Hide parts of a page when printing on paper

Similar Questions

• OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards.

  OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards. How to change so when doc is printed can be read like a book?

  I don't know where to find and change settings.

  can you please help?

  Thanks in advance

  Anna

  Anna

  There should be an option in layout to "Flip on long edge" or "return on the short edge.  Change this setting to change the orientation of the back page.

  If this does not resolve the problem that, please indicate what operting system you have and the number of exact model.

  

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• How to change the region to fit on a single page when printing.

  Hi all

  
  

  I am only recently starting my APEX trip (and I am sure that this is where I want to stay!) please excuse any "dumb" comments I can do!

  
  

  I use APEX 5.0.3 and the universal theme.

  I followed the steps kindly provided by Christian Rokkitta on the following blog to create a tree of the Organization;

  Oracle & Apex Geekery: CSS3 Pure Org-tree with APEX list

  I only have a CSS and JavaScript knowledge, but did successfully a number of changes to meet our specific requirements. Where I fight, it's around areas of printing that do not fit on one page.

  I tried to edit the CSS, I tried to use JavaScript to open in a new window pop up, I have drawn on Print Style sheets and am currently using a modified version of the 'Standard' page template so that I can use @media Print to stop certain elements display. The CSS before I tried to use breaks page and updated scale, but after 4 days of work on anything else, but this printing problem, I'm starting to wonder if I go about it completely the wrong way.

  What is someone is able to help with the above? Basically, I need to make the organization chart fit on the single page when printing. almost as if I had 'zoom out' until it is on a single page and then print.

  I have refrained to put links or screenshots however please let me know if you need more information and I'll get it right above!

  Thanks to you all!

  Richard

  Check page 4 where I added the bottom of specific statements of style for printing.

  @media print {
    .tree li a {
      /*font-size: 15px;*/
      font-size: 0.8rem;
      line-height: 1rem;
      border: 1px solid #000000;
    }
    .tree ol, .tree ul {
      margin: 0;
    }
    .tree li::before, .tree li::after {
      border-top: 1px solid #000000;
    }
    .tree li::after {
      border-left: 1px solid #000000;
    }
    .tree li:last-child::before {
      border-right: 1px solid #000000;
    }
  }
  

• I have fonts made it difficult to Web pages when printing to PDF.

  I have fonts made it difficult to Web pages when printing to PDF.  It wasn't a problem until today.  I provided a solution through Adobe Chat, uncheck in the preferences, "rely on system fonts only; do not use document fonts. "However, I am still confused that I have not previously.  Any suggestions?

  This is your best solution.

  It can and must be set as the default for printing (Adobe PDF)

  Control Panel > printers > printer > properties > advanced (?)

  Set it and forget it. I would also go to change the default setting in other than Standard or smallest file size

• LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

  When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

  Thank you!

  Replace the cyan toner cartridge.

• Print Officejet 6000 occupies more of the page when printing duplex

  My printer is set by default to duplex print. Whenever I use my 6000 Officejet to print two-sided document printing starts just below it should be at the bottom of this page which he finished much lower than when printing a single page (from the same document).

  For example: if I choose to print a page only from multiple paged it document prints fine, exactly as displayed on the screen. However if I choose to print pages 1 and 2 then printing starts at about 5mm below printing and print finishing 15 mm below where it should be. There is no difference in the width of the impression.

  Hi @Porky007,
  
  Welcome to the HP forums!
  
  I understand that you are having problems printing duplex and I will certainly do my best to help once I have gathered a little more information
  
  1. what version of Windows or Mac do you have?
  2. is the printer connected via USB or wireless?
  3. what program you print from? Have you tried another program?
  4 what even happened if you disable duplex printing?
  5. He made it for all pages or just one?
  
  Once I have that information I'll certainly look more in things for you!
  
  In the meantime, if you are using Windows, please download and run the HP print and Scan Doctor and see if it can detect problems for you

• the white pages when printing for laserjet pro 200 color MFP M276nw

  When printing to my color Laserjet pro 200 M276nw MFP, the pages are all empty.  I tried to put off the printer and tried to have disconnected and reconnected.  That did not help.  The pages are still blank.  Any suggestions?

  You are unable to print the 'print quality Page' of the façade or do not know how?

• HP Officejet 6100 cut the top of the page when printing

  I use a printer HP Officejet 6100 with Windows 8.  Sometimes the printer has trouble grasping the page to print. Printing starts at the top of the page - cut on top of what is being printed. Does not happen all the time, but often I have to reprint for a picture with appropriate boundaries. It's printin 4 photos per page.

  Hello Jlove25,

  Welcome to the Forums of HP Support!

  When the Officejet 6100 struggled to pick up the papers, it is another type of paper that when he goes to pick it up? "The cleaning rollers would be my first suggestion, this guide will show you the rollers to clean: a ' Out of Paper ' Error Message on the computer and the printer is not Pick Up or paper feed.

  I would like to know if the cleaning help rolls the printer print on a more consistent basis for you.

• HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided

  My Hp laserjet 1022 printer working properly for years.

  So far, when he executed more paper he tried a couple of times to get more paper and then stops with a message on the PC it is out of paper.

  Very annoyingly, this has changed recently, now when it is out of paper, he tries a couple of times to get more paper and watch the message on the PC, saying that it is paper and then again, try a couple of times to get more paper and again shows the same message on the PC and him back... This continues to go on and on.

  It's especially annoying when trying to print double-sided. Before he used to stop and ask you to turn the pages to print the other side. Now the previous behavior overrides the break to turn the pages and keeps it will try to get more paper. As now, it does not wait for the user to turn the pages, in general it spoils the impression out by getting another paper that is not what I wanted, he drives me crazy! It's really hard to print anything double face now.

  All solutions?

  Operating system is Windows 7, I just downloaded and installed the latest driver for this printer "2013-01-09, Version: 20120918" and I get the same behavior. In the properties of the printer that I put some State Messages to Off and at least I don't get the full windows message screen poping up every time the printer is trying again to get more paper. I have not found all the other parameters that may affect this behavior.

  Help!

  Hello

  I solved the problem! I found the original CD for the printer. I uninstall the current driver and then install CD and now when the printer is out of paper trying to get paper a couple of times and then stops, as it used to be.

  Thanks for your help.

  Martin

• 24-page booklet adds blank pages when printing

  What the devil? I thought only divisible by 4 means that it should work. I am at a loss here. InDesign CC.

  None existed. So I just added two pages and chose to print the pages when I printed. I don't see why I should add pages to a document on page 24.

• Printing blank pages when printing from Word 2007, WordPad and Notepad, print well other programs

  Weird printing problem

  Good, in Windows Vista and using a printer HP Deskjet 645c with the updated driver, here's the weirdness:

  When printing from Word 2007, Wordpad and Notepad, the sheet through the printer appear in print, but no printing actually takes place. Same for the two existing documents and those newly created. On the other hand, everything prints normally IE8, Firefox and Adobe Reader. Reinstalled the printer driver and also to delete the Word data key in the registry. No love. Automated ran, troubleshooting of MS, but still no love because he found no problem. Someone at - it a good idea? Seems there must be something in common between Word, Wordpad and Notepad, which I suppose are at least somewhat in the code, or perhaps in the way they approach the printer driver.

  Hi TNCharlie,

  (1) I want to clarify if you arejust I try to print the text or insertion of objects into Word and WordPad?

  Fonts and graphics damaged can cause printing problems in Word/WordPad

  (2) using a wireless printer?

  Check to see if it makes a difference if connected.

  Step 1: This test in word

  1. open a new blank document in Word.

  2. on the first line of the document, type the following text:

  = Rand (10)

  3. press ENTER. This inserts 10 paragraphs of the sample text.

  4. try to print the document.

  5. If the document prints correctly, replace it with another font or insert a clip art image, a table, or a drawn object

  Step 2: Don't know if you have tried this fixit, please run the fixit available in the link below and check if that makes a difference

  Problems printing and printing errors
  http://support.Microsoft.com/GP/printing_problems/en-us

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit ourMicrosoft answers feedback Forum and let us know what you think

• Gibberish at the top of the page when printing messages

  When I print an e-mail message, it prints a few lines of gibberesh at the top. I tried different messages with the same result. It is not part of the message I read when I view the message.

  I have a snapshot, but I don't see a way to join a.

  Looks like a corrupt police, but did this just start recently?

  The header and footer appear to be printed by using your default serif font preferred (for example, Times New Roman, or Cambria).

  Message headers (from, to, date, subject) seem to use the same font, regardless of your preferences. Maybe Arial? Not sure how it is determined, set or overridden.

• print walks onto the page when printing business cards

  When I print multiple sheets of business cards printing the page begins to wander to the top of the sheet.  If I only print one page at a time, this isn't a problem.  How can I fix?   I have an Officejet Pro e8100 printer works wirelessly on a Win 7 64 bit OS Home premium.

  RickT2,

  Welcome to the HP Forum.

  If the first page prints OK and then subsequent pages tend to stick or the text wanders a bit, then perhaps adjust the media type would help.

  Assumption

  Setting the media type tells the rolls expected in what kind of paper - this could help pull the paper but at the right speed and tension to allow the text to apply to the location appropriate during each pass.

  Paper size and media Type are selected in the printing preferences:

  Control Panel > display icon > devices and printers > right click on your printer >

  Printing preferences > tab paper / quality >

  Select the paper Source > have desired / needed by printer model

  Select the paper size > have desired / necessary for the print job

  Select Support > have desired / necessary for the print job - for example: paper matte brochure for labels

  Ok

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• Print preview displays a blank page when printing, the problem is random and is fixed with a PC "restart".

  Printing results in a gray - print, nothing is printed and the dialog box notes that an error occurred during printing. I can do a reboot, the problem is resolved for a while, and then it again. Problem is obvious if printing on a page printer or ADOBE.
  I am running Firefox 30.0 on a Windows 7 system. The problem took place for several weeks.

  It is probably not everything faster that restarting Windows, but the next time this happens, could you try to erase the information that Firefox has accumulated on your printer in its preferences file? This article has more information on this option: solve the printing problems in Firefox.

  Also, if you notice any pattern of events leading up to this problem, which may help to unravel the mystery.