Hi I'm new to all this, and I have problems with an update,

Similar Questions

• I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some

  I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some people I've seen so angry about it here by searching for the answer myself.

  Thanks for sharing this, yes turning Firewall works.

  Concerning

  Stéphane

• Since the installation of Mac Mavericks all my friends with Macs and I have problems with the cursor disappears, that in Firefox, Safari is very good...

  I stopped using Firefox as nothing I've done has corrected this problem. I tried to close Firefox and restart it, I erased all my Add-ons and then added adblock back (it's the only one), but it still does not work. I deleted files so that I have more space - I can't think of anything that works. I talked to four of my friends with Macs and they are all having the same problem with Firefox since the Mavericks.

  Cursor disappears huh? It's quite strange. All of the compatibility of the Mavericks can be followed in [Bug 883824]

  Try this work around:

  1. Go to Firefox > Preferences > advanced > general
  2. Always check "use the cursor keys to navigate through the pages.
  3. Press OK.

  Or try the Mac preferences noted here: https://discussions.apple.com/message/23542890#24471966

• E4200 w 2 - re1000 and still have problems with wireless coverage

  I have a big enough House, 4500 square feet, and there a lot of bricks and stucko.  I wired ethernet ports in most of the rooms.

  For my Apple TV and tower PC, PS3, I used a wired connections.

  But we have a lot of devices without wireless, 4 laptops and 3 iphones, 3 ipads so good wireless coverage is a must.  I'm not looking for a budget solution, just the best solution that I can.  I also have a wireless baby monitor and an ATT Wireless TV receiver.  I have no end of problems with wireless on my devices.

  Without a lot of research I boght a couple re1000 thought that would be the solution to my problem, but they don't really work as well as I would like.  I wish I had done my research as I think that the right solution is to have the other AP in the connection from the House to a 'hand' AP via wired connection (connection wired bridge mode?).  I could adjust only force and channel to maximize coverage for the House.

  Here is what is a must:

  One SSID in the House

  Everything must be on the same network.  I have a wired camera Foscam and use the features of the homegroup in windows.

  Taking as a basis the e4200, what other should AP I buy to connect to the main via a wired connection?

  I don't know how to close your home is to other houses, so I don't know if you might encounter interference from 2.4 ghz to your neighbors or other sources.

  I see that WAP610 is not simultaneous... only selectable.  iPhones are only 2.4 ghz

  Whatever it is, you can keep the same SSID for your entire network, but you may need to use different wireless channels.  Everything meets your criteria above.

  The only unknown is your neighbors (and other sources) Wireless interference.

  You can download inSSIDer, which will give you a better idea of what you're against, but it is not infallible.

  http://www.MetaGeek.NET/products/inSSIDer/

• Problems reinstalling first elements 12 - bought first elements 13 and also have problems with installation, see the log. I hope you can help us?  KEJ1131

  See the log here: http://bannerportalen.dk/PDApp.log

  Best regards

  Knud Erik larger

  Issues resolved with Adobe Chat. Installed Adobe Application Manager 8.0 and YES! -no problem with reinstalling! :-)

• In Itunes and adobe reader all the latest versions have problems with the Info button.

  in Itunes no show buttons or the info for them, everything els is here, so the info botton if you move the cursor, if you can't find where they might be. Drive has the same problem but only in printing windo. Using Vista sp2 on a toshiba.

  Hi J Jewell,

  1. are you able to use other applications correctly?

  2. were you able to use iTunes & Adobe Reader correctly previously?

  3. don't you make changes on your computer before this problem?

  If you face this question only in iTunes & Adobe Reader, I recommend you to uninstall the applications of the program & features. Subsequently, reinstall them & check if the problem persists.

  To download Adobe Reader, please refer to this link: http://get.adobe.com/reader/

  To download iTunes, refer to this link: http://www.apple.com/confirm/itunes/thankyou.html

  Hope the helps of information.
  Please post back and we do know.

• Hello! I have an Acer Aspire Switch 10 and I have problems with my device audio, high fidelity. Help, please.

  This morning, my sound devices have been working well. I could still hear the sounds of him. Before blocking down, I put the volume down to 0. When I opened it again this afternoon I couldn't hear all the sounds more. Help, please!

  I have Apowersoft_AudioDevice, Intel ESS Audio Device (WDM) and Audio Codec from Realtek I2S.

  Press the logo windows + X

  Select Device Manager

  on the Device Manager, expand "sound, video game".

  check if a yellow exclamation is present

  Double-click any device available and check in the windows pop up, if the status of the device is ok, or any error is present.

  Please also download and install this:

  http://global-download.Acer.com/GDFiles/driver/audio/Audio_Realtek_0.22_W81x86_A.zip?acerid=63543086...

  then restart volume and try to play any video or audio from youtube file.

• I use Windows Vista Basic, and you encounter problems with Windows Update.

  I keep getting ""updates could not be installed"Windows automatic updating mode.» I'm also failed when I attempt to download and install the updates manually proposed. I constantly get a message, "some updates failed to install, 57F error Code. I tried several times to identify what error code means 57F but with negative results. Whatever it means, I want to fix this problem, so that I can download and install all Windows updates sent me.

  Maybe this will help. Also check out this post.

• Needing to make a larger banner and I have problems with Photoshop is very slow with the answer.

  Windows 10

  32 GB of RAM

  1 TB SSD for essential motivation

  System 64-bit

  AMD Radeon HD 7800 series graphics processor

  The banner, I'm getting is need to be 8ftx4ft. When I add more photos of her, the answer in Photoshop becomes slower I have most of the lap ram to Photoshop the project uses about 10 GB of ram! Performance its set to 80% of all the ideas on this acceleration or process to do?  It's hard doing a project and answering super slow and not be able to do great thing.

  I have not tried, but it can be useful a go.

  1 open Task Manager)

  (2) set the display to update slowly or paused

  (3) find the process photoshop.exe (Photoshop must be open)

  (4) make right click the process and set the priority of Normal to high or maybe even in real time

  This should ask Photoshop receive more CPU time.

  

• My windows defender keeps turning itself off and also have problems with Yahoo

  Original title:

  Mr. Ron Irvine * address email is removed from the privacy *.

  My windows Defender maintains itself out of service so I continue to say that

  My windows live says I need much information from my ISP (bt) which they do not understand

  By default, I bring this matter up to quarterly because it causes pain so

  I just write down the address and continue on Yahoo

  But are not Holy smoke in great disorder?

  I wonder what answers I could get!

  Ron

  Oh sorry have a peaceful and happy Christmas

  BUT as a previouis years, Scotland has a major incident in Glasgow involving death

  (Moved from E & C)

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• I lost my administrator password and now have problems with unwanted programs running at startup.

  I don't remember my password and now cannot make changes to my computer - specifically I want to stop

  unwanted running programs to the start.  It takes 13 minutes to start my computer.

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  In your case, the advice of Microsoft are re - install the operating system.

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log in to Windows and you will need to re - install Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  This is how you would normally change programs start and some programs under Tools > Options give you the ability to start when Windows starts, or not...

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• None of my screensavers does not work and that they have problems with direct3D

  Original title:

  I HAVE WINDOWS VISTA AND NOW IT SAYS SCREEN SAVER IS NOT COMPATIBLE WITH DIRECT3D, I HAVEN'T CHANGED ANYTHING WHAT CAN I

  I have windows vista home edition and have not upgraded to windows 7.  Now all of a sudden, I get a message that none of my screen savers work and they have problems with direct3D.  I don't know what happened.  What can I do? t

  Also, I need the sp1 and sp2 to upgrade my internet explore for later and I can't find these service packs for free anywhere. Please what can I do?  Thank you Tamara

  Hi Tamara,

  1. What is the brand and model of graphics card?

  2 - is the question also occur with the screen savers that come with Windows Vista?

   Download and install the latest video card driver.

  a. visit the system manufacturer's Web site, download the Vista compatible video card driver and install it.
  b. restart the computer so that the changes take effect after the driver installation.

  http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See Run the DirectX Diagnostic tool

  Now for the question of the service pack:

  How you try to install the service pack?

  You can check these links:

  Learn how to install Windows Vista Service Pack 1 (SP1)

  What's included in Windows Vista Service Pack 2 (SP2)

  How to obtain the latest Windows Vista service pack

  It will be useful.

  Please return to the State of the question.

• I have a SVRHDT1000 and I have problems of distance;

  My SVRHDT1000 is connected to a Bravia 32EX650 and I have problems with the remote control RMT-J259. I have read and tried various suggestions without success so will try to buy a new remote control. Problem is that the remote number does not appear to be updated; any advice on places where but a real replacement?

  Hi DoreiL,

  Thanks for posting your concern. Model SVRHDT1000 number you provided seems to be not not an American model, and we are not able to verify the specifications. It would be preferable for you to contact the nearest offices/Sony Sony representative of your place of residence offices in the Asia-Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  Thank you!

  Jerome

  If my post answered your question, please mark it as "accept as a Solution.