on the computer. Can it be fixed?

  A VCR tape was copied on a DVD.   Plays on TV but not on the computer.   This problem can be corrected?

  A VCR tape was copied on a DVD.   Plays on TV but not on the computer.   This problem can be corrected?

  ==============================================
  Can successfully play you commercial DVDs on this computer?

  IF you go to... Start / computer... and left click of the drive letter
  the DVD player is he will play?

  Media Player freeware at the following address may be worth a try... it will be
  play anything:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

• My work as a Photoshop Mix does NOT have the Adobe library.  I have already sent more than 100 things at the library (successfully!)  It has now stopped working.  Photoshop Mix not send.  If I delete the Photoshop Mix of iPad Pro.  It will remove a

  My work as a Photoshop Mix does NOT have the Adobe library.  I have already sent more than 100 things at the library (successfully!)  It has now stopped working.  Photoshop Mix not send.  If I delete the Photoshop Mix of iPad Pro.  It deletes all the pictures in Photoshop Mix?  I had technical support look in my ADOBE Office without success. (case 187698996)  Thank you.  I have several files in the Adobe library and checked all the. Nothing appears from my Photoshop Mix.

  Thank you.

  Susan hers

  Update: Susan fixed this problem by uninstalling and reinstalling the application.

• Hello! I installed Adobe premiere pro and Creative Cloud show that the app is installed, but it is not on the computer. What should do?

  Hello! I installed Adobe premiere pro and Creative Cloud show that the app is installed, but it is not on the computer. What should do?

  You have a 64 bit system? If this isn't the case, it will not work.

• I downloaded the demo of Photoshop elements 13 and saw some instructions when downloading but now cannot find them and I do not think that have completed the installation as it is not on the computer.

  I downloaded the demo of Photoshop elements 13 and saw some instructions when downloading but now cannot find them and I do not think that have completed the installation as it is not on the computer.  There is a deployment folder that I can click in.  Could this be it?

  Barbara, what version of operating system do you use? / Applications (Mac), you can check and control panel > programs and features (Win) to check if it's installed on your machine.

  Here is the link for products download Photoshop Elements | 10, 11, 12, 13

  I hope this helps.

• Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

  Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

  It looks like "snap to grid of pixels" just once more.

  Uncheck the box "align new objects to the pixel grid" in the menu of the transformation Panel.

  Select the objects and uncheck "snap to grid of pixels" in the transformation Panel.

• Find photos not in the catalog

  Lightroom has a way of search directories for the photos not already in the catalog? I use Lightroom 3.4 and updated my catalog of PSE9. Looking through the folders in the library module I see upcoming pictures like 'new' that PSE MUST have had in them, but obviously did not. I want to these folders to import anything not already in the research library.

  Synchronize the folder (from the context menu of a folder) impeccable.

  Beat

• How to export contacts (not addresses) from 650 to Mac address book?... .get photos out in the computer expansion card?

  I have a lot of contacts in my Treo650. I would like to export these to the address book of my Mac to switch to an iphone. There was no information on Palm contacts right on Palm addresses. Even if I sync my Treo with the pal Office successfully, there are 0 addresses on Palm desktop to export even though I have hundreds of contacts? I don't see a way to convert contacts to Plam desktop addresses. I could not find contacts on Palm desktop. I would appreciate your help. Jpertsch

  How to make pictures out of 1.0 GB and my Mac computer expansion card? Thanks Jpertsch

  Its ask me who found the answer:

  When the Palm Desktop window opens on the computer, in the upper R corner is an option for 'user '. Don't forget to specify yourself as the user! The default user is not automatically you. Once I made a selection of the user all contacts were there in the address section ready to be exported as a vCard to the Office so that I can then import in Mac "address book".

  I called Palm support 1-877-426-3777. Since I had a support Sprint Treo is in a Sprint. To directly call the Sprint: 800-974-2221 I stumbled on the issue of the 'user' waiting to phone support.

  Jpertsch

  Message is about: Treo 650 (Sprint)

• Install Windows 8 on external drive Thunderbolt - Windows could not prepare the computer to begin the next phase of installation

  Hi all

  I'm at my wit's end trying to install windows 8. Let me start at the beginning: I used to have windows running on my Mac Pro ssd internal 8.1, installed via bootcamp. It worked well for a while, and then refused to start, gives me a blue screen KERNEL_SECURITY_CHECK_FAILURE. Despite some advice from lonely T, I was unable to fix and ended up wiping the partition and relocation, again via bootcamp. Yet once again, it worked for a few months, then the same problem. I made this one last time, and it only lasted 2 days... So I gave bootcamp.

  I think that the hybrid MBR partition scheme that implements bootcamp is the culprit, but I don't really have evidence to substantiate this claim. In any case, I tried to install windows in EFI mode. (If I understand correctly, the hybrid MBR is set up to allow windows to install in legacy BIOS mode, but that windows 8 may now install efi, which supports my Mac Pro mode.) My Mac is the new Mac Pro (end of 2013, trash in shape), and I can say short UEFI 2.0 (I have the latest efi update from apple installed).

  The method I'm trying:

  1. create a new partition in HFS + on my external drive using disk utility. The drive has now it's efi partition and partition empty 750Go I want to install windows a 1.25 TB storage partition that I use with my mac. It has a GPT. I formatted HFS + and no FAT, because I think that disk utility creates the same hybrid-MBR as training camp every time a FAT partition is created.

  2. use gdisk to confirm that the disc does not have a hybrid-MBR. (sudo/dev/disk1 gdisk watch MBR: protection)

  3 restart my mac and hold the possibility to put in place to bring up the boot efi menu.

  4. Select the EFI_Boot DVD icon (that's the windows 8 install dvd that I have in my superdrive USB drive)

  5. go in the menus of the disk selection screen installation and delete the partition in HFS +, I created to install windows on (the format option is not available)

  6. now select "Unallocated space" on the good drive and click Next.

  The problem:

  Partitioning seems to go ok (there is no feedback on this basis, but it proceeds to the next screen, and all new partitions expected are there if I check diskutil list later). He said it is "copy of windows files", but then stops with the error "Windows has no prepare the computer to start the next phase of the installation." To install Windows, restart the installation. "If I restart, I can start the same process all over again and get the same result.

  The Question:

  How I get this error and get windows install?

  Extra pieces:

  • The first time it happened I assumed it was the new sip / thing "without roots" in El Capitan, causing problems, then I disabled, but I still get the same error.
  • After reviewing the diskutil list output after one of installs it without success, I found that a labeled EFI partition has been created after my storage partition (the original efi partition was still there in the upper part of the disc).
  • I have windows 8.1 installed now bootcamp on my internal ssd. It was planned to use it and winToUSB to put windows on my crush, but I found that it only works with usb2. I do not have installed could cause problems with the installation on another disk.
  • Before say you I can't run windows on an external, yes you can, and many people have. I read windows sees thunderbolt internal disks.
  • I read a few other posts on this and other sites on this problem, but could not find a pertitnant solution to my situation. I found one that suggested to remove the efi on my disk partition, but that seemed like a bad idea, so I didn't try.
  • I write this at 1 in the morning after a day spent in front of the computer trying to get this working, so please excuse typos typing or other. I am pleased to provide you with any pertinant information helping you will help me.
  • Thank you!

  The other thing I tried also almost succeeded:

  Although I prefer to get the method above works, because it seems the most promising, is something else, I've tried that I thought worth mentioning. If you offer advice pertaining to this method rather than the above, I would appreciate it if you could explicitly declare that at the top of your answer. Thank you.
  

  I tried to install windows on the physical disk using vmware and virtual box. The instrutctions I followed for this can be found here: http://www.andrewsavory.com/blog/2011/2156 (the only thing different, it's because it's on an external drive, I created the Fat 32 partition manually using disk utility). The first time (using vmware) installation seems to go off without a hitch, but I couldn't get my computer to see the windows partition as bootable with the boot efi menu hold-option regular refined or with system preferences-> startup disk. I think that I was using always inadvertently a hybrid-MBR at this stage. I tried to repeat this new beginning with the first two steps above to avoid the hybrid-MBR. But now when I try to create the virtual machine based on the gross vmdk, it starts to copy the files then says not sufficient permissions and fails. I don't know if it's a permission with the disk or the hard problem. I tried chmod 777 and chown $USER of the vmdk disk (/ dev/disk1s3) does not.

  Wow, that was a long post...

  1. when a second drive is detected by the Windows Setup program, he wants to create his own brand of EFI (104 MB) and not to mess with the Mac EFI (200 MB). You can force it to use the EFI to the Mac using Diskpart commands.

  2 instead of HFS/FAT32, create a piece of 750 GB free space and it should only get a new MSR/MSD, without the part of EFI.

  3. on your VM method, the link you have is quite old. You have a MP 2013, with references to the 2010 Mac alumni and is a bit too archaic to be useful. http://forums.macrumors.com/threads/install-a-Windows-7-partition-on-Mac-OSX-Wit hout-optical-car-or - usb.1836959 / #post... seems to work for many and can be useful for a test. It also uses Winclone.

  4. you can also try http://bleeptobleep.blogspot.com/2013/02/mac-install-windows-7-or-8-on-external. html .

• imported files, but now are not not in the LR library

  I think that there is another aspect of different threads, but I can't find a specific answer.  My apologies if this is a matter of repeating.

  (Windows 10 6 Lightroom under the aegis of the CC, the pictures stored on an external drive, LR catalog on disk C).

  A single folder, which contains 44 photos, now appear only as 1 image in LR library.  If I go into the folder that contains 44 photos on the external hard drive to a re - import ('all images' search), 43 are gray gray, who I am able to see in the library's grey dark grey.  Needles to say, I can not re - import one of these images of gray.  This suggests that LR already has them cataloged somewhere.  However, when I search for them in the LR catalog, covering all of the records, they do not show.  I have tried this on both internal and external drives.  If on the one hand, LR seems to say "I already have them", but however he can not find them anywhere.  I also tried a search of Windows files for one of the specific images, and the only place where that might be present, not surprisingly, was to its rightful place on the external hard drive.

  My other files work fine, I have not moved the folder in question, it worked perfectly for a couple of days.  I tried to remove the file and re-import it, but LR "discovered" again as a picture on the 44.

  At a loss as to what to do next.  Should I restore an earlier backup catalog and see if that helps?

  This happens because you have probably (accidentally) imported photos using the COPY option instead of the Add option.

  The pictures are already in Lightroom. Import again is never a good idea and will usually cause significant disadvantages. You must use the Lightroom search tools to find photos in Lightroom, and then you will be able to modify or to do something else in Lightroom with these photos.

  Here's how the search.

  1. From your operating system, to determine the exact name of the file of one of these photos
  2. In Lightroom, on the left, click on all the pictures (its under the word 'Catalogue')
  3. In Lightroom, disable all filters (once or twice Ctrl-L)
  4. In Lightroom, use the view-> sort menu command-> file name, which puts all your photos in alphabetical order by file name
  5. In Lightroom, scroll upwards or downwards in the grid until you find what a file by file name in alphabetical order
  6. In Lightroom, right click on the picture, select view in the browser, and then you will know which folder Lightroom think that the photo is in

• Only a few photos appear on the computer downloading cameras

  I have an iMac 2009 with an Intel Core 2 Duo 3.06 GHZ and 4 GB of memory.  I went to Mt. Lion El Capitan (it took 26 hours) and in a first time had trouble even finding my 20 000 photos.  A call to Apple support found hidden away but now when I try to upload pictures from my Canon 70 d and G7X only some pictures appear on the computer and the rest of the screen shows the contours of the boxes.  When I try to download even these pictures the computer says that they are trying to download, but they are not.  Any help would be appreciated because I don't have much computer knowledge (63 years old and still learning!).  If I need of more memory and my poor old computer just can't handle more pictures?

  How do you try to download the images from the cameras.

• How a repair tech to display error log when it is not on the computer

  I got our office for repairs because it crashed constantly and gel to the top.  The technician who brought back the computer said that there is nothing wrong just a few things that it has fixed.  Not 10 minutes after that he did to the left of the computer freeze and our screen is blurred.  When I called him to inform him, he said he went in my error log and he could see that there was a problem.  It's that he can see what I'm doing?  Better yet, what can I do to eliminate looking at him in front of my computer.

  You can disable remote assistance by will start--->Panel---> System---> using Remote taband uncheck the allow invitations to support remotely to send from your computer. I suspect that when you took it, he put the system in place for handling remote.

  You can also remove remote assistance exception in your firewall.