Hi, I put the web filtering to the general, but there are some * site that always appears. Please notify
Hi, I put the web filtering to the general, but there are some * site that always appears. Please notify
Hi EddyMoe,
You have encountered this problem because the site is not popular enough, or the content of Web site changes frequently that it has not been classified as an adult site. Security checks family with service of content classification to determine the category of the site. For more information about how Family Safety determines the web content, please refer to this article. To avoid this, you must change your level of web filter to Allow list only. To do this, follow these steps:
1. connecting the account parent in http://fss.live.com
2. under the child's name, click change settings
3. Select the Web filtering.
4 adjust the slider for web filters in list only or to your preferred configuration.
5. click on Save.
6. click onWeb filtering lists.
7. Enter the web address that you want to allow in the box and click allow.
8. click on Save.
Finally, please always remember to update the family safety filter so you can have the latest parental control settings.
Thank you!
Tags: Windows
Similar Questions
-
My windows media player mp3 music files have been deleted by mistake, they are also missing from the 'My music' file too. I got some of them to the "basket", but there are some still missing were not in the bin.
Is it possible to recover the rest of the files and put back them in 'my music '?
Have you tried to do a search. MP3 to see if
files could be somewhere else on your hard drive?See the following article:
(308895) how to search for files and folders in Windows XP
http://support.Microsoft.com/kb/308895There are programs of software designed to recover the
deleted files. The following freeware is an example...
a Google search will find more.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Recuva downloads (versions)
http://www.Piriform.com/Recuva/buildsBest bet would be a Portable version on a memory
card or a Flash drive. (reduces the risk of crushing
deleted files)Introduction of Recuva (tutorials)
http://www.Piriform.com/docs/Recuva/introducing-RecuvaRecuva - indicating what to look for
http://www.Piriform.com/docs/Recuva/using-Recuva/advanced-mode/specifying-what-to-search-forThe following article can be also worth a visit:
How to recover files deleted with free software
http://Lifehacker.com/393084/how-to-recover-deleted-files-with-free-softwareGood luck.
-
When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?
This happens usually when the import process was not completed. If you have the original camera card - or a copy of the computer of the map - you can probably use the re-import command (on the file menu) to fix things. In addition, it is possible that the original media is imported, but this transcoding was not. If you have chosen to optimise upon import, try to select clips in the browser and transcoding to optimized.
Russ
-
There are some countries that still require a paper copy to be stored even if you have the electronic signature? If so, which countries?
Hello Craig,.
You must communicate with the authorities of the local bank or the Legal Department of that specific country who need the paper copy as well.
Let me know if you have any other questions.
-Usman
-
Registered under the name of product if there are Korean internet services the quantity is I want to know how . The way which you can contact the phone? in Korea Adobe
Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
-Windows or Mac has no importance... 2 on the same operating system or 1 on each
-Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)
-
I can't send mail errors come to the top, but what are they abd that should I go?
Every time I try and send an email from windows live, a box pops up saying error that I don't know what they are, or who to ask.
Hello
E-mail for Windows Live Mail are questions in different Forums to them.
Here is a link to Windows Live Mail portal. There is a list of Forums on the right side for you to repost in:
http://windowslivehelp.com/product.aspx?ProductID=15
See you soon.
-
How to hide a column in the report when there are only zeros.
Hi Experts.,.
Is it possible to hide a column in the report when there are only zeros.
Thanks in advance
VincentVincent Krishna wrote:
Hi Experts.,.Is it possible to hide a column in the report when there are only zeros.
Thanks in advance
VincentNo out-of-the-box, but there are several workaround solutions if you want to continue an any of them:
(1) use a view selector. A single report will be a pivot table with the column, the other will have the same report less column. Users can switch reports.
(2) use a column selector. The two choices would be this column or an empty space. If white is chosen (because the user has no values), the column "will disappear" according to the report.
(3) guided use NAV. This method involves the intervention of the user. Build a small report using the single column and put a filter "is not equal to" 0. Because there is only a single column, so all lines are 0, the report returns no rows.
Use this report in the properties of guided navigation from one section of the dashboard. Assign to this "If the report returns lines" and put the report that contains the column in this section. Now add another article on your table edge and in the properties of guided navigation of this section, set on "If the report will return no rows" and it points to the small report as well. In this section, put a second version of your report without the column in it.
When the column contains all zeros, the second section with column will not display in it; the first section is not displayed. When at least a line contains a value not zero, the first section is displayed with the column, and the second part will not be.
-
I try to install creative suite 6 a disc that I bought a few years ago. I have an educational version and I have the serial number that was sent to me by e-mail from Adobe last week. My serial number is long of 20 numbers, but there are 6 boxes that appear to require 24 digits and told me that the number is incorrect. What should I do?
Using redemption code
http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html
-
MS has put the "validation failed" popups on my laptop that wouldn't go away even if I followed all the steps possible to validate my software as a real. How can I go there my LT?
-
Imports to create my destination but put the images in a subfolder under my destination (always the same name but different from my folder created under) Lightroom CC 2015.3
I solved the problem. I think that this should be addressed.
When importing from is no possibility for "put it in a subfolder when.
display all the options. But there is down to bottom left a little box that
When hovered says 'show fewer options'. When this window opens and copy
is selected, it offers the possibility to in a subfolder. Who has been
selected and the origin of the problem.
It is an option that should show the full screen, but also the show
under the screen.
Monroe
Monroe Halpern
-
I have a file of avchd about 15 min in length on a sdhc card. My camera says there is only one file. When I put the card in the PC (Win8.1), the PC says there are 2 files, a 11mins about and the other is 4 minutes long ago. If I put these files in Prime Minister CS6 they are the two identical length of 15 minutes, what is happening here?
Copy card full hard disk, and then ingest via the media browser.
See if that will make a difference.
-
Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?
Hi Comintern,
· Did you do changes on the computer before the show?
· You receive an error message or error code?
Follow the suggestions below for a possible solution:
Method 1:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.
Let us know the results.
-
Windows Mail
I have a unfinished message in "drafts". When I click on "drafts", message shows on the screen but is 'refractory', which means that I cannot work on it or send it. What
on this subject - step by step?
Thank you
Bogdan
E-mail address is removed from the privacy *.
In addition, how to activate cookies? I have accounts at multiple Web sites (like netflix, allrecipes... etc.), and whenever I go I need to sign my username, password...
I tried to follow the instructions on the Windows online help, but they are useless - I must have a university degree in computer science to be able to follow this high technology
languauge and navigate a web of Byzantines 'options', a crazy maze that could only be born in the sick minds of these stupid high school dropouts
artists such as Bill Gates, Steve Jobs (RIP)... and the rest of them.
If you, my tutor, happens to adore these punks, please disregard my harsh words and just help me.
Thank you once again!
I love the "punks", but must take over your computer and learn some things about it to use it properly.
For cookies, in Internet Explorer go to tools | Internet Options (or control panel |) Internet Options). Privacy and things together in the middle and you can adjust which sites to allow.
For the issue of Windows Mail, you can have the database corruption so try to compact and repair the database (see www.oehelp.com/WMUTil/), and then see if that helps any. Try to restart also. If you still have the problem, then look for the antivirus interference (disable e-mail analysis - see www.oehelp.com/OETips.aspx#3) and then delete your e-mail account, close and reopen WinMail and then add it back back. Also, instead of using air streams is to use the file | Save as and save the unfinished on the desktop message when you dial the it.
See if that helps.
Steve
-
How to display the list of temporary and free sites that we use?
Adobe Web Host - Free Sites.
How to display the list of temporary and free sites that we use?
When you're connected creative cloud, we used to be able to view the temporary and lots of 5 free sites that we use hoe.
Could not find a list on my creative cloud account or when the link to 'Manage' in the Muse.
No mention of the free sites in the FAQ. Is there a change in policy? Are always included in the subscription of the free sites?
- Adobe Muse help | Adobe Muse / Common Questions .
When I publish in Adobe Muse CC, must I pay for hosting with Adobe?
Adobe Muse CC allows you to publish your Web site temporary on the platform Adobe of accommodation free of charge for a trial period of 30 days. This gives you the ability to send a direct URL to your client for review. All sites with Adobe trial mode will include the field "businesscatalyst.com" in it. If you decide to take the live site by paying for monthly hosting, you can transfer your domain name and delete the subdomain businesscatalyst.com. Or you can export the HTML and host the final site with a host of your choice.
//
Yes, don't know why they took out of the cloud interface.
But if you go to http://www.businesscatalyst.com/partnerportal and you connect with your ID cloud you will have access to all your cloud sites and many other features.
-
I deleted my iphone iCloud, but there is some data in the storage, how to remove?
I deleted the account from my iPhone iCloud because I switch to Android.
But there are still a few left data on iCloud account. How to remove this account and how do I deactivate my account?
See if that helps - manage your iCloud - Apple Support storage space
Maybe you are looking for
-
File SEARCH ENHANCEMENT PACK problem...
From the start up to my office, a box will open with a folder it contains that reads: Search Enhancement Pack. It's embarrassing and I have to remove the box whenever I start. Can someone tell me how to get PERMANENTLY rid of this box?
-
I tried packerguy solution and it didn't work. Any other suggestions?
-
HELP/lack of Corrupt field...
Hi all. Using Vista 32 bit. Week last someone dropped my laptop and now it does not start correctly. Returns with... File: CLFS. SYS Status: 0xc00000e9 Required field is missing or damaged. Have tried to get into the bios etc and fix but laptop says
-
Can we call/Join webex via endpoint? If SO, HOW?
Dear community, I have a query about webex and endpoint for the client connectivity have webex software license and other end user wants to connect webex by cisco TelePresence C60. Kindly help me in this regard Thank you Arfaoui
-
I have a 2003 domain controller, this a job gives me an error "trust in relationship between the workstation and the domain failed" so I read I have to reset the server, remove the object and remove the workstation from the domain, but my problem is