Hey guys I need help with a clipping mask. Thank you

Similar Questions

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.

• I JUST DOWNLOAD THE CC ON MY DESKTOP N HAVE NO IDEA WHERE TO START PHOTO EDITING IT S LITTLE DIFFERENT OF MY ITEM 12 NEED HELP TO FIND THE TUTORIAL THANK YOU A.S.A.P.

  I JUST DOWNLOAD THE CC ON MY DESKTOP N HAVE NO IDEA WHERE TO START PHOTO EDITING IT S LITTLE DIFFERENT OF MY ITEM 12 NEED HELP TO FIND THE TUTORIAL THANK YOU A.S.A.P.

  Start with the tutorials in the Welcome window to start and takes a course from a site like Lynda.com.

• help with a clipping mask

  I have this item and I want to add a background behind him with the clipping mask so that nothing shows up outside of my my object (bible). I went through tutorials and that works, but it never works when using this object. Can anyone watch and help with why it doesn't work.

  Here is a link to my file have Dropbox - TestIcon.ai

  Essentially trying to keep the Red inside the mask of the bible, so I can use it on my icopn bar tabe.

  Thank you

  Nick

  I'm still not clear about what you are trying to achieve because there is nothing red in your illustration. But what rcraighead said, I guess that great shape selected in your screenshot is the object that you want to use as your mask and that you want to fill with red and you want to be able to see through the mask to the illustration of the book...

  You'll need duplicate large form and make sure that it is on top of all your other items. Follow the instructions in rcrighead. If you do not want the shadow to be filled with red, do not reproduce them; just put on top.

• Need help with the error message when you try to transfer a file from one laptop to another.

  I'm trying to transfer a file from one laptop to another using Belkin transfer cable. While trying to install software for my old laptop, I get an error message as follows WET7CABLE ERROR OPEN. LOG FILE. I tried with the support of Belkin and they referred me to Microsoft. Please help me with this question.
  Thank you
  Nelson Santiago

  Hello

  It is a matter of easy transfer Windows.
  Read on this and the solution here:

  http://support.Microsoft.com/kb/980870

  Kind regards

  Joel

• Flash beginner needs help with Movie Clips/Action script

  HI -.
  
  I'm having a problem with my video clips playing simultaneously and cannot, for the life of me, know what I did wrong. I'm new to flash so I can I have created something wrong but this is what I have so far:
  
  11 layers, total: 1 layer with 10 buttons, each button with the following actionscript code:
  
  
  on (release) {}
  gotoAndPlay (85);
  }
  
  
  When the number changes with regard to keyframes, the next film is about.
  
  I have 10 films, total, but they are only video clips, mainly photo slideshow with audio, does everything in the library.
  
  The problem occurs when I click on the second or third button. Not only the movie I selected starts to play, but all previous clips are as well, he has completely blurred all the sounds. I don't know what Miss me in action script, as my Action layer has a stop command to this topic at each keyframe where there is a new clip to play.
  
  I tried to add a stopAllSounds command, but I'm afraid that does nothing because it is not an "audio file" in itself playing in the timeline panel.
  
  I'm at the end of my rope and really need help to understand this one. My project is hanging in the balance on this point, I wrote everything correctly and it works beautifully.
  
  Help, please!
  
  Thank you
  Caroline

  Start your sounds in frame 2 and place stopAllSounds() on each keyframe where begins a movieclip.

• Hey guys I need help!

  I need to start a gallery of light box with a touch of Photoshop. I've searched the forums without success... Thank you!!

  Hello

  Please take a look at this related post: http://forums.adobe.com/message/5566958#5566958

  I hope this helps.

  See you soon

  Parikshit

• Hi guys I need help with php

  Hi guys this is my problem, my site is cybid.host56.com and the page I'm having problems with is the registration page. the page is http://cybid.host56.com/register.php. all my pages are the plants but this one I can't find focus. I looked at the style sheets. global PHP. Enroll in php. but can't find the code. I've been on this 2 days but still can not find it. Help, please

  Thanks Robbie

  Everything was made a companion

  Thank you so much my friend for all your work, you're a star

  Robbie

• Win XP and Win 7 formatting issues! PLEASE, NEED HELP AS SOON AS POSSIBLE THANK YOU!

  OK, I made the mistake to download Win 7 Ultimate and install it on my Dell on XP. Bad idea. It could not pass the Windows Genuine Advantage, that it crashed and do not reboot Windows 7. I ran my backup on Win XP with SP3, install (XP) under C:\WINDOWS.old and kept the Win 7 files that I needed, my personal documents. Win 7 was in C:\Windows. I had my documents Ok, but how do I get rid of Win 7 files? Format? There is no dual boot option, such as Win 7 crashed my Dell and are basically sitting there too much space. I ran XP after installing 7. If I format, it will have negative effects on my computer? If it screws with my Dell somehow? ANSWER PLEASE THANK YOU SOON VERY IMPORTANT!

  System information:

  Dell OptiPlex GX280

  32 GB hard drive

  512 MB of RAM

  Operating system: Win XP with SP3. I want to get rid of Win 7 files.

  PLEASE PLEASE PLEASE RESPOND AS QUICKLY AS POSSIBLE, IT IS VERY IMPORTANT! PLEASE AND THANK YOU VERY MUCH!

  Asked and answered already in the other thread, you did in the forum Hardware & drivers here:

  http://social.answers.Microsoft.com/forums/en-us/xphardware/thread/995bd013-A458-4B3A-A546-e113187ff934

  Please, do not separate posts on the same subject. It's just more work for people who are trying to help you.

  MS - MVP - Elephant Boy computers - don't panic!

• I need help removing "Divx player more ' thank you!

  Original title: NEED of HELP FOR 'REMOVE' Divx more player.   Thank you

  How to REMOVE the Divx Plus Player. I would really appreciate someone to help.     Thank you

  Hello

  This article describes how to use the Add / Remove programs to change or remove a program that is installed on your Windows XP computer.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

• Need help with movie clip display and timer

  I worked on a game in flash for the last couple days and this is my first major game so there was a lot of problems.  For those who have helped so far thanks so much!

  I think that I finally got it with a few exceptions, they are.

  1. the clip that serves as my pop-up window is popping up behind all my mobile icons.  I need over them of course.

  2. I need to find a simple way to stop time while the pop up is in place and to make up the time when she disappears.

  OR

  3. I need to add 5 seconds to the game clock when the user draws a question mark to make it appear as if the clock stopped.

  If someone has an incentive it would be greatly appreciated!  Thanks in advance!

  This is my code of timer clock to date!

  onClipEvent (enterFrame) {}
  If (_root.time == 30) {}
  _root. TECH = 9;
  _root.intervaln = 30;
  }
  If (_root.time == 10) {}
  _root.intervalz = 10;
  }
  If (_root.time == 0) {}
  _root.gotoAndStop (3);
  }
  }

  Kapelski

  1. you should not set any code for an object.  all your code must be attached to frames or in classes.

  2. use swapDepths() to change the depth of a movieclip

  3. There is nothing in your code on a timer.

• Help with a clipping mask and text!

  

  This was really frustrating me.

  Design of this logo at the mo - the circle is a form and the L is just type on a separate layer on top with the same color as the background. What I want, it's to make the cut in the circle so that it is essentially transparent, where I can place on any color background and L will mix it naturally without color cast of 'L' evolving.

  Any ideas guys? With the help of CS5. I'd appreciate any help.

  Hello

  One way is to put your text and circle in a layer set, then together the mix Options: custom to zero fill and Knockout at shallow depth.

  The layer that lies directly under the layer group appear throughout the text.

  

• Need help with my Y40-80? power management

  I get message to the center of the Action as follows:

  Compatibility problem between your power management system and Windows

  Your power management system is not compatible with this version of Windows.

  The name of the model of your power management system is ACPI Lenovo compatible virtual controller.

  Can anyone help please. I have windows running Y40-80 8.1 is a clean install of windows 8.1 x 64 all drivers are up to this day, just need help with the question above thank you

  Lenovo today released a new bios update for Y40-80 laptops, I did the update and, so far, the error message that I posted above has not appeared again so set the mite of update of the bios not sure yet, I'll keep up to date on this subject and write again soon

• Satellite P205D-S7802 - need help with Wi - Fi

  I have a Toshiba Satellite P205D-S7802. I had windows Vista on it, but the time has come to reformat.

  I tried to do just the recovery disk to reset it back as long as the factory, but after using the disk a discovered I do not know where disc 2 is therefore due entirely reinstal bootleg windows xp pro.
  But now I can't figure out how to get my wireless connection to connect to it. I don't even see the wireless icon or the available tab.

  Is there a driver I need to install or what?
  Thank you for your help

  Hey,.

  Normally after the installation of the Windows operating system with a Microsoft disc, you need to install all the drivers for the hardware. So do you have yellow exclamation mark in Device Manager?

  I think that you need to install the WLAN driver too. You can download all the drivers page Toshiba or Toshiba WLAN to WLAN card Portal: http://aps2.toshiba-tro.de/wlan/

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team