hide the mouse

Similar Questions

• Zoom hides the mouse cursor

  In Captivate, I added as well a zoom and a cursor in the same blade. The zoom area hides the mouse cursor, which is a problem because the idea of the zoom area has been to highlight mouse click! Yes, the mouse is above the zoom area.

  My idea is to have a small size video, with zooms on the areas I want to talk to.

  Hi again

  Okay, so it looks we are hurt to understand what you want.

  Initially, I assumed that you were unhappy that the width or the height does not reflect changes in the frame on the right for the same area.

  Am I right to say that you want to see the following behavior?

  Suppose that you have inserted a zoom area. The Zoom destination is located at 200 x 200 pixels. The Zoom area is set to 100 x 100 pixels. You change the area of Zoom 100 x 50 pixels (effectively reducing the width or the height of 50%. So, you want to verify that the Destination of Zoom is also affected by 50%. If the new Destination of Zoom and then automatically might change 200 x 100 pixels.

  What are you willing? If so, outside calculation methodically and configure manually, there is no way for that to happen. You (and those who want to achieve) must submit a form would ask.

  Until then, your best bet is to zoom in an image and not a region.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Hide the mouse in some slides.

  Hello, people!

  Here I am, once again, with news of my trip with Captivate options. First of all, my boss has decided that the best way is to leave the 'lesson' only with demonstrations of drawing and after the lesson, put the student to practice with the software.

  For those that Don t understand what I m talking about, read this.

  Now I've finished (well, editing/retouching phase) my first lesson, and have some problems to fix:

  • I recorded a few slides of assessment, to put the student click in some options in the screen and the mouse appeared in all the time. There's a way to really hide the mouse, in the presentation? I Don t want the mouse appear when the student is one who will need to click in a box, or type something... I just want the mouse appear in the moments when I m showing something in the screen... Is it possible?
  • In some slides, my text caption boxes are "fading" (become very opaque at the end of the timeline), while it waits for the student to click in the clickbox? I Don t know what exactly...

  Well, for now, is it. I'll come with more, when I'm at the end of the lesson.

  Indeed, please keep this button 'maintain proportions' enabled.

  Captivate is indeed wonderful software for e-learning. If you already try to get training in Flash, similar to what you can get in first Grade (as I did long ago...) you need to fall in love with this program. I hope I was helpful.

  Lilybiri

• Hide the mouse on two screens

  I have a FLEX project that I export in the ATMOSPHERE. It has two separate windows which communicate with each other, located on different screens. I dynamically resizes windows (their definition in full screen after moving them to the necessary screen). Then I call Mouse.hide () on both windows. However, the mouse cache do unless I click on both screens.

  The problem is that there is a kiosk, and there is no way to click on the other screen because our only interface is a touch screen on one of the screens. I tried to move the focus between windows, but that doesn't seem to work. So, I tried this:

  [CODE]

  Development of switching
  controlScreen.alwaysInFront = false;
  controlScreen.enabled = false;
  videoScreen.alwaysInFront = true;
  videoScreen.enabled = true;
  videoScreen.activate ();
  Get the update
  videoScreen.alwaysInFront = false;
  controlScreen.alwaysInFront = true;
  controlScreen.enabled = true;
  controlScreen.activate ();

  [/ CODE]

  This, however, does not. Does anyone have an idea what I could do to make the mouse actually disappear? I tried calling Mouse.hide () in different places and at different times during the program to run, and it is not good...

  If you want more details, please. I would be happy to share more.

  It turns out that every window has a cursorManager object. Therefore, to remove the sliders, we must first cross the managor cursor of all custom cursors, and then hide the system mouse in each window. So:

  [CODE]

  First, we remove all the connections to the cursors through the cursorManager, then hide the System Manager, leaving us without any visible cursor.
  this.cursorManager.removeAllCursors ();
  Mouse.Hide ();

  [/ CODE]

  If you add a feature to the other screen (I called mine loadedAndPlaced()), you can call this after you set and redimensionnerez the other window you create using actionScript. It has worked flawlessly.

• Hide the mouse only partially sovereign funds

  I looked around and could not find something to do, but I think that thoeretically it's possible.
  
  I don't want the visible mouse unless it's over controls on the back of the stage.
  I have a large stage area and on the bottom is a button that I need to have the visible mouse so that people can see click.
  However I will not be visible if it exceeds a certain coordinate y of the mouse. Is there a way to hide it with a simple mouse and mouse view orders?

  onMouseMove = function() {}
  If (_xmouse > 0 & _ymouse > 200) {}
  Mouse.Hide ();
  } else {}
  Mouse.Show ();
  }
  }

• MX:HBox display hide the mouse on

  Hi all

  How easy / possible is it to add the function of hover mouse to a HBox.

  So that when you hover over it shows, and when you take off your mouse it masks?

  Hello

  Something like that?

  ' mouseOver = "hb.visible = true" mouseout/mouseouthandler() ="hb.visible = false".

  borderColor = "#0C0E10" cornerRadius = "5" borderStyle = "solid" >

  David.

• The mouse pointer does not hide when you type, even with the box checked.

  Hello everyone.  I turned on the check mark in the properties of the mouse "hide the pointer during the strike".  However, the mouse pointer does not hide when typing, but instead remains visible all the time.

  No one knows why this happens?  In previous versions of Windows, the pointer should simply disappear when keystrokes are typed, and then reappear when the mouse is moved.  Is not the case here!

  Thanks for any information!

  System details:

  Windows Vista Ultimate x 64 SP1, 4 GB ram
  Intel Core2 3.16 GHz cpu
  NVIDIA GeForce 8800GT with two monitors
  Aero is enabled.

  Hello

  Welcome to the community of Windows Vista.

  1. what application you are working on when you encountered this problem?

  Hide the mouse pointer option allows you only to remove the mouse curzor of
  the focus in the working window so that the cursor does not cover the text or the pitcure you see.

  Make sure that the curzor of the mouse is placed inside the app as you type, as it does not hide the mouse, if it is outside of the application.

  Change the settings of the mouse
  http://windowshelp.Microsoft.com/Windows/en-us/help/efd700f8-bbc0-4F04-9f78-3bdb4bbf47011033.mspx#EKD

  Kind regards

  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can we hide/show the mouse with an Action or Script?

  Hi all

  I'm developing a simulation using boxes to click in Captivate 4, on Windows XP. If the user clicks in the right place, the slide continues and shows the user what to do. If the user clicks on the exact spot, the simulation goes directly to the next slide. The problem is, successful or not, when the user moves to the next slide, saved the mouse pointer displayed on the slide. If I hide the mouse, then it remains hidden, even if the user clicks outside the box too many times and the simulation continues to show the user what to do. It's like things on the screen just select or click on themselves.

  I know the visibility of the mouse is used differently in the timeline to other objects. This isn't a particularly big deal, as long as there is a way to control the visibility of the mouse for simulations (one of the main points of sale of Captivate). Is there a way to control the visibility of the mouse with an Action or Script?

  The current settings for my click boxes are:

  

  I tried to assign an Action (several actions, really) to hide, display, activate or deactivate the mouse but the mouse doesn't seem to be available to do!

  

  Am I missing something?

  Thank you

  ~ jeff

  Jeff,

  No problem, looks like an argument anyway you look at it. With the idea of image of concealment, just to clarify, you shouldn't have to reframe the context if you can get out with the help of the entire background graphic. All your background images are already in the library of backgrounds folder, so if you drag and drop the background image of the library on the slide, you can instantly use it as a picture rather than just a background image object.

  Just a thought, again in the case that it helps.

  d

• Limit the movements of the mouse in Authorware

  Hi all

  
  I try to limit the movements of the mouse of a user in Authorware. So far, I was able to do something that changes the cursor when it is over a square (mobile area). However, I missed out yet how to limit the mouse to go outside the edge of the square. Thinking has been to follow the point where the user has left the square with the cursor and set CursorX and CursorY to these values. However, these system variables cannot set a value, read only (AFAIK). Did anyone have any suggestions?

  Kind regards

  Frank

  Cannot be done with Authorware alone...

  Easy solution - use the SetCursor function to hide the mouse (4) when he leaves the defined area, set it to the arrow (0) when he enters. Don't forget to put the arrow, so when you leave the page otherwise.

  More difficult, but what you need – load the SetCursorPos of WinAPI.u32 function that allows you to actually set the cursor position... then as above, when the cursor leaves the area defined, to put back...

  Help?

  Erik

• The location of the mouse can be set?

  Is it possible to control the position of the mouse in a view? I want to create a "sticky" mouse keeps it the mouse doesn't move when the mouse is moved in a given limit.

  Hide the mouse: Mouse.hide ();
  then place an image in a display object where the coordinates of the graphics take the mouseX mouseY coordinates.

• Hide/show the mouse above - help?

  Hello

  Im trying to create the effect where when I mouse over a specific area on the stage, it triggers a box to appear on the whole scene & then once that I mouse the box disappears.

  I will attach a few screen grabs of what Im trying to achieve.

  I have a few general conditions that must be on my banner but I just want to show up on the mouse.

  Any help would be great - thanks

  

  Hey bretti,

  I don't know what exactly what you want to say sorry, but which should hopefully help somehow:

  Some of the things that I will by you already have, but I'll go just in case top.

  From what I see in the examples that you put your animation in the main timeline, the symbol 'terms' are trying to put the symbol:

  

  It should look at it give or take the length of you animations when your done:

  

  As you can see in my example I {} on the timeline:

  

  (this is called a trigger when on the timeline, it is manufactured by CTRL + t). Inside of this, I have the code

  

  This will stop the timeline plays beyond that point. I also have:

  

  It is what is called a label (this is done by CTRL + l) I renamed mine to 'open' and 'close '. When the mouse over is used:

  

  This decomposed code means system go into the 'conditions' symbol and the name tag plays 'open' (you can use it with any symbol and label for example sym.getSymbol("any_symbol_you_have_made").play ('any lable in the symbol, you just named")). He will play the animation of the label, that means playing 'close' will play all the animations after the narrow label until the end or a trigger with sym.stop ();

  A few other things I noticed:

  you have a Text2? as if no file:

  

  If you try to use an item in the code that does not exist then it errors. (edge does not tell you what well).

  You can remove the code hide for your text and move the text in the 'conditions' symbol and he animated with box so that the text doesn't seem fair to nowhere?

  hope this helps

• Hide the subnavigation on mouse out?

  Can someone find it? I'm completely stuck on it - I need the subnavigation hide on mouse out. If the user hovers over the main navigation - sub appears and is very annoying and confusing for the Viewer. I can get the subnavigation to disappear on mouse click, but when I put it hide on mouse out, he wants to hide whenever the user moves between different buttons. Probably confusing to understand without seeing the file. I put it up on top of www.imicci.com/file/file.fla.zip Can someone please check it for me? I am so frustrated with this. If there is another way to view this flash file I can do too - let me know. Thanks to you all!

  so a quick and dirty solution to feel good is to do the following...

  (1) make an invisible button that surrounds all the way to your submenu.
  (2) turn it on when someone rolls over your original button (kill the onRollOut as)
  (3) put an OnRollOver() action on your new button that does the same thing, just like the previous button of deployment. Be sure to flip, he kills both actions.

  Like I said, it's dirty, but it works. You can also code around your problem.

  HH

• Hide a menu until the mouse over an object?

  I'm pretty new to Muse, but I looked extensively around the web and have not found a good answer to my question:

  I have a menu that I created with the menu widget, but I want to be hidden or do not appear until the mouse over an object, such as a rectangle that I created on the page. Is there a simple way to do this? It would be as well to the "originating" menu where the mouse pointer is over the object.

  Thanks for the help!

  Yes, absolutely you can do. Just use the ToolTip widget and the place in the target zone and what you want, your clicked menu on the area of the trigger.

• How to hide the music with iOS 10 offline?

  I would like to hide it bought songs, that I deleted in my music. This way to hide the songs offline.

  Hi HM57,.

  Thanks for your questions, but I'm not sure what you're trying to ask. I see this one of two ways. The first is that you want to hide your purchases so that you don't see them on your iPhone. The second is that you only want to see content downloaded to your iPhone. I can answer these for you two.

  To start with the first scenario, you can hide purchases from the iTunes Store. To do this, you will need to use iTunes. Access your purchased content as if you were to download it again. When you move your mouse over the content, you will see an X in the upper corner of the work. Click on that and you will see the option to hide the content you've purchased. This will ensure that when you look at your iPhone and the content is not downloaded, you will not see it.

  Take a look at the article below for more details.

  Hide and show the purchases made on the iBooks Store, App Store or iTunes Store
  https://support.Apple.com/en-us/HT201322

  For the second scenario, you can only view content downloaded to your iPhone. To accomplish this, open the music application and make sure that you are on the Library tab. You should see and option for downloaded music. Tap that and you will see the downloaded content. For reference, see the image below.

  

  Nice day

• How can I stop Firefox toolbar pop up when the mouse is above the screen mode full screen (without kiosk mode, please)?

  I don't want the toolbar always there (so disable auto hide does not solve the issue). I would prefer a right-click or use a combination of keys to retrieve the toolbar. The toolbar arise at any time that the mouse is near the top of the screen is too distracting. It should be an option, users can enable or disable or card for anything other than the mouse hovering. The only solution I've seen mentioned is to go the full kiosk with something like R-kiosk, but it's really a too extreme solution to a simple problem. Is there a setting already hidden in the topic-config for this problem or is it a feature request? Thank you.

  There is no built-in way to disable this feature to display the toolbars when you move the mouse to the top.

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #fullscr-toggler { display:none!important; }
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
  • Paste the code in the userChrome.css file in the Editor window
  • Make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file