Hi there... Please help!
Hi I am upgrade the ram on my hp Pavilion dm1-1111ea & I see that it can take 5 GB max. There are currently 2 x 1 GB in there... I have a 4 GB stick on its way to me... that I should
(a) get out 1 GB & install 4 GB in the newly released housing, send me the 5 GB
or
(b) install the stick 4 GB leaving free 1 (empty)
Thanks in advance for help!
You are the very welcome.
Yes, more memory is always better.
You will only see 3.2 - 4 GB of memory with the 32 bit OS, but your only other option is a 2 GB module.
You did very well, and if you want to set up an operating system to 64 bit one day, then all 5 GB will be recognized.
The laptop processor is a processor 64-bit capable. So, as long as the BIOS and the rest of the hardware can run a 64 bit OS, then you should be OK.
( (1M-Cache-1_20-GHz-800-MHz-FSB http://ark.intel.com/products/42779/Intel-Celeron-Processor-SU2300-)
Paul
Tags: Notebooks
Similar Questions
-
Computer stops in normal mode quickly. Do not use in safe mode, because I have no sound or security, please help?
Hello
Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
It is just like it loses power or stop it in the normal way? Keep in mind
This associated heat does not always mean too much heat as it is often a part or a component
who is too sensitive to normal levels even heat.Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
air vents. Check that fans are working (before and after opening the case). When your laptop on all the
You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
test).This sounds like material so if the above does not help you then probably need help
a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
Support of system Maker.===========================================================
Check with these utilities to see if information may be collected: run BlueScreenView
to see if there were any BlueScreens and verify in MyEventViewer at shutdown
(or a few seconds before) See the event log contains useful information.It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
or time of the BSOD or event to provide more information about the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it a bit before and after the time of the event or BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
application of all accidents occurred in your system. The information breaks down is extracted from the
.WER files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html------------------------------
Also do this so you can see the probable bluescreens. (You may or may not be able to see
them if they occur even after doing this according to the cause.)Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html=========================================
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
My CD/DVD player as uninstalled itself and fixed showing sound there please help me!
Hey, please tell me how I can fix my TSSTcorp CDDVDW TS - L633A ATA Device it shows in Device Manager and it says its been changed, I even tried to roll back the version and almost everything tried and still, it opens and closes but it does not appear in my computer or will not read a disc and it won't let me download a better cause it says there the last version installed so idk what to do I give up so please help...
Hello
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I opened my garageband, but I does not, because there was a question mark hollow garageband icon, then I restarted the computer, it normally restarted (whithout saying I restarted the computer because of a problem), and when it was made of built-in apps were question marks, were not in the program and "it is not found on the computer.
Please help even the app store is broken and he asked me if I would choose a program from the app store when I tried to re - download from the internet, said yes and it did not work. Help, please
The? means that the location for the file specified in the Dock cannot be found.
You said "were not in the programs.
Did you mean that they are not located in the Applications folder? Windows has a record of programs, not OSX.
You said "when I tried to re - download from the internet, said yes and it did not work."?
What happened when you tried?
The missing applications are in the purchase of the Mac App Store section?
-
I forgot my apple ID sequrity question, several times I tried to reset my sequrity question but there is no display on the window to reset (reset sequrity awnser) .please help me.thanks
Hello
You will need the answers to your security questions.
Follow the instructions here > If you forgot your Apple ID - Apple Support security questions answered
-
The Safari icon has an exclamation mark that covers. What does that mean? How can I get rid of him?
I closed my Mac and restarted but it's still there. Help please.
Susan,
Remove Safari from the dock icon. Then, go to your Applications folder and launch Safari from this location.
-
ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.
ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.
We recommend that you reset your C510 HP first. You can perform the reset by following the steps below:
1. press the "Power button" to activate the product.
2. with the product, unplug the power cord from the back of the product.
3. disconnect the power cord from the wall outlet.
4. wait at least 15 seconds.
5. plug the power cord into the wall jack.
6. reconnect the power cord to the back of the product.
7. If the product does not light by itself, press the Power button to turn it on.
Once done, print a self-test report by following the next steps:
1 load plain white paper in the input tray.
2. from the home screen on the control panel of the product, click "Menu" on the upper left side. A list of menu options screens. 3. click on "Settings" and then click on 'tools '. The maintenance of the printer menu displays.
4. in the maintenance of the printer menu, click "Printer Status Report". The product prints the report.
If the report is printed correctly, try again to print your original document.
If the problem persists, you may need to check the status of documents in the status bar. To do this, follow these steps:
1. remove the stack of paper from the status bar.
2. check that the obstacles within the status bar. A flashlight to view the mechanism inside the status bar to make sure that nothing is blocking the paper to engage with the rollers. Even small pieces of paper can cause paper feeding problems. (Important: If any obstruction is detected in the paper path, you need to refer to "Cleaning the rollers" segment at http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken)
3. to review the status of the paper and then replace any paper torn, dusty, curled, wrinkled, or bent.
4. ensure that all the papers in the stack are the same size and type. Never charge which coexist types of paper in the tray. The product can only process one type of paper at a time.
5. press on the stack of paper on a flat surface to align the edges.
6. make sure that the paper stack does not contain less than 10 and not more than 25 sheets paper.
(Note: the limitation of the number of documents applies only during the phase of solving problems.) Once the problem is resolved, you can load the tray to its original capacity).
Once you have checked the status of documents, reload the tray in the following way:
1. lift output in open position and open the door of the feeder.
2. slide the width guide to its outermost position paper.
3. Insert the stack of paper into the paper tray with the short edge forward and the print down side.
4. adjust the paper width guide so that it rests against the stack of paper.
5. lower the output tray, and then close the tray door. Once this is done, print again an automatic test report by following the above steps. If this too does not resolve the issue, refer to some more solutions at HP support center link below: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
GuruAid.com
-
Hi there I need help with my laptop my code is 55385917 please help
- Hi there, I need help wit my computer hp pavilion laptop it starts just to show enter them administration or turn on password after 3 times the disable password are 55385917 Please HELP ME because THAT ALL MY WORK IS IT ON please
Groove
Try: 40083339
Concerning
Visruth
-
CD/dvd drive does not recognize there is a cd/dvd reading - PLEASE HELP! :)
I had my hp for about 2 years and I now have a problem when I put a disk in the disk drive it recognizes not there an in there. Help, please!
It is perhaps that the laser is giving. But I saw the following steps work for many people. Taken from HP support document bph07146.
Remove the command name of Device Manager: -
My computer crashed and I reinstall first elements 7, but it will not recognize my serial number there are two on the CD case please help
When you ask a question you will need to provide some basic information
Mac or Windows and EXACTLY what version of the operating system?
Recent Mac AND Windows operating systems have been known to cause problems "weird."
Lost information - response #1 in https://forums.adobe.com/thread/2008767
Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
-http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
-
Try to download on my 2nd laptop,
but I have no serial number. Checking account and no number there. Help, please!
You have posted in a forum of creative cloud. Creative products of clouds have no serial numbers. If you do not ask about a Creative Cloud product then please indicate which product it so that your ad can be moved or managed in the right forum.
For creative cloud...
Download/install the desktop application, connect and install applications subscription.
https://helpx.Adobe.com/creative-cloud/help/download-install-app.html
-
Accidentally, I saved a PDF file in the cloud and can't be deleted from there. Help, please. I've upgraded to Adobe Acrobat Reader DC and it does not allow me to save the scans on my computer.
Or simply open CD player
Go to the Home tab then Document Cloud
Click on the PDF file to be removed
Click on remove in the top
-
I downloaded creative cloud, but when I start it there is nothing there. Help, please
Can you elaborate a little on what you see? What is the last thing you did? Which icon you have clicked on or what tab? What type of computer are you using, what OS?
Is the issue during installation or launch?
Some of these links may help:
FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?
Guinot
-
We bought a license for adobe Photoshop cs5 and the machine, we have installed this app is having hardware problem then we moved this hard drive on another machine and now there are registration conflicts, and we couldn't save it please help us solve this problem.
Most likely, you will need to contact Adobe to reset your license.
-
I can't change the creative cloud to ENGLISH, there are Chinese, please help
I can't change the creative cloud to ENGLISH, there are Chinese, please help
-
Please help me solve this problem makes me crazy. I tried to install and reinstall photoshop EXTENDED several times and each time I have lunch there ask me serial number in which I entered once, nothing happens
Hi Glenn,.
Please try the steps mentioned in the link below and see if you are able to serialize your software.
- Log, activation, or connection errors. CS5.5 and later, Acrobat DC
- Try Solution 2: clean the connection of the cached user information.
Please share the results after you perform the steps.
Thank you
Atul Saini
Maybe you are looking for
-
How do I turn OFF the fn on Sat Pro C660
Hello I have a satellite Pro C660 PSC1ME and I was wondering how can I disable the "FN" key to prevent others to pass the wifi and disable the mouse (it's a mobile multiuser). Thank you
-
When I synchronize text messages in my treo 680 not transferred into my palm desktop. How can I download text messages to my pc? Thank you!
-
mt question will be answer
-
Reset the Bios / CMOS battery
Hi guys,. Get a blank screen on the first reboot after disabling startup secure following the procedure described in this link: -. http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?sp4ts.Oid=5295884&SPF... Laptop is Produ
-
trying to figure out! Help, please!
anyone Please help if you know!so yday my computer stops on me, then when I tried to put it back on the screen read ' confuguring udates 3 3 0% complete "then after awhile it would turn off, restart and start the to new to be on the"Configuring updat