Help with "user agent detection" - redirect to the alternative page only if you are using Safari?

Similar Questions

• Windows Media Player error"the version of this file is not compatible with the version of Windows that you are using"

  Original title: need help with Windows Media Player.

  Whenever I try to start Windows Media Player, in my laptop, I get this message... "the version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I use Windows 7 (Ultimate) 64-bit. I tried to download WMP 64 bit, but could not download. I have evven I tried microsoft solve this problem, but in vain.

  Please, someone help me out here, with WMP.

  Thank you, in advance.

  This procedure has helped most users facing this problem.

  1. Reboot your system.
  2. Open cmd.exe as an administrator by selecting Start Programs/Accessories.
  3. Right-click on command prompt and choose Run as administrator.
  4. Type in
     Unregmp2.exe /UpdateWMPVersion
  5. Press ENTER.

• When installing CD collection national geographic Gets the error, "the version of this file is not compatible with the version of Windows that you are using".

  Original title: the version of this file is not compatible with the version of Windows you are using. Check your computer system information to see if you need a X 86 (32-bit) or X 64 (64-bit) version of the program, and then contact the software publisher.

  I have a large CD collection published by National Geographic. The difficulty lies in the installation of the program that displays the pages. Setup of the program ends. ins.  These Photo CD were produced by mindscape. When you try to contact them, they are based in France, and it is impossible to get support for this product. Is it possible to get the installer on the CD to do its job to provide a way to turn the 'pages '?

  Hello malaglinskom,

  In addition to what Azam offered, you may try the following:

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Hope this information helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error message: "the version of this file is not compatible with the version of Windows that you are using", when you try to run an old ms - based back program in Win-7 Ultimate 64 bit.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.

  "The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)

  Hi Bcopeland,

  Thanks for posting your question in the Microsoft Community.

  Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  You can check the compatibility of the program with Windows 7, in the Compatibility Center.

  Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  a. click right on the program.

  b. click Properties.

  c. click on the tab compatibility.

  d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.

  Here is an article that gives you more information on this:

  Make older programs in this version of Windows

  If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.

  Hope the helps of information.

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

• Need help with styles of different links on the same page

  Hello

  I use Dreamweaver CS4 on a PC.

  I searched through a large number of posts during the last two days, I tried the tutorial projectseven.com, google would, etc., but still may not know...

  All I want to do is apply a different link color to some links at the bottom of my page. Elsewhere on the site, I put the color blue (for the link) and orange (for the hover)-for footer links, I want the link to be white and the hover to stay orange color.

  The problem with the projectseven tutorial is that it seems not to apply to the CS4 and I kept getting error messages when you try to apply a new CSS rule - there is no class. Tag | Advanced according to the instructions...

  I copied the code to my page for this. The links I want to apply a different style to are contained in the DIV called "Footer-Navigation-Bar.

  Could someone please give me some instructions or point me in the right direction please?

  Thank you very much

  Vickie

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  <!-saved from url = (0014) subject: internet->
  "< html xmlns ="http://www.w3.org/1999/xhtml">".
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  <!-TemplateBeginEditable name = "doctitle"-->
  the < title > Australia subscribe to the family - it's free! < /title >
  <! - TemplateEndEditable - >
  "" < link href = "... / family - subscribe.css" rel = "stylesheet" type = "text/css" / >
  "" < script src = "... / SpryAssets/SpryMenuBar.js" type = "text/javascript" > < / script >
  "" < link href = "... / SpryAssets/SpryMenuBarHorizontal.css" rel = "stylesheet" type = "text/css" / >
  <!-TemplateBeginEditable name = "head"->
  <! - TemplateEndEditable - >
  < style type = "text/css" >
  <!--
  a: link {}
  color: # 30;
  text-decoration: none;
  }
  a: hover {}
  color: #F30;
  text-decoration: none;
  }
  a: visited {}
  text-decoration: none;
  }
  a: active {}
  text-decoration: none;
  }
  ->
  < / style > < / head >

  < body >
  < div id = "container" >
  < div id = "banner" >
  < ul id = "family-subscribe-menu" class = "MenuBarHorizontal" >
  "< li > < a href ="... / index.html "> home < /a > < /li >"
  "< li > < a href ="... / subscribe.html "> Subscribe < /a > < /li >"
  "" < li > < a href = "... / family - advertise.html" > announced < /a > < /li >
  "" < li > < a href = "... / family - articles.html" > items < /a > < /li >
  "" < li > < a href = "... / family-sign - in .html" > questions < /a > < /li >
  "" < li > < a href = "... / family - contribute.html" > Contribute < /a > < /li >
  "" < li > < a href = "... / family - contact.html" > Contact < /a > < /li >
  < /ul >
  < / div >
  "" "" < div id = "sidebar" > < a href = "... / family-sign - in .html" > < img src = "... /images/Launch-issue.jpg" alt = "number of launch" width = "220" height = "380" hspace = "4" / > < / has >
  < div id = "sidebar-image2" >
  "" < p > < img src = "... / pictures/sleeping bag for Web.jpg" width = "220" height = "151" alt = "sleeping bag" / > < / p >
  < p > Kozy Koala™ Sleeper pillow is ideal for summer nights when children want to sleep or when go you camping. The camper all-in-one pillow is composed of... [MORE] < /p >
  < / div >
  < div id = "sidebar-image3" >
  "" < p > < img src = "... / pictures/solrx for Web.jpg" width = "220" height = "164" alt = "sunscreen" / > < / p >
  SolRX® solar filters are very sweaty and resistant to the water-ideal for anyone who leads a life active outdoor... whether you are in the water or not! [MORE] < / div >
  < / div >
  <!-TemplateBeginEditable name = "content-area"->
  < div id = "main content" > main content < / div >
  <! - TemplateEndEditable - >
  < div id = "footer" >
  "" < div id = "page-navigation-bar foot" > < a href = "... / family - about.html ' > on < /a > | "" < a href = "... / family - advertise.html" > announced < /a > | "" < a href = "... / family - contribute.html" > help < /a > | "" < a href = "... / family - contact.html" > contact < /a > | "" < a href = "... / family - unsubscribe.html" > unsubscribe < /a > < / div >
  < div id = "foot of page-text" > Family Australia | ABN 33150685385 | "For all advertising inquiries, please contact < a href ="mailto:[email protected] "> [email protected] < /a > < br / >"

  Copyright © 2010 family Australia. All rights reserved.
  < / div >
  < / div >
  < / div >
  < / div >
  < script type = "text/javascript" >
  <!--
  var MenuBar1 = new Spry.Widget.MenuBar ("family-subscribe-menu", {imgDown: "SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});})
  ->
  < /script >
  < / body >
  < / html >

  The links I want to apply a different style to are contained in the DIV called "Footer-Navigation-Bar.
  ......
  ......
  a: link {}

  color: # 30;
  text-decoration: none;
  }
  a: hover {}
  color: #F30;
  text-decoration: none;
  }
  a: visited {}
  text-decoration: none;
  }
  a: active {}
  text-decoration: none;
  }

  Hello

  You can see the CSS that applies to your links above.  If you have links you want to style in a different way, just write the rule as follows:

  #Footer - Navigation - Bar has: link {}

  color: Red;

  text-decoration: none;

  }

  Or whatever.  There are other ways, but this will make you as you already have these links you want to style differently in a div with its own code.  The new rule comes after other rules in your CSS I think that to make sure of the cascade, well thinking about, there is something called specificity in the CSS, which means that the rule I suggest will win anyway.  Everything you do in my suggestion is to select one: a link that is a descendant of an element with particular ID.

  I hope this helps.  I am a novice and might have gotten a little fuzzy with the waterfall/specficity but good, I think you get where you want to go...

  Martin.

• You are using Safari on the mode not supported on the iPad with R17

  I have a customer who just bought for their sales of the iPad, and they try to use the 'Safari' or 'private' in a mode not supported. They have transformed the center of messages, but when they try and login after clicking on the message of no browser supported that they receive the following error message:
  
  Occam, update browser Servlet: Eception exception: and eception exception occurred while trying to render the page. Please try again later or contact customer service for more information.
  
  I know we have customers and sales advisers internal with CRM OD working on the iPad with the message off the power Center. Did anyone see this error when you are trying to connect with the iPad or the iPhone?
  
  Thanks for your help!

  Support of CRM On Demand using Safari on the iPad will be available in R19.

• I hid all the photos of Facebook friends somehow and do not know how to restore them. Only if you are using Firefox - how can I get back them?

  I right click a picture on Facebook, to delete a photo, there was a message from Firefox, I said 'Yes' and all THE photos of friends disappeared, not only that I clicked. I don't know how to restore them. They are obvious when you use another browser is unique to Firefox.

  It is possible that you do not recognize the server that Facebook uses to store images.

  Another way to see what images are blocked is to click on the favicon (Site ID icon) on the left side of the address bar and click the button "additional information".
  
  This will open the Security tab of the window of the Information Page (also accessible via Tools > Page Info).
  
  Go to the Media of this Page Info window tab.
  
  Select the first image and scroll though the list with the arrow pointing downwards.
  
  If a link to the image is gray and there is a check mark in the box of block Images of... just above the area 'Preview Media' can remove this mark to unlock the images from this area.

• Are the available PCI drivers if you are using the recovery/Application for an AMD Compaq5610F 64 x 2 driver

  Boots motorcycle only in safe mode without network and new

  printer driver installation fails.  Grand? mark in

  For other devices such as Device Manager:

  Other PCI bridge device

  PCI device

  PCI Simple Communication controller

  SM Bus controller

  Video controller (VGA compatible)

  I'll be able to find and reinstall these

  drivers missing using the Application or driver

  Recovery program?

  If your machine does not start with the hard drive, and I guess no recognition in the BIOS, it's about confirmation that the drive is dead. Not a good way to start the weekend - but for about $60, it can replace the hard drive and order the recovery media to reinstall the OS.

  BTW, have you checked to make sure she didn't burn an OS Recovery DVD set & ranger? She would have gotten a pop-up reminder to do that when the machine was the first installation. Wouldn't be the first time someone put it away and forgot to push.

• Why can't I click on some parts of my screen only if you are using firefox. I can not use the upper part of my scroll bar, but can use the background. I cannot click on the top of all sites, but he can click on any part of the site.

  If you use firefox, I can't use my up arrow of the page or click on the upper part of the scroll bar to make it move. Can I use the middle and the bottom of the bar. Also, I can't click on some items that are on a certain part of a web page (upper part). When I use firefox to open my email the same thing. I can't click on the upper part of the page e-mail delete tab, check e-mail tab, etc. However, I can click on it when I use internet explore so I don't know if it of a firefox issue or not. Thank you

  Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• is not compatible with the version of windows you are using, with X 86 or X 64

  My son downloaded something and now I can't use anything on my computer, I get "not compatible with the version of windows that you are using, with the X 86 or X 64... I uninstalled it but it will not go away, I tried to do a system restore, but I get the same error... ideas?

  What antivirus you typed the problem started?

  It seems fishy to me, it could be a virus that has been downloaded at a given time, perhaps even until this program was installed. I would try an online virus scanner.

  Try this: http://windows.microsoft.com/en-US/windows-vista/how-do-i-remove-a-computer-virus
  And: http://quickscan.bitdefender.com/en/ (from what I hear, it removes something fishy, so be careful!)
  But also: http://housecall.trendmicro.com/
  It should work with IE (Internet Explorer).
  Curiously, the ones I tried before I could not find, so I did a quick search and these look good.
  I forgot to ask sooner, but you can open command prompt (start > Accessories > try click right-click on command prompt, and then run as administrator)?
  I hope this helps!
  PS What version of Internet Explorer you have?

• Redirect to the same page with the values of the variables

  Hello

  I develop a form to report data of the certain date range provided by the user.

  The problem is that I have to redirect the page back to the original page with the error message "not found in the date range" If the provided date range contains all the data in the database. I am able to redirect the page to the original page for help:

  < cfif queryname. RecordCount EQ 0 >

  < cfset action 'error' = >

  < Cflocation >

  < / cfif >

  And I use the < cfparam > for the creation of an action to navigate in the code, variable

  < name cfparam = "action" default = "" >

  [Use the < cfparam > above, tag at the top of the code and using action EQ 'report' and ' ' for navigation in the code]

  But, when I redirect to the same page, with the variable value measures of error and using cflocation he forget all varable values in the new page [way], then how can I pass a variable value measures on the same page and redirect it to the same page on meeting certain criteria.

  If this isn't clear, let me know.

  Help, please

  Vijayvijay77.

  vijayvijay77 wrote:

  
  ...

  
  

  And I use

  a kind of cfif to navigate inside the code. I'm doing something wrong here.

  You say that you guessed it at work.  But you have a dangerous code here (if you have not changed).

  The line will generate variables URLS when ColdFusion processes the page.cfm file once requested by the browser.  For example url.set and url.flag.

  Tags are NOT specifying the scope of variables, so they will default to the scope of "variables".  Who are the local variables of the demand for treatment.  For example variables.set and variables.flag.

  URL.set and VARIABLES.set ARE NOT the same variables.  And this confusion can cause some VERY difficult to diagnose the problems of code.

• All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  Script launched in until OS user 'A' on the 'A' server which launches sqlplus, then connects to a remote database through a service of tnsnames.ora as another user of the database and the results of this script are spoulées on the server "A".

  The file queued on the old server is written with rw-rw-r: read write user, group read the writing, reading and possession header that is the user of the OS. The file queued on the new server is written to rw-r-r user: reading writing, reading group, public reading and ownership oracle: dba.

  "" The user then has no privileges to modify the file and continue the process of transmitting the file, editing and deleting the file for the next set of commands. This allows us to keep the possibility to migrate to the new server we are unable to process orders.

  $ORACLE_HOME/bin/sqlplus - s user/password@prd1 @./script/CustomScript/R12_OM_UFPC-oracle.sql

  Background: old server running 4.8, Oracle 10.2.0.4 OEL

  New server running OEL 6.5, Oracle 11.2.0.4

  Tested so far:

  File and update umask to 0002 instead of 0022 is now generated as rw-r-r. However, the property is still oracle: dba.

  Update of ownershipt of $ORACLE_HOME/bin/oracle.exe of oracle: oracle (edi added the user to the oracle group) and chmod 6751 oracle.exe. This created several problems where crucial scripts, that is to say of sqlplus failed to run.

  Added! chmod 755 output.file.name - OS user 'A' is not allowed to change to mod.

  Added! command cp MV output file and that generated the file as a user of the operating system: oracle. It is a potential work around in case of emergency, but the developer would have to rewrite the countless scripts.

  Any ideas?

  I have reproduced the behavior of the old server and am able to spool a file via sqlplus under OS user. No changes have been made on the remote database server. All the changes have been on the new server hosting a small 11.2.0.4 database on a server running OEL 6.5 32 - bit OS.

  (1) removed the sticky bit $ORACLE_HOME/bin/sqlplus using chmod u-s, g-s, o - s suggestion of Billy ~ Verreynne

  (2) modified the main group for the 'oracle' user match the user operating system applications, while maintaining membership in the groups 'oracle' and 'dba '.

  -We are dealing with here EDI processes, so the Group was called edi.

  (3) modified property of the files tnsnames.ora and listener.ora for oracle: edi

  (4) restart the receiver

  (5) disconnect / reconnect

  Script runs as expected, the output file contains the correct ownership and permissions.

  Thank you all for taking a look and offering options.

  -Josh

• Its results are not redirect to the respective pages

  
  Hi all

  I configured ITS Peoplesoft peopletools 8.53 and ELM 9.2 instance.

  After you have everything configured, ITS search results arrive correctly but is you click on it, it is not redirecting to the respective pages.

  This is to show the error on the page in the status bar of Internet Explore.

  Could you please help me to solve the problem.

  Thanks in advance.

  AJMAL

  Hello

  Probably you are encountering the problem that is described in this document of knowledge "My Oracle Support":

  Doc # 1551951.1: Search 'Results list' contains links that do not work because they are built with the incorrect URL

  Here is the solution:

  ------------------------

  Make sure that the content/portal URI are set correctly on all nodes the.  This can be done as follows:

  1. connect to the PeopleSoft application

  2. go to PeopleTools Integration Broker, integration configuration, nodes

  3. sort by "Local node".

  4. for any node where "node Local = 1' do the following:

  a. set up the node

  b. go to the tab "portal."

  c. ensure that the text "URI Content" and "Portal URI text" are properly defined.

  For example, if your Integration Broker is on myserver.mycompany.com:8000 and your site is called hcm, you would use these values:

  Text of the URI of the content = "http://myserver.mycompany.com:8000/PSC/hcm /"

  Portal of text URI = "http://myserver.mycompany.com:8000/psp/hcm /"

  (Write it down "/" at the end of the values.) Make sure you remember that)

  d. make sure this change is made to all nodes. For example, for HCM, this aspect should be defined for nodes PSFT_HR and HRMS.

  5. after making the above changes, you need to rebuild the search index. Do this as follows:

  a. redeploy all the definitions of research that were built with the incorrect URL as follows:

  -Go to PeopleTools, research framework, Administration, deployment/delete the object

  -Box next to the definition of inactive research

  -Click "undeploy".

  -Once finished, check the box next to the definition of research and this time click "deploy".

  b. rebuild search indexes

  -Go to PeopleTools, research, Administration, research agenda Index

  -Bring the command run to perform a build of the full Index and launch it.

  c. Once finished the process ' Building for Search Index ', re - test and verify that the problem is solved.

• Journal of R12 SSO on redirecting to the home page of R12

  Hi all

  I joined R12 with SSO. After clicking on connect, it redirects to the home page again after trying for a while to close your session in the sso page. Help, please.

  Environment, R12.1.3, Aix 6.1

  Kind regards

  Cherkaoui

  Hi Haran,

  Please confirm if the recent changes have been made, and this feature was working fine before.

  Please see if you can find more details in the log of Apache and Application files.

  Please also have a look at the notes:

  Logout link in E-business Suite does not return to the SSO login Page when using Ondaaah (Doc ID 735308.1)

  Thank you &

  Best regards

• How to redirect to the error page custom when the authorization page schema fails

  Hello
  
  I've done a permission scheme using PL/SQL function return Boolean option.
  
  I made a custom error page.
  
  I put this program in one of my pages for authorization. If the authorization scheme fails, I would like the user to be redirected to the custom error page. Currently, it displays a blank page with the mentioned in the section "identify error message displayed when plan violated" page text of the authorization.
  
  Is there a way I can make this redirect to the custom on the failed authorization error page.
  
  I am currently using Apex 3.2.0
  
  Thank you
  Pradeep

  You can create an application process when loading and subordinate to run only when you load your pages, where you want to check if the authorization is successful or not. Your authorization process should run only once per session.

  DECLARE
     v_page_id   NUMBER := 1000;                      -- your custom error page
  BEGIN
     IF     NOT apex_util.public_check_authorization ('MY_AUTH')
        -- your authorization scheme
        AND :app_page_id NOT IN (101, 1000)
     THEN
        HTP.init;
        OWA_UTIL.redirect_url ('f?p=&APP_ID.:' || v_page_id || ':&SESSION.');
        HTMLDB_APPLICATION.g_unrecoverable_error := TRUE;
     END IF;
  END;
  

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------