Hi, I have a problem with SM and Bluetooth controller.

Dear support,

I have problem with Bluetooth controller and SM Bus controller. I can't find the drivers for the device:

SM Bus controller: PCI\VEN_1022 & DEV_780B & SUBSYS_216A103C & REV_16
PCI\VEN_1022 & DEV_780B & SUBSYS_216A103C
PCI\VEN_1022 & DEV_780B & CC_0C0500
PCI\VEN_1022 & DEV_780B & CC_0C05

Bluetooth controller: PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3298 & CC_0D1100
PCI\VEN_1814 & DEV_3298 & CC_0D11

I use Windows 7 also.

Hello:

Here's what I did... I have zipped and attached below in attachments, the raw smbus controller driver files to decompress and install manually.

Download and unzip the file.

Go to Device Manager and click the controller smbus needing drivers.  Click the driver tab.  Click on set to update driver.

Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

Make sure that the include subfolders is selected and the driver should install.  Then restart.

Tags: Notebooks

Similar Questions

  • I have a problem with scrolling and typing on the computer.

    Original title: I have problems with scrolling and typinging after a minute or so without the computer trying to go in the background, any help would be great because I will to throw the mouse across the screen very soon

    as noted above, totally tired, I must right click of mouse to wake up on this page, I did it while typing grrrr big time. Help pleeeease

    Hello

    Thanks for posting your question in the Microsoft community.

    I see that you have a hard time to work with the mouse.

    1. What is the brand and model of the mouse?
    2. The problem occurs on any program or when you perform a task in a particular program?

    Try these steps and see if that solves the problem of performance of your mouse.

    Method 1:

    You can check that the mouse buttons are set correct.

    Refer to the section "Change how the mouse buttons works", from following link to learn more about the same:

    Change the settings of the mouse

    http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

    Method 2:

    You can uninstall and reinstall the drivers for the mouse on your computer, to do so follow the steps mentioned below.

    a. click Start, click Control Panel , and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    b. in the Device Manager, look for the device under the mouse and other pointing devicesand then double-click the device name.
    c. click on the Driver tab, and then click uninstall the driver.

    d. restart the computer and it will automatically re - install the drivers of.

    Note:

    You can also update mouse drivers by visiting the manufacturer's Web site.

    See this link for more information:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Let us know if you need help on this question or any question about Windows.

  • I am on my second computer with display 4 k and have major problems with lightroom and photoshop crash windows 10

    During a photo this morning montage, photoshop crashed and restarted ten windows.  He did whenever I opened it.  I had to uninstall lightroom and photoshop to stop the problem.  I had this problem with another laptop.  I'm think he had back problems.  Now, I have the same problem on this news.  I don't know what to do, but it drives me crazy.

    Applications can have all of the computer of BSOD, stop, restart, or gel.

    The only things that can cause that are bugs in the operating system, bug in the drivers at the low level and the defective material.

    If you have a Nvidia GPUS with Nvidia to see if you can use their beta driver or if you need an older driver to correct their recent driver bug that causes errors in kernel_security_check.

  • When I go on some websites (such as cricinfo), I am redirected to a page of 123 find. I don't have this problem with IE, and when I re - install firefox, the problem reappears

    If I quit firefox and then restart your computer and access the page, I can go to the web site. Then very quickly, the 123 find program takes over.
    This happens at home, I have all the info here.

    Finally, the problem is solved by running malwarebytes. I've deleted and reinstalled firfox and the problem reappears. This occurred because the Trojan horse was in the plugins folder that was not deleted when firefox has been removed.
    After that the Trojan horse has been deleted by malwarebytes, the problem is not happening yet.

  • I have a problem with adding and deleting files in Windows Media Player.

    Media Player will not play the selected files but then goes on to play other files. When I delete the files from the media player and try re - add I get the message "the media player is installed incorrectly. Have tried to reinstall media player, but it always fails at the implementation stage. It seems that the link between the player and the music files has been corrupted. Further, I have not found another way to read these files! They are referred to as Windows media audio files. Is that mean that only Media Player can read? I have hundreds of music files. Any help please? I can't upgrade XP on this computer so intended to stick with it for another year or so.

    Original title: Media player 11 with XP SP3. Link to player with audio files has been corrupted?

    Hi Martyn,

    Thanks for keeping us posted and share this information with us.

    I would have you look at the article-

    http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11DF&ContextId=89&OriginalID=C00D11DF

    Back to us for any issues related to Windows in the future. We will be happy to help you.

  • Help, please! I have a problem with brushes and interface

    1. I need to make the settings for airbrush such as mode it

    to photoshop.jpg

    2 and when I use a tools of the interface, it will focus on this tool.  The shortcut does not work in this position. How to activate

    disable this option?

    PS I apologize for my English...

    If you search the web there are a large number of Photoshop brushes you can download.  Try them smoke brushes available.

  • NB510-108 problem with wireless and lan controller

    Help, please!
    (answer in German would be nice, ill try English first tho)

    I installed ubuntu 12.04 on my toshiba NB510-108 (PLL72E-00R011GR) and then I was not able to go online via wlan or lan same kable.
    After some effort to install the drivers through ubuntu I have installed windows 7 starter edition back but now windows does not install the ethernet / wireless drivers realtek or atheros network device.
    so I tried to install all the drivers wireless by http://toshiba-asia.com/sg/support/drivers/ but now when I try to run these drivers after loading them down windows 7 cannot install correctly, it says that there is a compatibility issue. I tried to run these drivers in compatibility mode for win xp sp1 and win vista sp1 without success.

    Also, I installed all the drivers for my model of http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE here with some of them have been properly installed and even when I get my system to a point where I find the two network devices work as 'good' in my windows Device Manager, the following problem occurs again:

    I can't find any of my netbook WiFi network (wlan is enabled via fn + f8) no matter what type of router I try to connect. other laptops have about no problem connecting to routers so that can't be the issue. When I click on the windows just below the wlan troubleshooting info it only says no problem could be identified (the system is in German, so please excuse my translation)

    In the information system components and devices of problem the pnp for the ethernetcontroller said pci\ven_1969 & DEV_1090 & SUBSYS... and for the networkcontroller: PCI\VEN_10EC & DEV_8176 & SUBSYS...
    If it is useful. I also wanted to put my dxdiag online file, but this extends the limit to 3000 characters.

    Someone here could help me please? It would be really nice

    Hello

    I m wondering why you have the same problems of connection using WLan and LAN.
    I mean its not really necessary to configure anything to get a connection to the local network works.
    The router must support, and DHCP must be enabled in order to assign the IP address automatically.

    I recommend that you check the TCP/IP settings in your network WLan and LAN connections.
    In TCP/IPv4, you can view the properties. The INVESTIGATION period and all other options should be set to assign automatically. You should also disable/uninstall the TCP/IPv6 and must use TCP/IPv4

    By the way: you have an antivirus and firewall software installed? If so, remember that the two don't affect the WLan/LAN connection.

  • I live in Scandinavia and have problems with commas and period in Illustrator

    I have a new IMac et have now problems with periods and commas.
    Since I live Scandinavia we use comma.

    When I for example. want a shot of 1.5 Illustrator, InDesign and other programs want to write with the "period of '

    This give me BIG problems, as when I write decimetre figures and like that
    Can you help me?

  • Problem with youtube and other video sites

    I have a problem with youtube and other video sites:

    Everything is up-to-date (flash, FF, my plug ins.) but I get crashes when loading the video. I can hear the sound but I see only the first frame of the video.

    I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.

    I hope someone can help, I looked for answers on google before and I tried everything I saw, but it did not help.

    GRTS,
    agrash

    I had the same problem, I uninstalled the plugin Flash player (Adobe Flash Player 11.0.1 152) and the problem is solved. I installed the plug-in again and the problem came back. So right now I have no flas Player liked-in, but I don't have too much problem. I hope that I will not find another problem, but it seems that everything is OK.

  • I have a problem to copy and paste the text in Photoshop

    Hello everyone,

    I have a problem with Photoshop, and I hope to find someone to help me

    Here is my problem:

    Copy of text Web, Word... to paste in photoshop does not work.

    You have a solution for this problem.

    iMac opportunity

    OS: El Capitan

    Thank you very much

    Nice day


    Alexis

    Try to clear your browser's Cache.

    ~ Assani

  • problem with drag and drop

    Hi I have a problem with drag and drop I have 2 clip and I have 2 target, I want when I drag the clip 1 to 1, target 1 to target not accepts the clip2, clip 2 can therefore be enjoy to target 2. (target 1 can accept clip 1 and clip 2, target 2 can also clip accepts 1 & 2)

    Stone

    clip_piere.addEventListener (MouseEvent.MOUSE_DOWN, dep_piere);

    clip_piere.addEventListener (MouseEvent.MOUSE_UP, arreter_piere);

    clip_piere.buttonMode = true;

    var x_piere, y_piere:Number;

    x_piere = clip_piere.x;

    y_piere = clip_piere.y;

    function dep_piere(event:MouseEvent):void

    {

    clip_piere.StartDrag ();

    }

    function arreter_piere(event:MouseEvent):void

    {

    If (place1.hitTestObject (clip_piere): place2.hitTestObject (clip_piere)) {}

    clip_piere.stopDrag ();

    clip_piere. RemoveEventListener (MouseEvent.MOUSE_DOWN, dep_piere);

    } else {}

    clip_piere.x = x_piere;

    clip_piere.y = y_piere;

    clip_piere.stopDrag ();

    }

    }

    EAN

    clip_ean.addEventListener (MouseEvent.MOUSE_DOWN, dep_ean);

    clip_ean.addEventListener (MouseEvent.MOUSE_UP, arreter_ean);

    var x_ean, y_ean:Number;

    x_ean = clip_ean.x;

    y_ean = clip_ean.y;

    function dep_ean(event:MouseEvent):void

    {

    clip_ean.StartDrag ();

    }

    function arreter_ean(event:MouseEvent):void

    {

    If (place1.hitTestObject (clip_ean): place2.hitTestObject (clip_ean)) {}

    clip_ean.stopDrag ();

    clip_ean. RemoveEventListener (MouseEvent.MOUSE_DOWN, dep_ean);

    } else {}

    clip_ean.x = x_ean;

    clip_ean.y = y_ean;

    clip_ean.stopDrag ();

    }

    }

    Here is a link to a file that I did for you based on your objects and what I described in my last answer.  I reduced the code so that the
    the objects share the same functions.  I moved the MOUSE_UP listener on stage so that it is less prone to failure should drag you the object when slide it / drop.

    http://www.nedwebs.com/Flash/AS3_Drag_Targets.fla

  • Problems with export and import

    I have a problem with export and import

    Here's what I did...
    exp "'/ as sysdba'" PARFILE=parfile.txt

PAFILE

TABLES=user1.Table1
file=Table1_1006.dmp
LOG=Table1_1006.log
query="where to_char(processeddate,'YYYYMMDDHHMISS') between to_char(to_timestamp('1911-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS') and to_char(to_timestamp('2011-10-06 16:46:26','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS')"
    Here is my log export
     set and AL16UTF16 NCHAR character set

About to export specified tables via Conventional Path ...
Current user changed to user1
. . exporting table               Table1   16019049 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.
    Then I started to import
    /database2/rdbm15> imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log

Import: Release 10.2.0.5.0 - Production on Thu Oct 6 19:57:01 2011

Copyright (c) 1982, 2007, Oracle.  All rights reserved.


Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
. importing user1's objects into user1
IMP-00015: following statement failed because the object already exists:
 "CREATE TABLE "Table1" ("APPROVALTRACEID" VARCHAR2(64), "REQUESTOR"
 "EID" VARCHAR2(9), "EID" VARCHAR2(9), "FIRSTNAME" VARCHAR2(32), "LASTNAME" V"
 "ARCHAR2(32), "MIDDLEINITIAL" VARCHAR2(8), "TIER" VARCHAR2(3), "JOBTITLE" VA"
 "RCHAR2(64), "JOBCODE" VARCHAR2(10), "EMPLOYEETYPE" VARCHAR2(2), "CONTRACTOR"
 "TYPE" VARCHAR2(2), "EMPLOYEESTATUS" VARCHAR2(2), "COSTCENTER" VARCHAR2(10),"
 " "COSTCENTERDESCRIPTION" VARCHAR2(50), "CONTRACTENDINGDATE" VARCHAR2(8), "A"
 "CCOUNTSTATUS" VARCHAR2(2), "LOGINID" VARCHAR2(70), "APPLICATIONGROUP" VARCH"
 "AR2(50), "APPLICATIONNAME" VARCHAR2(50), "APPLICATIONID" VARCHAR2(12), "LEV"
 "EL1" VARCHAR2(512), "LEVEL2" VARCHAR2(512), "LEVEL3" VARCHAR2(512), "LEVEL4"
 "" VARCHAR2(512), "LEVEL5" VARCHAR2(512), "PROFILECODE" VARCHAR2(50), "PROCE"
 "SSEDDATE" DATE, "APPROVERMANAGEREID" VARCHAR2(9), "APPROVERMANAGERDELEGATEE"
 "ID" VARCHAR2(9), "APPROVERT4MANAGEREEID" VARCHAR2(9), "APPROVERT4MANAGERDEL"
 "EGATEEID" VARCHAR2(9), "APPROVERAPPOWNEREID" VARCHAR2(9), "APPROVERAPPOWNER"
 "DELEGATEEID" VARCHAR2(9), "PERFORMEREID" VARCHAR2(9), "NATIONALID" VARCHAR2"
 "(30), "COUNTRYCODE" VARCHAR2(9), "PASSPORTID" VARCHAR2(20), "DATEOFBIRTH" V"
 "ARCHAR2(15), "CITYOFBIRTH" VARCHAR2(15), "VENDORNAME" VARCHAR2(50), "VENDOR"
 "MANAGERNAME" VARCHAR2(50), "VENDORMANAGERID" VARCHAR2(9), "VENDORADDRESS1" "
 "VARCHAR2(100), "VENDORADDRESS2" VARCHAR2(100), "VENDORSTATEPROVINCE" VARCHA"
 "R2(15), "VENDORCOUNTRYCODE" VARCHAR2(9), "VENDORZIPPOSTALCODE" VARCHAR2(9))"
 "  PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 4076863488 "
 "NEXT 1048576 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)            "
 "                   LOGGING NOCOMPRESS"
Import terminated successfully with warnings.
    but I have no lines of base2
    [server1]database2
/database2/rdbm15> sqlplus / as sysdba

SQL*Plus: Release 10.2.0.5.0 - Production on Thu Oct 6 19:59:17 2011

Copyright (c) 1982, 2010, Oracle.  All Rights Reserved.


Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL> select count(*) from user1.Table1;

  COUNT(*)
----------
         0

SQL> exit
    SQL> select * from v$version;

BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE    10.2.0.5.0      Production
TNS for HPUX: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
    Published by: user3636719 on October 6, 2011 17:23

    could ignore = y, and then try again. It should work

    Concerning
    Julien

  • Problem with XMLTABLE and LEFT OUTER JOIN

    Hi all.

    I have a problem with XMLTABLE and LEFT OUTER JOIN, in 11g it returns the correct result, but in 10g it doesn't, it is illustrated as a INNER JOIN.
    SELECT * FROM v$version;

Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE     11.2.0.1.0     Production"
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production

--test for 11g

CREATE TABLE XML_TEST(
     ID NUMBER(2,0),
     XML XMLTYPE
);

INSERT INTO XML_TEST
VALUES
(
     1,
     XMLTYPE
     ('
          <msg>
               <data>
                    <fields>
                         <id>g1</id>
                         <dat>data1</dat>
                    </fields>
               </data>
          </msg>
     ')
);

INSERT INTO XML_TEST
VALUES
(
     2,
     XMLTYPE
     ('
          <msg>
               <data>
                    <fields>
                         <id>g2</id>
                         <dat>data2</dat>
                    </fields>
               </data>
          </msg>
     ')
);

INSERT INTO XML_TEST
VALUES
(
     3,
     XMLTYPE
     ('
          <msg>
               <data>
                    <fields>
                         <id>g3</id>
                         <dat>data3</dat>
                    </fields>
                    <fields>
                         <id>g4</id>
                         <dat>data4</dat>
                    </fields>
                    <fields>
                         <dat>data5</dat>
                    </fields>
               </data>
          </msg>
     ')
);

SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
     (
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
     (
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
;

ID     DAT     SEQNO     ID_REAL
--     -----     -----     -------
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4
3     data5          
    This is all nice, now the problem:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
"CORE     10.2.0.1.0     Production"
TNS for HPUX: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production

--exactly the same environment as 11g (tables and rows)
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
     (
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
     (
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
;

ID     DAT     SEQNO     ID_REAL
--     -----     -----     -------
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4
    As you can see in 10g that I don't have the last row, it seems that Oracle 10 g does not recognize the LEFT OUTER JOIN.

    Is this a bug?, Metalink says that sometimes we can have an ORA-0600, but in this case there is no error results returned, just incorrect.

    Help, please.

    Kind regards.

    What about try the original Oracle method for outer joins? Using (+) without the extra space

    XMLTABLE(...COLUMNS ... id XMLTYPE PATH ... ) x,
XMLTABLE(... PASSING x.id ...) (+) y

  • Problems with my mini Bluetooth receiver.

    I have a problem with my mini Bluetooth receiver. I just installed Windows Vista 64-bit and downloaded the drivers for the Web site of dell for the configuration of BT, but windows says I have not installed the drivers for the BT family. What should I do?


  • I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

    I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

    You need to activate the phone. There is nothing that the phone can not be activated.

Maybe you are looking for