Needing to make a larger banner and I have problems with Photoshop is very slow with the answer.

Similar Questions

• Since the installation of Mac Mavericks all my friends with Macs and I have problems with the cursor disappears, that in Firefox, Safari is very good...

  I stopped using Firefox as nothing I've done has corrected this problem. I tried to close Firefox and restart it, I erased all my Add-ons and then added adblock back (it's the only one), but it still does not work. I deleted files so that I have more space - I can't think of anything that works. I talked to four of my friends with Macs and they are all having the same problem with Firefox since the Mavericks.

  Cursor disappears huh? It's quite strange. All of the compatibility of the Mavericks can be followed in [Bug 883824]

  Try this work around:

  1. Go to Firefox > Preferences > advanced > general
  2. Always check "use the cursor keys to navigate through the pages.
  3. Press OK.

  Or try the Mac preferences noted here: https://discussions.apple.com/message/23542890#24471966

• I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

  I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

  Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

• The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are security protected.

  Access to the BT hotspots.

  The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are protected from security and only the nearest BT hotspot is displayed. There are many others, but they are invisible. I think that there is a software that allows you to see several hot spots the. BT are unable to give me the details.

  This is probably a function of the driver for your wireless card.  I would check with the manufacturer of the computer or adapter.

  Good luck.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  Please contact the original publisher of the widget.

  Thank you

  Sanjit

• I have problems with the links and footer

  I have problems with hypertext links (they sparkle and also highlight other text on the page) and also the footer space for always lights in site preview mode, even though I did little master and home page and the following pages.  This happened only after I loaded a file of MUSE in the current version of Muse CC put running up-to-date on the imported file to Muse.  Please help me Adobe Community.

  Once you have opened the file 2014.3 muse you will not be able to open it in a previous version anyway. In order to keep the updated version.

  In this version, Yes, Muse will run an optimization when you open a site. My suggestion is that optimization is made to save the file, so it doesn't have to do it again. I am convinced that a full download should solve your problem. I had a few sites that I need to do a full download myself and all is well.

• Have problems with the insertion of a hyperlink in my flash with Adobe Flash CC banner

  Hi all

  have the following problem: you create a file, .fla with Adobe Flash CC (banner, consisting of six sequenced images). I want to insert a link, but does not work the clickin. What code AS3, I have to insert, if the banner is called "banner" and the link is http://www.adobe.com? (I need to another link, just for example)? I need to click on the pictures that follow after another to come on the site I want to connect it.

  Many thanks in advance,

  Kind regards

  Ruth

  How did you assign the name of the instance to the banner?  Instance names are assigned by selecting the object on the stage, and then by entering the name in the properties panel where it says .   If you happen to animate the banner before the framework where you assign the code itself, you must assign the name of all previous key frames, where the object of the banner is as well.

• E4200 w 2 - re1000 and still have problems with wireless coverage

  I have a big enough House, 4500 square feet, and there a lot of bricks and stucko.  I wired ethernet ports in most of the rooms.

  For my Apple TV and tower PC, PS3, I used a wired connections.

  But we have a lot of devices without wireless, 4 laptops and 3 iphones, 3 ipads so good wireless coverage is a must.  I'm not looking for a budget solution, just the best solution that I can.  I also have a wireless baby monitor and an ATT Wireless TV receiver.  I have no end of problems with wireless on my devices.

  Without a lot of research I boght a couple re1000 thought that would be the solution to my problem, but they don't really work as well as I would like.  I wish I had done my research as I think that the right solution is to have the other AP in the connection from the House to a 'hand' AP via wired connection (connection wired bridge mode?).  I could adjust only force and channel to maximize coverage for the House.

  Here is what is a must:

  One SSID in the House

  Everything must be on the same network.  I have a wired camera Foscam and use the features of the homegroup in windows.

  Taking as a basis the e4200, what other should AP I buy to connect to the main via a wired connection?

  I don't know how to close your home is to other houses, so I don't know if you might encounter interference from 2.4 ghz to your neighbors or other sources.

  I see that WAP610 is not simultaneous... only selectable.  iPhones are only 2.4 ghz

  Whatever it is, you can keep the same SSID for your entire network, but you may need to use different wireless channels.  Everything meets your criteria above.

  The only unknown is your neighbors (and other sources) Wireless interference.

  You can download inSSIDer, which will give you a better idea of what you're against, but it is not infallible.

  http://www.MetaGeek.NET/products/inSSIDer/

• In Itunes and adobe reader all the latest versions have problems with the Info button.

  in Itunes no show buttons or the info for them, everything els is here, so the info botton if you move the cursor, if you can't find where they might be. Drive has the same problem but only in printing windo. Using Vista sp2 on a toshiba.

  Hi J Jewell,

  1. are you able to use other applications correctly?

  2. were you able to use iTunes & Adobe Reader correctly previously?

  3. don't you make changes on your computer before this problem?

  If you face this question only in iTunes & Adobe Reader, I recommend you to uninstall the applications of the program & features. Subsequently, reinstall them & check if the problem persists.

  To download Adobe Reader, please refer to this link: http://get.adobe.com/reader/

  To download iTunes, refer to this link: http://www.apple.com/confirm/itunes/thankyou.html

  Hope the helps of information.
  Please post back and we do know.

• Have problems with the IPSec VPN Client and several target networks

  I use an ASA 5520 8.2 (4) running.

  My goal is to get a VPN client to access more than one network within the network, for example, I need VPN client IPSec and power establish tcp connections on servers to 192.168.210.x and 10.21.9.x and 10.21.3.x

  I think I'm close to having this resolved, but seems to have a routing problem. Which I think is relevant include:

  Net1: 192.168.210.0/32

  NET2: 10.21.0.0/16

  NET2 has several subnets defined VIRTUAL local network:

  DeviceManagement (vlan91): 10.21.9.0/32

  Servers (vlan31): 10.21.3.0/32

  # See the road

  Code: C - connected, S - static, RIP, M - mobile - IGRP, R - I, B - BGP

  D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone

  N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2

  E1 - OSPF external type 1, E2 - external OSPF of type 2, E - EGP

  i - IS - L1 - IS - IS level 1, L2 - IS - IS IS level 2, AI - IS inter zone

  * - candidate by default, U - static route by user, o - ODR

  P periodical downloaded static route

  Gateway of last resort is x.x.x.x network 0.0.0.0

  C 192.168.210.0 255.255.255.0 is directly connected to the inside

  C 216.185.85.92 255.255.255.252 is directly connected to the outside of the

  C 10.21.9.0 255.255.255.0 is directly connected, DeviceManagement

  C 10.21.3.0 255.255.255.0 is directly connected, servers

  S * 0.0.0.0 0.0.0.0 [1/0] via x.x.x.x, outdoor

  I can communicate freely between all networks from the inside.

  interface GigabitEthernet0/0

  Description * INTERNAL NETWORK *.

  Speed 1000

  full duplex

  nameif inside

  security-level 100

  IP 192.168.210.1 255.255.255.0

  OSPF hello-interval 2

  OSPF dead-interval 7

  !

  interface Redundant1.31

  VLAN 31

  nameif servers

  security-level 100

  IP 10.21.3.1 255.255.255.0

  !

  interface Redundant1.91

  VLAN 91

  nameif DeviceManagement

  security-level 100

  IP 10.21.9.1 255.255.255.0

  permit same-security-traffic inter-interface

  NO_NAT list of allowed ip extended access all 172.31.255.0 255.255.255.0

  IP local pool vpnpool 172.31.255.1 - 172.31.255.254 mask 255.255.255.0

  Overall 101 (external) interface

  NAT (inside) 0-list of access NO_NAT

  NAT (inside) 101 192.168.210.0 255.255.255.0

  NAT (servers) 101 10.21.3.0 255.255.255.0

  NAT (DeviceManagement) 101 10.21.9.0 255.255.255.0

  static (inside, DeviceManagement) 192.168.210.0 192.168.210.0 netmask 255.255.255.0

  static (inside, servers) 192.168.210.0 192.168.210.0 netmask 255.255.255.0

  static (servers, upside down) 10.21.3.0 10.21.3.0 netmask 255.255.255.0

  static (DeviceManagement, upside down) 10.21.9.0 10.21.9.0 netmask 255.255.255.0

  access list IN LAN extended permitted tcp 192.168.210.0 255.255.255.0 any

  access list IN LAN extended permit udp 192.168.210.0 255.255.255.0 any

  LAN-IN scope ip 192.168.210.0 access list allow 255.255.255.0 any

  LAN-IN extended access list allow icmp 192.168.210.0 255.255.255.0 any

  access list IN LAN extended permitted tcp 10.21.0.0 255.255.0.0 any

  access list IN LAN extended permitted udp 10.21.0.0 255.255.0.0 any

  LAN-IN scope 10.21.0.0 ip access list allow 255.255.0.0 any

  LAN-IN extended access list allow icmp 10.21.0.0 255.255.0.0 any

  standard access list permits 192.168.210.0 SPLIT-TUNNEL 255.255.255.0

  standard access list permits 10.21.0.0 SPLIT-TUNNEL 255.255.0.0

  group-access LAN-IN in the interface inside

  internal VPNUSERS group policy

  attributes of the VPNUSERS group policy

  value of server DNS 216.185.64.6

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value of SPLIT TUNNEL

  field default value internal - Network.com

  type VPNUSERS tunnel-group remote access

  tunnel-group VPNUSERS General attributes

  address vpnpool pool

  strategy-group-by default VPNUSERS

  tunnel-group VPNUSERS ipsec-attributes

  pre-shared key *.

  When a user establishes a VPN connection, their local routing tables have routes through the tunnel to the 10.21.0.0/16 and the 192.168.210.0/32.

  They are only able to communicate with the network 192.168.210.0/32, however.

  I tried to add the following, but it does not help:

  router ospf 1000

  router ID - 192.168.210.1

  Network 10.21.0.0 255.255.0.0 area 1

  network 192.168.210.0 255.255.255.252 area 0

  area 1

  Can anyone help me please with this problem? There could be a bunch of superfluous things here, and if you could show me, too, I'd be very happy. If you need more information on the config, I'll be happy to provide.

  Hello Kenneth,

  Based on the appliance's routing table, I can see the following

  C 10.21.9.0 255.255.255.0 is directly connected, DeviceManagement

  C 10.21.3.0 255.255.255.0 is directly connected, servers

  C 192.168.210.0 255.255.255.0 is directly connected to the inside

  And you try to connect to the 3 of them.

  Politics of Split tunnel is very good, the VPN configuration is fine

  The problem is here

  NO_NAT list of allowed ip extended access all 172.31.255.0 255.255.255.0

  NAT (inside) 0-list of access NO_NAT

  Dude, you point to just inside interface and 2 other subnets are on the device management interface and the interface of servers... That is the question

  Now how to solve

  NO_NAT ip 192.168.210.0 access list allow 255.255.255.0 172.31.255.0 255.255.255.0

  no access list NO_NAT extended permits all ip 172.31.255.0 255.255.255.0

  NO_NAT_SERVERS ip 10.21.3.0 access list allow 255.255.255.0 172.31.255.0 255.255.255.0

  NAT (SERVERS) 0 ACCESS-LIST NO_NAT_SERVERS

  Permit access-list no.-NAT_DEVICEMANAGMENT ip 10.21.9.0 255.255.255.0 172.31.255.0 255.255.255.0

  NAT (deviceManagment) 0-no.-NAT_DEVICEMANAGMENT access list

  Any other questions... Sure... Be sure to note all my answers.

  Julio

• Had a virus on the computer, deleted, now I have problems with the homegroup and DSN

  Cause of my current problem:

  2 weeks ago, I found that my computer has a virus. He removed the BFE service, firewall Windows, Windows Defender, blocked my anti-virus (Trend Micro), cut other security services... he pretty well blocked, deleted or close all my computer security programs.

  I was able to fix, but my computer did not work in the same way.

  I was able to return back BFE and Windows Firewall, turn on other security services and get up my antivirus and running. 2 weeks later my antivirus deleted 9 virus and thousand and something web threats.

  Now to my current problem:

  I was able to establish the homegroup on my computer, but when I check the files that I want to share, Save custom settings, same when I go to a folder and select 'share with homegroup' manually

  When I hit Homegroup troubleshooting need to network troubleshooting and I end up getting this error "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding"

  I tried following this threat: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/erroryour-computer-appears-to-be-correctly/aeb7b5df-55ac-456e-aba3-96f9d90898d6

  Did not work. I tried reseting my router and modem but nothing. I can't first homegroup to work if I does not resolve the DNS.

  This problem is probably due to the fact that the virus tried to redirect my DSN to computer hackers, but

  I am running Windows 7 Home Premium 64-bit

  modem: Motorola MIPDSLA

  Router: Cisco Linksys E1000

  any other information needed on my computer please let me know

  Sorry for this post is really long, I tried to summarize as much as I could

  I thank all those who took the time to re-read this threat and decided to help me.

  Although there is a small chance, you may be able to fix this on a service by service method, it is may be easier (and faster) to do a clean install.

  I would also mention that if you got a virus to trend was obviously not a very good job of protecting you.  May want to rethink the installation of malicious software program.