Hi, I am unable to listen to my music on my xbox. I get the support code 80004004-04-19. Any advice?

Similar Questions

• I'm unable to get the registration code for my Blu - Ray player

  I'm unable to get the registration code for my Blu - Ray player. I followed the instructions and all I get is the statement: device is registered. I can't register for the most part without a valid code. Please let me know how I can get the correct code. Thank you

  If you were able to enter the registration code the first time you tried to save the player before then you don't need to do it again. Just bought this drive? If so, was it a screen or mixed open-box model?

• I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020

  I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020. I tried safe mode, but no luck so far

  Hello

  You are supposed to try it in "Safe Mode with network"; not 'Safe Mode'.

  You need a cable connection; no wireless using this method.

  Start method 3, etc at this link if top is not solve:

  "Error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates.

  http://support.Microsoft.com/kb/883825

  {Moderator note: Thread is placed in the appropriate forum}

  See you soon.

• Unable to get the error Code Windows Update 0 X 80076424

  When the Windows Update of Vister site I get error Code 0 X 80076424 and I am unable to find a solution, can help you?

  Thank you

  Shashi

  Hi Shashipatel,

  1. were you able to download and install updates as soon as possible?

  2 are you able to verify updates?

  3. have you made changes on the computer before this problem?

  4. What is the error message or an exact error code?

  5. have you connected external devices other than the keyboard and mouse?

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer in normal mode once the diagnosis is complete.

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.

• Unable to connect to Hotmail on my ipad 2. Get the error message that the password is incorrect.

  connection for iPad 2 Hotmail... fails to sign vew

  Received an iPad 2 for Christmas and the first thing I try to do is to add my additional emails... whenever I have try to sign in to Windows Live accounts or Hot Mail, the answer is "password" is false.  When I use the iTunes store or try to access the Windows Live accounts on computer is not a problem.  To access the iPad iTunes no problem getting online.  Is there a 'imap' etc or codes that allows to recognize emails in order for the iPad?

  Hello

  The question you have posted is related to Windows Live Hotmail; This is why it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://www.windowslivehelp.com/product.aspx?ProductID=1

  http://www.windowslivehelp.com/

• Microsoft Assistant unable to resolve the error code library; Ox8007000b

  I talked to your Elroy B staff who took my PC remotely. It has rebooted my laptop but never came back. Unfortunately, he could not solve the problem. I'm unable to open the Photo Gallery and get the error code: OX8007000b want to go back to Elroy B to continue the repair as windows still under warranty. Soon Tom

  A lot of customers that has this problem. Did the free repair Essentials and fix it but no luck. Have tried command prompt and your Elroy tried B Command Promt-dism in line/cleanup-image version: 6.2.9200.16384

  I'm on Windows 8 Windows 7 using Samsung Notebook NP355V5CA03K update

  Please notify.

  Concerning

  Tom

  I talked to your Elroy B staff who took my PC remotely. It has rebooted my laptop but never came back. Unfortunately, he could not solve the problem. I'm unable to open the Photo Gallery and get the error code: OX8007000b want to go back to Elroy B to continue the repair as windows still under warranty. Soon Tom

  A lot of customers that has this problem. Did the free repair Essentials and fix it but no luck. Have tried command prompt and your Elroy tried B Command Promt-dism in line/cleanup-image version: 6.2.9200.16384

  I'm on Windows 8 Windows 7 using Samsung Notebook NP355V5CA03K update

  Please notify.

  Concerning

  Tom

  ========================================
  When you say 'your staff' I assume you mean Microsoft.

  To-peer forum consists mainly with volunteers.
  If you would like to contact Ms support staff... I have
  Guess it would be necessary to take the same measures
  as before.

  As to the question you are trying to solve... I don't see
  One possibility is maybe worth a try.

  Photo Gallery has an exclusive database that can
  corrupted. Uninstalling / reinstalling Photo
  Gallery does not affect the database.

  I suspect that your version of the database:
  Pictures.PD6 or Pictures.pd7.

  If you are looking for and rename this database to
  something like... OLDPictures.pd6... it forces
  Photo Gallery to create a new instance of the
  the database as soon as it is launched.

  If you decide to try this... know that you
  may lose a few inches and metadata... and your
  Photo gallery will need to be filled again.

  The following article is not about Windows 8
  but would better understand the issue.

  (944221) freezes Windows Live Photo Gallery
  or does not start
  http://support.Microsoft.com/kb/944221/en-us
  (according to version, database can be
  Pictures.PD4, Pictures.pd5 or Pictures.pd6)

  The fixit in the article is the one that you have already tried
  so it will be probably useful.

  Good luck...

• Songs disappearing; error message: "unable to listen to a number of files queued. To get information about the problem, click on the icon next to each file in the list pane. »

  I get this error message: "unable to listen to a number of files queued. To get information about the problem, click on the icon next to each file in the list pane. "The thing is that he played the songs darned two days ago, what has happened since then!

  Never mind. I totally forgot that I had renamed a folder that hosts my music. Duh.

• Unable to get the Bluetooth Toshiba BT Stac Headset profile in collaboration with mic

  Hello.

  I have problems with my Motorola HT 820 Stereo headset, the Toshiba Bluetooth Stack installed on Vista Home Premium 32 bit laptop.

  I am unable to get the microphone to work at all, so can't use it for Skype / VOIP calls etc. Features such as the A2DP and AVRCP work very well, and I can listen to music via the media player without problems.

  I read in a FAQ on this site, to make sure that I use the installation option custom rather than the quick installation when adding the device, but it seems to make no difference, am I missing a step here?

  In the properties of the device Windows registry, I see the option listed for Bluetooth Mic, but even assigning as device by default does not work.

  I know to plug my headphones on my desktop PC that uses the bluetooth stack Widdcom, can I use the headset/microphone function, but this battery seems to work differently, as I can select option headphones in the bluetooth settings, but I don't see such an interior option Toshiba stack - and I think that's the problem.

  I've updated to the last stack of Toshiba on this website, but this did not help at all.

  Here, any help would be appreciated.

  Concerning

  Matt

  Post edited by: Toxyturvy - wrong spelling

  Hello Matt

  Unfortunately I can't help you with that, but if I remember right here on the BT section that someone has already asked something similar. Please take a little time and see the BT section on this forum.

  You can also visit the FAQ section on http://aps2.toshiba-tro.de/bluetooth/
  Might find something there.

  Good luck!

• I can't listen to my music with using data?

  Then I updated my iphone with its new software and now all the music that I downloaded and played my music with using one of my data and now I can't download from my icloud to listen to using any help my data?

  Hello Shirazsh,

  Thank you for using communities of Apple Support.

  I understand that you are looking for a way to listen to your music not connected to the Wi - Fi that does not use your cellular data. Take a look at this support article: Add music to the music from Apple to your library catalog

  This section describes how to do exactly what you are looking for:
  

  How to download music to listen to offline

  You can download songs, albums, or playlists on your device so that you can listen to them when you are not connected to the Internet, you need to download tracks, albums or playlists on each device that you want to use for offline listening.

  In the application of the music on your iPhone, iPad or iPod touch, or iTunes on your Mac or PC, find the song, album, or playlist that you want to download. Then:

  • On your iPhone, iPad or iPod touch: tap download .
  • On your Mac or PC: click Download .

  If you do not see or , you need to add songs, albums, or playlists in your library first.

  Best regards.

• Composition of music to listen to my music?

  Why is iTunes saying that I need a music subscription and allow data usuage listen to my music as well as having to redownload the songs I already downloaded on my phone?

  It is my understanding that you will still have access to your music. The newly developed Apple music app to date has features adapted to new music subscription service (optional) Apple. If it is that you have to 'download' your music pre-paid for your device, which leads me to believe that you have a new phone and need to do a restore of backup or something went wrong by putting your device with iTunes and your music has compromised somehow.

  Confirm that music files are still there in your iTunes or a folder of music, and then connect your phone to your computer and manually synchronize your music or download via the cloud. Whatever it is, do not need to register for Apple's music subscription if you do not want it. You will still be able to play the Beats1 Radio free but limited access to the extensive library of Apple Music from music streaming.

  Personally, I use a combination of Spotify, Pandora and downloaded music on my computer to get my fix. I think that people sometimes too locked up in ' I have to pay $10 / month, so I can get all the latest and best music, "while in reality, most of us listen to random things anyway, so why not just put a bit of effort in curating your own Spotify, Pandora and personal music playlists and settle for that? All do not have a big budget for additional subscription fees. (end rant, sorry) It's only a few extra clicks here and there to do things as I explained.

• I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. What should I do

  I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. Restarting my computer did not help. Because I had this problem I also noticed that all my favorites that I had copied in Windows Internet Explorer also disappeared. I use Firefox as my main search engine and usually do not use Internet Explorer. I am running Windows 7 on my machine.

  Try this add on the profile folder

• Cannot listen to an audio track of several registered through the recording of the cycle... ?

  I'm a new logic/Mac user, so I think I'm missing something obvious.

  I use Logic Pro X I used the cycle recording recording a few songs - but changed the following setting:

  -went to folder, duplication of Audio recordings, create titles selected and Mute under record Cycle

  -J' recorded audio takes 4-5, which was all placed in the new circuits controlled by a single potentiometer

  -When I listen to these songs at the same time, I only heard one of them at a time. If I cut one of the tracks, they all get muted. If I solo, they all get to have.

  Why don't I hear a track at a time? I want to double to the top of my voice recording, but seem not to be able to...?

  Please help, thanks!

  -Mike

  You know a little more sense, to understand what is happening.

  The "short": answer

  • In logic, a track (the way horizontal track that records your regions) and a channel strip (which is responsible for the delivery of audio) are two separate components.
  • You can create several tracks which are all assigned to the same channel strip.
  • All of these buttons Mute , Solo buttons, sliders to Volume and Pan buttons are technically identical, a representation of the coontrols of this single Channel Strip. So pressing a button Mute or Solo allows all other buttons on the pieces.
  • This is the program installation you created with the recordings option overlapping 'create tracks.
  • You must create new tracks (assigned to their own Channel Strip) or reassign these tracks and copy regions.
  • In your case, select records that overlap "create a folder to" and then choose "unpack new tracks" in the Comp Menu.

  You might get the idea that there is some learning/reading to do to be able to use logic, regardless of what you do.

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Unable to connect to iCloud music library.

  I get "unable to connect to iCloud music library.  It just started today 06/02/2016.  It has the feel of a mistake on the side server, but there is no shift down.  Everyone knows the same behavior?

  There seems to be a problem with some services from Apple at this time.

  See http://www.apple.com/support/systemstatus/ for more details.

  TT2

• I want to own and listen to my music, for the rest of my life

  I spent hundreds of dollars buying songs and albums.  I want to be able to listen to for the rest of my life.

  Some were on the CD that I had and that you put in the library, some purchased from the Apple Store and some were digital purchases from the web site of the artist.

  What happens if I change my computers to a non-Apple product or want to listen to a song that is no longer in the Apple Store?

  You can use iTunes on a Windows-based computer. And Apple's music can be used on an Adroid device.

  You can always download past purchases > download your past - purchases Support Apple

  I hope you supported your iTunes library that stores your imported CDs and the music from the artist's website.

• When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  Which is usually caused by a lack of unpacking the directive (< em: unzip > true < / em: unzip >) in the file install.rdf to this extension.

  See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking