Hey guys, I am installing CC on my PC windows 7, but it is still 201 error, what do I do?

Similar Questions

• I am installing service pack 2 for windows vista home edition I get the error not found 0 x 80070490

  I try to install service pack 2 for windows home edition vista, I get the error not found 0 x 80070490 msicexec has an option to make extended logging, but spinstall/help shows all options.

  Split of: http://answers.microsoft.com/thread/82972695-1d12-4a07-9d72-0f9928a68dc1

  Hello

  Apologize for the delay in response. Please see the following article to resolve the issue of Service pack 2 installation:

  Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

  Note: Make sure you back up your data before you perform a repair of Windows installation.

  Hope this information helps. Back to us for assistance.

• I have Vista Home premium and you want to install Windows Defender, but however get the 08x800106ba error message.

  I have Vista Home Premium sp2 and you want to install Windows Defender, but however Gets the 08x800106ba error message.

  Where should I go from here

  Hello

  You cannot install Defender in Vista; It is already part of the Vista operating system.

  Read about Defender:

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• I installed the client 11g on windows 7, but error adapter TNS:protocol is coming

  I installed the client 11g on windows 7, but error adapter TNS:protocol is coming... Pls help urgently...

  sb92075 wrote:

  SET TWO_TASK = coredb

  Just to play devil's advocate...

  C:\>echo % TWO_TASK %

  TWO_TASK % %

  TWO_TASK = dwdevvb C:\>set

  C:\>echo % TWO_TASK %

  dwdevvb

  Scott/tiger C:\>sqlplus

  SQL * more: Production of release 11.2.0.1.0 Fri dec 13 13:02:49 2013

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  ERROR:

  ORA-12560: TNS:protocol adapter error

  Enter the user name: scott/tiger@dwdevvb

  Connected to:

  Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production

  With the option of Automatic Storage Management

  SQL >

  Under Windows, the variable is LOCAL, not TWO_TASK.  (See Ask Tom & quot; TWO_TASK environment variable on windows... & quot;)

  C:\>echo % LOCAL

  LOCAL %

  LOCAL C:\>set = dwdevvb

  C:\>echo % LOCAL

  dwdevvb

  Scott/tiger C:\>sqlplus

  SQL * more: Production of release 11.2.0.1.0 Fri dec 13 13:08:20 2013

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production

  With the option of Automatic Storage Management

  SQL >

• I am trying to install a hp deskjet 1050 J410 series but I have have the disk what can I do to install it?

  I am installing a printer hp deskjet 1050 J410 series I have no disk, what can do?

  driver 32-bit:

  Microsoft Windows 7 (32 bit)

  64-bit driver:

  Microsoft Windows 7 (64-bit)

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• I bought successively lightroom version 4, 5 and 6. LR6 is installed on a Mac. I want to install LR6 on a new windows 8, but I can't install because it asks for an earlier version.

  Hello
  I bought successively lightroom version 4 and 5 L and 6 L
  Lightroom 6, currently, is installed on a Mac
  I had installed lightroom 4 on an old PC that no longer works
  I'm install lightroom on a new windows computer 6 8
  I can't install it because on this new computer, I have never installed before ligtroom version
  Thanks for your help

  Nicole
  

  This link may help: error: "this serial number is not for a product calling it" | CS6 cs5, CS5.5,

• Hey guys [how to install on a 2nd computer]

  I am a student and I am already registered with you guys as a member student and I bought a new I mac desktop and I want to download my adobe to it programs with save them again? What to download it again to my new I have mac?

  [Title edited for clarity... MOD]

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations may NOT be used at the same time (noted in the link above of the license)

• Try to install PCI-GPIB on a Windows 7 System - x 64, variety of errors and problems

  I am trying to install a PCI-GPIB in my system Windows 7 after installing the version of NOR-488. 2 2.7.3.49152, I asked problems and the card itself interfacera not with any software. I tried to reinstall the driver several times without success.

  Problems encountered:

  No application included with NOR-488. 2 runs (welcome, troubleshooting, etc.). It will end with "The Application could not start correctly (0xc0000142)" when running.

  When I open 4.7.0f4, MAX I get no error until I try to expand the tree «Devices and Interfaces» At this point, I get:

  The nipalsys.dll plug-in caused an exception in the
  Function CmxSysExpertManager::InitializeExpert in the process of NIMax.
  See these files for more details:
  C:\ProgramData\National Instruments\MAX\Logs\20120325_152833-NIMax-
  00001BD4.log
  C:\ProgramData\National Instruments\MAX\Logs\20120325_152833-NIMax-
  00001BD4.dmp

  The log is attached.

  Finally, in Device Manager, the PCI-GPIB card comes with a yellow triangle with a point of exclamation, with the State of the device "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».

  What should I do? I found somewhere the mention of problems when computers use EAP, but my computer is x 64, and so with 8 GB of RAM is not using EAP.

  Thank you.

  I tried driver v/3.03, corrected a problem.

• I am trying to install the iphoto application in Windows 7, but it is not compatible.

  attempt to load iphoto 4 it workes on win xp but not on win 7

  Hi im trying to load iphoto 4 it worked on win xp but will not load on win 7, I think its 32 bit and I can't find an upgrade

  Hello trm765

  The ulead iphoto plus 4 program is an application created by ulead systems in 1998. I check that the center of Windows 7 compatibility for this application and, unfortunately, it is not yet listed. The only iphoto application that appears is one mentioned by Andre Da Costa. This application is no longer supported or manufactured by ulead. Check here.  To make her run, you can try to load the application in compatibility mode. This does not guarantee that it will work. In addition, if you have a product calling it Windows 7 you can download and install XP Mode for Windows 7. Once you have installed XP mode, you can then try to install iphoto here. Again, because this application is no longer supported by the developer and it is not listed on the Windows 7 Compatibility Center, it is unlikely that it will work. See the links below on how to use XP Mode and Compatibility Mode.
  Windows XP Mode
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode
  Windows compatibility mode
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
  About iphoto Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=iPhoto

• I tried to install Windows 7, but the DVD driver search. What should I do now?

  Processor (AMD FX8150) put up-to-date and RAM (4 new 1 TB HDD in RAID 10) everything elase is, that ran windows 7 Home premium 64-bit

  Try to install OS and met the apparently common request for the DVD driver

  If you have several in-house storage devices, disconnect all but the target storage device where Windows 7 is installed. If Windows 7 is installed successfully, you can attach additional storage devices.

• Try installing Silent Hunter 3 on Windows 7, but having compatibility problems

  I have silent hunter 3 and windows 7 compatible tried pro with mode and he always tells me that the installation of compet to rebout when I run troble shoting he says I have compatible proulms pleas

  Original title: isuses program compatibility

  It's not compatible win7, Silent Hunter 5 is compatible

• Pure install the OEM Version of Windows 7 re-Boot Loop after the message "preparing system for use of handguns."

  Thanks in advance for any help...

  I tried to install the OEM version of windows 7, but after "successful installation" restart the computer and it posts, I see the Windows logo, preparing for the first time use... Nothing that he stops, then reeboots.

  My characteristics are the following: I have a motherboard ASUS P5KPL-CM, processor E5200 Intel Duo Core, 4 GB RAM, 1.5 TB hard and a Radeon HD 4870 graphics card. I built myself this PC. It was Windows XP, but I formatted the hard drive to do a clean install, so now I we a Creek so to speak. Help please?

  So I fixed it!

  I do not know what was causing the boot loop, but the solution was simple. I removed my second hard drive, my video card and 2 GB of ram. I've heard say that windows 7 like no more than 2 GB of ram to install. I reinstalled from the disk, and all is well. If anyone else has this problem, it's worth a try.

• Trouble installing Civilization III complete on Windows 7 Home Premium 64-bit

  I'm trying to install CIV III complete on Windows 7, but when I get to disk 3, I get this message below and the installation fails.  Any suggestions on how to fix this problem?

  Error 1334. Cannot install the file 'Civ3ConquestEdit.exe' because the file is not found in the CAB "Data3.cab" file  This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.

  Error:-1603 Fatal error during installation.

  Consult the help of Windows Installer (Msi.chm) or MSDN for more information.

  Hello

  You are logged as administrator?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to follow the steps and check.

  1 double-click on "My Computer" on your desktop.

  2. click on the drive where you want to install the package. This is usually your drive "C:\". ». Choose "Properties".

  3. click on the security"" tab.

  4. click on the ' Add ' button.

  5. click on 'SYSTEM' under 'name '. Click on 'Add' and 'OK '.

  6. check "Allow" next to "Full control" under the heading "permissions."

  7. click on "Advanced".

  8. check "Replace entries permission on all child objects with the entries displayed here and that apply to child objects" If you are using Windows XP. Click on 'OK '. Check 'reset permissions on all child objects and enable propagation of permissions inheritable' If you use other versions of Windows. Click on 'OK '.

  9. click 'Yes' when prompted.

  10. double-click on the installation package that was previously generating the error. You won't have any problems with it.

• Install photoshop cs5 update on windows 8

  I have a new computer with windows 8.  I went to my account and downloaded cs3 and installed. Then I tried to download and install my cs5 update and it will not be installed.  She will unpack the files, but will not be at the software level. I'm guessing it may have something to do with "install as Administrator" irritation of windows 8, but I can't figure out how to make this facility as is 2 files with a downloader.  For cs3 I just save on my drive, then a click right and choose 'run as administrator '.

  How can I get my Photoshop CS5 installed?

  Thank you

  Extract the 7z with WinZip file and run setup.exe.

  Mylenium

• Hey guys, I just reset my mac OX system and wiped and Adobe, turned off my computer. I can go through re install with you?

  Hey guys, I just reset my mac OX system and wiped and Adobe, turned off my computer. I can go through re install with you?

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  .

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq