Need help with movie clip display and timer

Similar Questions

• Flash beginner needs help with Movie Clips/Action script

  HI -.
  
  I'm having a problem with my video clips playing simultaneously and cannot, for the life of me, know what I did wrong. I'm new to flash so I can I have created something wrong but this is what I have so far:
  
  11 layers, total: 1 layer with 10 buttons, each button with the following actionscript code:
  
  
  on (release) {}
  gotoAndPlay (85);
  }
  
  
  When the number changes with regard to keyframes, the next film is about.
  
  I have 10 films, total, but they are only video clips, mainly photo slideshow with audio, does everything in the library.
  
  The problem occurs when I click on the second or third button. Not only the movie I selected starts to play, but all previous clips are as well, he has completely blurred all the sounds. I don't know what Miss me in action script, as my Action layer has a stop command to this topic at each keyframe where there is a new clip to play.
  
  I tried to add a stopAllSounds command, but I'm afraid that does nothing because it is not an "audio file" in itself playing in the timeline panel.
  
  I'm at the end of my rope and really need help to understand this one. My project is hanging in the balance on this point, I wrote everything correctly and it works beautifully.
  
  Help, please!
  
  Thank you
  Caroline

  Start your sounds in frame 2 and place stopAllSounds() on each keyframe where begins a movieclip.

• Need help with Exchange 2010 Diag and implementation

  I NEED HELP FOR EXCHANGE 2010 DAG AND THE IMPLEMENTATION THAT CAN HELP-IM I IN THE RIGHT SUPPORT GROUP?

  Hello HectorLopez_790,

  Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question with Exchange would be better supported in the TechNet forums.
  Click here for a link to transfer your question in the forums of Exchange.

  Thank you

  Marilyn

• Need help with keyframes for start and stop an effect

  I use a mask and blurred for a few seconds. I understand that I must use keyframes to indicate when to start and stop this effect in the video, so that the same area is not trimmed for video full.

  The problem is, I can't find help by correctly setting the keyframes. When I opened the menu keyframes in the effect, it seems that I must together for both the mask took and the blur effect. I did... to start and stop at specific times, but the rest indeed throughout the video, so of course miss me something by using keyframes. The manual to create effects is not useful. I need assistance with keyframes as what I'm doing is clearly not working. Help!

  If the mask does not move that you don't have to set the keyframe. For the blur, click the stopwatch next to 'bluriness' add keyframes as below, the Reds don't blur and blue those maximum blur this fade effect.

• Need help with movie controls (specifically the reboot)

  Hi all

  Noob question, so bear with me.

  I have a site that loads a page with video playing on one of the pages.  I put it in place so that clicking on the button of the page starts the video and clicking on a button for a another page stops the video.

  However, instead of stop the video she just paused, so that when the user returns to the page with the video the video resumes where it left off, rather than restart.

  My site as a whole is a great movie clip, so each page is not loaded when we click a button - the content is just interpolated on the stage.

  Is it possible for me to have the control to stop the film playing (other buttons on the page) or to start playback of the movie (own page button) to have restart instead of the first image?

  Code for the start is really simple:

  content_mc.about_mc. MyVideo.Play ();

  and the judgment is:

  content_mc.about_mc. MyVideo.Stop ();

  Thank you.  I know I'm asking for the wrong thing because I left speechless Google results with what I ask, helps find the right way to do it is appreciated, even if I like a lot the way the site is designed so preferably not redo the whole site would be great!

  C.

  If you do not use a pause button so you can activate your flvplayback instance autoRewind property the flv file will restart from the beginning, whenever it stops:

  content_mc.about_mc. MyVideo.autoRewind = true;

• Need help with the OSB Assign and replace the

  I have a proxy service that receives the SOAP message:

  " < = xmlns:soapenv soapenv:Envelope ' http://schemas.xmlsoap.org/SOAP/envelope/ "xmlns:SOAP - ENC =" " http://schemas.xmlsoap.org/SOAP/encoding/ "container =" " http://www.w3.org/1999/XMLSchema ">

  " < = xmlns:soapenv soapenv:Header ' http://schemas.xmlsoap.org/SOAP/envelope/ ">

  < / soapenv:Header >

  < soapenv:Body >

  " < pidx:OrderChange pidx:transactionPurposeIndicator = 'Replace' xmlns:pidx = ' http://www.API.org/pidXML "xmlns =" http://www.API.org/pidXML "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance "xsi:schemaLocation="C:\shareIt\OrderChange_1-2.xsd" > ""

  ...

  < / pidx:OrderChange >

  " < = Xmlns:ocp DeliveryInformation ' http://www.digitaloilfield.com/OCP ">

  ...

  < / DeliveryInformation >

  < / soapenv:Body >

  < / soapenv:Envelope >

  I need to take the OrderChange element and place it in a SOAP body and the DeliveryInformation element and place it in the SOAP of the same SOAP message header.

  The SOAP message is then sent to a business service that makes an HTTP POST of the SOAP XML.

  I created the service of the company and he sent some data test SOAP and it works very well, but cannot create a bridge between the Proxy and the Business Service.

  In the stream of messages of Proxy I tried to do an assignment in a routing. I tried to do the following:

  1. an XQuery query transform to generate the XML SOAP just described

  2. not the entitlement where the "Expression" is the transformation and the Variable is a variable based on a schema for SOAP.

  I can see that the company is trying to be invoked, but the SOAP data does not have to be formatted or passed.

  It is the right approach or is their a better way of

  1. create the SOAP wrapped XML

  2. call the Business Service.

  Any suggestions are appreciated. I can provide more detail if necessary.

  Kind regards.

  Thank you Vlad...

  I think I'm getting in that direction now. Just do some debugging.

  Appreciate the input. I will update with final results.

  Again, your help is greatly appreciated.

  Kind regards.

• Need help duplicate Movie Clip problem

  Here's my problem:
  First of all, I have a movie that loads an external SWF that contains several images (each of the different "module" for a product)
  Each of these modules is named "module", more the number of frame (the frame one its "module1")
  
  So in the other film, which takes care of this, I used the script to load:
  var moduleloader:MovieClipLoader = new MovieClipLoader();
  moduleloader.loadClip ("PLCbuildermodules.swf", _root.modules);
  
  So... the real clip (called "modules") I added this script:
  {We (Press)}
  moduleName = eval ("module" + _root.modules._currentframe);
  {if(this._name=="modules")}
  i ++ ;
  duplicateMovieClip (modulename, "OxygisNouveau" + i, this.getNextHighestDepth ())
  startDrag (modulename, true);
  }
  }
  
  Now the problem is basically when reproduce you them, he hangs out fine like its supposed to... but when you click again, it duplicates again. I tried to counter this with the if(this._name=="modules") {script, but without success...}
  
  I am sure that the problem is that the clip be duplicated in the parent movie clip. I just can't understand how to reproduce them outside the clip parent!
  
  I would appreciate ANY help!
  
  Thanks in advance!
  
  -Chris
  
  -EDIT-
  
  Sorry for the double post... that was an accident...:)

  Well, I used the wrong terminology (I think...)...
  I think that what I had intended to say is,

  How to duplicate a clip so that the copy can be found outside its parent?

  Thank you!

  -Chris

• Need help with how Edge displays

  Hi, I'm new to this community, and I'd appreciate any help with my problem now.

  I developed a small animation using edge, but I can't see naturally appear on the page. It "appears" out of nowhere, and it pushes down the rest of the page.

  I'm not very good at coding, it might be a code issue with the way the Web page has been designed...

  The site is here: www.marshbreweries.com

  Thanks for your help!

  Hi cargo.

  You should probably add a height in CSS value, to the div that contains your animation on board. In this way, the page will be vertical piece to the entertainment on board, before even that it loads.

• HP 15 - ac043tu: need help with the key feature and WiFi Drivers

  Hi team,

  I try to activate the key feature and WiFi in my new HP 15 - ac043tu laptop.

  I use Windows 7 Ultimate 32 operating system.

  I installed all the drivers available on the site Web of HP (http://support.hp.com/us-en/drivers/selfservice/HP-15-ac000-Notebook-PC-series/7771404/model/8326116... for my product.

  To activate the function key, I installed driver: HP System Event Utility - sp71716, but it doesn't seem to work.

  In Device Manager, network controller shows exclamation as shown below. I tried to install Broadcom and Realtek WLAN drivers, tried to turn on/off, uninstalled/reinstalled drivers referring to other positions, but that did not work.

  

  I also tried to install HP SoftPaq Download Manager, but it did not help. Tool does not show my product described.

  I went through a similar question posted by other members, but failed to get the solution. This question gave me hard times.

  Appreciate your help in this regard.

  Thank you

  Kishan

  Hello:

  You need these drivers wireless and bluetooth driver 64-bit file should have the 32-bit drivers too.

  Network controller (wireless card):

  FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71528 .exe

  Bluetooth:

  This package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

  File name: sp71440.exe

  Unfortunately, I can't help you with the next question.  The system of the event utility would be the only software I can think that would have worked.

  You can try the software HP Quick Launch, but I doubt it will work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_112835_1

• BlackBerry Z10 need help with the facebook chat and notifications

  Hey, guys.

  Since I updated to version 10.2.1.2102 of the software I was not able to receive messages from the hub of blackberry facebook chat. Before the update whenever I had my phone connected to a wireless network it was automatically getting messages facebook on the hub. Now, although I can send messages and receive messages if this contact is online, once I close the conversation hub is gone and I don't get the messages, only the "new messages of * person *" e-mail after a certain time.

  In addition, I don't get notifications about birthdays of the people. I get the "next event" x hours notification on the lock screen, if I go in the calendar I see the notification at the top of the page, but it does not sound to warn me of my birthdays from the contacts.

  Can someone help me with this two problems? Thank you!

  Fact. I needed to update the facebook app.

• Need help with an Export-CSV and ForEach loop

  Hi guys, I'm total NOOB in CLI so please forgive the stupid question.

  I need your expert advice for the very large environment and will award points.

  I have a working script that alerts to our logout ESXi hosts, maintenance and NotResponidng mode

  His job well, but need to send a mail to all three of our VCenters

  Current script only works for a VC at a time. How do I ForEach and always the hose of the same body CSV and HTML

  It would be nice to have an HTML and CSV output that looks like this (assuming that there are currently disconnected etc.)

  I have a set of credentials, that work on all 3 of my VC

  VC1

  Host1 disconnected

  Host2 NotResponding

  VC2

  Host3 disconnected

  Host4 NotResponding

  VC3

  No disconnected/maintemance/notresponding hosts for VC3

  Here is my current code, etc. of the hidden passwords >

  # Clear old sessions
  Disconnect VIServer VC01-confirm: $false

  # VC01 VC check for disconnection and Maintenance mode and does not
  SE connect-VIServer-Server VC01 - FakeUSer username-password FakePassword

  $Report = get-VMhost-State disconnected, maintenance, NotResponding | SELECT name, connectionstate

  # scan info to be html and give him a date stamp

  $ReportHtml = $report | ConvertTo-Html | Out-string

  # Write CSV file and give it a character of data

  $filePath = "C:\PS\Output".
  $filename = "VC01disconnectedHosts".
  $CurrentDate = get-Date
  $CurrentDate = $CurrentDate.ToString ('MM-dd-yyyy_hh-mm-ss')

  $Report | Export-Csv "C:\PS\Output\VC_$Currentdate.csv".

  # Send the info by Mail

  Send-MailMessage-to [email protected] - subject VMwareMorningcheckVC01$ CurrentDate '
  SmtpServer - mail.sanlam.co.za - from [email protected] '
  -BodyAsHtml-body $reportHtml - accessories 'C:\PS\Output\VC_$CurrentDate.csv '.

  Thank you in advance for help.

  You could use a ForEach loop through all vCenters and combine the results in a $1 report.

  Something like that

  $vCenters = "VC01","VC02","VC03"
  
  # Clear old sessionsDisconnect-VIServer $vCenters -Confirm:$false
  
  $report = @()# Check VC VC01 for Disconnects and Maintenance mode and Not Respondingforeach($vc in $vCenters){  Connect-VIServer -Server $vc -User FakeUSer -Password FakePassword
  
    $Report += (Get-VMhost -State Disconnected,Maintenance,NotResponding | Select @{N="VC";E={$vc}},name ,connectionstate)  Disconnect-VIServer $vc -Confirm:$false}
  
  # parse info to be html ,and give it date stamp
  
  $ReportHtml = ($report | ConvertTo-Html | out-String)
  
  # Write out CSV file and give it a Data Stamp
  
  $CurrentDate = Get-Date -Format 'MM-dd-yyyy_hh-mm-ss'$filename = "C:\PS\Output\DisconnectedHosts-$($CurrentDate).csv"
  
  $Report | Export-Csv -Path $filename -NoTypeInformation -UseCulture
  
  # Send info with Mail
  
  Send-MailMessage -To [email protected] -Subject VMwareMorningcheck$CurrentDate `-SmtpServer mail.sanlam.co.za -From [email protected] `-BodyAsHtml -Body $reportHtml -Attachments "C:\PS\Output\DisconnectedHosts-$($CurrentDate).csv"
  

  I added the property vCenter for each line in the report

• NEED HELP WITH SELECTION was GOOD AND good POWER (HP dc7900 Convertible Minitowers) MARKET

  Hello! I have a HP dc7900 in Minitour Convertible with the following specifications:

  Core 2 Quad q9400 2, 66 GHz

  nVidia GeForce GT430 1 GB

  Elpida 2x2gb RAM 800 mhz (I'll add 2 x 2 earlier so I can get 8 GB)

  Card mother HP 3032 h

  Block POWER 365 stock w.

  So I was planning to buy a Radeon HD 7770 (MSI, Palit, or Sapphire) because I have a small budget and this seems to be a good fit, but there's better food, so I was wondering if there are more good, good markets that would be able to manage my PC (with the new gpu, 8 GB of ram and a single PCIe 6-pin). I also have an MS PRO-550 Industrial, ATX in my old PC and I wanted to add, but I just discovered that it is very bad and that there actually 200w (not 550) :/ Any help would be appreciated P.S I found 'used' Corsair CMPSU-400cx and an Antec SU - 430 then how do get?

  I see that your desired card has a minimum 400W power quantity, but I recommend moving more to a 500W or 600W for handling units your other hardware too although a little extra space so you would be upgraded.

  I am very pleased with the PSU Corsair, I recently installed a CX500 in my machine, although in a smaller case, you need good cables.

  I hope this helps.

• Need help with PL/SQL so and then select

  Hello guys, I am new to the PL/SQl programming (only Java experience) and I'm pretty stuck to my task. It would be great if you could help me. I am in programming with Oracle SQL * Plus Version 10.2.0.3.0

  Whenever a user logs on to the server a database entry is created with information about the logged-on user. I need to create a PL/SQL command that selects all the information from last month. Unfortunately, the date_stamp column has a certain weird format: 1131210 for December 10, 2013

  
  

  My idea so far:
  

  
  

  DECLARE

  v_today NUMBER;

  BEGIN

  v_today: = TO_NUMBER (TO_CHAR (SYSDATE, 'MM'));       -Save the number of the month (e.g.12) in v_today

  IF v_today = 01 THEN

  SELECT * from audittrl

  WHERE the date_stamp between 1131201 AND the 1131231;

  ELSIF v_today = 02 THEN

  SELECT * from audittrl

  WHERE the date_stamp between the 1130131 AND 1130101;

  .......

  END IF;

  END;

  /

  Error code: "an INTO clause in this SELECT statement.

  I do not want to save the result to select a variable, hope you can help me. Thanks in advance.

  Hello

  6a4d1bcd-c00e-4dac-AB64-9b6bdb1652d1 wrote:

  Thanks, I'll try that, if still get caught once, I'll be back. Anway I'm not sure of the solution of Chris227, because I can't test it right now. From my point of view it gives you information the current month (e.g., December) and not the month previous (-online November), or have I missed something. ?

  You are right.  In addition, it does not for a given year.  If you have data from several years in the table, it will select lines for the month of December 2012, 2011, 2010,... but also of 2013.

  Here's a way to get around that:

  DECLARE

  prev_month_start PLS_INTEGER: = TO_NUMBER (TO_CHAR (ADD_MONTHS (SYSDATE-1)

  , "YYMM"1' "01"

  )

  );

  this_month_start PLS_INTEGER: = TO_NUMBER (TO_CHAR (SYSDATE

  , "YYMM"1' "01"

  )

  );

  BEGIN
  FOR (IN) rec
  SELECT *.
  Of audittrl
  WHERE the date_stamp > = prev_month_start
  AND date_stamp< >
  ORDER BY user_id, date_stamp - or other

  )
  LOOP
  dbms_output.put_line (rec.date_stamp);
  dbms_output.put_line (rec.event);
  dbms_output.put_line (rec.user_id)
  dbms_output.put_line (rec.host_name);
  END LOOP;
  END;

  This should also be more effective, because it will allow the optimizer to use an index on date_stamp.  Even if there is no index, it will be more effective because it avoids calling any function (for example, SUBSTR) on each line of the table.

  You needn't PL/SQL to get these results.  Just use SQL, you might say:

  SELECT event, host_name, user_id and date_stamp
  Of audittrl
  WHERE the date_stamp > = TO_NUMBER (TO_CHAR (ADD_MONTHS (SYSDATE-1)
  , "YYMM"1' "01"
  )
  )
  AND date_stamp<  to_number="" (="" to_char="" (="" sysdate="" to_number="" (="" to_char="" (="">

  
  , "YYMM"1' "01"
  )
  )

  ORDER BY user_id, date_stamp - or other

  ;

  Your front end will provide column headers and touch the data so that the columns line up.  It can also set the output to a file.  (For example, if your front-end is SQL * Plus, you can use the command of the COIL.)

  I guess date_stamp is a NUMBER.  If it is a string, the solutions above can be simplified a bit.

  This problem (and many other problems) would be so much simpler if date_stamp was a DATE column.  Using numbers or strings to store the date information is simply asking for trouble.

• Need help with virtual shelf - drag and drop between components?

  Hello

  Im trying to create a virtual shelf, where book spines are clips of individual video that can be dragged and re-ordered on the set.  For the moment I can drag the thorns to a target affected, but not just any target or "nudge" the position of other books along.

  I'm sorry that if that's a little vague I'm not experienced in as3, please do not hesitate to ask any questions and I'll do my best to answer.  IM thinking that a table is necessary which occupies the posts, but I'm not sure how to put it all together!

  Any help is greatly appreciated! The code I have so far is:

  import flash.events.MouseEvent;
  import flash.display.MovieClip;

  var dragArray:Array = [red, blue, green, purple, yellow];
  var matchArray:Array is [target1, target2, target3, target4, target5];.

  var currentClip:MovieClip;
  var startX:Number;
  var startY: number;

  for (var i: int = 0; i < dragArray.length; i ++) {}
  dragArray [i] .buttonMode = true;
  dragArray [i] .addEventListener (MouseEvent.MOUSE_DOWN, item_onMouseDown);
  matchArray [i] .alpha = 0.2;
  }

  function item_onMouseDown(event:MouseEvent):void {}
  currentClip = MovieClip (event.currentTarget);
  startX = currentClip.x;
  startY = currentClip.y;
  addChild (currentClip); bring to front
  currentClip.startDrag ();
  stage.addEventListener (MouseEvent.MOUSE_UP, stage_onMouseUp);
  }

  function stage_onMouseUp(event:MouseEvent):void {}
  stage.removeEventListener (MouseEvent.MOUSE_UP, stage_onMouseUp);
  currentClip.stopDrag ();
  var int index = dragArray.indexOf (currentClip);
  var matchClip:MovieClip = MovieClip (matchArray [index]);
  If (matchClip.hitTestPoint (currentClip.x, currentClip.y, true)) {}
  a match was found. Position the clip on the corresponding clip:
  currentClip.x = matchClip.x;
  currentClip.y = matchClip.y;
  make not draggable:
  currentClip.removeEventListener (MouseEvent.MOUSE_DOWN, item_onMouseDown);
  currentClip.buttonMode = false;
  } else {}
  football match has not, so send the clip to the back where he began:
  currentClip.x = startX;
  currentClip.y = startY;
  }
  }

  Yes, you can double click on activate your movieclips and assign the function double click listeners who use navigateToURL

  dragArray [0] .doubleClickEnabled = true;

  dragArray [0] .addEventListener (MouseEvent.DOUBLE_CLICK, f);

  function f(e:Event):void {}

  navigateToURL (new URLRequest ("http://www.adobe.com"));

  }

• Need help with query for points and polygons, 2 tables of

  Hi all
  
  I'm slowly stumbling along trying to figure things out space.
  
  I have two tables, GEO_POINTS:
  (
  DEP_ID NUMBER (12) NOT NULL,
  LINE NUMBER 4 NOT NULL,.
  MDSYS. POINT_LOC SDO_GEOMETRY
  )
  
  and POLYGON_AREAS:
  (
  POLY_NAME VARCHAR2 (120 CHAR),
  POLY_DESC VARCHAR2 (120 CHAR),
  MDSYS POLY_POINTS. SDO_GEOMETRY
  )
  
  Neither table is engraved in stone, if any, I can change some structure.
  
  I'm trying to understand how to write a query to retrieve all the points in a polygon, perhaps even with an optional buffer provided by the user.
  
  Conversely, I would probably also need to know what polygons a point would have drawn in, and it's the only request I could make any progress on.
  
  What I have so far, which is not working properly, is the following:
  
  Select * from deposits_search where dep_id in)
  SELECT dep_id
  OF geo_points, polygon_areas
  where (sdo_relate)
  poly_points,
  (SELECT point_loc
  OF geo_points
  WHERE dep_id = 10282444),
  ("mask = ANYINTERACT") = "TRUE");
  
  In the light of the foregoing, I want to select all the lines of a third table (DEPOSITS_SEARCH), for all polygons which is a point. The DEP_ID column is my primary key for most of the data tables in the database, and the number rose in my application query. However, the above returns all rows. It should only return one, because I only have a polygon of test defined so far.
  
  Any help is greatly appreciated. Thank you
  
  Bill Ferguson

  in which case you must include a line of buffer for the interaction between the points and polygons (with a stamp),

  better, you use the SDO_WITHIN_DISTANCE operator.

  http://download.Oracle.com/docs/HTML/B14255_01/sdo_operat.htm#i77653

  Not so sure what you mean with "I always have problems while providing a point location and extract the polygons that point would be plotted in" as so-called before unless you want that as a 'transitional instance of a geometry. (Specified using a variable binding or a builder SDO_GEOMETRY.) »

  http://download.Oracle.com/docs/HTML/B14255_01/sdo_operat.htm#i78531

  Read what geometry2 means in there. Read the examples and you will see that you have the geometry second in space operator as a builder. If this is what you need.

  Luke